Abstract
While high-performance organic fibres such as poly (para phenylene benzobisthiazole) and Kevlar possess excellent mechanical properties under axial tension, their strength under compression is generally poor. This study focuses on a polymer infiltration approach to modify the mechanical properties of the Kevlar 49 fibre in tension as well as compression, in which various polymeric resins are infiltrated in an opened fibrillar network of Kevlar single filaments. Opening was achieved using concentrated sulfuric acid, which resulted in a strength loss at high acid concentrations. However, compared to the acid-treated fibre, both the tensile strength and strain-to-failure of the fibres were found to increase after infiltration with epoxy resins and bismaleimide polymers. Polymer infiltration also resulted in a significant improvement in the compressive strength of the Kevlar fibre, with the bismaleimide performing better than the epoxy resins. Plasma modification using ammonia was also used to enhance interfibrillar adhesion by incorporating reactive amine groups on the fibril surface
Similar content being viewed by others
References
H. H.Yang (ed.), “Kevlar Aramid Fiber”, (Wiley, Chichester, 1993).
S. J.deTeresa, R. J.Farris and R. S.Porter, J. Mater. Sci. 23 (1988) 1886.
J. H.Greenwood and P. G.Rose, 9 (1974) 1809.
S. V.Kulkarni, J. S.Rice and B. W.Rosen, Composites 6 (1975) 217.
L.Sawyer and M.Jaffe, in “High Performance Polymers”, edited by E. Baer and A. Moet (Hanser, New York, 1991) p. 55.
L.Konapasek and J. W. S.Hearle, J. Appl. Polym. Sci. 21 (1977) 2791.
M.Panar, P.Avakian, R. C.Blume and K. H. J.Gardener, Polym. Sci. Polym. Phys. Ed. 21 (1983) 1955.
M. G.Dobb, D. J.Johnson, A.Majeed and B. P.Saville, Polymer 20 (1979) 1284.
R. J.Morgan, C. O.Pruneda and W. J.Steele, Polym. Sci. Polym. Phys. Ed. 20 (1983) 1757.
Y. C.Lee and U.Santosh, Polym. Eng. Sci. 33 (1993) 907.
Idem, US Air Force Technical Report, WRDC-TR-90-4023 (1990).
H. E.Daniels, Proc. R. Soc. Lond. 183 (1945) 405.
S. L.Phoenix, in “Proceedings of 9th US National Congress of Applied Mechanics”, Book H0028 edited by Y. H. Pao (ASME, New York, 1982) p. 219.
S. L.Phoenix, P.Schwartz and H. H.Robinson IV, Compos. Sci. Technol. 32 (1988) 81.
P.Schwartz, M.Rosenshaft and H. D.Wagner, J. Mater. Sci. Lett. 4 (1985) 1409.
C. S.Wang, J.Burkett, S.Bhattacharya, H. H.Chuah and F. E. Arnold, Proc. ACS Div. Polym. Mater. Sci. Eng. 60 (1989) 767.
H. H.Chuah, T. T.Tsai, K. H.Wei, C. S.Wang and F. E.Arnold, 60 (1989) 517.
Y.Wu and G. C.Tesoro, J. Appl. Polym. Sci. 31 (1986) 1041.
W.Sweeny, J. Polym. Sci. Polym. Chem. Ed. 30 (1992) 1111.
F. J.McGarry and J. E.Moalli, Polymer 32 (1991) 1816.
J. R.Brown, P. J. C.Chappel and Z. J.Mathys, J. Mater. Sci. 26 (1991) 4172.
R.Benrashid and G. C.Tesoro, Text. Res. J. 60 (1990) 334.
F. P. M.Mercx and P. J.Lemstra, Polym. Commun. 31 (1990) 252.
R. E.Allred, E. W.Merril and D. K.Roylance, in “Molecular Characterization of Composite Interfaces”, edited by H. Ishida and G. Kumar (Plenum Press, New York, 1984) p. 333.
Z-F.Li and A. N.Netravali, J. Appl. Polym. Sci. 44 (1992) 319.
44 (1992) 333.
V. Ravichandran, PhD Thesis, Cornell University (1991).
M. G. Dobb, in “Strong Fibers”, Handbook of Composites, Vol. 1, edited by W. Watt and B. V. Perov (Elsevier Science North-Holland, 1985) p. 673.
R. Farris, Y. Cohen and S. J. de Teresa, US Pat. 4842924 (1989).
J. V.Crivello, J. Polym. Sci. Polym. Chem. Ed. 11 (1973) 1185.
A.Mathur and A. N.Netravali, Adv. Compos. Lett. 3 (1994) 13.
P.Schwartz, H. D.Wagner and S. L.Phoenix, J. Compos. Mater. 18 (1984) 312.
A. N.Netravali, P.Schwartz, S. L.Phoenix, Polym. Compos. 10 (1989) 385.
S. R.Allen, J. Mat. Sci. 22 (1988) 853.
Y.Cohen and E. L.Thomas, Polym. Eng. Sci. 25 (1985) 1093.
R. J.Morgan and N. L.Butler, Polym. Bull. 27 (1992) 689.
R. J. Morgan, C. O. Pruneda, N. L. Butler, F. M. kong, L. Caley and R. L. Moore, in “Proceedings of the 29th National SAMPE Symposium” (1984) p. 891.
A. N.Netravali and W.Sachse, Polym. Compos. 12 (1991) 370.
K.Kupper and P.Schwartz, J. Adh. Sci. Tech. 5 (1991) 165.
U.Gaur and B.Miller, Compos. Sci. Technol. 34 (1989) 35.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mathur, A., Netravali, A.N. Modification of mechanical properties of Kevlar fibre by polymer infiltration. JOURNAL OF MATERIALS SCIENCE 31, 1265–1274 (1996). https://doi.org/10.1007/BF00353106
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00353106