Abstract
The design and use of a marine heat probe with capability for measuring thermal conductivity insitu with high accuracy, and providing digital acoustic transmission of data to the ship, is described. The instrument employs the ‘violin bow’ strength member and parallel sensor string configuration suggested by C. R. B. Lister. Several hundred measurements have been made in the deep ocean on multipenetration or ‘pogostick’ profiles using a 3 m probe and in deep inlets of western Canada using a 7 m probe. The insitu thermal conductivity technique using a calibrated heat pulse has been studied in detail through laboratory calibration of the probe in materials of known conductivity, through numerical models, and through comparison of insitu measurements with needle probe measurements on sediment cores taken from the same sites. The insitu technique permits a conductivity accuracy of better than ±5% with a recording time of 7 minutes following 7 minutes in the bottom to establish the geothermal gradient. The pulse heating is also more energy efficient than the conventional continuous heating technique.
Similar content being viewed by others
References
Beck, A. E.: 1965, ‘Techniques of Measuring Heat Flow on Land’. In W. H. K. Lee (Ed.), Terrestrial Heat Flow, Geophysical Monograph 8, American Geophysical Union, 24–57.
Bennett, A. S.: 1972, ‘The Calibration of Thermistors Over the Temperature Range 0–30°C’, Deep-Sea Research 19, 157–163.
Blackwell, J. H.: 1954, ‘A transient flow method for determination of thermal constants of insulating materials in bulk’, J. Appl. Phys. 25, 137–144.
Bullard, E. C.: 1954, ‘The Flow of Heat Through the Floor of the Atlantic Ocean’, Proc. Roy. Soc. London A 222, 408–429.
Bullard, E. C., and Day, A.: 1961, ‘The Flow of Heat Through the Floor of the Atlantic Ocean’, Geophys. J. 4, 284–292.
Carslaw, H. S., and Jaeger, J. C.: 1959, Conduction of Heat in Solids, 2nd edn., Oxford University Press, London, 510 pp.
Clarke, T. F., Malcolm, F. J., and Korgen, B. J.: 1972, ‘An Improved Ewing Heat Probe Frame’, Marine Geophys. Res. 1, 451–455.
Davis, E. E., Lister, C. R. B., Wade, U. S., and Hyndman, R. D.: 1979, ‘Detailed Heat Flow Measurements Over the Juan de Fuca Ridge System and Implications for the Evolution of Hydrothermal Circulation in Young Oceanic Crust’, J. Geophys. Res., in press.
Gerard, R., Langseth, M. G.Jr., and Ewing, M.: 1962, ‘Thermal Gradient Measurements in the Water and Bottom Sediments of the Western Atlantic’, J. Geophys. Res. 67, 785–803.
Huppert, H. E., and Sclater, J. G.: 1968, ‘On the In-situ measurement of the thermal conductivity of deep-sea sediments’, Scripps Inst. Oceanog. Tech. Rept. MPL-U-20/68, La Jolla, Calif.
Hyndman, R. D., Rogers, G. C., Bone, M. N., Lister, C. R. B., Wade, U. S., Barrett, D. L., Davis, E. E., Lewis, T., Lynch, S., and Seeman, D.: 1978, ‘Geophysical Measurements in the Region of the Explorer Ridge off Western Canada’, Can. J. Earth Sci. 15, 1508–1525.
Jaeger, J. C.: 1956, ‘Conduction of Heat in an Infinite Region Bounded Internally by a Circular Cylinder of a Perfect Conductor’, Australian J. Physics 9, 167–179.
Jaeger, J. C.: 1959, ‘The Use of Complete Temperature-Time Curves for Determination of Thermal Conductivity with Particular Reference to Rocks’, Australian J. Physics 12, 203–217.
Jaeger, J. C.: 1965, ‘Application of the Theory of Heat Conduction to Geothermal Measurements’. In W. H. K. Lee (Ed.), Terrestrial Heat Flow, Geophysical Monograph Series 8, American Geophysical Union, 7–23.
Korgen, B. J.: 1971, ‘Extending the Versatility of the Bullard Heat Probe’, Marine Geophys. Res. 1, 354–357.
Lachenbruch, A. H., and Marshall, B. V.: 1966, ‘Heat Flow Through the Arctic Ocean Floor: The Canada Basin-Alpha Rise Boundary’, J. Geophys. Res. 71, 1223–1248.
Langseth, M. G., Jr.: 1965, ‘Techniques for Measuring Heat Flow Through the Ocean Floor’. In W. H. K. Lee (Ed.), Terrestrial Heat Flow, Geophysical Monograph Series 8, American Geophysical Union, 58–77.
Langseth, M. G.Jr., and Von Herzen, R. P.: 1970, ‘Heat Flow through the World Oceans’. In A. E. Maxwell (Ed.), The Sea Vol. 4 Pt. 1, Interscience, New York, 299–352.
Lister, C. R. B.: 1963, ‘Geothermal Gradient Measurement Using a Deep Sea Corer’, Geophys. J. 7, 571–583.
Lister, C. R. B.: 1970, ‘Measurement of In Situ Conductivity by Means of a Bullard-Type Probe’, Geophys. J. 19, 521–533.
Lister, C. R. B.: 1979, ‘The Pulse-Probe Method of Conductivity Measurement’, Geophys. J. 57, 451–461.
Powell, P. W.: 1958, ‘Thermal conductivity and expansion coefficients of water and ice’, Advances in Physics 7, 276–297.
Ratcliffe, E. H.: 1959, ‘Thermal Conductivities of Fused and Crystalline Quartz’, British J. Appl. Physics 10, 22–25.
Ratcliffe, E. H.: 1960, ‘The Thermal Conductivities of Ocean Sediments’, J. Geophys. Res. 65, 1535–1541.
Sclater, J. G., Correy, C. E., and Vacquier, V.: 1969, ‘In Situ Measurement of the Thermal Conductivity of Ocean-Floor Sediments’, J. Geophys. Res. 74, 1070–1081.
Smith, G. D.: 1965, Numerical Solution of Partial Differential Equations, Oxford University Press, London.
Von Herzen, R. P., and Maxwell, A. E.: 1959, ‘The Measurement of Thermal Conductivity of Deep-Sea Sediments by a Needle Probe Method’, J. Geophys. Res. 64, 1557–1563.
Von Herzen, R. P., and Anderson, R. N.: 1972, ‘Implications of Heat Flow and Bottom Water Temperature in the Eastern Equatorial Pacific’, Geophys. J. 26, 427–458.
Author information
Authors and Affiliations
Additional information
Contribution from the Earth Physics Branch No. 807.
Rights and permissions
About this article
Cite this article
Hyndman, R.D., Davis, E.E. & Wright, J.A. The measurement of marine geothermal heat flow by a multipenetration probe with digital acoustic telemetry and insitu thermal conductivity. Marine Geophysical Researches 4, 181–205 (1979). https://doi.org/10.1007/BF00286404
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00286404