References
S.Das, S. V.Prasad and T. R.Ramachandran, Wear 133 (1989) 173.
Idem., Mater. Sci. Engng. 138A (1991) 123.
S.Das and B. K.Prasad. Wear 162–164 (1993) 64.
B. K.Prasad and S.Das, Mater. Sci. Engng. 144A (1991) 229.
L.Brune and P.Iguera, Automotive Engng. 3 (1978) 29.
B. P.Krishnan, N.Raman. K.Narayanaswami and P. K.Rohatgi, Met. Technol. Wear 20 (1980) 35.
J. E.Hatch, in “Aluminium: properties and physical metallurgy”, 1st Edn edited by J. E. Hatch (ASM, Metals Park, Ohio, 1984).
O. P.Modi, PhD thesis, Met. Engng. Dept., IIT, Kanpur, India, 1994.
B. K.Prasad, T. K.Dan and P. K.Rohatgi, Mater. Trans. JIM 34 (1993) 474.
B. K.Prasad, T. K.Dan and P. K.Rohatgi, Z. Metallkde 83 (1992) 781.
M. R.Madhav, S.Raman, P. K.Rohatgi and M. K.Surappa, Scripta Metall. 15 (1981) 1191.
T. Kulik, T. H. Kosel and Y. Xu, in “Proceedings of International Conference on Wear in Materials”, Denver, USA, 9–13 April, 1989, Vol. I, edited by K. C. Ludema (ASME) p. 23.
A. G.Evans and T. R.Wilson, Acta Metall. 24 (1976) 939.
B. K.Prasad, PhD thesis, Met. Eng. Dept., University of Roorkee, India, 1994.
K. J.Bhansali and R.Mehrabian, J. Met. 34 (1982) 30.
I. F.Richardson, The Foundryman 82 (1989) 538.
A. G.Wang and I. M.Hutchings, Mater. Sci. Technol. 5 (1989) 71.
B. K. Prasad, S. V.Prasad and A. A.Das, J. Mater. Sci. 27 (1992) 4489.
S. V.Prasad, P. K.Rohatgi and T. H.Kosel, Mater. Sci. Engng. 80 (1986) 213.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Prasad, B.K., Venkateswarlu, K., Modi, O.P. et al. Influence of the size and morphology of silicon particles on the physical, mechanical and tribological properties of some aluminium — silicon alloys. J Mater Sci Lett 15, 1773–1776 (1996). https://doi.org/10.1007/BF00275338
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00275338