References
A. H.Hever and L. W.Hobbs, “Advances in ceramics”, Vol. 3 (American Ceramic Society, Columbus OH, 1981).
M.Atik and M. A.Aegerter, J. Non-Cryst. Solids 147&148 (1992) 818.
K.Sugioka, H.Tashiro, K.Toyoda, H.Murakami and H.Takai, J. Mater. Res. 5 (1990) 2835.
P.Lima veto, M.Atik, L.Avaca and M. A.Aegerter, J. Sol-Gel Technol. 1 (1994) 177.
K.Izumi, M.Murakami, T.Deguchi and A.Morita, J. Amer. Ceram. Soc. 72 (1989) 1465.
M.Atik, C.R'kha and J.Zarzycki, J. Mater. Sci. Lett. 13 (1994) 266.
A. G.Evans and E. A.Charles, J. Amer. Ceram. Soc. 59 (1976) 371.
B. R.Lawn, A. G.Evans and D. B.Marshall, J. Amer. Ceram. Soc. 63 (1980) 574.
P.Mirazono and J. S.Moya, Ceram. Int. 10 (1984) 147.
D. T.Quinto, G. J.Wolfe and P. C.Jindal, Thin Solid Films 153 (1987) 19.
K.Wasa, T.Nagai and S.Hayakawa, Thin Solid Films 30 (1975) 235.
I. J.Mccolm, “Ceramic hardness” (Plenum, New York, 1990).
B.Jönnson and S.Hogmark, Thin Solid Films 144 (1984) 257.
Y. H.Chris cha, G.Kim, H. J.Doerr and R. F.Bunshah, Thin Solid Films 253 (1994) 212.
A. L.Yurkov, N. V.Jhuravleva and E. S.Lukin, J Mater. Sci. 29 (1994) 6551.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Atik, M., Messaddeq, S.H., Aegerter, M.A. et al. Mechanical properties of zirconia-coated 316L austenitic stainless steel. J Mater Sci Lett 15, 1868–1871 (1996). https://doi.org/10.1007/BF00264081
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00264081