Abstract
Two integral equation formulations for the determination of the vertical displacement and the bending moment around holes in an elastic plate are presented. Each formulation consists of two equations, the first one an integral equation and an integro-differential equation and the second one two singular integral equations. The equations are solved using B-splines as approximations to the unknowns and the method is applied to the case of one elliptic hole in a twisted plate.
Zusammenfassung
Zwei verschiedene Integralgleichungssysteme für die Bestimmung von die Durchbiegung und die Biegemoment in einer gelochten elastischen Platte werden entwickelt. Die eine Systeme besteht von einer Integralgleichung und einer Integro-Differentialgleichung und die andere von zwei singulären Integralgleichungen von Cauchy'schen Typus. Bei der Auflösung der Systeme werden die unbekannten mit Hilfe “B-splines” ausgedrückt. Beide Systeme werden benutzt in dem Fall von einer elliptischen Loch in einer uendlichen, tordierten Platte.
Similar content being viewed by others
References
Savin, G. N.,Stress concentrations around holes, Pergamon Press, London 1961
Hansen, E. B., To be published
Rieder, G., Mechanische Deutung und Klassifizierung einiger Integralverfahren der ebenen Elasticitätstheorie I–II,Bull. Acad. Polon Sci. Sér. Sci. Techn. 16 (1968) 101–114
Lott, H. and Rieder, G., Über das Spektrum sigulärer Integraloperatoren in der Elasticitätstheorie,Wissenschaftlische Zeitschrift der technischen Hochschule Karl-Marx-Stadt, 11 (1969) 329–333
Rieder, G., Über Eingrenzungsverfahren und Integralgleichungsmethoden für elastische Scheiben, Platten und verwandte Probleme,Wissenschaftlische Zeitschrift der Hochschule für Architektur und Bauwesen Weimar, 19 (1972) 217–222
Glahn, H., Die Berechnung krummlinig berandeter Platten mit Hilfe singulärer Integralgleichungen. To be published
Jasvon, M. A. and Maiti, M., An integral equation formulation of plate bending problems.J. Engineering Mathematics 2 (1968) 83–93
Antes, H., Splinefunktionen bei der Lösung von Integralgleichungen.Numerische Mathematik 19 (1972) 116–126
Greville, T. N. W. (editor),Theory and applications of spline functions. Academic Press, New York 1969.
Goodier, J. N., The influence of circular and elliptic holes on the transverse flexure of elastic plates.Phil. Mag. 22 (1936) 69–80.
Author information
Authors and Affiliations
Additional information
An abbreviated version of this paper was included in a paper “Integral equation solutions to mechanical problems. A review and an application to plate theory” which will appear in the “Proceedings from second national congress of theoretical and applied mechanics, Druzba, Bulgaria, 1973”.
Rights and permissions
About this article
Cite this article
Hansen, E.B. Numerical solution of integro-differential and singular integral equations for plate bending problems. J Elasticity 6, 39–56 (1976). https://doi.org/10.1007/BF00135175
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00135175