Skip to main content
Log in

Characterization of two biodegradable polymers of potential application within the biomaterials field

  • Published:
Journal of Materials Science: Materials in Medicine Aims and scope Submit manuscript

An extensive characterization of two biodegradable polymers that may constitute an alternative, if one is aiming at orthopaedic applications, to the currently used poly(glicolic acid), poly(lactic acid) or polyhydroxybutyrate was carried out. A cellulose acetate and three different grades of a novel starch based polymer were studied. The characterization included: tensile and instrumented impact tests, rheological measurements, scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transformed infra-red spectroscopy (FTIR), differential scanning calorimetry (DSC), and long-term degradation trials in Hank's solution. The results show that both polymers, specially the starch based one, present a great potential for biomedical applications, on which adequate mechanical properties associated to a controlled degradation rate are required.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. J. C. KNOWLES and G. W. HASTINGS, J. Mater. Sci.: Mater. in Medicine 3 (1992) 352.

    Google Scholar 

  2. R. S. LANGER and N. A. PEPPAS, Biomaterials 2 (1981) 201.

    Google Scholar 

  3. I. CAPPERAULD, Clin. Mater. 4 (1989) 3.

    Google Scholar 

  4. T. HAYASHI, Prog. Polym. Sci. 19 (1994) 663.

    Google Scholar 

  5. P. TORMALA, Clin. Mater. 13 (1993) 35.

    Google Scholar 

  6. K. P. ANDRIANO, T. POHJONEN and P. TORMALA, J. Apl. Biomater. 5 (1994) 133.

    Google Scholar 

  7. J. C. KNOWLES and G. W. HASTINGS, J. Mater. Sci.: Mater. in Medicine 4 (1993) 102.

    Google Scholar 

  8. P. U. ROKKANEN, Ann. Med. 23 (1991) 109.

    Google Scholar 

  9. A. U. DANNIELS, K. P. ANDRIANO, W. P. SMUTZ, M. K. O. CHANG and J. HELLER, J. Apl. Biomater. 5 (1994) 51.

    Google Scholar 

  10. T. TERJESEN and K. APALEST, J. Orthop. Res. 6 (1988) 293.

    Google Scholar 

  11. J. POUTIS, C. BAQUEY and D. CHAUVEAUX, Clin. Mater. 16 (1994) 119.

    Google Scholar 

  12. C. BASTIOLI, V. BELLOTTI, L.Del GIUDICE and G. GILLI, J. Environm. Polym. Degr. 1 (1993) 181.

    Google Scholar 

  13. Y. H. LEE and L. T. FAN, Biotechnol. Bioeng. 24 (1982) 2383.

    Google Scholar 

  14. J. J. CAEL and J. L. KOENING, Biopolymers 14 (1975) 1885.

    Google Scholar 

  15. P. S. ALLAN and M. J. BEVIS, Composites Manufacturing 2 (1990) 79.

    Google Scholar 

  16. R. L. Reis, A. M. Cunha, P. S. Allan and M. J. Bevis, J. Polym. for Advanc. Techn. (submitted).

  17. C. C. P. M. VERHEYEN, J. R. WIJN, C. A.Van BLITTERSWIJK and K.De GROOT, J. Biomed. Mater. Res. 26 (1992) 1277.

    Google Scholar 

  18. A. M. CUNHA, R. L. REIS, F. FERREIRA and P. L. GRANJA, in “Advances in Materials Science and Orthopaedic Surgery, NATO/ASI Series E: Applied Sciences”, edited by R. Kossowsky, N. Kossowsky, Kluwer Press, Amsterdam, 1995 163.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Reis, R.L., Cunha, A.M. Characterization of two biodegradable polymers of potential application within the biomaterials field. J Mater Sci: Mater Med 6, 786–792 (1995). https://doi.org/10.1007/BF00134318

Download citation

  • Received:

  • Accepted:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF00134318

Keywords

Navigation