Abstract
This chapter gives the state of the art of previous studies on hygric and thermal properties of bio-aggregate based building materials. Firstly, hygric characteristics such as sorption isotherms, water vapor permeability and moisture diffusivity are given. The ability of bio-aggregate based building materials to moderate ambient relative humidity may be valued using moisture buffer value. Then thermal properties (thermal conductivity, thermal diffusivity conductivity and specific heat capacity) are reported. Finally, concluding remarks on hygrothermal behavior with simultaneous heat and mass transfer are provided, they underline that considering only thermal conductivity and specific heat capacity is not sufficient to evaluate the energy performance of bio-aggregate based building materials. The results found in bibliography mainly concern wood-based and hemp-based materials.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Agoua, E., Allognon-Houessou, E., Adjovic, E., Togbedji, B.: Thermal conductivity of composites made of wastes of wood and expanded polystyrene. Constr. Build. Mater. 41, 557–562 (2013)
Aigbomian, E.P., Fan, M.: Development of wood-crete building materials from sawdust and waste paper. Constr. Build. Mater. 40, 4361–4366 (2013)
Al Rim, K., Ledhem, A., Douzane, O., Dheilly, R.M., Queneudec, M.: Influence of the proportion of wood on the thermal and mechanical performances of clay-cement-wood composites. Cem. Concr. Compos. 21, 269–276 (1999)
Amziane, S., Arnaud L. (eds.): Bio-aggregate-based Building Materials. Applications to Hemp Concrete. ISTE Ltd and Wiley, Inc (2013)
Anderson, R.B.: Modifications of the Brunauer, Emmett and Teller. J. Am. Chem. Soc. 68(4), 686–691 (1946)
Anderson, R.B., Hall, W.K.: Modifications of the Brunauer Emmett and Teller, equation II. J. Am. Chem. Soc. 70(5), 1727–1734 (1948)
Arnaud, L.: Mechanical and thermal properties of hemp mortars and wools: experimental and theoretical approaches. In: 3rd International Symposium Of Bioresource Hemp (2000)
Bederina, M., Marmoret, L., Mezreb, K., Khenfer, M.M., Bali, A., Quéneudec, M.: Effect of the addition of wood shavings on thermal conductivity of sand concretes: experimental study and modelling. Constr. Build. Mater. 21, 662–668 (2007)
Benfratello, S., Capitano, C., Peri, G., Rizzo, G., Scaccianoce, G., Sorrentino, G.: Thermal and structural properties of a hemp-lime biocomposite. Constr. Build. Mater. 48, 745–754 (2013)
Bouguerra, A.: Prediction of effective thermal conductivity of moist wood concrete. J. Phys. D: Appl. Phys. 32(12), 1407–1414 (1999)
Bouguerra, A., Sallée, H., de Barquin, F., Dheilly, R.M., Quéneudec, M.: Isothermal moisture properties of wood-cementitious composites. Cem. Concr. Res. 29, 339–347 (1999)
Carré, P., Le Gall, R.: Définition et détermination des conductivités thermiques dans les structures multicouches C.V.R. – balsa. Rev. Gén. Therm. 340, 211–215 (1990)
Cerezo, V.: Propriétés mécanique, thermique et acoustique d’un matériau à base de particules végétales: approche expérimentale et modélisation théorique. Ph.D. thesis, ENTPE, INSA de Lyon (juin 2005)
Chamoin, J.: Optimisation des propriétés (physiques, hydriques et mécaniques) de bétons de chanvre par la maîtrise de la formulation. Ph.D. thesis, INSA de Rennes (juillet 2013)
Collet, F.: Caractérisation hydrique et thermique de matériaux de génie civil à faibles impacts environnementaux. Ph.D. thesis, INSA de Rennes (décembre 2004)
Collet, F., Pretot, S.: Experimental investigation of moisture buffering capacity of sprayed hemp concrete. Constr. Build. Mater. 36, 58–65 (2012)
Collet, F., Pretot, S.: Variation de la capacité hydrique tampon de bétons de chanvre en fonction de la formulation, Ecobat Sciences et techniques 1ère édition, 7 et 8, communication orale, Paris (mars 2012)
Collet, F., Pretot, S.: Effect of coating on moisture buffering of hemp concrete. In: 2nd International Conference on Building Energy and Environment, Boulder, Colorado, 1–4 August 2012
Collet, F., Pretot, S.: Thermal conductivity of hemp concretes: variation with formulation, density and water content. Constr. Build. Mater. 65, 612–619. doi:10.1016/j.conbuildmat.2014.05.039 (2014)
Collet, F., Bart, M., Serres, L., Miriel, J.: Porous structure and water vapour sorption of hemp-based materials. Constr. Build. Mater. 22, 1271–1280 (2008)
Collet, F., Chamoin, J., Prétot, S., Lanos, C.: Comparison of the hygric behaviour of three hemp concretes. Energy Build. 62, 294–303 (2013)
De Boer, J.H.: The Dynamical Character of Adsorption. Clarendon Press, Oxford (1953)
de Bruijn, P., Jeppssona, K.H., Sandin, K., Nilssona, C.: Mechanical properties of lime–hemp concrete containing shives and fibres. Biosyst. Eng. 103(4), 474–479 (2009)
de Bruijn, P., Johansson, P.: Moisture fixation and thermal properties of lime-hemp concrete. Constr. Build. Mater. 47, 1235–1242 (2013)
de Vries, D.A.: Simultaneous transfer of heat and moisture in porous media. Eos, Trans. Am. Geophys. Union 39, 909–916 (1958)
Dinh, T.M., Magniont, C., Coutand, M., Escadeillas, G.: Hemp concrete using innovative pozzolanic binder. In: ICBBM 2015, Clermont Ferrand, France, 22–24 June 2015
Dubois, S., Lebeau, F.: Hygrothermal behavior of different lime-hemp concrete mixes. In: First International Conference on Concrete Sustainability (ICCS13), Tokyo, Japan (2013)
Dubois, S., Evrard, A., Lebeau, F.: Hygrothermal modelling of lime-hemp concrete used as building material and indoor climate buffering characterization. In: International Conference of Agricultural Engineering, Valence, Espagne, 8–12 July 2012
Dubois S., Evrard A., Lebeau F.: Modeling the hygrothermal behavior of biobased construction materials. J. Build. Phys. (2013)
Elfordy, S., Lucas, F., Tancret, F., Scudeller, Y., Goudet, L.: Mechanical and thermal 415 properties of lime and hemp concrete (‘‘hempcrete’’) manufactured by a projection process. Constr. Build. Mater. 22(10), 2116–2123 (2008)
Evrard, A.: Sorption behaviour of Lime-hemp concrete and its relation to indoor comfort and energy demand. In: 23rd Conference on Passive and Low Energy Architecture, Geneva, Switzerland, 6–8 September 2006
Evrard, A.: Transient hygrothermal behavior of Lime–Hemp materials, Ph.D. thesis, Université catholique de Louvain (2008)
Evrard, A., De Herde, A.: Hygrothermal performance of lime-hemp wall assemblies. J. Build. Phys. 34, 15–25 (2010)
Gawin D., Kosny J., and Wilkes K.: Thermal conductivity of moist cellular concrete—experimental and numerical study. ASHRAE Build. IX, 1–10 (2004)
Gourlay, E., Arnaud, L.: Comportement hygrother-mique des murs de béton de Chanvre. Actes du congrès SFT, Le Touquet, France (2010)
Guggenheim, E.A.: Application of Statistical Mechanics. Clarendon Press, Oxford (1966). (Chapter 11)
International Union of Pure and Applied Chemistry: Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity. Pure Appl. Chem. 57(4), 603–619 (1986)
Janssen, H., Roels, S.: The dependable characterisation of the moisture buffer potential of interior claddings, Proceedings of the Nordic Symposium on Building Physics, Copenhagen, Denmark, June 2008, pp. 16–18 (2008)
Kumaran, K., Lackey, J., Normandin, N., van Reenen, D., Tariku, F.: Summary Report from Task 3 of MEWS Project at the Institute for Research in Construction—Hygrothermal Properties of Several Building Materials, IRC-RR-110 (2002)
Latif, E., Lawrence, M., Shea, A., Walker, P.: Moisture buffer potential of wall assemblies incorporating hemp-lime. In: ICBBM 2015, Clermont Ferrand, France. 22–24 June 2015
Lawrence, M., Shea, A., Walker, P., De Wilde, P.: Hygrothermal performance of bio-based insulation materials. Proc. Inst. Civil Eng. Constr. Mater. 166(4), 257–263. ISSN: 1747-650X (2013)
Ledhem, A., Dheilly, R.M., Benmalek, M.L., Queneudec, M.: Properties of wood-based composites formulated with aggregate industry waste. Constr. Build. Mater. 14, 341–350 (2000)
Maaloufa, C., Tran Le, A.D., Umurigirwaa, S.B., Lachia, M., Douzane, O.: Study of hygrothermal behaviour of a hemp concrete building envelope under summer conditions in France. Energy Build. 77, 48–57 (2014)
Magniont, C., Escadeillas, G., Coutand, M., Oms-Multon, C.: Use of plant aggregates in building ecomaterials. Eur. J. Environ. Civil Eng. 16(Supplement 1), s17–s33 (2012)
Naono, H., Hakuman, N.: Analysis of porous texture by means of water vapour adsorption isotherm with particular attention to the lower limit of hysteresis loop. J. Colloid. Interf. Sci. 158, 19–26 (1993)
Nguyen, T.T.: Contribution à l’étude de la formulation et du procédé de fabrication d’éléments de construction en béton de chanvre. Ph.D. thesis, Université de Bretagne Sud (janvier 2010)
Nielsen, A.F.: Free Water Intake of Cellular Concrete and Bricks Measured by Gamma Ray Attenuation. Thermal Insulation Laboratory, Technical University of Denmark, Report no. 41 (January 1976)
Oumeziane, Y.A., Bart, M., Moissette, S., Lanos, C.: Hysteretic behaviour and moisture buffering of hemp concrete. Transp. Porous Med. (2014). doi:10.1007/s11242-014-0314-7
Perré, P., Pierre, F., Casalinho, J., Ayouz, M.: Determination of the mass diffusion coefficient based on the relative humidity measured at the back face of the sample during unsteady regimes. Drying Technol. Int. J. doi:10.1080/07373937.2014.982253 (2015)
Peuhkuri, R.: Moisture dynamics in building envelopes. Doctoral thesis, Department of Civil Engineering, Technical University of Benmark, Denmark (2003)
Pierre, T., Colinart, T., Glouannec, P.: Measurement of thermal properties of biosourced building materials. Int. J. Thermophys. doi:10.1007/s10765-013-1477-0 (2013)
Pretot, S., Collet, F., Glouannec, P., Lang, V.: Variation des propriétés thermiques de bétons de chanvre en fonction de la formulation, Congrès français de thermique-Efficacité énergétique, Vannes 2009, Tome 2, pp. 865–870, Editions Société Française de Thermique, ISBN: 2-905267-67-2
Pretot, S., Collet, F.: Experimental study of hygrothermal behavior of a hemp concrete wall (without and with coating). In: 2nd International Conference on Building Energy and Environment, communication orale, Boulder, Colorado, 1er au 4 août 2012
Réglementation Thermique.: Règles Th-U—Fascicule 2 (2005)
Rode, C.: Moisture Buffering of Building Materials, Report BYG•DTU R-126, ISSN 1601-2917, ISBN 87-7877-195 (2005)
Sassoni, E., Manzi, S., Motori, A., Montecchi, M., Canti, M.: Novel sustainable hemp-based composites for application in building industry: physical, thermal and mechanical characterization. Energy Build. 77, 219–226 (2014)
Stefanidou, M., Assael, M., Antoniadis, K., Matziaroglou, G.: Thermal conductivity of building materials employed in the preservation of traditional structures. Int. J. Thermophys. 31, 844–851 (2010)
Stevulovaa, N., Kidalovaa, L., Cigasovaa, J., Junaka, J., Sicakovaa, A., Terpakovaa, E.: Lightweight composites containing hemp hurds. Proced. Eng. 65, 69–74 (2013)
Suleiman, B.M., Larfeldt, J., Leckner, B., Gustavsson, M.: Thermal conductivity and diffusivity of wood. Wood Sci. Technol. 33, 465–473 (1999)
Taoukil, D., El bouardi, A., Sick, F., Mimet, A., Ezbakhe, H., Ajzoul, T.: Moisture content influence on the thermal conductivity and diffusivity of wood–concrete composite. Constr. Build. Mater. 48, 104–115 (2013)
Tran Le, A.D.: Etude des transferts hygrothermiques dans le béton de chanvre et leur application au bâtiment. Ph.D. thesis, Université de Reims Champagne- Ardenne; November (2010) [in French]
Tran Le, A.D., Maalouf, C., Mai, T.H., Wurtz, E., Collet, F.: Transient hygrothermal behavior of a hemp concrete building envelope. Energy Build. 42, 1797–1806 (2010)
Walker, R., Pavía, S.: Moisture transfer and thermal properties of hemp–lime concretes. Constr. Build. Mater. 64, 270–276 (2014)
Zaknoune, A.: Etude du comportement thermohydrique de matériaux « chanvre-chaux » lors de la phase de séchage – estimation par technique inverse des propriétés hydriques. Ph.D. thesis, Université de Bretagne Sud (December 2011) [in French]
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 RILEM
About this chapter
Cite this chapter
Collet, F. (2017). Hygric and Thermal Properties of Bio-aggregate Based Building Materials. In: Amziane, S., Collet, F. (eds) Bio-aggregates Based Building Materials . RILEM State-of-the-Art Reports, vol 23. Springer, Dordrecht. https://doi.org/10.1007/978-94-024-1031-0_6
Download citation
DOI: https://doi.org/10.1007/978-94-024-1031-0_6
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-024-1030-3
Online ISBN: 978-94-024-1031-0
eBook Packages: EngineeringEngineering (R0)