Abstract
The need for optimum machining parameters has always been of paramount importance for metal cutting. The economics of the process largely depends on selecting the best machining parameters. However, the additional challenge of being environmentally friendly in production while still being cost effective is now imperative. Machining conditions are not always conducive in reducing the carbon footprint when cutting material with a low machinability rating. This is particularly pertinent when aerospace material such as Boron Carbide Particle Reinforced Aluminium Alloy (AMC220bc) is machined. This material falls under the category of a particulate reinforced Metal Matrix Composite (MMC), where the ceramic fibers disrupt the flow of electrons. The result is a decrease in thermal conductivity causing the tool interface temperature to increase, reducing tool life. This research will determine the optimum economic and sustainable machining parameters for this material.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
S. Kalpakjian, S.R. Schmid, Manufacturing engineering and technology (Prentice Hall, Singapore, 2010)
T.J. Drozda, C. Wick, J.T. Benedict, R.F. Veilleux, R. Bakerjian, P.J. Mitchell, Tool and manufacturing engineers handbook : a reference book for manufacturing engineers, managers, and technicians, 4th edn. (SME Publications, Michigan, 1983)
T. Gutowski, C. Murphy, D. Allen, D. Bauer, B. Bras, T. Piwonka, P. Sheng, J. Sutherland, D. Thurston, E. Wolff, Environmentally benign manufacturing: Observations from Japan, Europe and United States. J. Cleaner Prod 13(1), 1–17 (2005)
A.N.I. 14040, Environmental Management—Life Cycle Assessment—Principles and Framework (Standards Australia and Standards New Zealand, The Crescent, Homebush, 1998)
P.S. Sreejith, B.K.A. Ngoi, Dry machining: Machining of the future. J. Mater Process. Technol. 101(1), 287–291 (2000)
R. Roy, A Primer on the Taguchi Method, (Society of Manufacturing Engineers, USA 1990)
S. Tanaydin, Robust design and analysis for quality engineering. Technometrics 40(4), 348 (1998)
N.H. Rafai, M.N. Islam, An investigation into dimensional accuracy and surface finish achievable in dry turning. Mach. Sci. Technol. 13(4), 571–589 (2009)
D. Haughey, Pareto Analysis Step by Step [Online]. Available: http://www.projectsmart.co.uk/pareto-analysis-step-by-step.html (2010)
B. Boswell, M.N. Islam, A. Pramanik, Sustainable machining of aerospace material. In: Proceedings of the World Congress on Engineering 2013 (WCE 2013), Lecture Notes in Engineering and Computer Science. 3–5 July, 2013, (pp. 1869–1876). London (2013)
R. Azouzi, M. Guillot, On-line prediction of surface finish and dimensional deviation in turning using neural network based sensor fusion. Int. J. Mach. Tools Manuf. 37(9), 1201–1217 (1997)
U.A. Dabade, H.A. Sonawane, S.S. Joshi, Cutting forces and surface roughness in machining Al/SiCp composites of varying composition. Mach. Sci. Technol. 14(2), 258–279 (2010)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer Science+Business Media Dordrecht
About this paper
Cite this paper
Boswell, B., Islam, M.N., Pramanik, A. (2014). Optimum Parameters for Machining Metal Matrix Composite. In: Yang, GC., Ao, SI., Gelman, L. (eds) Transactions on Engineering Technologies. Springer, Dordrecht. https://doi.org/10.1007/978-94-017-8832-8_4
Download citation
DOI: https://doi.org/10.1007/978-94-017-8832-8_4
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-017-8831-1
Online ISBN: 978-94-017-8832-8
eBook Packages: EngineeringEngineering (R0)