Zusammenfassung
Sustaining the light-off temperatures of the catalytic converter can no longer be guaranteed at all times due to progressive hybridization of the powertrain. External electrical heating allows to obtain the light-off temperatures in a targeted manner and thus to minimize emissions, even under more difficult conditions. For helping to decide when this external energy supply is required, a real-time temperature model is needed. In the presented approach, the temperature is calculated by using different exponential growth functions for different loads. For these mathematical functions two parameters, the maximum temperature and the growth gradient, need to be identified. These parameters are determined empirically on a test bench. Results of different WLTC observations show a high conformity between the predicted temperature curves and the temperature actually measured.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Literatur
Skarke, P., Auerbach, C., Bargende, M., Berner, H.-J.: Multivariable air path and fuel path control for a Diesel engine with homogeneous combustion. In: 17. Internationales Stuttgarter Symposium, 143–155, Stuttgart (2017). https://doi.org/10.1007/978-3-658-16988-6_15
Langenheinecke, K.: Thermodynamik für Ingenieure, 10 ed. Springer Vieweg (2017). https://doi.org/10.1007/978-3-8348-9482-3
Chintala, V., Subramanian, K.A.: Experimental investigation on effect of enhanced premixed charge on combustion characteristics of a direct injection diesel engine. In: International Journal of Advances in Engineering Sciences and Applied Mathematics (2014) https://doi.org/10.1007/s12572-014-0109-7
Krämer, L., Bunar, F., Hansen, F. et al.: Mit der Diesel-Abgasnachbehandlung auf dem Weg zum SULEV-Standard. In: MTZ Motortech Z 75, 26–33 (2014). https://doi.org/10.1007/s35146-014-0010-8
Skarke P.: Simulationsgestützter Funktionsentwicklungsprozess zur Regelung der homogenisierten Dieselverbrennung. Dissertation, Universität Stuttgart (2017) https://doi.org/10.1007/978-3-658-17115-5
Bissett, E. J.: : Mathematical model of the thermal regeneration of a wall-flow monolith diesel particulate filter. In: Chem. Eng. Sc. (39), 1233–1244 (1984) https://doi.org/10.1016/0009-2509(84)85084-8
Ferziger, J., Peri\(\grave{\text{c}}\) M., Street, R.: Numerische Strömungsmechanik. Springer Vieweg, Berlin, Heidelberg (2008). https://doi.org/10.1007/978-3-662-46544-8
Allmendinger D.: Das Aufheizen eines Raumes. In: Heizstrategie - Die Simulation von Heizungsanlagen, Springer Fachmedien Wiesbaden (2017) https://doi.org/10.1007/978-3-658-11940-9_4
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 Springer Fachmedien Wiesbaden GmbH, ein Teil von Springer Nature
About this paper
Cite this paper
Schneider, A., Klingenstein, J., Berner, HJ., Bargende, M. (2022). Empirical Temperature Modelling of the Diesel Oxidation Catalyst. In: Bargende, M., Reuss, HC., Wagner, A. (eds) 22. Internationales Stuttgarter Symposium. Proceedings. Springer Vieweg, Wiesbaden. https://doi.org/10.1007/978-3-658-37011-4_22
Download citation
DOI: https://doi.org/10.1007/978-3-658-37011-4_22
Published:
Publisher Name: Springer Vieweg, Wiesbaden
Print ISBN: 978-3-658-37010-7
Online ISBN: 978-3-658-37011-4
eBook Packages: Computer Science and Engineering (German Language)