Abstract
In the present paper a general phenomenological model, based on the irreversible thermodynamics, is formulated and used to describe the multi-dissipative material. Two examples are presented: (1) Thermo-elastic-plastic-damage material accounting for coupling between heating rate and two dissipative phenomena: plasticity and damage; (2) 2M1C (2 mechanisms—1 yield criterion) model derived by Cailletaud and Sai [3] and identified by Velay et al. [13] to describe the elasto-viscoplastic behaviour of AISI L6 steel at different (but constant) temperatures, is extended to account for the effect of temperature change.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Abu Al-Rub, R.K., Voyiadjis, G.Z.: On the coupling of anisotropic damage and plasticity models for ductile materials. Int. J. Solids Struct. 40, 2611–2643 (2003)
Bednarek, Z., Kamocka, R.: The heating rate impact on parameters characteristic of steel behaviour under fire conditions. J. Civ. Eng. Manage. 12(4), 269–275 (2006)
Cailletaud, G., Sai, K.: Study of plastic/viscoplastic models with various inelastic mechanisms. Int. J. Plast 11, 991–1005 (1995)
Chaboche, J.L.: Thermodynamic formulation of constitutive equations and application to the viscoplasticity and viscoelasticity of metals and polymers. Int. J. Solids Struct. 34(18), 2239–2254 (1997a)
Chaboche, J.L.: A review of some plasticity and viscoplasticity constitutive theories. Int. J. Plast 24, 1642–1693 (2008)
Egner, H.: On the full coupling between thermo-plasticity and thermo-damage in thermodynamic modelling of dissipative materials. Int. J. Solids Struct. 49, 279–288 (2012)
Ganczarski, A., Skrzypek, J.: A study on coupled thermo-elasto-plastic-damage dissipative phenomena: models and application to some innovative materials. J. Therm. Stresses 32, 698–751 (2009)
Kowalsky, U., Ahrens, H., Dinkler, D.: Distorted yield surfaces-modelling by higher order anisotropic hardening tensors. Comput. Mater. Sci. 16, 81–88 (1999)
Lemaitre, J.: A course on damage mechanics. Springer, Berlin (1992)
Lemaitre, J., Chaboche, J.L.: Mechanics of solid materials. Cambridge University Press, London (1990)
Murakami, S., Ohno, N.: A continuum theory of creep and creep damage. In: Ponter, A.R.S., Hayhurst, D.R. (eds.) Creep in Structures, 3rd IUTAM Symposium on Creep in Structures, pp. 422–444. Springer, Berlin (1980)
Ottosen, N.S., Ristinmaa, M.: The mechanics of constitutive modelling. Elsevier, Amsterdam (2005)
Velay, V., Bernhart, G., Penazzi, L.: Cyclic behavior modelling of a tempered martensitic hot work tool steel. Int. J. Plast 22, 459–496 (2006)
Acknowledgments
The Grant No. 2285/B/T02/2011/40 from the Polish Ministry of Science and Higher Education is gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Egner, H., Egner, W. (2013). Modelling of Coupled Dissipative Phenomena in Engineering Materials. In: Altenbach, H., Kruch, S. (eds) Advanced Materials Modelling for Structures. Advanced Structured Materials, vol 19. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-35167-9_14
Download citation
DOI: https://doi.org/10.1007/978-3-642-35167-9_14
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-35166-2
Online ISBN: 978-3-642-35167-9
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)