Abstract
Ultrasonic spray technology is used to prepare the coating of stent. Based on the mechanism of coating surface and the parametric model of ultrasonic spray process, an orthogonal experiment using THF and 30% PEO-PSF is carried out to optimize the processing parameters. It shows that the flow rate, gas pressure and feeding speed are the main parameters influencing the quality of coating surface. Besides, experiments have verified the rationality of optimized parameters, and the optimized process eliminates the common surface defects such as webbing, bridge, etc. AFM image indicates that within a 2μm×2μm scope, the coating roughness is reduced from 6.35nm to 1.72nm which improves the surface quality remarkably. The weighted results of coating mass tells the average mass deviation is about 7.5μg which shows the ultrasonic spray process has good repeatability.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Pan, C.J., Tang, J.J., et al.: Preparation, characterization and anticoagulation of curcumin-eluting controlled biodegradable coating stents. Journal of Controlled Release 116, 42–49 (2006)
Hanefeld, P., Agarwal, S., et al.: In Vitro Study of Dexamethasone Release From Poly (p-xylylene) Films. Macromol. Chem. Phys. 211, 265–269 (2010)
Hossainy, S.F.A., Sanders-Millare, D., Guruwaiya, J., et al.: Bio compatible coating. PCT Publication: No WO 01/45763 (June 28, 2001)
Jan, H., Eftichia-Vassiliki, Z.: Heparin stent. PCT Publication: No WO 03/011250 (February 13, 2003)
Dubois-Rande, J., Doan, T.L., Pham, M.C., et al.: Implantable device covered with polymer Capable of releasing biologically active substances. USA: No 6 468 304 (October 22, 2002)
Guidance for Industry:Coronary Drug-Eluting Stents—Nonclinical and Clinical Studies. FDA & CDRH&CDER, USA (March 26, 2008)
Lang, R.J.: Ultrasonic atomization of liquids. Acoust. Soc. Am. 34, 6 (1962)
Berger, H.L.: Ultrasonic liquid atomization: Theory and Application. Partridge Hill Publishers, USA (2006)
Orchard, S.E.: On surface leveling in viscous liquids and gels. Appl. Sci. Res. A(11), 451–464 (1961)
Rajan, R., Pandit, A.B.: Correlations to predict droplet size in ultrasonic atomization. Ultrasonics 39, 235–255 (2001)
Pohlman, R., Heisler, K., Cichos, M.: Powdering aluminium and aluminium alloys by ultrasound. Ultraconics 12(1), 11–15 (1974)
Avvaru, B., Patil, M.N., Gogate, P.R., Pandit, A.B.: Ultrasonic atomization: Effect of liquid phase properties. Ultrasonics 44, 146–158 (2006)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Xingzhong, G., Jie, H., Zhonghua, N. (2012). Optimization of Coatings for Vascular Stent with Ultrasonic Spray Technology. In: Zeng, D. (eds) Advances in Control and Communication. Lecture Notes in Electrical Engineering, vol 137. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-26007-0_68
Download citation
DOI: https://doi.org/10.1007/978-3-642-26007-0_68
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-26006-3
Online ISBN: 978-3-642-26007-0
eBook Packages: EngineeringEngineering (R0)