Skip to main content
SpringerLink
Log in

How Can Software SMEs Become Medical Device Software SMEs

  • Conference paper
Systems, Software and Service Process Improvement (EuroSPI 2011)

Part of the book series: Communications in Computer and Information Science ((CCIS,volume 172))

Included in the following conference series:

Abstract

The amount of software content within medical devices has grown considerably over recent years and will continue to do so as the level of complexity of medical devices increase. This is driven by the fact that software is introduced to produce sophisticated medical devices that would not be possible using only hardware. This therefore presents opportunities for software development SMEs to become medical device software development organisations. However, some obstacles need to be addressed and overcome in order to make the transition from being a generic software development organisation to becoming a medical device software development organisation. This paper describes these obstacles and how research that is currently being performed within the Regulated Software Research Group in Dundalk Institute of Technology may be used to assist with this transition.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 39.99
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Lee, I., Pappas, G., Cleaveland, R., Hatcliff, J., Krogh, B., Lee, P., Rubin, H., Sha, L.: High-Confidence Medical Device Software And Systems. Computer 39(4), 33–38 (2006)

    Article  Google Scholar 

  2. Rakitin, R.: Coping with defective software in medical devices. Computer 39(4), 40–45 (2006)

    Article  Google Scholar 

  3. Burton, J., Mc Caffery, F., Richardson, I.: A risk management capability model for use in medical device companies. In: International Workshop on Software quality (WoSQ 2006). ACM, Shanghai (2006)

    Google Scholar 

  4. Mc Caffrey, F., Burton, J., Casey, V., Doring, A.: Software Process Improvement in the Medical Device Industry. In: Laplante, P. (ed.) Encyclopedia of Software Engineering, pp. 528–540. CRC Press Francis Taylor Group, New York (2010)

    Google Scholar 

  5. McCaffery, F., Dorling, A., Casey, V.: Medi SPICE: An Update. In: International Conference on Software Process Improvement and Capability Determinations (SPICE). Edizioni ETS, Pisa (2010)

    Google Scholar 

  6. US FDA Center for Devices and Radiological Health, General Principles of Software Validation, Final Guidance for Industry and FDA Staff. 2002. CDRH, Rockville (2002)

    Google Scholar 

  7. US FDA Center for Devices and Radiological Health, Guidance for the Content of Premarket Submissions for Software Contained in Medical Devices. CDRH, Rockville (2005)

    Google Scholar 

  8. US FDA Center for Devices and Radiological Health, Off-The-Shelf Software Use in Medical Devices; Guidance for Industry, medical device Reviewers and Compliance. CDRH, Rockville (1999)

    Google Scholar 

  9. ISO/IEC 12207:1995, Information Technology — Software life Cycle Processes. ISO: Geneva, Switzerland (1995)

    Google Scholar 

  10. ANSI/AAMI SW68:2001, Medical device software - Software life cycle processes. AMMI, Arlington (2001)

    Google Scholar 

  11. IEC 62304:2006, Medical device software—Software life cycle processes. IEC, Geneva, Switzerland (2006)

    Google Scholar 

  12. European Council, Council Directive 93/42/EEC Concerning Medical Devices. Official Journal of The European Communities, Luxembourg (1993)

    Google Scholar 

  13. European Council, Council Directive 2000/70/EC (Amendment), Official Journal of The European Union, Luxembourg (2000)

    Google Scholar 

  14. European Council, Council Directive 2001/104/EC (Amendment). Official Journal of The European Union, Luxembourg (2001)

    Google Scholar 

  15. European Council, Council Directive 2003/32/EC (Amendment). Official Journal of The European Union, Luxembourg (2003)

    Google Scholar 

  16. European Council, Council Directive 2007/47/EC (Amendment). Official Journal of The European Union, Luxembourg (2007)

    Google Scholar 

  17. ISO 14971:2007, Medical Devices — Application of risk management to medical devices. ISO, Geneva (2007)

    Google Scholar 

  18. BS EN 60601-1-4:2000, Medical Electrical Equipment, Part 1 - General requirements for safety. BSI, London (2000)

    Google Scholar 

  19. AAMI TIR32:2004, Medical device software risk management. AAMI, Arlington (2005)

    Google Scholar 

  20. IEC/TR 80002-1:2009, Medical device software Part 1: Guidance on the application of ISO 14971 to medical device software. BSI, London (2009)

    Google Scholar 

  21. IEC 62366:2007, Medical devices - Application of usability engineering to medical devices. IEC: Geneva, Switzerland (2007)

    Google Scholar 

  22. GAMP 5:2008, A Risk-Based Approach to Compliant GxP Computerized System. ISPE, Florida (2008)

    Google Scholar 

  23. IEC/TR 61508:2005, Functional safety of electrical/electronic/ programmable electronic safety related systems. BSI, London (2005)

    Google Scholar 

  24. ISO 13485:2003, Medical devices — Quality management systems — Requirements for regulatory purposes. ISO, Geneva, Switzerland (2003)

    Google Scholar 

  25. IEC 60812:2006, Analysis technique for system reliability - Procedure for failure modes and effects analysis (FMEA). IEC: Geneva, Switzerland (2006)

    Google Scholar 

  26. US FDA, 21 CFR Part 880 Medical Devices; Medical Device Data Systems Final Rule. Federal Register 76(31), 8637–8649 (2011)

    Google Scholar 

  27. European Council, Council Directive 90/385/EEC On the approximation of the laws of the Members States relating to active implantable medical devices. Official Journal of The European Communities, Luxembourg (1990)

    Google Scholar 

  28. European Council, Council Directive 98/8/EC Concerning the placing of biocidal products on the market. Official Journal of The European Communities, Luxembourg (1998)

    Google Scholar 

  29. Thompson, B., FDA Regulations of Mobile Health. In: Mobi Health News, p. 51. Chester Street Publishing (2010)

    Google Scholar 

  30. McCaffery, F., Dorling, A.: Medi SPICE: An Overview. In: International Conference on Software Process Improvement and Capability Determinations (SPICE), Turku, Finland (2009)

    Google Scholar 

  31. ISO/IEC 15504-5:2006, Information technology — Process Assessment — Part 5: An Exemplar Process Assessment Model. ISO, Geneva, Switzerland (2006)

    Google Scholar 

  32. Automotive SPICE Process Assessment. SIG (August 21, 2005)

    Google Scholar 

  33. Mc Caffery, F., Richardson, I., Coleman, G.: Adept – A Software Process Appraisal Method for Small to Medium-sized Irish Software Development Organisations. In: European Systems & Software Process Improvement and Innovation (EuroSPI 2006), Joensuu, Finland (2006)

    Google Scholar 

  34. CMMI Product Team, Capability Maturity Model ® Integration for Development Version 1.2, Software Engineering Institute (2006)

    Google Scholar 

  35. Mc Caffery, F., Casey, V.: Med-Adept: A Lightweight Assessment Method for the Irish Medical Device Software Industry. In: European Systems & Software Process Improvement and Innovation Conference (EuroSPI), Grenoble, France (2010)

    Google Scholar 

  36. Anacleto, A., von Wangenheim, C.G., Salviano, C.F., Savi, R.: Experiences gained from applying ISO/IEC 15504 to small software companies in Brazil. In: 4th International SPICE Conference on Process Assessment and Improvement, Lisbon, Portugal (2004)

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Regulated Software Research Group, Dundalk Institute of Technology & Lero, Dundalk, Co. Louth, Ireland

    Fergal McCaffery, Valentine Casey & Martin McHugh

Authors
  1. Fergal McCaffery
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Valentine Casey
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Martin McHugh
    View author publications

    You can also search for this author in PubMed Google Scholar

Editor information

Editors and Affiliations

  1. Lero, The Irish Software Engineering Research Centre, School of Computing, Dublin City University, Dublin, Ireland

    Rory V. O‘Connor

  2. Roskilde University, Roskilde, Denmark

    Jan Pries-Heje

  3. ISCN Ltd., Graz, Austria

    Richard Messnarz

Rights and permissions

Reprints and permissions

Copyright information

© 2011 Springer-Verlag Berlin Heidelberg

About this paper

Cite this paper

McCaffery, F., Casey, V., McHugh, M. (2011). How Can Software SMEs Become Medical Device Software SMEs. In: O‘Connor, R.V., Pries-Heje, J., Messnarz, R. (eds) Systems, Software and Service Process Improvement. EuroSPI 2011. Communications in Computer and Information Science, vol 172. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-22206-1_22

Download citation

  • DOI: https://doi.org/10.1007/978-3-642-22206-1_22

  • Publisher Name: Springer, Berlin, Heidelberg

  • Print ISBN: 978-3-642-22205-4

  • Online ISBN: 978-3-642-22206-1

  • eBook Packages: Computer ScienceComputer Science (R0)

Publish with us

Policies and ethics

Search

Navigation