Abstract
Manufacturing companies in high-wage countries are increasingly set under pressure in international competition due the lower production costs in low-wage countries. In order to counteract this development, many manufacturing companies respond to this issue by relocating their production facilities. Due to industrial production’s high dependence on other sectors such as the services sector, this trend threatens Europe’s medium and long term prosperity since outsourcing generally leads to subsequent relocation of services as well as of research and development activities (Lau 2005). With over 40% of German employees assigned to the manufacturing sector, production plays a key role in the national economy of Germany. Consequently, relocation of production poses huge risks for the country’s future economic development (Statistisches Bundesamt 2010).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
The structures are according to Giddens, rules of signification and legitimation and resources of domination (Giddens 1984).
- 2.
According to Windeler the actors monitor, supervise and control what happens “in that they recognise the potential and create test events, understand these and extend them. By doing this they control their behaviour or that of others by directing activities and securing them.” (Windeler 2002).
- 3.
At this point it should be mentioned that every research project, including the example quoted here of the Cluster of Excellence “Integrative Production Technology for High Wage Countries” at RWTH University in Aachen, is subject to certain project-specific constraints (e.g. spatial and temporal constraints) and that there is no standardised pattern for projects in interdisciplinary research networks. This means that an effective model must adapt to the individual contextual conditions of an academically intensive organisation.
- 4.
SENEKA was given a project duration of five years (1999–2004) within the framework of the pilot project initiative “Making Use of Internationally Available Knowledge for Educational and Further Educational Innovation Processes” of the German Federal Ministry of Education and Research (BMBF). The participants were 20 small and medium-sized enterprises, 3 large companies, 6 research institutes, and associated partners included more than 38 organisations and enterprises in Germany and the rest of the world (further information is available online at http://www.seneka.rwth-aachen.de/).
- 5.
In the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”, interdisciplinary research is processed in six integrative cluster domains (ICDs).
References
Ahrens D (2003) Was sind Netzwerke? In: Henning K, Oertel R, Isenhardt I (eds) Wissen – Innovation – Netzwerke. Wege zur Zukunftsfähigkeit. Springer, Berlin, pp 44–55
Ahrens D, Frank S, Franssen M, Riedel M, Schmette M (2004) Phasen der Netzwerkentwicklung und des Netzwerkmanagements. Das Netzwerk-Kompendium – Theorie und Praxis des Netzwerk-managements. Shaker, Aachen, pp 17–24
Beckermann S et al (2008) Roadmapping: Geschäftserfolg durch zielgerichtete Technologieentwicklung. In: AWK Aachener Werkzeugmaschinen-Kolloquium Wettbewerbsfaktor Produktionstechnik. Apprimus Verlag, Aachen, pp 513–536
Bogaschewsky R, Steinmetz U (1999) Effizienzbetrachtungen in der Theorie der betrieblichen Produktion. Dresdner Beiträge zur Betriebswirtschaftslehre 22
Brinksmeier E et al (2006) Advances in modeling and simulation of grinding processes. Ann CIRP 55(2):667–696
Brun A, Zorzini M (2009) Evaluation of product customization strategies through modularization and postponement. Int J Prod Econ 120:205–220
Buhl C, Meier zu Köcker G (2009) Kategorien von Netzwerkservices. Bundesministerium für Wirtschaft und Technologie Innovative Netzwerkservices. Netzwerk- und Clusterentwicklung durch maßgeschneiderte Dienstleistungen, Berlin. Online verfügbar unter: http://www.kompetenznetze.de/service/bestellservice/medien/publikation_netzwerkservices_internetversion.pdf
Chen CC (2008) An objective-oriented and product-line-based manufacturing performance measurement. Int J Prod Econ 112(1):380–390
Chenery HB (1949) Engineering production functions. Q J Econ 63:507–531
Corsten H, Gössinger R (2009) Produktionswirtschaft. Einführung in das industrielle Produktionsmanagement, 12. Aufl. Oldenbourg, München
Deutsche Industrie- und Handelskammer (ed): Auslandsinvestitionen in der Industrie (2010) Ergebnisse der DIHK-Umfrage bei den Industrie- und Handelskammern; DIHK, Berlin, Brüssel
Dyckhoff H (2009) Produktionstheorie. Grundzüge industrieller Produktionswirtschaft, 5. Aufl. Springer, Berlin
European Industrial Research Management Association (ERIMA) (ed) (1997) Technology roadmapping – delivering business vision, Working Group Report. ERIMA, Paris
Eversheim W, Schuh G (1996) Produktion und Management; Betriebshütte. 7. Aufl. Springer, Berlin
Eversheim W, Schmidt K, Weber P (2002) Virtualität in der Wertschöpfungskette – Durchgängig von der Produktentwicklung bis zur Produktionsplanung. wt Werkstattstechnik Online 92(4):149–153
Eyers DR, Dotchev KD (2009) Rapid manufacturing for mass customisation. In: IPROMS conference proceedings 2009, Cardiff, UK
Fandel G (2005) Produktion I. Produktions- und Kostentheorie, 6. Aufl. Springer, Berlin
Feiner A et al (2005) Werkzeugmaschinen für die Produktion von morgen im Spannungsfeld: flexibel und einfach, schnell und genau. In: Eversheim W et al (eds) Wettbewerbsfaktor Produktionstechnik, Aachener Werkzeugmaschinen Kolloquium 2005. Shaker, Aachen, pp 373–409
Gausemeier J, Frank U, Schmidt A, Steffen D (2006) Towards a design methodology for self-optimizing systems. In: Advances in design, Springer series in advanced manufacturing, Part 1. Springer, London, pp 61–71
Giddens A (1984) The constitution of society. Outline of the theory of structuration. Polity Press, Cambridge
Glaser B, Strauss A (2008) Grounded theory. Strategien qualitativer Forschung. Huber, Bern
Gottschalk S, Kupke D, Lohse W, Vitre M, Wesch C (2007) Virtuelle Produktionssysteme. In: Schuh G, Klocke F, Brecher C, Schmitt R (eds) Excellence in Production. Apprimus Verlag, Aachen, pp 75–88
Grubbström RW, Olhager J (1997) Productivity and flexibility: fundamental relations between two major properties and performance measures of the production system. Int J Prod Econ 52:73–82
Gutenberg E (1983) Grundlagen der Betriebswirtschaftslehre, Bd 1 Die Produktion, 24. Aufl. Springer, Berlin
Heinen E (1983) Betriebswirtschaftliche Kostenlehre, 6. Aufl. Gabler, Wiesbaden
Hunecke H, Sauer J (2003) Innovation in Netzwerken. In: Henning K, Oertel R, Isenhardt I (eds) Wissen – Innovation – Netzwerke. Wege zur Zukunftsfähigkeit. Berlin, Springer, pp 55–60
Jooß C, Welter F, Richert A, Jeschke S, Brecher C (2010) A Management approach for Interdisciplinary research networks in a knowledge-based society – case study of the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”. In: Proceedings of the international conference of education, research and innovation (ICERI) 2010, Madrid. Online access: http://library.iated.org/authors/"Claudia+Jooß"
Kaplan R, Norton D (1992) The balanced scorecard measures that drive performance. Har Bus Rev 001:71–79
Kaplan R, Norton D (1997) Balanced Scorecard – Strategien erfolgreich umsetzen. Schäffer-Poeschel, Stuttgart
Klocke F, König W (2006) Fertigungsverfahren 4, Urformen, 5. Aufl. Springer, Berlin
Klocke F, König W (2008) Fertigungsverfahren 1, Drehen, Fräsen, Bohren, 8. Aufl. Springer, Berlin
Klocke F, Zeppenfeld C, Roderburg A (2007) Hybride Produktionssysteme. In: Schuh G, Klocke F, Brecher C, Schmitt R (eds) Excellence in Production. Apprimus Verlag, Aachen, pp 89–106
Klocke F, Timmer A, Bäcker V, Tönissen S, Frank P, Kauffmann P, Wächter D, Hollstegge D (2009) Manufacturing-related product properties: challenges and changes. 1st international conference on product property prediction, Bochum, pp 667–696
Kloock J (1969) Betriebswirtschaftliche Input- und Output-Modelle. Gabler, Wiesbaden
Küpper HU (1979) Dynamische Produktionsfunktionen der Unternehmung auf der Basis des Input/Output-Ansatzes. Z Betriebswirt 49
Lau A (2005) Going International. Erfolgsfaktoren im Auslandsgeschäft. Zusammenfassung der wichtigsten Ergebnisse. DIHK – Deutscher Industrie- und Handelskammertag, Berlin
Leontieff W (1951) The structure of the American economy, 1919–1939. New York
Matthes W (1979) Dynamische Einzelproduktionsfunktion der Unternehmung (Produktionsfunktion vom Typ F). Betriebswirtschaftliches Arbeitspapier Nr. 2, Seminar für Fertigungswirtschaft der Universität zu Köln
Nyhuis P, Wienhdahl HP (2010) Ansatz zu einer Theorie der Produktionstechnik. ZWF 105, Jg 1–2. Carl Hanser, München, pp 15–20
Orilski S, Beckermann S, Schuh G (2008) Technology roadmapping: aligning technology planning. In: IAMOT 2008 proceedings of 17th international conference on management of technology, Dubai, UAE
Phaal R, Farrukh CJP, Probert DR (2004) Technology roadmapping – a planning framework for evolution and revolution. Technol Forecast Soc Change 71:5–26
Potinecke T, Slama A (2005) Virtual engineering optimal nutzen. Ind Manag 21(2):55–58
Röbbecke M, Simon D, Lengwiler M, Kraetsch C (2004) Inter-Disziplinieren. Erfolgsbedingungen von Forschungskooperationen. Ed. Sigma, Berlin
Rohrbeck R, Heuer J, Arnold H (2006) The technology radar – an instrument of technology intelligence and innovation strategy. In: The 3rd IEEE international conference on management of innovation and technology, Singapur, pp 978–983
Rose G, Treiver V (2005) Offshoring of R&D – examination of Germany’s attractiveness as a place to conduct research. DIHK, Berlin
Sauer J (2005) Förderung von Innovationen in heterogenen Forschungsnetzwerken und Evaluation am Beispiel des BMBF-Leitprojektes SENEKA. Aachener Reihe Mensch und Technik, Wissenschaftsverlag Mainz
Schuh G, Gottschalk S (2008) Production engineering for self-organizing complex systems. Prod Eng 2(4):431–435
Schuh G, Klappert S, Orilski S (2011a) Technologieplanung. In: Schuh G, Klappert S (eds) Technologiemanagement. Handbuch Produktion und Management 2. Springer, Berlin, pp 171–222
Schuh G, Kreysa J, Orilski S (2009) Roadmap “Hybride Produktion”. ZWF – Z Wirtsch Fabrikbetr 104(5):385–391
Schuh G, Orilski S (2007) Roadmapping for competitiveness of high wage countries. In: Proceedings of the XVIII ISPIM Annual Conference,Warschau, Polen
Schuh G, Orilski S, Kreysa J (2007) Chancen für die Produktion in Hochlohnländern. In: Schuh G, Klocke F, Brecher C, Schmitt R (eds) Excellence in Production. Apprimus Verlag, Aachen, pp 31–53
Schuh G, Orilski S, Schubert J (2011b) Roadmapping for the virtual production. In: Proceedings of the international conference on advances in production management systems (APMS 2010). Cernobbio, Italien
Schultmann F (2003) Stoffstrombasiertes Produktionsmanagement. Betriebswirschaftliche Planung und Steuerung industrieller Kreislaufwirtschaftssysteme. Schmidt, Berlin
Schwalbach J (2004) Produktionstheorie. Wahlen, München
Schweyer HE (1955) Process Engineering Economics. McGraw-Hill, New York
Siebert H (2006) Ökonomische Analyse von Unternehmensnetzwerken. In: Sydow J (ed) Management von Netzwerkorganisationen. Beiträge aus der „Managementforschung“. Gabler, Wiesbaden, pp 7–27
Smith V (1961) Investment and Production. Cambridge
Sonntag S, Kistner KP (2004) Die Gutenberg-Produktionsfunktion. Eigenschaften und technische Fundierung, 1. Aufl. DUV, Wiesbaden
Stackelberg H (1932) Grundlagen einer reinen Kostentheorie. Springer, Wien
Statistisches B (2010) Bevölkerung und Erwerbstätigkeit. Struktur der sozialversicherungspflichtigen Beschäftigten. Stand: 31. Dezember 2009. Statistisches Bundesamt, Wiesbaden 2010
Statistisches B (2011) Produzierendes Gewerbe. Beschäftigung und Umsatz der Betriebe des Verarbeitenden Gewerbes sowie des Bergbaus und der Gewinnung von Steinen und Erden 2010. Statistisches Bundesamt, Wiesbaden
Steven M (1998) Produktionstheorie. Gabler, Wiesbaden
Strauss A, Corbin J (1996) Grounded theory: Grundlagen qualitativer Forschung. Beltz, Weinheim
Strübing J (2008) Grounded theory: Zur sozialtheoretischen und epistemologischen Fundierung des Verfahrens der empirisch begründeten Theoriebildung. VS Verlag, Wiesbaden
Suwignjo P, Bititci US, Carrie AS (2000) Quantitative models for performance measurement system. Int J Prod Econ 64:231–241
Sydow J (2003) Dynamik von Netzwerkorganisationen: Entwicklung, Evolution, Strukturation. In: Hoffmann WH, Grün O (eds) Die Gestaltung der Organisationsdynamik. Konfiguration und Evolution; Festschrift für Professor Dipl.-Kfm. Dr. Oskar Grün zum 65. Geburtstag. Schäffer-Poeschel, Stuttgart, pp 327–356
Sydow J (2006) Management von Netzwerkorganisationen – Zum Stand der Forschung. In: Sydow J (ed) Management von Netzwerkorganisationen. Beiträge aus der „Managementforschung“. Gabler, Wiesbaden, pp 385–469
Sydow J, van Well B (2006) Wissensintensiv durch Netzwerkorganisation – Strukturationstheoretische Analyse eines wissensintensiven Netzwerks. In: Sydow J (ed) Management von Netzwerkorganisationen. Beiträge aus der „Managementforschung“. 4., aktualisierte und erw. Aufl. Gabler, Wiesbaden, pp 143–186
Sydow J, Zeichhardt R (2009) Bedeutung von Netzwerkservices für den Erfolg von Netzwerken. Bundesministerium für Wirtschaft und Technologie Innovative Netzwerkservices. Netzwerkund Clusterentwicklung durch maßgeschneiderte Dienstleistungen, Berlin, pp 21–29
Tseng MM, Jiao J (1996) Design for mass customiziaton. Ann CRIP 45(1):153–156
Tseng MM (2003) Industry development perspectives: global distribution of work and market. CIRP 53rd General Assembly, Montreal, Canada
Vinkemeier R (2008) Gesamtkonzept zur langfristigen Steuerung von Innovationen – Balanced Innovation Card im Zusammenspiel mit Roadmaps. In: Möhrle MG, Isenmann R (eds) Technologie-Roadmapping. Springer, Berlin, pp 279–295
Walsh ST (2004) Roadmapping a disruptive technology: a case study. Technol Forecast Soc Change 71:161–185
Wellensiek M, Schuh G, Hacker PA, Saxler J (2011) Technologiefrüherkennung. In: Schuh G, Klappert S (eds) Technologiemanagement. Handbuch Produktion und Management 2. Springer, Berlin, pp 89–169
Weller W (2008) Automatisierungstechnik im Überblick. Was ist, was kann Automatisierungstechnik? Beuth, Berlin
Welter F, Vossen R, Richert A, Isenhardt I (2010) Network management for clusters of excellence: a balanced-scorecard approach as a performance measurement tool. Bus Rev Camb 15(1):171–178
Wibe S (2004) Engineering and economic laws of production. Int J Prod Econ 92:203–206
Wiendahl H-P (2005) Betriebsorganisation für Ingenieure, 5. Aufl. Hanser, München
Windeler A (2002) Unternehmensnetzwerke. Konstitution und Strukturation. Durchgesehener Nachdruck (1. Aufl. 2001). Wiesbaden
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Brecher, C. et al. (2012). Integrative Production Technology for High-wage Countries. In: Brecher, C. (eds) Integrative Production Technology for High-Wage Countries. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-21067-9_2
Download citation
DOI: https://doi.org/10.1007/978-3-642-21067-9_2
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-21066-2
Online ISBN: 978-3-642-21067-9
eBook Packages: EngineeringEngineering (R0)