Abstract
The paper deals with the problem of design and manufacturing workflows in a large enterprise. As an example of a workflow, we presented the author’s model of coordination of design documentation (DD) based on the Petri net. The model was analyzed for possible errors in system designing.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Afanas’ev, A.N., Voit, N.N., Bochkov, S.I., Uhanova, M.E., Ionova, I.S.: Razrabotka i issledovanie virtual’nyh rabochih mest v srede OPENSIM. Vestnik Ul’yanovskogo gosudarstvennogo tehnicheskogo universiteta 4(76), 43–47 (2016). (in Russia). https://elibrary.ru/item.asp?id=27645868. Accessed 156 Mar 2018
Afanas’ev, A.N., Voit, N.N., Uhanova, M.E., Ionova, I.S., Epifanov, V.V.: Analiz konstruktorsko-tehnologicheskih potokov rabot v usloviyah krupnogo radiotehnicheskogo predpriyatiya. Radiotehnika 6, 49–58 (2017). (in Russia). http://www.radiotec.ru/article/19581. Accessed 15 Mar 2017
Karpov, Y.G.: Model Shecking. Verifikaciya parallel’nyh i raspredelennyh programmnyh sistem. BHV-Peterburg (2010). (in Russia)
Goncharuk, Y.O.: Problemy sozdaniya i vnedreniya modeli biznes-processov predpriyatiya v forme WorkflowSystem. Resursoeffektivnym tehnologiyam-energiyu i entuziazm molodyh: sbornik nauchnyh trudov VI Vserossiiskoi konferencii, pp. 263–272 (2015). (in Russia)
Awad, A., Puhlmann, F.: Structural detection of deadlocks in business process models. In: Abramowicz, W., Fensel, D. (eds.) BIS 2008. LNBIP, vol. 7, pp. 239–250. Springer, Heidelberg (2008). https://doi.org/10.1007/978-3-540-79396-0_21
Aguilar, J.C.P., et al.: Model checking of BPMN models for reconfigurable workflows. arXiv preprint (2016). arXiv:1607.00478
Janssen, W., Mateescu, R., Mauw, S., Fennema, P., van der Stappen, P.: Model checking for managers. In: Dams, D., Gerth, R., Leue, S., Massink, M. (eds.) SPIN 1999. LNCS, vol. 1680, pp. 92–107. Springer, Heidelberg (1999). https://doi.org/10.1007/3-540-48234-2_7
Kheldoun, A., Barkaoui, K., Ioualalen, M.: Specification and verification of complex business processes - a high-level petri net-based approach. In: Motahari-Nezhad, H.R., Recker, J., Weidlich, M. (eds.) BPM 2015. LNCS, vol. 9253, pp. 55–71. Springer, Cham (2015). https://doi.org/10.1007/978-3-319-23063-4_4
Afanasyev, A.N., Voit, N.N., Ukhanova, M.E., Ionova, I.S.: Treatment design-engineering workflows in large enterprises
Trohalinyu, I.: Locman: PLM 2017: Bylo i stalo. Obzor novyh vozmozhnostei v upravlenii dannymi ob izdeliyah mashinostroeniya. SAPR i grafika (2017). (in Russia)
Kochan, I.: T-FLEXPLM na mezhdunarodnom rynke. SAPR i grafika (2017). (in Russia)
Egorov, P.: Proekt “Razvitie SAPR” na baze Kompleksa ASKON. SAPR i grafika (2017). (in Russia)
Vedmid’, P., Vlasov, V.: PLM sistemy menedzhmenta kachestva. SAPR i grafika (2017). (in Russia)
Skvoznaya 3D-tehnologiya ASKON dlya predpriyatii mashinostroeniya (in Russia). http://ct3d.ru. Accessed 15 Mar 2017
Afanas’ev, A.N., Voit, N.N.: Razrabotka i issledovanie sredstv izvlecheniya iz SAPR KOMPAS-3D i predstavleniya v veb-sistemah konstruktorskogo opisaniya, 3D-modelei promyshlennyh detalei i sborok. V sbornike: Sistemy proektirovaniya, tehnologicheskoi podgotovki proizvodstva i upravleniya etapami zhiznennogo cikla promyshlennogo produkta (SAD/CAM/PDM - 2015) Trudy mezhdunarodnoi konferencii, pp. 208–212 (2015). (in Russia)
Afanas’ev, A.N., Voit, N.N.: Komponentnaya avtomatizirovannaya obuchayushaya sistema SAPR na osnove gibridnoi neironnoi seti. Avtomatizaciya. Sovremennye tehnologii 3, 14–18 (2009)
Afanas’ev, A.N., Voit, N.N.: Razrabotka komponentno-servisnoi platformy obucheniya: diagrammy ispol’zovaniya i deyatel’nosti programmnogo komponenta scenariya na UML-yazyke. Vestnik Ul’yanovskogo gosudarstvennogo tehnicheskogo universiteta 1(57), 66–68 (2012). (in Russia)
Afanas’ev, A.N., Voit, N.N.: Realizaciya konstruktora scenariya obuchayushih kursov. Vestnik Ul’yanovskogo gosudarstvennogo tehnicheskogo universiteta 1(53), 54–59 (2011)
Afanas’ev, A.N., Voit, N.N.: Razrabotka metodov nechetkoi parametricheskoi adaptivnoi diagnostiki obuchaemogo inzhenera. Avtomatizaciya processov upravleniya 3, 51–56 (2009). (in Russia)
Afanas’ev, A.H., Igonin, A.G., Afanas’eva, T.V., Voit, N.N.: Ispol’zovanie neirosemanticheskih setei dlya avtomatizirovannogo proektirovaniya vychislitel’noi tehniki. Avtomatizaciya. Sovremennye tehnologii 1, 21–24 (2008). (in Russia)
Afanasyev, A.N., Voit, N.N., Kirillov, S.Y.: Development of RYT-grammar for analysis and control dynamic workflows. In: 2017 International Conference on Computing Networking and Informatics (ICCNI), pp. 1–4 (2017). https://doi.org/10.1109/iccni.2017.8123797, http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8123797&isnumber=8123766. Accessed 15 Mar 2017
Voit, N.N.: Development of timed RT-grammars for analysis of business process at manufacturing and in cyber-physical systems. In: 2017 International Conference on Computing Networking and Informatics (ICCNI), pp. 1–5 (2017). https://doi.org/10.1109/iccni.2017.8123798, http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8123798&isnumber=812376. Accessed 15 Mar 2017
Afanasyev, A.N., Voit, N.N., Gainullin, R.F.: Diagrammatic models processing in designing the complex automated systems. In: 10th IEEE International Conference on Application of Information and Communication Technologies (AICT) 2016, pp. 441–445 (2016)
Afanasyev, A., Voit, N.: Intelligent agent system to analysis manufacturing process models. In: First International Scientific Conference « Intelligent Information Technologies for Industry » (IITI 2016), Advances in Intelligent Systems and Computing, Russia, vol. 451, pp. 395–403 (2016)
Afanasyev, A.N., Voit, N.N., Voevodin, E.Y., Gainullin, R.F.: Control of UML diagrams in designing automated systems software. In: 9th IEEE International Conference on Application of Information and Communication Technologies, AICT-2015, pp. 285–288 (2015)
Afanasyev, A., Voit, N.: Multi-agent system to analyse manufacturing process models. In: International Conference on Fuzzy Logic and Intelligent Technologies in Nuclear Science - FLINS2016, France, pp. 444–449 (2016)
Afanasyev, A., Voit, N., Gaynullin, R.: The analysis of diagrammatic models of workflows in design of the complex automated systems. In: Abraham, A., Kovalev, S., Tarassov, V., Snášel, V. (eds.) Proceedings of the First International Scientific Conference “Intelligent Information Technologies for Industry” (IITI’16). AISC, vol. 450, pp. 227–236. Springer, Cham (2016). https://doi.org/10.1007/978-3-319-33609-1_20
Statistics of business effects from the introduction of end-to-end workflow technology. https://sd7.ascon.ru/Public/Промышленный%20форум%202018/02_Роль%20САПР%20в%20производстве%20готовой%20продукции_Иванов_Е.pdf. Accessed 12 May 2018
Vertical. https://ascon.ru/products/420/review/. Accessed 12 May 2018
T-FLEX Technology. http://tflex.com. Accessed 12 May 2018
ADEM TDM. http://www.dietz-cadcam.de/index.php?id=32&L=2. Accessed 12 May 2018
Sprut TP. https://www.sprut.ru/products-and-solutions/products/sprut-tp/. Accessed 12 May 2018
Unigraphics NX. https://www.plm.automation.siemens.com/global/en/products/nx/nx-for-design.html. Accessed 12 May 2018
CAM350. https://www.innofour.com/412/eda/pcb-systems-design/dfm-npi/cam350. Accessed 12 May 2018
Acknowledgments
This research is supported by the grant of the Ministry of Education and Science of the Russian Federation, the project No. 2.1615.2017/4.6. The reported study was funded by RFBR and Government of Ulyanovsk Region according to the research project No. 16-47-732152.
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG, part of Springer Nature
About this paper
Cite this paper
Afanasyev, A., Ukhanova, M., Ionova, I., Voit, N. (2018). Processing of Design and Manufacturing Workflows in a Large Enterprise. In: Gervasi, O., et al. Computational Science and Its Applications – ICCSA 2018. ICCSA 2018. Lecture Notes in Computer Science(), vol 10963. Springer, Cham. https://doi.org/10.1007/978-3-319-95171-3_44
Download citation
DOI: https://doi.org/10.1007/978-3-319-95171-3_44
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-95170-6
Online ISBN: 978-3-319-95171-3
eBook Packages: Computer ScienceComputer Science (R0)