Abstract
The use of supplementary cementitious materials (SCM) has become a major trend in concrete technology with effective utilization of industrial by-products (IBP) such as fly ash, ground granulated blast furnace slag and silica fume. Many types of industrial by-products (IBP) such as fly ash, silica fume, rice husk ash and waste glass are becoming the predominant source of mineral components with pozzolanic properties required to improve the performance of portland cement based materials. The availability of decent quality SCM has almost reached its limits and cannot offset the need for higher volumes of concrete required by developing markets. The use of alternative supplementary cementitious materials, including off-spec products and less-investigated by-products can be a viable alternative. However, there are many obstacles and limitations which hinder the utilization of such products. These are related to the lack of long-term results related to strength and durability, the potential variability in terms of composition and the presence of undesirable substances including heavy metals. These limitations dictate the need for higher production control and product consistency. This report presents the state of the art experience with utilization of modern technologies and potential SCM such as steel slag, pulverized bottom ash, sugarcane bagasse ash, waste glass and low-grade silica fume. Certainly, the current economic conditions make recycling feasible for only a limited number of by-products. Waste materials can be used only when they can be collected, processed, and reused at a cost the same or less than natural raw materials. To increase the rates of recycling, cement and concrete manufacturers need a uniform supply of quality waste; this would require better sorting and also the development of waste identification technology. On the other hand, it is also evident that innovative technologies capable of tolerating multiple contaminants are needed to boost the recycling of industrial by-products and waste beyond the current limits.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Altun IA, Yilmaz I (2002) Study on steel furnace slags with high MgO as additive in Portland cement. Cem Concr Res 32:1247–1249
Akinmusuru JO (1991) Potential beneficial uses of steel slag wastes for civil engineering purposes. Resour Conserv Recy 5:73–80
American Coal Ash Association (ACAA) (2006) Coal combustion product (CCP) production and use. Aurora, CO: American Coal Ash Association; 2007
American Recycler.com. Recycling glass into building materials. http://americanrecycler.com/8568759/index.php/news/glass/1065-recycling-glass-into-building-materials
American Society for Testing and Materials (ASTM) (2012) C618-12a, Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete
Americans Continue to Recycle More Than One in Three Glass Containers, October 27, 1999, Glass Packaging Institute, www.gpi.org/98rate.htm
Anagnostopoulos N, Sideris KK, Georgiadis A (2009) Mechanical characteristics of self-compacting concretes with different filler materials, exposed to elevated temperatures. Mater Struct 42(10):1393–1405
Anastasiou E, Papayianni I, Papachristoforou M (2014) Behavior of self-compacting concrete containing ladle furnace slag and steel fiber reinforcement. Mater Des 59:454–460
Apotheker S (1989) Glass processing: the link between collection and manufacture. Resour Recycl 7:38
Aras A, Albayrak M, Arikan M, Sobolev K (2007) Evaluation of selected kaolins as raw materials for the Turkish cement and concrete industry. Clay Miner 42(2):233
Argiz C (2013) Study of the use of bottom ash of the coal power plants as addiction of Portland cements. Comparative analysis with the fly ash. Ph.D. dissertation, ETSICCP (UPM), Madrid, Spain, 2014
Argiz C, Menéndez E, Sanjuán MA (2013) Effect of mixes made of coal bottom ash and fly ash on the mechanical strength and porosity of Portland cement. Mat Const 63(309):49–64. https://doi.org/10.3989/mc.2013.03911
Argiz C, Menéndez E, Moragues A, Sanjuán MA (2014) Recent advances in coal bottom ash use as a new common Portland cement constituent. Struct Eng Int 4:503–508
Arikan M, Sobolev K, Ertün T, Yeğinobali A, Turker P (2009) Properties of blended cements with thermally activated kaolin. Constr Build Mater 23(1):62–70
Asokan P, Saxena M, Asolekar SR (2005) Coal combustion residues-environmental implications and recycling potentials. Resour Conserv Recycl 43:239–262
ASTM C1202-12 (2012) Standard test method for electrical indication of concrete’s ability to resist chloride ion penetration. West Conshohocken, United States: Annual book of ASTM standards
Availability of Mining Wastes and Their Potential for Use as a Highway Material-Executive Summary (1977) Publication No. FHWA-RD-78-28, Federal Highway Administration, Washington D.C., September 1977
Azom (2012) Recycling EAF slag waste in commercial products. http://www.azom.com/article.aspx?ArticleID=1067
Bahurudeen A, Santhanam Manu (2015) Influence of different processing methods on the pozzolanic performance of sugarcane bagasse ash. Cem Concr Compos 56:32–45
Bahurudeen A, Marckson AV, Arun Kishore, Santhanam M (2014) Development of sugarcane bagasse ash based Portland pozzolana cement and evaluation of compatibility with superplasticizers. Constr Build Mater 68:465–475
Bahurudeen A, Kanraj D, Gokul Dev V, Santhanam M (2015) Performance evaluation of sugarcane bagasse ash blended cement in concrete. Cem Concr Compos 59:77–88
Bahurudeen A, Wani K, Basit M, Santhanam M (2016) Assesment of pozzolanic performance of sugarcane bagasse ash. ASCE J Mater Civ Eng 28(2)
Bai Y, Bashaer PA (2003) Influence of furnace bottom ash on properties of concrete. In: Proceedings of the institution of civil engineers. Structures and Buildings, 156(1):85–92
Batrakov VG, Kaprielov SS, Sheinfeld AV (1992) Influence of different types of silica fume having varying silica content on the microstructure and properties of concrete. ACI/CANMET Conference, Turkey, pp 943–963
Bin Q, Wu X, Tang M (1992) High strength alkali steel–iron slag binder. In: Proceedings of the 9th international congress on the chemistry of cement, vol 3. New Delhi, India, pp 291–297
Calling All Americans: We Need to Recycle More Glass. http://www.treehugger.com/clean-technology/calling-all-americans-we-need-to-recycle-more-glass.html
Cement Concrete & Aggregates Australia (CCAA) (2008) Use of recycled aggregates in construction
Characterization of Municipal Solid Waste in the United States (1992) Update, executive summary. Report No. EPA/530-S92-019, Environmental Protection Agency, Washington, D.C.
Cheriaf M, Rocha JC, Pera J (1999) Pozzolanic properties of pulverized coal combustion bottom ash. Cem Conc Res 29:1387–1391
Chinese Academy of Building Materials (1985) Physical testing methods for cements, 3rd edn. Chinese Construction Press, Beijing
Churcill VE, Amirkhanian SN (1999) Coal ash utilization in asphalt concrete mixtures. J Mater Civ Eng 11(4):295–297
Chusilp N, Chai J, Kraiwood K (2009) Utilization of bagasse ash as a pozzolanic material in concrete. Constr Build Mater 23(11):3352–3358
Clean Washington Center (1993) Using recycled glass as a construction aggregate, a summary of the glass feedstock evaluation project, Seattle
Collins RJ, Ciesielski SK (1993) Recycling and use of waste materials and byproducts in highway construction, vol 1 and 2, p 12
Comrie DC (1988) New hope for toxic waste, the world & I. Wash Times 3(8):177–178
Comrie DC, Davidovits J (1988a) Waste containment technology for management of uranium mill tailings. Paper, 117th annual meeting of the society of mining engineers, USA, Phoenix
Comrie DC, Davidovits J (1988b) Long term durability of hazardous toxic and nuclear waste disposals. Geopolymer ‘88, first European conference on soft mineralogy, vol 1. Compiegne, France, pp 125–134
Cordeiro GC, Filho RD, Tavares LM, Fairbairn EM (2008) Pozzolanic activity and filler effect of sugar cane bagasse ash in Portland cement and lime mortars. Cement Concr Compos 30(5):410–418
Cordeiro GC, Filho RD, Tavares LM, Fairbairn EM (2009a) Effect of calcination temperature on the pozzolanic activity of sugar cane bagasse ash. Constr Build Mater 23:3301–3303
Cordeiro GC, Filho RD, Tavares LM, Fairbairn EM (2009b) Ultrafine grinding of sugar cane bagasse ash for application as pozzolanic admixture in concrete. Cem Concr Res 39:110–115
Da Silveira NO, Silva MVAM, Agrizzi EJ, De Lana MF (2005) ACERITA—steel slag with reduced expansion potential. In: Proceedings of the 4th European slag conference: slag products-providing solutions for global construction and other markets. Oulu, Finland: Euroslag Publication No. 3; 20–21 June 2005, pp 145–57
Damtoft JS, Lukasik J, Herfort D, Sorrentino D, Gartner EM (2008) Sustainable development and climate change initiatives. Cem Concr Res 38(2):115–127
Davidovits J (1994) Geopolymers: inorganic polymeric new materials. J Mater Educ 16:91–139
Davidovits J, Comrie DC, Paterson JH, Ritcey DJ (1990) Geopolymeric concretes for environmental application. Concr Int 12(7):30–40
Day DE, Schaffer R (1975) Glasphalt paving handbook. In: Malisch WR, Day DE, Wixson BG (ed) Use of Domestic Waste Glass for Urban Paving: Summary Report, U.S. Environmental Protection Agency, University of Missouri-Rolla, p 53 (EPA-670/2-75-053)
Deneele D, de Larrard F, Rayssac E, Reynard J (2005) Control of basic oxygen steel slag swelling by mixing with inert material. In: Proceedings of the 4th European slag conference: slag products-providing solutions for global construction and other markets. Oulu, Finland: Euroslag Publication No. 3; 20–21 June 2005, 187–198
Dewey G et al (1993) Municipal waste combustor ash as an aggregate substitute in bituminous mixture. In: Symposium proceedings recovery and effective reuse of discarded materials and byproducts for construction of highway facilities, October 1993
DIN 1048-Part 5 (2004) Testing of hardened concrete, German Standards
Dole LR (1989) In situ immobilization: a major trend, symposium innovative waste management technologies, division of environmental chemistry. Am Chem Soc 29(1):135–137
Durability Index Testing Procedure Manual. South Africa, 2009
Dyer TD, Dhir RK (2001) Chemical reactions of glass cullet used as cement component. J Mater Civ Eng 13(6):412–417
ECOBA (2003) NCAB_workshop_Nov 23/24 2005. http://coal-ash.co.il/sadna/Presentation_Feuerborn.pdf
ECOBA (2009) Production and utilisation of CCPs in 2009 in Europe. http://www.ecoba.org
Emery JJ (1982) Slag utilization in pavement construction. In: Hotaling WW (ed) Extending aggregate resources. ASTM STP 774, pp 95–118
EN 196-1 (2005) Methods of testing cement—Part 1: determination of strength
Engineering and Environmental Aspects of Recycled Materials for Highway Construction (1993) Volume I: final report. FHWA Contract No. DTFH61-92-C00060, Federal Highway Administration, Washington D.C.
Flores I, Sobolev K, Torres LM, Valdez PL, Zarazua E, Cuellar EL (2010) Performance of cement systems with nano- SiO2 particles produced using sol-gel method. Transp Res Rec 2141:10–14
Frias M, Ernesto V, Holmer S (2011) Brazilian sugar cane bagasse ashes from the cogeneration industry as active pozzolans for cement manufacture. Cem Concr Compos 33:490–496
Ganesan K, Rajagopal M, Thangavel K (2007) Evaluation of bagasse ash as supplementary cementitious material. Cem Concr Compos 29:515–524
“Glasphalt” May Pave the Way for Worldwide Aviation in the 21st Century, March 1, 2003. http://www.sciencedaily.com/releases/1997/11/971110064723.htm
Geiger G (1994) Environmental and energy issues in the glass industry. Am Ceram Soc Bull 73(2):32–37
Georgiadis NS, Anagnostopoulos N, Sideris KK (2007) Mechanical characteristics of self-compacting concretes produced with different filler materials. In: de Schutter G, Boel V (eds) Proceedings of the 5th international RILEM symposium on self compacting concrete, Ghent, Belgium, 3–5 Sept 2007, pp 611–618
GL-93-3 (1994) Glass feedstock evaluation project: engineering suitability evaluation. evaluation of cullet as a construction aggregate. Clean Washington Center
Glukhovsky VD, Rostovskaja GS, Rumyna GV (1980) High strength slag-alkaline cements. In: 7th international congress on the chemistry of cement, vol 3, pp 164–168
Gokmenoglu Z, Sobolev K (2002) Solid waste-cement composite construction materials. In: Creating the future—second FAE international symposium, Lefke, Cyprus, pp. 153–158
Hanehara S, Tomosawa F, Kobayakawa M, Hwang K (2001) Effects of water/powder ratio, mixing ratio of fly ash, and curing temperature on pozzolanic reaction of fly ash in cement paste. Cem Concr Res 31:31–39
Heidrich C (2002) Slag—not a dirty word, Geopolymers 2002, Melbourne
Hewlett P (2004) Lea’s chemistry of cement and concrete. Elsevier Science & Technology Books, January 2004
Idir R, Cyr M, Tagnit-Hamou A (2010) Use of fine glass as ASR inhibitor in glass aggregate mortars. Constr Build Mater 24:1309–1312
Izquierdo M, Querol X (2012) Leaching behaviour of elements from coal combustion fly ash: an overview. Int J Coal Geol 94:54–66
Jaturapitakkul C, Cheerarot R (2003) Development of bottom ash as pozzolanic material. J Mater Civ Eng 15(1):48–53
Juckes LM (2003) The volume stability of modern steelmaking slags. Miner Process Extr Metall 112(3):177–197
Khatib JM, Sohl HS, Sohl HS, Chileshe N (2012) Glass powder utilisation in concrete production. Eur J Appl Sci. 4(4):173–176
Khmiri A, Samet B, Chaabouni M (2012) A cross mixture design to optimize the formulation of a ground waste glass blended cement. Constr Build Mater 28(1):680–686
Kruger RA (1990) The chemistry of fly ash and the pozzolanic reaction. Chem SA:301–303
Kumarappan N (2013) Partial replacement cement in concrete using waste glass. Int J Eng Res Technol (IJERT) 2(10):1880–1883
Kurama H, Kaya M (2008) Usage of coal combustion bottom ash in concrete mixture. Constr Build Mater 22:1922–1928
Leshchinsky A (2004) Slag sand in ready-mixed concrete. Concrete 38(3):38–39
Luxán MP, Sotolongo R, Dorrego F, Herrero E (2000) Characteristics of the slags produced in the fusion of scrap steel by electric arc furnace. Cem Concr Res 30:517–519
Making Concrete with Glass—Now Possible (13 May 2002) Ref: 2002/90. http://www.dbce.csiro.au/news/viewpress.cfm/109
Malhotra VM (1998) High- performance high-volume fly ash concrete, high performance high-strength concrete: material properties, structural behavior and field application, Perth, Australia, pp 97–122
Manso JM, Losanez M, Polanco JA, Gonzalez JJ (2005) Ladle furnace slag in construction. J Mater Civ Eng ASCE 17(5):513–518
Mayer P (2000) Technology meets the challenge of cullet processing. Glass Ind., 2
Mehta PK, Polivka M (1976) Use of highly active pozzolans for reducing expansion in concrete containing reacting aggregates, living with marginal aggregates. ASTM STP 597:25–35
Menéndez E, de Frutos J (2011) Equivalences between electrical measurement and X-ray diffraction in the formation of crystalline phases of the cement pastes. Bol Soc Esp Cer Vid 50:225–234
Menéndez E, Álvaro AM, Argiz C, Parra JL, Moragues A (2013) Characterization of bottom ashes from coal pulverized power plants to determine its potential feasibility. Bol Soc Esp Cer Vid 52(6):296–304. https://doi.org/10.3989/cyv.372013
Menéndez E, Álvaro AM, Hernández MT, Parra JL (2014a) New methodology for assessing the environmental burden of cement mortars with partial replacement of coal bottom ash and fly ash. J Env Man 133(1):275–283
Menéndez E, Álvaro AM, Andrade C (2014b) Evolution of hydration of cements with coal bottom and fly ash by non-destructive techniques and porosimetry. In: Proceedings of the international conference on durability of building materials and components. Sao Paulo, Brasil, 2–5 Sept 2014
Menéndez E, de Frutos J, Álvaro AM (2014c) Application of the electrical characterization to study the phases of hydrated cement with addictions of ashes from the power plants. Bol Soc Esp Cer Vid 53(1):32–40
Menéndez E, Argiz C, Moragues A, Sanjuan MA (2015a) Coal bottom ash studies as new cement constituents. In: Proceedings of the international conference on cement and concrete science and technology. Beijing, China, 13–16 Oct 2015
Menéndez E, Argiz C, Sanjuan MA, Ruiz SE (2015b) Durable behaviour of cements with bottom ash and fly ash. In: International conference on sustainable structural concrete. La Plata, Argentina, 15–18 Sept 2015
Meyer C (2003) Glass concrete. Concr Int 25(6):55–58
Miller RH, Collins RJ (1976) Waste materials as potential replacements for highway aggregates. NCHRP-166, Transaction of the Research Board
Montakarntiwong K, Chusilp N, Tangchirapat W, Jaturapitakkul C (2013) Strength and heat evolution of concretes containing bagasse ash from thermal power plants in sugar industry. Mater Design 49:414–420
Motz H, Geiseler J (2001) Products of steel slags an opportunity to save natural resources. Waste Manag 21(3):285–293
Muhmood L, Vitta S, Venkateswaran D (2009) Cementitious and pozzolanic behavior of electric arc furnace steel slags. Cem Concr Res 39:102–109
Municipal Solid Waste Generation, Recycling, and Disposal in the United States: Facts and Figures for 2012
Naik TR, Kraus RN (1999) Use of glass cullet as aggregates in flowable concrete with fly ash, CBU (CBU-1999-03)
Nash PT, Jayawickrama P et al (1995) Use of glass cullet in roadway construction, FHWA-TCEQ (0-1331)
National Research Council - Strategic Highway Research Program, Eliminating or Minimizing Alkali-Silica Reactivity, May 1993 (SHRP-C-343)
NCAB_workshop_Nov. 23/24 (2005) http://coalash.co.il/sadna/Presentation_Feuerborn.pdf
Papayianni I, Anastasiou E (2006) Optimization of LFS for use as a supplementary cementing material, In: Konsta-Gdoutos MS (ed) Measuring, monitoring and modeling concrete properties, Alexandroupoli, Greece, pp 411–417
Papayianni I, Anastasiou E (2010) Production of high strength concrete using high volume of industrial by-products. Constr Build Mater 24:1412–1417
Papayianni I, Anastasiou E (2012) Effect of granulometry on cementitious properties of ladle furnace slag. Cement Concr Compos 34:400–407
Pasetto M (1993) Cement stabilization of urban solid waste slags and ashes in road base and subbase layers. In: Symposium proceedings—recovery and effective reuse of discarded materials and byproducts for construction of highway facilities, October 1993
Pera J, Coutaz L, Ambroise J, Chababbet M (1997) Use of incinerator bottom ash in concrete. Cem Concr Res 27(1):1–5
Purdon AO (1940) The action of alkalis on blast furnace slag. J Soc Chem Ind 59:191–202
Quero VGJ, Martinez FML, Garcia PM, Tiburcio CG, Nava JCG (2013) Influence of sugar-cane bagasse ash and fly ash on the rheological behaviour of cement pastes and mortars. Constr Build Mater 40:691–701
Ramachandran VS (1995a) Concrete admixtures handbook, 2nd edn. Noyes Publications, New Jersey
Ramachandran VS, Feldman RF, Beaudoin JJ (1981) Concrete science: treatise on current research. Heyden & Son Ltd, London
Ramirez T (1992) Steel slag aggregate in bituminous mixtures-final report, Pennsylvania Department of Transportation
Ramme BW, Lingle JW, Naik TR (1998) Coal combustion products utilization in Wisconsin—an environmental approach. In: Proceedings of the three-day CANMET/ACI International Symposium on Sustainable Development of the Cement and Concrete Industry. Ottawa, Canada, 21–23 Oct, pp 349–383
Recycled Glass in Portland Cement Concrete (March 1, 2003) http://www.cwc.org/gl_bp/gbp4-0501.htm
Roads and Bridges (1992) Fly ash sets standard for recycled material use. pp 50–56
Robinson HL (2000) The utilization of blastfurnace and steel making slags as aggregates for construction. In: Proceedings of the 11th extractive industry geology conference 2000, 36th forum on the geology of industrial minerals, industrial minerals and extractive industry geology, The Geological Society of London, pp 327–330
Rodriguez D (1995) Application of differential grinding for fine cullet production and contaminant removal. Ceram Eng Sci Proc 16(2):96–100
Rodriguez A, Manso JM, Aragon A, Gonzalez JJ (2009) Strength and workability of masonry mortars manufactured with ladle furnace slag. Resour Conserv Recy 53:645–651
Royak SM, Royak GS (1983) Special cements, 2nd edn. Moscow, Stroyizdat, pp 88–109
Sanjuan MA, Menéndez E (2010) Experimental analysis of pozzolanic properties of pulverized coal combustion bottom ash. In: Proceedings of the international congress on the chemistry of cement, Madrid, Spain, 3–8 July
Sanjuán MA, Zaragoza A (2013) Chinese standards about specifications of cements. Cemento y Hormigón 957:8–17
Sanjuan MA, Menéndez E, Argiz C, Moragues A (2016) Coal bottom ash feasibility study to be a new Portland cement constituent. In: International RILEM conference materials systems and structures in civil engineering, Lyngby, Denmark, 22–24 Aug
Sanjuan MA, Argiz C, Menéndez E, Moragues A (2016) Alkali-aggregates reaction resistance of mortars with bottom ash from coal power stations. Rehabend. Burgos, Spain, May 24–27 2016
Saylak D et al (1993) Applications for FGD byproduct gypsum. In: Symposium proceedings recovery and effective reuse of discarded materials and byproducts for construction of highway facilities, October 1993
Schoenberger H (2001) Final draft: best available techniques reference document on the production of iron and steel. Publications of EC: European Commission, Joint Research Centre, IPTS, European IPPC Bureau
Schroeder Robin L (1994) The use of recycled materials in highway construction. Publ Roads 58(2):32–41
Scrivener KL, Kirkpatrick RJ (2008) Innovation in use and research on cementitious material. Cem Concr Res 38:128–136
Shao Y, Lefort T, Moras S, Rodriguez D (1998) Waste glass: a possible pozzolanic material for concrete. In: International Symposium on Sustainable Development of the Cement and Concrete Industry, CANMET/ACI, Ottawa, 1998, pp 317–326
Shayan A, Xu A (2006) Performance of glass powder as a pozzolanic material in concrete: a field trial on concrete slabs. Cem Concr Res J 36:457–468
Shi C (2004) Steel slag—its production, processing and cementitious properties. J Mater Civ Eng ASCE 16(3):230–236
Shi C, Hu S (2003) Cementitious properties of ladle slag fines under autoclave curing conditions. Cem Concr Res 33:1851–1856
Shin CJ, Sonntag V (1994) Using recycled glass as construction aggregate, Transportation Research Board, National Research Council (No. 1437)
SIA 162/1-E (2003) Non-Destructive Site Air-Permeability Test. Concrete Construction – Complementary Specifications. Swiss Standard Method
Siddique R (2010) Utilization of coal combustion by-products in sustainable construction materials. Resour Conserv Recycl 54(12):1060–1066
Sideris KK (2014) Long term durability properties of self-compacting concrete mixtures produced with ladle furnace slag. Internal report of the laboratory of building materials, Democritus University of Thrace, p 75 (in Greek)
Singh NB, Singh VD, Rai S (2000) Hydration of bagasse ash-blended Portland cement. Cem Concr Res 30:1485–1488
Sobolev K (1993) High- strength concrete with low cement factor. PhD dissertation, Chemical Admixtures Lab, Research Institute of Concrete and Reinforced Concrete, Moscow, Russia
Sobolev K (2003a) Effect of complex admixtures on cement properties and the development of a test procedure for the evaluation of high-strength cements. Adv Cem Res 15(1):67–76
Sobolev K (2003b) Sustainable development of the cement industry and blended cements to meet ecological challenges. Sci World J 3:308–318
Sobolev K (2003) Recycling of waste glass in eco-cement. The American Ceramic Society, pp 9501–9507
Sobolev K (2004) The development of a new method for the proportioning of high-performance concrete mixtures. Cem Concr Compos 26(7):901–907
Sobolev K (2005) Mechano-chemical modification of cement with high volumes of blast furnace slag. Cement Concr Compos 27(7–8):848–853
Sobolev K, Arikan M (2002) High-volume mineral additive ECO-cement. Am Ceram Soc Bull 81(1):39–43
Sobolev K, Soboleva S (1999) High performance cement: solution for next millennium. Mater Technol 14(4):191–193
Sobolev K, Yeginobali A (2005) The development of high-strength mortars with improved thermal and acid resistance. Cem Concr Res 35(3):578–583
Sobolev K, Türker P, Yeginobali A, Erdogan B (2004) Microstructure and properties of eco-cement containing waste glass. In: International Conference on Sustainable Waste Management and Recycling: Challenges and Opportunities, UK
Sobolev K, Türker P, Soboleva S, Iscioglu G (2007) Utilization of waste glass in eco-cement: properties and microstructural observations. Waste Manag 27(7):971–976
Sobolev K, Moini M, Muzenski S, Pradoto R, Kozhukhova M, Flores-Vivian I, Cramer S, Pham L, Faheem A (2015) Laboratory study of optimized concrete pavement mixtures, Report WHRP 0092-13-04. http://wisconsindot.gov/documents2/research/13-04-final-report.pdf
Somna R, Jaturapitakkul C, Rattanachu P, Chalee W (2012) Effect of ground bagasse ash on mechanical and durability properties of recycled aggregate concrete. Mater Des 36:597–603
Stewart G (1986) Cullet and glass container manufacture. Resource Recycling, 2
Swamy RN (1986) Cement replacement materials. Surrey University Press, Surrey
Tang M (1973) An investigation on mineral composition of steel slag for cement production. Research Rep., Nanjing Institute of Chemical Technology, Nanjing, China
The Statistics Portal. U.S. glass and glass product manufacturing gross output from 1998 to 2014. http://www.statista.com/statistics/194278/us-glass-manufacturing-gross-output-since-1998/
Togawa K et al (1992) Study on the effects of blast- furnace slag on properties of no-slump concrete mixtures. In: Proceedings of the fourth international conference on fly ash, silica fume, slag and natural pozzolans in concrete, Istanbul, Turkey
Tossavainen M, Engstrom F, Yang Q, Menad N, Lidstrom Larsson M, Bjorkman B (2007a) Characteristics of steel slag under different cooling conditions. Waste Manage 27:1335–1344
Tsakiridis PE, Papadimitriou GD, Tsivilis S, Koroneos C (2008) Utilization of steel slag for Portland cement clinker production. J Hazard Mater 152(2):805–811
Typical Contaminants in Recycled Glass (1 March, 2003) http://www.cwc.org/gl_bp/gbp1-0201.htm
U.S. Department of Energy (2002) Glass industry of the future—energy and environmental profile of the U.S. Glass Industry, pp 1–23
U.S. Environmental Protection Agency (1992) Markets for recovered glass, pp 1–15 (EPA-530-SW-90-071A)
U.S. Environmental Protection Agency (2002) Characterization of municipal solid waste in the United States: 2000 Update, pp 7–41
User Guidelines for By-products and Secondary Use Materials in Pavement Construction, FHWA-RD-97-148 (2008)
Van Jaarsveld JGS, Van Deventer JSJ, Lorenzen L (1995) Factors affecting the immobilization of metals in geopolymerised fly ash. Research report, Department of Chemical Engineering, University of Stellenbosch, South Africa
Gunalaan V, Kanapathy SG (2013) Performance of using waste glass powder in concrete as replacement of cement. Am J Eng Res (AJER). 2(12):175–181
Ward CR, French D (2006) Determination of glass content and estimation of glass composition in fly ash using quantitative X-ray diffractometry. Fuel 85(16):2268–2277. Special Issue: The 2005 World of Coal Ash Conference
Wintenborn JL, Green JJ (1998) Steelmaking slag: a safe and valuable product. The steel slag coalition
Wu Xuequan, Hong Zhu, Xinkai Hou, Husen Li (1999) Study on steel slag and fly ash composite Portland cement. Cem Concr Res 29(7):1103–1106
Xie Z, Xiang W, Xi Y (2003) ASR potentials of glass aggregates in water-glass activated fly ash and portland cement mortars. J Mater Civil Eng. 15(1):67–74
Yildirim IZ, Prezzi M (2011) Chemical, mineralogical, and morphological properties of steel slag. Advances in civil engineering-special issue of the use of recyclable materials in sustainable civil engineering applications (RMSCE), vol 2011, Article ID 463638, 13 p, 2011
Additional Literature
Fily-Paré I, Jolin M (2013) The use of recycled glass in shotcrete. In: Proceedings in the International Conference Shotcrete Fall, pp 14–69
Khan SU, Nuruddin MF, Ayub T, Shafiq N (2014) Effects of different mineral admixtures on the properties of fresh concrete. Sci World J 2014 (2014), Article ID 986567, 11 p. doi:https://doi.org/10.1155/2014/986567
Pascual AB, Tognonvi MT, Tagnit-Hamou A (2014) Waste glass powder-based alkali-activated mortar IJRET. Int J Res Eng Technol 3(13):2321–7308
Chapter 3 Fly Ash, Slag, Silica Fume, and Natural Pozzolans Design and Control of Concrete Mixtures EB001
Jones EE, Murrie SJ (1980) Utilization of steel plant slag products in Australia. Excerpt from a paper presented at the 1st Process Technology Conference, Washington D.C.
Proctor DM, Fehling KA, Shay EC, Wittenborn JL, Green JJ, Avent C, Bigham RD, Connolly M, Lee B, Shepker TO, Zak MA (2000) Recycled materials in European highway environments: uses, technologies, and policies. FHWA-PL-00-025. Physical and Chemical Characteristics of Blast Furnace, Basic Oxygen Furnace, and Electric Arc Furnace Steel Industry Slags. Environmental Science & Technology. 34(8):1576–1582
Recycled Materials in European Highway Environments: Uses, Technologies, and Policies, FHWA-PL-00-025, 2000
Proctor DM, Fehling KA, Shay EC, Wittenborn JL, Green JJ, Avent C, Bigham RD, Connolly M, Lee B, Shepker TO, Zak MA (2000b) Physical and chemical characteristics of blast furnace, basic oxygen furnace, and electric arc furnace steel industry slags. Environ Sci Technol 34(8):1576–1582
Soil Screening Guidance: Technical Background Document; EPA/ 540/R-95/128; U.S. Environmental Protection Agency, Office of Solid Waste and Emergency Response, Office of Emergency and Remedial Response; Hazardous Site Control Division; U.S. Government Printing Office: Washington, DC, 1996
McCarthy DF (1993) Essentials of soil mechanics and foundations, 4th edn. Regents/Prentice Hall, Englewood Cliffs, NJ, p 54
EPA TCLP: Toxicity Characteristic Leaching Procedure
ASTM C151/ C151 M - 09 “Standard Test Method for Autoclave Expansion of Hydraulic Cement”
EN 1744-1:2009, “Tests for chemical properties of aggregates: chemical analysis.”
Barra M, Ramonich EV, Munoz MA (2001) Stabilization of soils with steel slag and cement for application in rural and low traffic roads. In: Proceedings of the beneficial use of recycled materials in transportation application. RMCR University of Durham, Arlington, Va., Nov. 13–15, pp 423–432
Geiseler J (1996) Use of steelworks slag in Europe. Waste Manag 16(1–3):59–63
Murphy JN, Meadowcroft TR, Barr PV (1997) Enhancement of the cementitious properties of steelmaking slag. Can Metall Q 36(5):315–331
Nicolae M, Vîlciu I, Zǎman F (2007) X-ray diffraction analysis of steel slag and blast furnace slag viewing their use for road construction. UPB Scientific Bulletin Series B 69(2):99–108
Qian GR, Sun DD, Tay JH, Lai ZY (2002) Hydrothermal reaction of autoclave stability of Mg bearing RO phase in steel slag. Br Ceram Trans 101(4):159–164
Reddy AS, Pradhan RK, Chandra S (2006) Utilization of basic oxygen furnace (BOF) slag in the production of a hydraulic cement binder. Int J Miner Process 79(2):98–105
Tossavainen M, Engstrom F, Yang Q, Menad N, Larsson ML, Bjorkman B (2007b) Characteristics of steel slag under different cooling conditions. Waste Manag 27(10):1335–1344
Wachsmuth F, Geiseler J, Fix W, Koch K, Schwerdtfeger K (1981) Contribution to the structure of BOF-slags and its influence on their volume stability. Can Metall Q 20(3):279–284
Pascoe RD, Barley RW, Child PR (2001) Autogenous grinding of glass cullet in a stirred mill. In: Dhir RK, Limbachiya MC, Dyer TD (ed) Recycling and reuse of glass cullet. Thomas Telford Ltd., London, pp 15–29
Evaluation of Crushed Recycled Glass as a Filtration Medium in Slow Rate Sand Filtration, Clean Washington Center, 1995
Marikunte S, Shah SP (1993) Engineering of cement based composites. In: Proceedings of the international RILEM workshop—concrete technology: new trends, industrial applications. E&FN Spon, London, pp 83–102
Shah SP (1993) Recent trends in the science and technology of concrete. In: Proceedings of the international RILEM workshop—concrete technology: new trends, industrial applications. E&FN Spon, London, pp 1–18
Batrakov VG (1990) Modified concrete. Stroyizdat, Moscow, pp 6–37 (in Russian)
Ramachandran VS (1995b) Concrete admixtures handbook. Noyes Publications, New Jersey
Malhotra VM (1998) High- performance high- volume fly ash concrete. In: Rangan BV, Patnaik AK (ed) Proceedings of the international conference on high performance high- strength concrete: material properties, structural behavior and field application, Curtin University, Perth, 1998, pp 97–122
Sobolev K, Soboleva S (1998) Complex admixture and method of cement based materials production. International PCT Application PCT/TR98/00008, Vienna (WO98/54108)
Al-Manaseer AA, Aquino EB, Kumbardi H (1999) Properties of concrete containing ultimax rapid-setting hydraulic cements. ACI Mater J 96(5):529–535
European Committee for Standardization. European Standard Specification for Cement, European Standard, 1994, EN 197-1
TSE. Rilem - Cembureau Standard Sand, TSE, Ankara, 1989, TS 819
European Committee for Standardization (1994) Test method for determining compressive strength of cement mortar. European Standard, 1994, EN 196
American Society for Testing and Materials. Compressive Strength of Hydraulic Cement Mortars (Using 2-in or 50-mm Cube Specimens), Annual Book of ASTM Standards, 1999, ASTM C109
American Society for Testing and Materials. Compressive Strength of Hydraulic Cement Mortars (Using Portions of Prisms Broken in Flexure), Annual Book of ASTM Standards, 1999, ASTM C349
Argiz C, Menéndez E, Sanjuán MA (2013) Effect of mixes made of coal bottom ash and fly ash on the mechanical strength and porosity of Portland cement. Mat. Const. 63(309):49–64. https://doi.org/10.3989/mc.2013.03911
EN 196 – 6, 2010. Methods of testing cement - Part 6: Determination of fineness
Vom Berg W, Feuerborn HJ (2007) Produkte aus der kohleverbrennung in Europa – wertvolle robstoffe für die bauindustrie
ETSICCP (UPM) (2014) Study of the use of bottom ash of the coal power plants as addiction of Portland cements. Comparative analysis with the fly ash, Ph.D. Dissertation, Madrid, Spain
Menéndez E, Frutos Jd, Andrade C (2009) Analysis non-destructive of the degradation state in mortars under frost-thawing cycles. Boletín de la Sociedad Española de Cerámica y Vidrio. 48(5):223–230
EN 196 – 5, 2011, Methods of testing cement. Part 5: Pozzolanicity test for pozzolanic cement
AASHTO Standards: M 147 Materials for Aggregate and Soil-Aggregate Subbase, Base and Surface
U.S. EPA, Characterization of Municipal Solid Waste in the United States: 1990 Update, June 1990, (USEPA 1990) pp 12, 15
W.S. Department of Commerce, U.S. Industrial Outlook 1990
Predicasts, Inc., Predicasts’ Basebook, 1989, p 500
U.S. Department of Commerce, Bureau of the Census, 1987 Census of Manufactures, Industry Series: Glass Products
US. EPA, Characterization of Municipal Solid Waste in the United States, 1960 to 2000 (update 1988), March 30,1988, pp 21, 22
U.S. Department of Commerce, Bureau of the Census, 1987 Census of Manufactures, Industry Series: Glass Products. Data from the 1987 Census of Manufactures do not contain revised estimates of cullet use, since a large fraction of the total had to be estimated
California Division of Recycling, Biannual Report on Redemption and Recycling Rates: July 1, 1988 to December 31, 1988, pp 5, 8
Darlene Snow and Ballina Edwards, Glass Recycling: Opportunities and Constraints, August 1985
Nash PT, Jayawickrama PW, Tock RW, Senadheera SP, Viswanathan K, Woolverton B (1995) Use of recycled glass cullet in roadway construction—Final Report. Final Report 1331-2F, College of Engineering, Texas Tech University, Lubbock, Texas, August 1995
U.S. Environmental Protection Agency, Residential Collection of Household End-of-Life Electrical and Electronic Equipment: Pilot Collection Project (EPA-901-R-98-002), prepared by Northeast Resource Recovery Association for the Common-Sense Initiative – Computer and Electronics Sector, Region I, Boston, MA, February 1998
US Environmental Protection Agency, San Jose Computer Collection and Recycling Pilot: Draft, prepared by Vista Environmental for the Common-Sense Initiative—Computer and Electronics Sector, Region IX, San Francisco, CA, February 1998
Union County Utilities Authority, Union County Demanufacturing Program - Semi-Annual Report, Union County, NJ, October 1, 1997-March 31, 1998
Bureau of the Census, Census of Population and Housing, 1990, Washington, DC, 1992
U.S. Environmental Protection Agency, Household Hazardous Waste Management: A Manual for One-Day Community Collection Programs (EPA-530-R-92-026), prepared by the Waste Watch Center for the Office of Solid Waste and Emergency Response, Washington, DC, August 1993
United States Environmental Protection Agency, Full Cost Accounting for Municipal Solid Waste Management: A Handbook (EPA 530-R-95-041), Office of Solid Waste and Emergency Response, Washington, DC, September 1997
European Commission, Recovery of Waste from Electrical and Electronic Equipment: Economic and Environmental Impacts (AEAT/2004 Issue 1), prepared by AEA Technology for the European Commission DGXI, Oxfordshire, UK, July 1997
Inc Keep America Beautiful (1994) The Role of recycling in integrated solid waste management to the year 2000. prepared by Franklin Associates, Stamford, CT
Dana Duxbury & Associates, Proceedings of the Fifth National Conference on Household Hazardous Waste Management, Andover, MA, November, 1990
Veldhuizen H, Sippel B (1994) Mining discarded electronics. Industry and Environment, vol 17, No. 3, United Nations Environment Program, July–Sept 1994
Woods R (1994) Handling difficult materials. Waste Age
Cutter Information Corp., “Europe Moves Toward Integrated Product Policy”, Product Stewardship Advisor, September 4, 1998
Paddock T (1989) The costs and benefits of household hazardous waste collection programs. Academy of Natural Sciences
Major Constraints on Glass Waste Recovery and Recycling
http://www.epd.gov.hk/epd/english/environmentinhk/waste/guide_ref/guide_factsheets06.html
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 RILEM
About this chapter
Cite this chapter
Sobolev, K., Kozhukhova, M., Sideris, K., Menéndez, E., Santhanam, M. (2018). Alternative Supplementary Cementitious Materials. In: De Belie, N., Soutsos, M., Gruyaert, E. (eds) Properties of Fresh and Hardened Concrete Containing Supplementary Cementitious Materials. RILEM State-of-the-Art Reports, vol 25. Springer, Cham. https://doi.org/10.1007/978-3-319-70606-1_7
Download citation
DOI: https://doi.org/10.1007/978-3-319-70606-1_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-70605-4
Online ISBN: 978-3-319-70606-1
eBook Packages: EngineeringEngineering (R0)