Abstract
This paper concerns the design and manufacture of medical devices, such as lower limb prosthesis, integrating low cost industrial technologies. In particular, it focuses the attention on the custom-fit component of a lower limb prosthesis, i.e., the socket, that is the interface with the residual limb. The considered process starts from the 3D reconstruction of patients’ limb and ends with the manufacture of the socket with a 3D printer using a multi-material approach. The process counts three steps: 3D modeling, testing (both experimental and numerical) and manufacturing. For each step adopted solutions and tools are described. Finally, conclusions are drawn mainly concerning the challenge of multi-material 3D printing of the socket.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Colombo, G., Regazzoni, D., Rizzi, C.: Ergonomic design through virtual humans. Comput. Aided Des. Appl. 10(5), 745–755 (2013). doi:10.3722/cadaps.2013.745-755
Colombo, G., Facoetti, G., Rizzi, C., Vitali, A.: Low cost hand-tracking devices to design customized medical devices. In: Shumaker, R., Lackey, S. (eds.) VAMR 2015. LNCS, vol. 9179, pp. 351–360. Springer, Cham (2015). doi:10.1007/978-3-319-21067-4_36
WasenmĂĽller, O., Peters, J.C., Golyanik, V., Stricker, D.: Precise and automatic anthropometric measurement extraction using template registration. In: 6th International Conference on 3D Body Scanning Technologies, Lugano (2015). doi:10.15221/15.155
Salmi, M.: Medical applications of additive manufacturing in surgery and dental care. Ph.D. thesis, Aalto University, Helsinki (2013)
Wang, C.C.L.: CAD tools in fashion/garment design. Comput. Aided Des. Appl. 1(1–4), 53–62 (2004). doi:10.1080/16864360.2004.10738243
Wang, C.H.; Chiang, Y.C., Wang, M.J.: Evaluation of an augmented reality embedded on-line shopping system. In: 6th International Conference on Applied Human Factors and Ergonomics, vol. 3, pp. 5624–5630. doi:10.1016/j.promfg.2015.07.766
Fontana, M., Rizzi, C., Cugini, U.: A CAD-oriented cloth simulation system with stable and efficient ODE solution. Comput. Graph. (Pergamon). 30(3), 391–407 (2006). doi:10.1016/j.cag.2006.02.002
Comotti, C., Regazzoni, D., Rizzi, C., Vitali, A.: Multi-material design and 3D printing method of lower limb prosthetic sockets. In: Proceedings of the 3rd 2015 Workshop on ICTs for improving Patients Rehabilitation Research Techniques, pp. 42–45. ACM (2015). doi:10.1145/2838944.2838955
Singh, U.: Role of cad-cam technology in prosthetics and orthotics. In: Essentials of Prosthetics and Orthotics, p. 86 (2013)
Buzzi, M., Colombo, G., Facoetti, G., Gabbiadini, S., Rizzi, C.: 3D modelling and knowledge: tools to automate prosthesis development process. Int. J. Interact. Des. Manuf. 6, 41–53 (2012). doi:10.1007/s12008-011-0137-5
Colombo, G., Facoetti, G., Rizzi, C., Vitali, A., Zanello, A.: Automatic 3D reconstruction of transfemoral residual limb from MRI images. In: Duffy, V.G. (ed.) DHM 2013. LNCS, vol. 8026, pp. 324–332. Springer, Heidelberg (2013). doi:10.1007/978-3-642-39182-8_38
Polliack, A.A., Sieh, R.C., Craig, D.D., Landsberger, S., McNeil, D.R., Ayyappa, E.: Scientific validation of two commercial pressure sensor systems for prosthetic socket fit. Prosthet. Orthot. Int. 24(1), 63–73 (2000). doi:10.1080/03093640008726523
Skanect software. http://skanect.occipital.com/
Sengeh, D., Herr, H.: A variable-impedance prosthetic socket for a transtibial amputee designed from magnetic resonance imaging data. J. Prosthet. Orthotics 25(3), 129–137 (2013). doi:10.1097/JPO.0b013e31829be19c
Lee, W.C., Zhang, M., Mak, A.F.: Regional differences in pain threshold and tolerance of the transtibial residual limb: including the effects of age and interface material. Arch. Phys. Med. Rehabil. 86(4), 641–649 (2005)
Dumbleton, T., Buis, A.W.P., Mcfadyen, A., Mchugh, B.F., Mckay, G., Murray, K.D., Sexton, S.: Dynamic interface pressure distributions of two transtibial prosthetic socket concepts. J. Rehabil. Res. Dev. 46(3), 405–415 (2009)
Aherwar, A., Singh, A., Patnaik, A.: A review paper on rapid prototyping and rapid tooling techniques for fabrication of prosthetic socket, pp. 345–353 (2014)
FDM by Stratasys. http://www.stratasys.com/3d-printers/technologies/fdm-technology
FFF by RepRap. http://reprap.org/wiki/Fused_filament_fabrication
Shi, Z., Peng, Y., Wei, W.: Recent advance on fused deposition modeling. Recent Patents Mech. Eng. 7(2), 122–130 (2014). doi:10.2174/2212797607666140515231742
Rodriguez, J., Thomas, J.P., Renaud, J.E.: Mechanical behavior of acrylonitrile butadiene styrene (abs) fused deposition materials. Experimental investigation. Rapid Prototyping J. 7(3), 148–158 (2001). doi:10.1108/13552540110395547
Schumacher, C., Bickel, B., Rys, J., Marschner, S., Daraio, C., Gross, M.: Microstructures to control elasticity in 3D printing. ACM Trans. Graph. 34(4), Article 136 (2015). doi:10.1145/2766926
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this paper
Cite this paper
Comotti, C., Regazzoni, D., Rizzi, C., Vitali, A. (2017). Pressure Data and Multi-material Approach to Design Prosthesis. In: Fardoun, H., R. Penichet, V., Alghazzawi, D., De la Guia, M. (eds) ICTs for Improving Patients Rehabilitation Research Techniques. REHAB 2015. Communications in Computer and Information Science, vol 665. Springer, Cham. https://doi.org/10.1007/978-3-319-69694-2_4
Download citation
DOI: https://doi.org/10.1007/978-3-319-69694-2_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-69693-5
Online ISBN: 978-3-319-69694-2
eBook Packages: Computer ScienceComputer Science (R0)