Abstract
The issues of improving the design of adsorption dryers for compressed air are considered, by using the energy of microwave radiation in the process of regeneration of the adsorbent. The expediency of moving the adsorbent layer relative to the source of microwave radiation during the desorption is proved in order to achieve better uniformity of heating of the desorbed material. The expediency of using software products using the finite element method is shown with the aim of modeling the heating process of the adsorbent in the cavity of the adsorption column.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
XuMuK/Lecture course on heating engineering/Chapter 17.1. Volumetric compressor—URL: http://www.xumuk.ru/teplotehnika/054.html (date of request: 24.03.2017)
Bankov, S.E., Kurushin, A.A., Razevig, V.D.: Analiz i optimizatsiya trehmernyih SVCh struktur s pomoschyu HFSS. Red. d.t.n., prof. Bankova S.E.—M., SOLON-Press, 208 s (2008)
HFSS—High Frequency Structure Simulation. Manuals, Ansoft. URL: www.ansoft.com (date of request: 10.02.2017) (2004)
Balanis, K.A.: Antenna Theory: Analysis and Design, 942, 2nd edn. Wiley, USA (1997)
Auerbach, S.M., Carrado, K.A., Dutta, P.K.: Handbook of Zeolite Science and Technology. Marcel Dekker Inc, NY (2003)
Farooq, S., Ruthven, D.M.: Heat effects in adsorption column dynamics. 1. Comparison of one and two-dimensional models. Ind. Eng. Chem. Res. 29(6), 1076–1084 (1990)
Acknowledgements
The authors of this study would like to thank to National Aerospace University “KhAI” for their technical support and to prof. Gennadiy I. Kostuyk for his valuable recommendations.
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Dobrotvorskiy, S.S., Dobrovolska, L.G., Aleksenko, B.A. (2018). Computer Simulation of the Process of Regenerating the Adsorbent Using Microwave Radiation in Compressed Air Dryers. In: Hamrol, A., Ciszak, O., Legutko, S., Jurczyk, M. (eds) Advances in Manufacturing. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-68619-6_49
Download citation
DOI: https://doi.org/10.1007/978-3-319-68619-6_49
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-68618-9
Online ISBN: 978-3-319-68619-6
eBook Packages: EngineeringEngineering (R0)