Abstract
Emotional aspects and designers’ motivations in Design For Additive Manufacturing are rarely studied. Still, as they can influence creative behaviors, it is worth of interest to draw some bases for a relation between designers’ motivations and the field of Additive Manufacturing. This paper aims at identifying the motivations that push designers to deal with AM in their practice. We have highlighted that they experience some extrinsic motivations: technical improvements, economics and social environments pressures. We also noticed that creative designers, apart from AM, usually experience some intrinsic motivations and, moreover, that it exists an ideal state to generate creative concepts: the Flow. To support creative designers in DFAM in reaching the Flow, we then identified 4 key levers through the potential of AM: the newness of AM processes, the needed skill of 3D modelling, the investigation of new shape grammars and finally the opportunity of embodying concepts into physical objects. To benefit from this potential, we assume that designers’ intrinsic motivations should be supported: we identified three required conditions. The first one is the use of a proper vocabulary i.e. the expression Additive Manufacturing instead of 3D Printing. The second one is the development of a design process which integrates a creative approach. The third condition is the use of AM objects as experience triggers during creative sessions to arise positive emotions.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
3D Systems (1989) Good Morning America. [cited 2013 January 2013]; Available from: https://www.youtube.com/watch?v=9H1CUQ5U4Xc
AFNOR, NF E 67-001 (2011) Union de Normalisation de la Mécanique (French union for standardization in mechanics)
Alimardani M, Toyserkani E, Huissoon JP (2007) A 3D dynamic numerical approach for temperature and thermal stress distributions in multilayer laser Solid Freeform Fabrication process. Opt Lasers Eng 45:1115–1130
Ansburg PI, Hill K (2003) Creative and analytic thinkers differ in their use of attentional resources. Pers Individ Differ 34(7):1141–1152
Bonnardel N, Marmèche E (2005) Towards supporting evocation processes in creative design: a cognitive approach. Int J Hum-Comput Stud 63:422–435
Bouchard C, Omhover JF, Kim J (2014) Kansei information processes in early design, design cognition and computation. In: Fukuda S (ed) Emotional engineering, vol. 3. Springer International Publishing
Bourell D, Beaman J, Leu M, Rosen D (2009) A brief history of additive manufacturing and the 2009 roadmap for additive manufacturing: looking back and looking ahead. In RapidTech conference 2009
Boyard N, Rivette M, Christmann O, Richir S (2013) A design methodology for parts using additive manufacturing. In: 6th international conference on advanced research in virtual and rapid prototyping. Leira, Portugal pp 399–404
Burton MJ (2005) Design for rapid manufacture: developping an appropriate knowledge transfer tool for industrial designers. PhD thesis at Faculty of Social Sciences and Humanities department of Design and Technology, Loughborough
Chu C, Graf G, Rosen D (2008) Design for additive manufacturing of cellular structures. Comput. Aided Des Appl 5:686–696
Cruz V, Gaudron N (2010) Open-ended objects: a tool for brainstorming. Designing Interactive Systems conference Aarhus, Denmark, August 16–20th pp 85–88
Csikszentmihalyi M, Robinson RE (1991) The art of seeing: an interpretation of the aesthetic encounter. J. Paul Getty Museum (eds)
Doubrovski Z, Verlinden J, Geraedts J (2011) Optimal design for additive manufacturing: opportunities and challenges. In: ASME 2011 International Design Engineering Technical Conference & Computer and Information in Engineering Conference. Washington DC
Garcia R, Calantone R (2002) A critical look at technological innovation typology and innovativeness terminology: a literature review. J Prod Innov Manage 19:110–132
Goldschmidt G, Smolkov M (2006) Variances in the impact of visual stimuli on design problem solving performance. Des Stud 27:549–569
Hague R, Campbell I, Dickens P (2003) Implications on design of rapid manufacturing. J Mech Eng Sci 217:25–30
Kruth JP, Leu MC, Nakagawa T (1998) Progress in additive manufacturing and rapid prototyping. In CIRP Annals 47:525–540
Laverne F, Segonds F, Anwer N, Le Coq M (2015) Assembly based methods to support product innovation in design for additive manufacturing: an exploratory case study. J Mech Des 137(12):121701
Leandri A (2016) Panorama des formations en fabrication additive en 2016. 2016 [cited 2016 October 27th]; Training courses offer in France in 2016]. Available from: http://souspression.canalblog.com/archives/2010/10/01/34477244.html
Maheshwaraa U, Seepersad C, Bourell DL (2007) Design and freeform fabrication of deployable structures with lattice skins. Rapid Prototyping J 13(4):213–225
Maidin BS, Campbell I, Pei E (2011) Development of a design feature database to support design for additive manufacturing. Assembly Autom 32(3):235–244
Mer S, Jeantet A, Tichkiewitch S (1995) Les objets intermédiaires de la conception: modélisation et communication. Le communicationnel pour concevoir, pp. 21–41
Munguia J, Riba C, Lloveras J (2007) In the search of design for rapid manufacturing strategies to solve functional and geometrical issues for small series production. In International Conference on Engineering Design ICED’07, Paris
Ocnarescu I (2013) Aesthetic experience & innovation culture: the aesthetic experience in an R&D department through design and for innovation culture. Ph.D. thesis at Arts et Métiers Paristech
Oudeyer P-Y, Kaplan F, Hafner V (2007) Intrinsic motivation systems for autonomous mental development. IEEE Trans Evol Comput 11(2):265–286
Oxman R (2006) Theory and design in the first digital age. Des Stud 27:229–265
Pasman G (2003) Designing with precedents. Delft University of Technology (eds)
Pei E, Campbell I, Evans MA (2008) Building a common ground—the use of design representation cards for enhancing collaboration between industrial designers and engineering designers. In: Undisciplined! Design Research Society conference 16–19th July 2008
Ponche R, Hascoet JY, Kerbrat O, Mognol P (2012) A new global approach to design for additive manufacturing. Virtual Phys Prototyping 7(2):93–105
Rafi HK, Starr TL, Stucker BE (2013) A comparison of the tensile, fatigue, and fracture behavior of Ti–6Al–4V and 15-5 PH stainless steel parts made by Selective Laser Melting. Int J Adv Manuf Technol 69(5):1299–1309
Rias AL (2016) All the additive manufacturing processes: a graphic vizualisation 2016, http://strabic.fr/Impression-3d-ou-Fabrication-additive
Rias AL, Segonds F, Bouchard C, Abed S (2016) Design For Additive Manufacturing: a creative approach. In DESIGN 2016 conference, May 16–19th. Dubrovnik, Croatia pp 411–420
Rias Al, Segonds F, Bouchard C, Abed S (2017) Towards additive manufacturing of intermediate objects (AMIO) for concepts generation. Int J Interact Design Manuf (IJIDeM). doi:10.1007/s12008-017-0369-0
Rieuf V (2013) Impact of the immersive experience on Kansei during early design, in Engineering sciences. Ph.d. thesis at Ecole Nationale Supérieure d’Arts et Métiers
Rodrigue H, Rivette M (2010) An assembly-level design for additive manufacturing methodology. In: IDMME-Virtual Concept. 2010. Research in interactive design, Bordeaux
Rosen DW (2007) Design for additive manufacturing: a method to explore unexplored regions of the design space. In: 18th annual solid freeform fabrication symposium, pp. 402–415
Ryan Richard, Deci Edward (2000) Intrinsic and extrinsic motivations: classic definitions and new directions. Contemp Educ Psychol 25(1):54–67
Segonds F, Cohen G, Véron P, Peyceré J (2016) PLM and early stages collaboration in interactive design, a case study in the glass industry. Int J Interact Des Manuf (IJIDeM) 10(2):95–104
Tang Y, Hascoet JV, Zhao YF (2014) Integration of topological and functional optimization in design for additive manufacturing. In: ASME 2014 12th Biennal conference on Engineering systems. Copenhagen, Denmark
Vayre B, Vignat F, Villeneuve F (2012) Designing for additive manufacturing. In: 45th CIRP Conference on manufacturing systems
Wohlers Associates (ed) (2013) Additive manufacturing and 3D printing state of the industry. Annual worldwide progress report 2013
Yoon B, Park Y (2005) A systematic approach for identifying technology opportunities: keyword-based morphology analysis. Technol Forecast Soc Chang 72:145–160
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this chapter
Cite this chapter
Rias, Al., Bouchard, C., Segonds, F., Vayre, B., Abed, S. (2017). Design for Additive Manufacturing: Supporting Intrinsic-Motivated Creativity. In: Fukuda, S. (eds) Emotional Engineering, Vol.5. Springer, Cham. https://doi.org/10.1007/978-3-319-53195-3_8
Download citation
DOI: https://doi.org/10.1007/978-3-319-53195-3_8
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-53194-6
Online ISBN: 978-3-319-53195-3
eBook Packages: EngineeringEngineering (R0)