Abstract
Distributed fibre optic sensing (DFOS) provides breakthrough possibilities in the field of structural health monitoring (SHM) in comparison to conventional spot measurements. It allows the measurements to be registered over the entire measuring length, not only in one point of the structure. That is why this technology is becoming more and more attractive for geotechnics and civil engineering applications, providing both technical and economic benefits. However, to utilize all advantages of distributed sensing it is necessary to apply appropriate sensors, which will be able to accurately reflect the real structural behaviour. This paper discusses in situ application of unique (patented) composite DFOS displacements sensors (3DSensors), which were embedded into the ground layers and compacted around the footing. The research was conducted to observe the potential slip plane generated during the vertical pulling of the footing out of the ground. Distributed measurements were performed to obtain vertical displacement profiles around the footing within the selected ground layers with a spatial resolution of 1 cm. Finally, special visualization of ground deformation in 3D space was performed to analyze in detail the physical changes between the footing and the surrounding ground. No other techniques are currently able to obtain such information, as their application inside the ground layers would disturb its behaviour. The operational rules of displacement DFOS sensor, way of installation, course of the study as well as the exemplary results are discussed hereafter.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Balageas D, Fritzen CP, Güemes A (2006) Structural health monitoring. Wiley-ISTE
Dunnicliff J (1993) Geotechnical instrumentation for monitoring field performance. Wiley-Interscience
Benjamin JR, Cornell CA (1970) Probability. Statistics and decision for civil engineers. McGraw-Hill, New York
Faber MH (2012) Statistics and probability theory in pursuit of engineering decision support. Springer, Berlin
Furuta H, Frangopol DM, Akiyama M (2015) Life-cycle of structural systems: design, assessment, maintenance and management. Taylor & Francis Group, London
EN 1990: Eurocode—basis of structural design
EN 1997-1: Eurocode 7: Geotechnical design—Part 1: general rules
Farrar CR, Worden K (2007) An introduction to structural health monitoring. Philos Trans R Soc A 365:303–315
Glišić B, Inaudi D (2007) Fibre optic methods for structural health monitoring. Wiley, Hoboken
Samiec D (2012) Distributed fibre-optic temperature and strain measurement with extremely high spatial resolution. Photonic International
Inaudi D, Glišić B (2010) Long-range pipeline monitoring by distributed fiber optic sensing. J Pressure Vessel Technol 132(1)
Pamileri L, Schenato L (2013) Distributed optical fiber sensing based on rayleigh scattering. Open Opt J 7(Suppl-1, M7):104–127
Feng Ch, Kadum JE, Schneider T (2019) The state-of-the-art of Brillouin distributed fiber sensing. IntechOpen. In: Liaw SK (ed) Fiber optic sensing—principle, measurement and applications
Wang W, Chang J, Lv G, Wang Z, Liu Z, Luo S, Jiang S, Liu X, Liu X, Liu Y (2013) Wavelength dispersion analysis on fiber-optic raman distributed temperature sensor system. Photon Sens 3(3):256–261
ENPROM Homepage. https://www.enprom.pl/en/. Last accessed 02 Nov 2020
Wu H, Zhu HH, Zhang Ch-Ch, Zhou G-Y, Zhu B, Zhang W, Azarafza M (2020) Strain integration-based soil shear displacement measurement using high-resolution strain sensing technology. Measurement 166:108210
Amanzadeh M, Aminossadati SM, Kizil MS, Rakić AD (2018) Recent developments in fibre optic shape sensing. Measurement 128:119–137
Zeni L, Picarelli L, Avolio B, Coscetta A, Papa R, Zeni G, Maio CD, Vassakki R, Minardo A (2015) Brillouin optical time-domain analysis for geotechnical monitoring. J Rock Mechan Geotech Eng 7:458–462
SHM SYSTEM Homepage. http://www.shmsystem.pl/?lang=en. Last accessed 02 Nov 2020
LUNA Homepage. https://lunainc.com/product/obr-4600. Last accessed 02 Nov 2020
Güemes A, Fernández-López A, Soller B (2010) Optical fiber distributed sensing—physical principles and applications. Struct Health Monit Int J 9(3):233–245
Gifford D, Soller B, Wolfe M, Froggatt ME (2005) Distributed fiber-optic sensing using Rayleigh backscatter. In: European Conference on Optical Communications (ECOC) Technical Digest, Glasgow, Scotland
Kishida K, Guzik A (2014) Study of optical fibers strain-temperature sensitivities using hybrid Brillouin-Rayleigh system. Photon Sens (2014)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Sieńko, R., Bednarski, Ł., Howiacki, T., Zuziak, K., Labocha, S. (2021). Possibilities of Composite Distributed Fibre Optic 3DSensor on the Example of Footing Pulled Out from the Ground: A Case Study. In: Rainieri, C., Fabbrocino, G., Caterino, N., Ceroni, F., Notarangelo, M.A. (eds) Civil Structural Health Monitoring. CSHM 2021. Lecture Notes in Civil Engineering, vol 156. Springer, Cham. https://doi.org/10.1007/978-3-030-74258-4_49
Download citation
DOI: https://doi.org/10.1007/978-3-030-74258-4_49
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-74257-7
Online ISBN: 978-3-030-74258-4
eBook Packages: EngineeringEngineering (R0)