Abstract
This paper deals the kinematic analysis of slider-crank mechanisms via the Bresse and jerk’s circles, which are two pairs of circles corresponding to different geometric loci of those coupler points with particular kinematic properties. The position vectors of the velocity, acceleration and jerk poles are determined in vector form, along with their corresponding vector fields, which are characterized by the angular velocity, acceleration and jerk of the coupler link, respectively. A specific formulation is proposed and implemented in Matlab to analyze and validate the graphical and numerical results, which can be obtained for several slider-crank mechanisms in different configurations.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
REFERENCES
Waldron, K.J., Kinzel, G.L., Agrawal, S.K.: Kinematics, Dynamics, and Design of Machinery, 3rd edn. Wiley, Chichester (2016)
Di Benedetto, A., Pennestrì, E.: Introduzione alla Cinematica dei Meccanismi, 1, 2, 3 edn. Casa Editrice Ambrosiana, Milan (1999). (in Italian)
Routh, E.J.: The Advanced Part of a Treatise on the Dynamics of a System of Rigid Bodies. Dover Publications, New York (1955)
Figliolini, G., Angeles, J.: The spherical equivalent of Bresse’s circles: the case of crossed double-crank linkages. ASME J Mech. Rob. 9(1), 011014–011111 (2017)
Lanni, C., Ceccarelli, M., Figliolini, G.: An analytical formulation for two circular-arc cams. Trans Can. Soc. Mech. Eng. 25, 29–49 (2001)
Lanni, C., Carbone, G., Ceccarelli, M., Ottaviano, E.: Numerical and experimental analyses of radial cams with circular-arc profiles. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. 220, 111–126 (2006)
Figliolini, G., Pennestrì, E.: Synthesis of quasi-constant transmission ratio planar linkages. ASME J. Mech. Des. 137(10), 102301–102312 (2015)
Condurache, D.: Higher-order acceleration center and vector invariants of rigid body motion. In: The 5th Joint International Conference on Multibody System Dynamics, paper n.160 (2018)
Figliolini, G., Lanni, C.: Jerk and jounce relevance for the kinematic performance of long-dwell mechanisms. In: 15th IFToMM World Congress, Krakow, Poland, paper n.0079 (2019)
Figliolini, G., Conte, M., Rea, P.: Algebraic algorithm for the kinematic analysis of crank/rocker mechanisms. ASME J Mech. Rob. 4(1), 011003–011011 (2012)
Figliolini, G., Lanni, C.: Geometric loci for the kinematic analysis of planar mechanisms via the instantaneous geometric invariants. In: Gasparetto, A., Ceccarelli, M. (eds.) MEDER: Proceedings of the 4th IFT0MM Symposium on Mechanism Design, pp. 184–192. Springer, Cham (2018)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Figliolini, G., Lanni, C., Tomassi, L. (2020). Kinematic Analysis of Slider – Crank Mechanisms via the Bresse and Jerk’s Circles. In: Carcaterra, A., Paolone, A., Graziani, G. (eds) Proceedings of XXIV AIMETA Conference 2019. AIMETA 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-41057-5_23
Download citation
DOI: https://doi.org/10.1007/978-3-030-41057-5_23
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-41056-8
Online ISBN: 978-3-030-41057-5
eBook Packages: EngineeringEngineering (R0)