Abstract
Proton exchange membrane (or polymer electrolyte membrane) (PEM) fuel cells are one type of clean energy converting device that can contribute to sustainable world development. PEM fuel cells use hydrogen or hydrocarbons for fuel and air as the oxidant, reacting through a silent electrochemical process at low temperatures (60–90 °C) to convert chemical energy to electricity with zero or low emissions. This technology is attractive mainly due to its environmentally friendly nature and highly efficient energy conversion as compared to traditional energy technologies such as internal combustion engines (ICEs). At our current stage of development, two kinds of PEM fuel cells are the most promising for commercialization: the hydrogen (H2)-fuelled PEM fuel cell, a major candidate for automobile applications to replace oil-dependant ICE technology; and the methanol-fuelled PEM fuel cell or direct methanol fuel cell (DMFC), which shows great potential for applications in portable electronic devices.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Gasteiger HA, Kocha SS, Sompalli B, Wagner FT. Activity benchmarks and requirements for Pt, Pt-alloy, and non-Pt oxygen reduction catalysts for PEMFCs. Appl Catal B: Environmental 2005;56: 9–35.
Liu HS, Song CJ, Zhang L, Zhang JJ, Wang HJ, Wilkinson DP. A review of anode catalysis in the direct methanol fuel cell. J Power Sources 2006;155:95–110.
Thompsett D. Pt alloys as oxygen reduction catalysts. In Vielstich W, Gasteiger HA, Lamm A, editors. Handbook of fuel cells – fundamentals, technology and applications. New York: John Wiley & Sons, 2003.
Mukerjee S, Srinivasan S. Enhanced electrocatalysis of oxygen reduction on platinum alloys in proton exchange membrane fuel cells. J Electroanal Chem 1993;357:201–24.
Mukerjee S, Srinivasan S, Soriaga MP. Role of structural and electronic properties of Pt and Pt alloys on electrocatalysis of oxygen reduction. J Electrochem Soc 1995;142:1409–22.
Mukerjee S, Srinivasan S. O2 reduction and structure-related parameters for supported catalysts. In Vielstich W, Gasteiger HA, Lamm A, editors. Handbook of fuel cells – fundamentals, technology and applications. New York: John Wiley & Sons, 2003.
Ralph TR, Hogarth MP. Catalysis for low temperature fuel cells: Part 1. The cathode challenges. Platinum Metals Rev 2002;46:3–14.
Toda T, Igarashi H, Watanabe M. Role of electronic property of Pt and Pt alloys on electrocatalytic reduction of oxygen. J Electrochem Soc 1998;145:4185–8.
Toda T, Igarashi H, Watanabe M. Enhancement of the electrocatalytic O2 reduction on Pt-Fe alloys. J Electroanal Chem 1999;460:258–62.
Toda T, Igarashi H, Uchida H, Watanabe M. Enhancement of the electroreduction of oxygen on Pt alloys with Fe, Ni, and Co. J Electrochem Soc 1999;146:3750–6.
Paulus UA, Wokaun A, Scherer GG, Schmidt TJ, Stamenkovic V, Radmilovic V, et al. Oxygen reduction on carbon-supported Pt-Ni and Pt-Co alloy catalysts. J Phys Chem B 2002;106:4181–91.
Paulus UA, Wokaun A, Scherer GG, Schmidt TJ, Stamenkovic V, Markovic NM, et al. Oxygen reduction on high surface area Pt-based alloy catalysts in comparison to well defined smooth bulk alloy electrodes. Electrochim Acta 2002;47:3787–98.
Stamenkovic V, Schmidt TJ, Ross PN, Markovic NM. Surface Composition Effects in Electrocatalysis: Kinetics of Oxygen Reduction on Well-Defined Pt3Ni and Pt3Co Alloy Surfaces. J Phys Chem B 2002;106:11970–9.
Stamenkovic VR, Mun BS, Mayrhofer KJJ, Ross PN, Markovic NM. Effect of surface composition on electronic structure, stability, and electrocatalytic properties of Pttransition metal alloys: Pt-skin versus Pt-skeleton surfaces. J Am Chem Soc 2006;128:8813–9.
Stamenkovic V, Mun BS, Mayrhofer KJJ, Ross PN, Markovic NM, Rossmeisl J, et al. Changing the activity of electrocatalysts for oxygen reduction by tuning the surface electronic structure. Angew Chem Int Ed 2006;45:2897–901.
Stamenkovic VR, Fowler B, Mun BS, Wang G, Ross PN, Lucas CA, et al. Trends in electrocatalysis on extended and nanoscale Pt-bimetallic alloy surfaces. Nat Mater 2007;6:241–7.
Stamenkovic VR, Fowler B, Mun BS, Wang G, Ross PN, Lucas CA, et al. Improved oxygen reduction activity on Pt3Ni(111) via increased surface site availability. Science 2007;315:493–7.
Paffett MT, Beery JG, Gottesfeld S. Oxygen reduction at Pt0.65Cr0.35, Pt0.2Cr0.8 and roughened platinum. J Electrochem Soc 1988;135;1431–6.
Kinoshita K. Particle size effects for oxygen reduction on highly dispersed platinum in acid electrolytes. J Electrochem Soc 1990;137:845–8.
Jalan V and Taylor EJ. Importance of interatomic spacing in catalytic reduction of oxygen in phosphoric acid. J Electrochem Soc 1983;130:2299–302.
Min M, Cho J, Cho K, Kim H. Particle size and alloying effects of Pt-based alloy catalysts for fuel cell applications. Electrochim Acta 2000;45:4211–17.
Norskov JK, Rossmeisl J, Logadottir A, Lindqvist L, Kitchin JR, Bligaard T, et al. Origin of the overpotential for oxygen reduction at a fuel-cell cathode. J Phys Chem B 2004;108:17886–92.
Wang JX, Markovic NM, Adzic RR. Kinetic analysis of oxygen reduction on Pt(111) in acid solutions: intrinsic kinetic parameters and anion adsorption effects. J Phys Chem B 2004;108:4127–33.
Borup R, Meyers J, Pivovar B, Kim YS, Mukundan R, Garland N, et al. Scientific aspects of polymer electrolyte fuel cell durability and degradation. Chem Rev 2007;107:3904–51.
Antolini E, Salgado JRC, Gonzalez ER. The stability of Pt-M (M = first row transition metal) alloy catalysts and its effect on the activity in low temperature fuel cells: a literature review and tests on a Pt-Co catalyst. J Power Sources 2006;160:957–68.
Wakabayashi N, Takeichi M, Uchida H, Watanabe M. Temperature dependence of oxygen reduction activity at Pt-Fe, Pt-Co, and Pt-Ni alloy electrodes. J Phys Chem B 2005;109:5836–41.
Colon-Mercado HR, Kim H, Popov BN. Durability study of Pt3Ni1 catalysts as cathode in PEM fuel cells. Electrochem Commun 2004;6:795–9.
Wei Z, Guo H, Tang Z. Methanol electro-oxidation on platinum and platinum-tin alloy catalysts dispersed on active carbon. J Power Sources 1996;62:233–42.
Salgado JRC, Antolini E, Gonzalez ER. Structure and activity of carbon-supported Pt-Co electrocatalysts for oxygen reduction. J Phys Chem B 2004;108:17767–74.
Yu P, Pemberton M, Plasse P. PtCo/C cathode catalyst for improved durability in PEMFCs. J Power Sources 2005;144:11–20.
Zhang J, Sasaki K, Sutter E, Adzic RR. Stabilization of platinum oxygen-reduction electrocatalysts using gold clusters. Science 2007;315:220–2.
Arico AS, Srinivasan, Antonucci V. DMFCs: from fundamental aspects to technology development. Fuel Cells 2001;1:133–61.
Bockris, JOM, Wroblowa H. Electrocatalysis. J Electroanal Chem 1964;7;428–51.
Watanabe M, Uchida M, Motoo S. Preparation of highly dispersed Pt plus Ru alloy clusters and the activity for the electrooxidation of methanol. J Electroanal Chem Interfacial Electrochem 1987;229;395–406.
Guo J, Sun G, Sun S, Yan S, Yang W, Qi J, et al. Polyol-synthesized PtRu/C and PtRu black for direct methanol fuel cells. J Power Sources 2007;168:299–306.
Antolini E. Platinum-based ternary catalysts for low temperature fuel cells. Part I. Preparation methods and structural characteristics. Appl Catal B: Environmental 2007;74:324–36.
Antolini E. Platinum-based ternary catalysts for low temperature fuel cells. Part II. Electrochemical properties. Appl Catal B: Environmental 2007;74:337–50.
Ley KL, Liu R, Pu C, Fan Q, Leyarovska N, Segre C, et al. Methanol oxidation on single-phase Pt-Ru-Os ternary alloys. J Electrochem Soc 1997;144:1543–8.
Gotz M, Wendt H. Binary and ternary anode catalyst formulations including the elements W, Sn and Mo for PEMFCs operated on methanol or reformate gas. Electrochim Acta 1998;43:3637–44.
Roth C, Gotz M, Fuess H. Synthesis and characterization of carbon-supported Pt-Ru-WO catalysts by spectroscopic and diffraction methods. J Appl Electrochem 2001;31:793–8.
Arico AS, Poltarzewski Z, Kim H, Morana A, Giordano N, Antonucci V. Investigation of a carbon-supported quaternary Pt-Ru-Sn-W catalyst for direct methanol fuel cells. J Power Sources 1995;55:159–66.
Reddington E, Sapienza A, Gurau B, Viswanathan R, Sarangapani S, Smotkin ES, et al. Combinatorial electrochemistry: a highly parallel, optical screening method for discovery of better electrocatalysts. Science 1998;280:1735–7.
Choi WC, Kim JD, Woo SI. Quaternary Pt-based electrocatalyst for methanol oxidation by combinatorial electrochemistry. Catal Today 2002;74:235–40.
Whitacre JF, Valdez T, Narayanan SR. Investigation of direct methanol fuel cell electrocatalysts using a robust combinatorial technique. J Electrochem Soc 2005;152:A1780–9.
Neburchilov V, Wang HJ, Zhang JJ. Low Pt content Pt-Ru-Ir-Sn quaternary catalysts for anodic methanol oxidation in DMFC. Electrochem Comm 2007;9:1788–92.
Hamnett A. Mechanism and electrocatalysis in the direct methanol fuel cell. Catal Today 1997;38:445–57.
Watanabe M, Motoo S. Electrocatalysis by ad-atoms: Part II. Enhancement of the oxidation of methanol on platinum by ruthenium ad-atoms. J Electroanal Chem 1975;60:267–73.
Frelink T, Visscher W, Van Veen JAR. On the role of Ru and Sn as promoters of methanol electro-oxidation over Pt. Surf Sci 1995;335:353–60.
Gasteiger HA, Markovic N, Ross PN, Cairns EJ. Temperature-dependent methanol electro-oxidation on well-characterized pt-ru alloys. J Electrochem Soc 1994;141:1795–803.
Parsons R, Vandemoot T. The oxidation of small organic molecules: a survey of recent fuel cell related research. J Electroanal Chem 1988;257:9–45.
Mukerjee S, McBreen J. The effect of Ru and Sn additions to Pt on the electrocatalysis of methanol oxidation: An in situ XAS investigation. Proceedings of the 2nd international symposium on new materials for fuel cells and modern battery systems. Savadogo O, Roberge PR, editors. Montreal, Canada: Ecole Polytechnique de Montreal;1997:548–59.
McBreen J, Mukerjee S. In situ X-ray absorption studies of a pt-ru electrocatalyst. J Electrochem Soc 1995;142:3399–404.
Iwasita T, Nart FC, Vielstich W. FTIR study of the catalytic activity of a 85:15 Pt. Ru alloy for methanol oxidation. Phys Chem Chem Phys 1990, 94:1030–4.
Lu C, Rice C, Masel RI, Babu PK, Waszczuk P, Kim HS, et al. UHV, electrochemical NMR, and electrochemical studies of platinum/ruthenium fuel cell catalysts. J Phys Chem B 2002;106:9581–9.
Yang H, Yang Y, Zou S. In situ surface-enhanced Raman spectroscopic studies of CO adsorption and methanol oxidation on Ru-modified Pt surfaces. J Phys Chem C 2007;111:19058–65.
Hobbs BS, Tseung ACC. High performance, platinum activated tungsten oxide fuel cell electrodes. Nature 1969;222:556–8.
Shen P, Chen K, Tseung ACC. Co-deposited Pt-WO3 electrodes. Part 1. Methanol oxidation and in situ FTIR studies. J Chem Soc Faraday Trans 1994;90:3089–96.
Davies JC, Hayden BE, Pegg DJ, Rendall ME. The electro-oxidation of carbon monoxide on ruthenium modified Pt(1 1 1). Surf Sci 2002;496:110–20.
Stamenkovic VR, Arenz M, Lucas CA, Gallagher ME, Ross PN, Markovi NM. Surface chemistry on bimetallic alloy surfaces: adsorption of anions and oxidation of CO on PtSn(111). J Am Chem Soc 2003;125:2736–45.
Desai S, Neurock M. A first principles analysis of CO oxidation over Pt and Pt Ru (111) surfaces. Electrochim Acta 2003;48:3759–73.
Kim T, Kobayashi K, Takahashi M, Nagai M. Effect of Sn in Pt-Ru-Sn ternary catalysts for CO/H and methanol electrooxidation. Chem Lett 2005;34:798–9.
Samjeské G, Wang H, Loffler T, Baltruschat H. CO and methanol oxidation at Ptelectrodes modified by Mo. Electrochim Acta 2002;47:3681–92.
Piela P, Eickes C, Brosha E, Garzon F, Zelenay P. Ruthenium crossover in direct methanol fuel cell with Pt-Ru black anode. J Electrochem Soc 2004;151:A2053–9.
Zelenay P. Performance durability of direct methanol fuel cells. ECS Transactions 2005;1:483–95.
Chen W, Sun G, Guo J, Zhao X, Yan S, Tian J, et al. Test on the degradation of direct methanol fuel cell. Electrochim Acta 2006;51:2391–9.
Gancs L, Hakim N, Hult BN, Mukerjee S. Dissolution of Ru from PtRu electrocatalysts and its consequences in DMFCs. ECS Trans 2006;3:607–18.
Sarma LS, Chen CH, Wang GR, Hsueh KL, Huang CP, Sheu HS, et al. Investigations of direct methanol fuel cell (DMFC) fading mechanisms. J Power Sources 2007;167:358–65.
Gancs L, Hult BN, Hakim N, Mukerjee S. The impact of Ru contamination of a PtC electrocatalyst on its oxygen-reducing activity. Electrochem Solid-State Lett 2007;10:150–4.
Chung Y, Pak C, Park GS, Jeon WS, Kim JR, Lee Y, et al. Understanding a degradation mechanism of direct methanol fuel cell using TOF-SIMS and XPS. J Phys Chem C 2008;112:313–8.
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2008 Springer London
About this chapter
Cite this chapter
Liu, H., Xia, D., Zhang, J. (2008). Platinum-based Alloy Catalysts for PEM Fuel Cells. In: Zhang, J. (eds) PEM Fuel Cell Electrocatalysts and Catalyst Layers. Springer, London. https://doi.org/10.1007/978-1-84800-936-3_13
Download citation
DOI: https://doi.org/10.1007/978-1-84800-936-3_13
Publisher Name: Springer, London
Print ISBN: 978-1-84800-935-6
Online ISBN: 978-1-84800-936-3
eBook Packages: EngineeringEngineering (R0)