Skip to main content

Measurement of Ultrasonic Wavespeeds in Off-Axis Directions of Composite Materials

  • Conference paper
Review of Progress in Quantitative Nondestructive Evaluation

Part of the book series: Review of Progress in Quantitative Nondestructive Evaluation ((RPQN,volume 6 A))

Abstract

The relationship of NDE with structural analysis is to provide quantitative information about material mechanical properties. For a composite structure (such as a rocket motor case) which is designed to handle in-plane loading, NDE should, ideally, provide information about the in-plane stiffness and strength properties of the structural material [1]. Because acoustic wave propagation depends on material elastic properties as well as being sensitive to material inhomogeneities, ultrasonic NDE has been nominated as a viable means of satisfying the needs of structural analytical modeling [2]. To address the need to detect in-plane properties, leaky Lamb wave [3,4] and non-normal incidence transmission [1] methods are being developed, for example. Development of composite ultrasonic NDE techniques, which are sensitive to material mechanical properties in the plane of a structure, required an understanding of acoustic wave propagation in anisotropic media. If a wave is introduced into the structure wall with an oblique angle of incidence less than critical angle, the refracted wave will travel in a non-principal or off-axis direction of the composite material. As a result, the wave energy will not generally travel in a direction normal to its phase fronts as it would in an isotropic medium. The acoustic wave energy or wave group propagates at a deviation angle, ψ, with respect to the phase front normal [5,6] as shown in Fig. 1. The deviation angle should be considered when measuring acoustic phase velocities from which the stiffnesses are calculated. The following sections discuss the effect of the group velocity propagation direction upon phase velocity measurements of quasi-longitudinal and quasi-shear waves propagating in non-principal directions in principal planes of orthotropic composite materials. Experimental results are shown for unidirectional graphite composite material samples.

Formerly affiliated with Hercules Aerospace, Magna, Utah

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 74.99
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. L. H. Pearson, W. J. Murri, and D. S. Gardiner, Ultrasonic Detection of In-Plane Properties of Composite Laminates, in: “IEEE 1985 Ultrasonics Symposium Proceedings,” B. R. McAvoy, ed., ( IEEE, New York, 1985 ).

    Google Scholar 

  2. E. G. Henneke and J. C. Duke, “Analytical Ultrasonics for Evaluation of Composite Material Response,” Mat. Eval., (May 1985).

    Google Scholar 

  3. D. E. Chimenti and A. H. Nayfeh, “Leaky Lamb Waves in Fibrous Composite Laminates,” J. Appl. Phys., 58, 4531 (1985).

    Article  Google Scholar 

  4. Y. Bar-Cohen and D. E. Chimenti, NDE of Defects in Composites Using Leaky Lamb Waves, jLn: “Proceedings of The Fifteenth Symposium on Nondestructive Evaluation,” D. W. Moore and G. A. Matskanin, eds., NTIAC SwRI, San Antonio, (1985).

    Google Scholar 

  5. H. M. Ledbetter and R. D. Kriz, “Elastic-Wave Surfaces in Solids,” Phys. Stat. Sol., (b) 114, 475 (1982).

    Article  Google Scholar 

  6. B. A. Auld, “Acoustic Fields and Waves in Solids,” John Viley and Sons, New York (1973).

    Google Scholar 

  7. C. A. Ross, Stress Valve Propagation in Composite Materials, in: “Dynamic Response of Composite Materials,” SESA Fall Meeting, Ft. Lauderdale (1980).

    Google Scholar 

  8. R. D. Kriz and V. V. Stinchomb, “Elastic Moduli of Transversely Isotropic Graphite Fibers and Their Composites,” Experimental Mechanics, ( February 1979 ).

    Google Scholar 

  9. E. G. Henneke and G. L. Jones, “Critical Angle for Reflection at a Liquid-Solid Interface in Single Crystals,” J. Acoust. Soc. Am. 59, 204 (1976).

    Article  Google Scholar 

  10. R. E. Smith, “Ultrasonic Elastic Constants of Carbon Fibers and Their Composites,” J. Appl. Phys., 43, 2555 (1972).

    Article  Google Scholar 

  11. M. F. Markham, “Measurement of the Elastic Constants of Fiber Composites by Ultrasonics,” Composites, 1, 145 (1970).

    Article  Google Scholar 

  12. L. J. Busse and J. G. Miller, “Response Characteristics of a Finite Temperature, Phase Insensitive Ultrasonic Receiver Based Upon the Acoustoelectrie Effect,” J. Acoust. Soc. Am., 70, 1370 (1981).

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Editor information

Editors and Affiliations

Rights and permissions

Reprints and permissions

Copyright information

© 1987 Springer Science+Business Media New York

About this paper

Cite this paper

Pearson, L.H., Murri, W.J. (1987). Measurement of Ultrasonic Wavespeeds in Off-Axis Directions of Composite Materials. In: Thompson, D.O., Chimenti, D.E. (eds) Review of Progress in Quantitative Nondestructive Evaluation. Review of Progress in Quantitative Nondestructive Evaluation, vol 6 A. Springer, Boston, MA. https://doi.org/10.1007/978-1-4613-1893-4_125

Download citation

  • DOI: https://doi.org/10.1007/978-1-4613-1893-4_125

  • Publisher Name: Springer, Boston, MA

  • Print ISBN: 978-1-4612-9054-4

  • Online ISBN: 978-1-4613-1893-4

  • eBook Packages: Springer Book Archive

Publish with us

Policies and ethics