Abstract
This chapter provides a comprehensive overview on the micro-electrical discharge machining (micro-EDM) process. The physical principle of micro-EDM and differences between macro- and micro-EDM and micro-EDM system components are discussed. A discussion on major operating parameters of micro-EDM and their effect on the performance parameters is presented. A brief discussion on variants of micro-EDM and their industrial applications has been included. The research advances on the areas of micro-EDM and micro-EDM-based compound and hybrid machining processes have been discussed. Finally, a comparative evaluation of micro-EDM to other machining processes has been presented.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ho KH, Newman ST (2003) State of the art electrical discharge machining (EDM). Int J Mach Tools Manuf 43:1287–1300
Ho KH, Newman ST, Rahimifard S, Allen RD (2004) State of the art wire electrical discharge machining. Int J Mach Tools Manuf 44:1247–1259
Arbizu ID, Pérez CJL (2013) History and foundations of EDM: the least conventional of the machining. http://www.interempresas.net/MetalWorking/Articles/12068-The-least-conventional-of-the-machining.html, last accessed 24 Apr 2013
Kurafuji H, Masuzawa T (1968) Micro-EDM of cemented carbide alloys. Jpn Soc Electr Mach Eng 2(3):1–16
Jameson EC (2001) Description and development of electrical discharge machining (EDM), in: electrical discharge machining. Society of Manufacturing Engineers, Dearborn, Michigan p 12
Masuzawa T (2000) State of the art micromachining. Ann CIRP 49(2):473–488
Gentili E, Tabaglio L, Aggogeri F (2005) Review on micromachining techniques. Courses Lectures Int Centre Mech Sci 486:387 dimgruppi.ing.unibs.it
Schumacher BM (2004) After 60 years of EDM the discharge process remains still disputed. J Mater Process Technol 149:376–381
Takahata K (2009) Micro-electro-discharge machining technologies for MEMS, Chapter 10. Micro Electron Mech Syst INTECH, Croatia, pp 144–164
Rahman M, Asad ABMA, Masaki T, Saleh T, Wong YS, Kumar AS (2010) A multiprocess machine tool for compound micromachining. Int J Mach Tools Manuf 50(4):344–356
Wong YS, Rahman M, Lim HS, Han H, Ravi N (2003) Investigation of micro-EDM material removal characteristics using single RC-pulse discharges. J Mater Process Technol 140(1–3):303–307
Masuzawa T (2001) Micro EDM. In: Proceedings of the ISEM XIII. Fundación Tekniker, pp 3–19 ISBN 932064-0-7
Micro manufacturing, differences between macro and micro EDM, Ministerio de Ciencia e Innovación. http://www.micromanufacturing.net/didactico/Desarollo/edm-eng/6-differences-between-macro-and-micro-edm. Last Accessed 10 Dec 2012
Katz Z, Tibbles CJ (2005) Analysis of micro-scale EDM process. Int J Adv Manuf Technol 25:923–928
Uhlmann E, Piltz S, Doll U (2005) Machining of micro/miniature dies and moulds by electrical discharge machining—recent development. J Mater Process Technol 167:488–493
Han F, Yamada Y, Kawakami T, Kunieda M (2004) Improvement of machining characteristics of micro-EDM using transistor type isopulse generator and servo feed control. Precis Eng 28:378–385
Kunieda M, Lauwers B, Rajurkar KP, Schumacher BM (2005) Advancing EDM through fundamental insight into the process. Ann CIRP 54(2):599–622
Rajurkar KP, Levy G, Malshe A, Sundaram MM, McGeough J, Hu X, Resnick R, De Silva A (2006) Micro and nano machining by electro-physical and chemical processes. Ann CIRP 55(2):643–666
Zhang L, Jia Z, Liu W, Li A (2012) A two-stage servo feed controller of micro-EDM based on interval type-2 fuzzy logic. Int J Adv Manuf Technol 59(5–8):633–645
Yang GH, Liu F, Lin HB (2011) Research on an embedded servo control system of micro-EDM. Appl Mech Mater 120:573–577
Rajurkar KP, Wang WM (1991) On-line monitor and control for wire breakage in WEDM. Ann CIRP 40(1):219–222
Snoeys R, Dauw D, Kruth JP (1980) Improved adaptive control system for EDM processes. Ann CIRP 29(1):97–101
McGeough JA (1988) Advanced methods of machining, 1st edn. Chapman and Hall, USA. ISBN 0-412-31970-5
Pham DT, Dimov SS, Bigot S, Ivanov A, Popov K (2004) Micro-EDM—recent developments and research issues. J Mater Process Technol 149:50–57
Puertas I, Luis CJ, Álvarez L (2004) Analysis of the influence of EDM parameters on surface quality, MRR and EW of WC–Co. J Mater Process Technol 153, 154:1026–1032
Hewidy MS, El-Taweel TA, El-Safty MF (2005) Modelling the machining parameters of wire electrical discharge machining of Inconel 601 using RSM. J Mater Process Technol 169:328–336
Qu J, Shih AJ (2002) Development of the cylindrical wire electrical discharge machining process, part 2: surface integrity and roundness. Trans ASME 124
Tsai Y, Masuzawa T (2004) An index to evaluate the wear resistance of the electrode in micro-EDM. J Mater Process Technol 149:304–309
Cao G, Zhao W, Wang Z, Guo Y (2005) Instantaneous fabrication of tungsten microelectrode based on single electrical discharge. J Mater Process Technol 168:83–88
Jahan MP, Wong YS, Rahman M (2009) A study on the quality micro-hole machining of tungsten carbide by micro-EDM process using transistor and RC-type pulse generator. J Mater Process Technol 209(4):1706–1716
Bleys P, Kruth JP, Lauwers B (2004) Sensing and compensation of tool wear in milling EDM. J Mater Process Technol 149:139–146
Yu Z, Jun T, Kunieda M (2004) Dry EDM of cemented carbide. J Mater Process Technol 149:353–357
Tao J, Shih AJ, Ni J (2008) Near-dry EDM milling of mirror-like surface finish. Int J Electr Mach 13:29–33
Subbu SK, Karthikeyan G, Ramkumar J, Dhamodaran S (2011) Plasma characterization of dry μ-EDM. Int J Adv Manuf Technol 56(1–4):187–195
Zhang QH, Zhang JH, Deng JX, Qin Y, Niu ZW (2002) Ultrasonic vibration electrical discharge machining in gas. J Mater Process Technol 129:135–138
Lim HS, Wong YS, Rahman M, Lee EMK (2003) A study on the machining of high-aspect ratio micro-structures using micro EDM. J Mater Process Technol 140:318–325
Jahan MP, Rahman M, Wong YS, Fuhua L (2010) On-machine fabrication of high-aspect-ratio micro-electrodes and application in vibration-assisted micro-electrodischarge drilling of tungsten carbide. In: Proceedings of the institution of mechanical engineers, part B: J Eng Manuf 224(5):795–814
Masuzawaa T, Fujinoa M, Kobayashia K, Suzukib T, Kinoshita N (1985) Wire electro-discharge grinding for micro-machining. CIRP Ann Manuf Technol 34(1):431–434
Song KY, Chung DK, Park MS, Chu CN (2009) Micro-electrical discharge drilling of tungsten carbide using deionized water. J Micromech Microeng 19:045006
Egashira K, Taniguchi T, Hanajima S (2006) Planetary EDM of micro holes. Int J Electr Mach 11:15–18
Yu ZY, Rajurkar KP, Shen H (2002) High aspect ratio and complex shaped blind micro holes by micro EDM. Ann CIRP 51(1):359–362
Kim BH, Park BJ, Chu CN (2006) Fabrication of multiple electrodes by reverse EDM and their application in micro ECM. J Micromech Microeng 16(4):843–850
Sarix Micro-EDM machine. http://www.sarix.com/index_e.html. Last Accessed 10 Dec 2012
Asad ABMA, Masaki T, Rahman M, Lim HS, Wong YS (2007) Tool-based micro-machining. J Mater Process Technol 192–193:204–211
Morgan CJ, Vallance RR, Marsh ER (2006) Micro-machining and micro-grinding with tools fabricated by micro electro-discharge machining. Int J Nanomanuf 1(2):242–258
Wada T, Masaki T, Davis DW (2002) Development of micro grinding process using micro EDM trued diamond tools. In: Proceedings of the annual meeting of ASPE
Fleischer J, Masuzawa T, Schmidt J, Knoll M (2004) New applications for micro-EDM. J Mater Process Technol 149:246–249
Campana S, Miyazawa S (1999) Micro-EDM and ECM in DI water. In: Proceedings of annual meeting of American society of precision engineering (ASPE)
Nguyen MD, Rahman M, Wong YS (2012) Simultaneous micro-EDM and micro-ECM in low-resistivity deionized water. Int J Mach Tools Manuf 54–55:55–65
Zeng Z, Wang Y, Wang Z, Shan D, He X (2012) A study of micro-EDM and micro-ECM combined milling for 3D metallic micro-structures. Precis Eng 36(3):500–509
Takahata K, Shibaike N, Guckel H (2000) High-aspect-ratio WC-Co microstructure produced by the combination of LIGA and micro-EDM. Microsyst Technol 6(5):175–178
Huang J-D, Kuo C-L (2002) Pin-plate micro assembly by integrating micro-EDM and Nd-YAG laser. Int J Mach Tools Manuf 42:1455–1464
Kuo C-L, Huang J-D, Liang H-Y (2002) Precise micro-assembly through an integration of micro-EDM and Nd-YAG. Int J Adv Manuf Technol 20:454–458
Kuo C-L, Huang J-D, Liang H-Y (2003) Fabrication of 3D metal microstructures using a hybrid process of micro-EDM and laser assembly. Int J Adv Manuf Technol 21:796–800
Lin YC, Yan BH, Chang YS (2000) Machining characteristics of titanium alloy (Ti-6Al-4V) using a combination process of EDM with USM. J Mater Process Technol 104(3):171–177
Endo T, Tsujimoto T, Mitsui K (2008) Study of vibration-assisted micro-EDM-the effect of vibration on machining time and stability of discharge. Precis Eng 32(4):269–277
Tong H, Li Y, Wang Y (2008) Experimental research on vibration assisted EDM of micro-structures with non-circular cross-section. J Mater Process Technol 208(1–3):289–298
Jahan MP, Saleh T, Rahman M, Wong YS (2010) Development, modeling, and experimental investigation of low frequency workpiece vibration-assisted micro-EDM of tungsten carbide. J Manuf Sci Eng 132(5):054503 (8)
Kansal HK, Singh S, Kumar P (2007) Technology and research developments in powder mixed electric discharge machining (PMEDM). J Mater Process Technol 184:32–41
Jahan MP, Anwar MM, Wong YS, Rahman M (2009) Nanofinishing of hard materials using micro-EDM. Proc Inst Mech Eng Part B J Eng Manuf 223:1127–1142
Sorkhel SK, Bhattacharyya B, Mitra S, Doloi B (1996) Development of electrochemical discharge machining technology for machining of advanced ceramics. In: International conference on agile manufacturing, pp 98–103
Han M-S, Min B-K, Lee SJ (1999) Improvement of surface integrity of electro-chemical discharge machining process using powder-mixed electrolyte. J Mater Process Technol 95:145–154
Bhattacharyya B, Doloi BN, Sorkhel SK (1999) Experimental investigations into electrochemical discharge machining (ECDM) of non-conductive ceramic materials. J Mater Process Technol 95:145–154
Yang CT, Song SL, Yan BH, Huang FY (2006) Improving machining performance of wire electrochemical discharge machining by adding SiC abrasive to electrolyte. Int J Mach Tools Manuf 46:2044–2050
Heinz K, Kapoor SG, Devor RE, Surla V (2011) An investigation of magnetic-field-assisted material removal in micro-EDM for nonmagnetic materials. J Manuf Sci Eng 133(021002):9
Yeo SH, Murali M, Cheah HT (2004) Magnetic field assisted micro electro-discharge machining. J Micromech Microeng 14:1526–1529
Jahan MP, Rahman M, Wong YS (2011) A review on the conventional and micro-electrodischarge machining of tungsten carbide. Int J Mach Tools Manuf 51(12):837–858
Reynaerts D, Heeren PH, Van Brussel H, Beuret C, Larsson O, Bertholds A (1997) Microstructuring of silicon by electro-discharge machining (EDM) part II: applications. Sens Actuators 61:379–386
Grzesik W (2008) Advanced machining processes of metallic materials: theory, modelling and applications chapter sixteen micromachining. Elsevier publishers, Amsterdam
Byrne G, Dornfeld D, Denkena B (2003) Advancing cutting technology. Ann CIRP 52(2):483–507
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag London
About this chapter
Cite this chapter
Jahan, M.P. (2013). Micro-Electrical Discharge Machining. In: Davim, J. (eds) Nontraditional Machining Processes. Springer, London. https://doi.org/10.1007/978-1-4471-5179-1_4
Download citation
DOI: https://doi.org/10.1007/978-1-4471-5179-1_4
Published:
Publisher Name: Springer, London
Print ISBN: 978-1-4471-5178-4
Online ISBN: 978-1-4471-5179-1
eBook Packages: EngineeringEngineering (R0)