Abstract
This chapter discusses several other types of atomizers that were not considered in the previous chapters. This includes “swirl nozzles, T-jet nozzles, and vibrating mesh nebulizers.” The droplet size correlations for different types of nozzles is provided in Chap. 24.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
A. H. Lefebvre, Atomization and sprays, Taylor & Francis, New York, 1989.
L. Bayvel, Z. Orzechowski, Liquid atomization, Taylor & Francis, Philadelphia, 1993.
J.-H. Rhim, S.-Y. No, Breakup length of conical emulsion sheet discharged by pressure-swirl atomizer, Int. J. Automot. Technol. 2(3), 103–107 (2001).
G. I. Taylor, The mechanics of a swirl atomizers, in: Proceedings of the Seventh International Congress for Applied Mechanics 2(1), 280 (1948).
G. I. Taylor, The boundary layer in the converging nozzle of swirl atomizer, Quart. J. Mech. Appl. Math. 3, 129 (1950).
A. M. Binnie, D. P. Harris, The application of boundary layer theory to swirling flow through a nozzle, Quart. J. Mech. Appl. Math. 3, 89 (1950).
E. Giffen, B. S. Massey, Some observations on flow in spray nozzles, Motor Industry Res. Assoc. Report No. 1948/4, (1950).
R. W. Tate, W. R. Marshall, Atomization by centrifugal nozzles, J. Chem. Eng. Prog. 49, 169 (1953).
A. M. Binnie, Viscosity effects in the nozzle of a swirl atomizer, Quart. J. Mech. Appl. Math. 8, 394 (1955).
A. M. Binnie, J. D. Teare, Experiments in the flow of a swirling water through a pressure nozzle and an open trumpet, Proc. R. Soc. London A 235, 78 (1956).
A. M. Binnie, G. A. Hakings, M. Y. M. Kamel, The flow of swirling water through a convergent–divergent nozzle, J. Fluid Mech. 3, 261 (1957).
S. P. Kutty, M. Narasimhan, K. Narayanaswamy, Design and prediction of discharge rate, cone angle and air core diameter of swirl chamber atomizers, in: Proceedings of the First International Conference on Liquid Atomization and Spray Systems, Tokyo, p. 93 (1978).
S. K. Som, S. G. Mukherjee, Theoretical and experimental investigations on the formation of air core in a swirl spray atomizing nozzle, Appl. Sci. Res. 36, 173 (1980).
A. R. Jones, Design optimization of a large pressure jet atomizer for power plant, in: Proceedings of the Second International Conference on Liquid Atomization and Spray Systems, p. 181 (1982).
N. K. Rizk, A. H. Lefebvre, Internal flow characteristics of simplex swirl atomizers, AIAA J. Propuls. Power 1(3), 193–199 (1985a).
N. K. Rizk, A. H. Lefebvre, Prediction of velocity coefficient and spray cone angle for simplex swirl atomizers, in: Proceedings of the Third International Conference on Liquid Atomization and Spray Systems, London, p. 111c/2/1 (1985b).
M. Suyari, A. H. Lefebvre, Film thickness measurements in simplex swirl atomizer, AIAA J. Propuls. Power 2(6), 528–533 (1986).
X. F. Wang, A. H. Lefebvre, Influence of ambient pressure on pressure swirl atomization, Atomization Spray Tech. 3, 209 (1987).
S. K. Chen, A. H. Lefebvre, J. Rollbuhler, Factors influencing the effective spray cone angle of pressure swirl atomizers, ASME J. Eng. Gas Turbine Power 114, 97 (1992).
S. M. Jeng, M. A. Jog, M. A. Benjamin, Computational and experimental study of liquid sheet emanating from simplex fuel nozzle, AIAA J. 36 (2), 201 (1998).
Y. Liao, A. T. Sakman, S. M. Jeng, M. A. Jog, M. A. Benjamin, A comprehensive model to predict simplex atomizer performance, ASME J. Eng. Gas Turbine Power 121, 285 (1999).
A.T. Sakman, M. A. Jog, S. M. Jeng, M. A. Benjamin, Parametric study of simplex fuel nozzle internal flow and performance, AIAA J. 38(7), 1214 (2000).
A. Datta, S. K. Som, Numerical prediction of air core diameter, coefficient of discharge and spray cone angle of a swirl spray pressure nozzle, Int. J. Heat Fluid Flow 21, 412 (2000).
M. R. Halder, S. K. Dash, S. K. Som, Initiation of air core in a simplex nozzle and the effects of operating and geometrical parameters on its shape and size, Exp. Thermal Fluid Sci. 26, 871–878 (2002).
R. J. Kenny, J. R. Hulka, M. D. Moser, O. N. Rhys, Effect of Chamber Backpressure on Swirl Injector Fluid Mechanics, J. Propuls. Power 25(4), (2009).
V. Bazarov, V. Yang, P. Puri, Design and dynamics of jet and swirl injectors, Liquid Rocket Thrust Chambers: Aspects of Modeling, Analysis, and Design, edited by V. Yang, M. Habiballah, J. Hulka, and M. Poppe, Vol. 200, Progress in Astronautics and Aeronautics, AIAA, Reston, pp. 19–103 (2004).
M. Doumas, R. Laster, Liquid-film properties in centrifugal spray nozzles, Chem. Eng. Prog. 49(9), 518–526 (1953).
S. K. Dash, M. R. Halder, M. Peric, S. K. Som, Formation of air core in nozzles with tangential entry, J. Fluids Eng. 123(4), 829–835 (2001).
D. Donjat, J. Estivalezes, M. Michau, G. Lavergne, Phenomenological study of the pressure swirl atomizer internal flow, Proceedings of the 9th International Conference on Liquid Atomization and Spray Systems, Sorrento, Italy, pp. 12–19 (2003).
S. M. DeCorso, G. A. Kemeny, Effect of ambient and fuel pressure on nozzle spray angle, American Society of Mechanical Engineers Paper No. 1956-GTP-3, April 1956.
J. Ortman, A. H. Lefebvre, Internal fuel distributions from pressure-swirl atomizers, J. Propuls. Power, 1(1), 11–15 (1985).
K. S. Park, S. D. Heister, Nonlinear modeling of drop size distributions produced by pressure-swirl atomizers, Int. J. Multiphase Flow 36, 1–12 (2010).
H. Park, S. D. Heister, Nonlinear simulation of free surfaces and atomization in pressure swirl atomizers, Phys. Fluids 18, 52103 (2006).
A. Mandal, M. A. Jog, J. Xue, A. A. Ibrahim, Flow of power-law fluids in simplex atomizers, Int. J. Heat Fluid Flow 29, 1494–1503 (2008).
J. Xue, M. A. Jog, S. M. Jeng, E. Steinthorsson, M. A. Benjamin, Effect of geometric parameters on simplex atomizer performance AIAA J. 42(12), 2408–2415 (2004).
S. Nonnenmacher, M. Piesche, Design of hollow cone pressure swirl nozzles to atomize Newtonian fluids, Chem. Eng. Sci. 55, 4339–4348 (2000).
S. Moon, E. Abo-Serie, C. Bae, Liquid film thickness inside the high pressure swirl injectors: Real scale measurement and evaluation of analytical equations, Exp. Thermal Fluid Sci. 34, 113–121 (2010a).
M. P. Fard, N. Ashgriz, J. Mostaghimi, L. A. Prociw, T. C. J. Hu, Modeling liquid film formation and breakup in an industrial spray nozzle, ILASS America, 15th Annual Conference on Liquid Atomization and Spray Systems, May 14–17, 2002, Madison, Wisconsin.
W. M. Ren, J. F. Nally Jr., Computations of hollow-cone sprays from a pressure-swirl injector, SAE Technical Paper 982610, Society of Automotive Engineers, Warrendale, 1998.
N. Dombrowski, P. C. Hooper, The Effect of ambient density on drop formation in sprays, Chem. Eng. Sci. 17, 291–305 (1962).
Z. Han, L. Fan, and R. D. Reitz, Multidimensional modeling of spray atomization and air-fuel mixing in a direct-injection spark-ignition engine, SAE Technical Paper 970884, Society of Automotive Engineers, Warrendale, 1997.
Z. Han, Z. Xu, S. T. Wooldridge, J. Yi, and G. Lavoie, Modeling of DISI engine sprays with comparison to experimental in-cylinder spray images, SAE Technical Paper 2001-01-3667, Society of Automotive Engineers, Warrendale, 2001.
J. Cousin, H. Nuglisch, Modeling of internal flows in high pressure swirl injectors, SAE Technical Paper 2001-01-0963, Society of Automotive Engineers, Warrendale, 2001.
T. Inamura, H. Tamura, H. Sakamoto, Characteristics of liquid film and spray injected from swirl coaxial injector, J. Propuls. Power 19(4), 632–639 (2003).
D. P. Schmidt, I. Nouar, P. K. Senecal, C. J. Rutland, J. K. Martin, R. D. Reitz, J. A. Hoffman, Pressure-Swirl Atomization in the Near Field, SAE Technical Paper 1999-01-0496, Society of Automotive Engineers, Warrendale, 1999.
P. K. Senecal, D. P. Schmidt, I. Nouar, C. J. Rutland, R. D. Reitz, M. L. Corradini, Modeling high-speed viscous sheet atomization, Int. J. Multiphase Flow 25, 1073–1097 (1999).
J. J. Chinn, An appraisal of swirl atomizer inviscid flow analysis, Part 1: The principle of maximum flow for a swirl atomizer and its use in the exposition and comparison of early flow analyses, Atomization Sprays 19(3), 263–282, (2009a).
J. J. Chinn, An appraisal of swirl atomizer inviscid flow analysis, Part 2: Inviscid spray cone angle analyses and comparison of inviscid methods with experimental results for discharge coefficient, air core radius and spray cone angle, Atomization Sprays, 19(3), 283–308 (2009b).
K. Ranganadha Babu, M. V. Narasimhan, K. Narayanaswamy, Prediction of mean droplet size of fuel sprays from swirl spray atomizers. Proc. ICLASS-82, Madison, Wisconsin, 3–4, 99–106 (1982).
M. M. Elkotb, N. M. Rafat, M. A. Hanna, The influence of swirl atomizer geometry on the atomization performance. Proc. ICLASS-78, Tokyo, 5–1, 109–115 (1978).
N. Dombrowski, D. Hasson, The flow characteristics of swirl (centrifugal) spray pressure nozzles with low viscosity liquids, AlChE J. 15(4), 604–611 (2004).
A. Radcliffe, The performance of a type of swirl atomizer, Proc. Inst. Mech. Engrs 169, 93 (1955).
J. C. Cooke, On Pohlhausen’s method with application to swirl problem of Taylor, J. Aeronaut. Sci., 19(7), 486–490 (1952).
I. Novikov, Atomization of liquids by centrifugal nozzles, Engineers’ Digest (British Edition), 10(3), 72–74 (1949).
P. W. Loustalan, M. H. Davy, P. A. Williams: Experimental investigation into the liquid sheet break-up of high-pressure DISI swirl atomizers, SAE paper 2003-10-27
I-P. Chung, C. Presser, Fluid property effects on sheet disintegration of a simplex pressure-swirl atomizer, J. Propuls. Power 17(1), 212–216 (2001).
S. Boyaval, C. Dumouchel, Investigation on the drop size distribution of sprays produced by a high-pressure swirl injector: Measurements and application of the maximum entropy formalism Part. Part. Syst. Charact. 18, 33–49 (2001).
P. W. Loustalan, M. H. Davy, Preliminary analysis of the near nozzle break-up from a pressure-swirl atomizer using a void fraction technique, presented at 5th International Congress on Direkteinspritzung im Ottomotor (Gasoline Direct Injection Engines), Essen, Germany, 1–2 July, 2003.
P. W. Loustalan, M. H. Davy, P. A. Williams, Experimental investigation into the liquid sheet break-up of high-pressure DISI swirl atomizers, SAE 2003 Transactions, vol. 112, section 4, J. Fuels Lubricants ISBN 0-7680-1451-4, pp. 2124–2134 (2004).
J. Galpin, J. Cousin G. Corbinelli, S. Siveri, A one dimensional model for designing pressure swirl atomizers, SAE Technical Paper 2005-01-2101, Society of Automotive Engineers, Warrendale, 2005.
S. Kim, D. Kim, D. Y. Yoon: Liquid film thickness measurement for swirl injector, J. Korean Soc. Propuls. Eng. 10, 70–77 (in Korean) (2006).
A. Mansour, N. Chigier, Disintegration of liquid sheets, Phys. Fluids A, 2(5), 706–719 (1990).
D. Cooper and A. J. Yule, Waves on the air core/liquid interface of a pressure swirl atomizer, Proc. ILASS-Europe, Zurich, Switzerland (2001).
J.J. Chinn, The analogy between waves on the surface of an aircore of a swirl atomizer and long, shallow water gravity waves, Proc. ICLASS-Europe, Sorrento, Italy, 2003.
N. Dombrowski, R. P. Fraser, A photographic investigation into the disintegration of liquid sheets, Phil. Trans. Roy. Soc. London A, 247(924), 101–130 (1954).
R. P. Fraser, P. Eisenklam, N. Dombrowski, and D. Hasson, Drop Formation from Rapidly Moving Liquid Sheets, AIChE J. 8(5), 672–680 (1962).
G. Taylor, The dynamics of thin sheets of fluid. III. Disintegration of fluid sheets, Proc. Roy. Soc. London A 253(1274), 313–321 (1959).
M. Badami, V. Bevilacqua, F. Millo, M. Chiodi, M. Bargende, GDI swirl injector spray simulation: Combined phenomenological-CFD approach, SAE Paper 2004-01-3005 (2004).
S. Moon, E. Abo-Serie, C. Bae, Liquid film thickness inside the high pressure swirl injectors: Real scale measurement and evaluation of analytical equations, Exp. Thermal Fluid Sci. 34, 113–121 (2010b).
Y. Khavkin, The theory and practice of swirl atomizers, CRC Press, London (2003).
T. Ghazanfari, A. M. A. Elhissi, Z. Ding, K. M. G. Taylor, The influence of fluid physicochemical properties on vibrating-mesh nebulization, Int. J. Pharm. 339, 103–111 (2007).
R. Dhand, Nebulizers that use a vibrating mesh or plate with multiple apertures to generate aerosol, Respir. Care 47, 406–416 (2002).
M. Eslamian, N. Ashgriz, Effect of atomization method on the morphology of spray generated particles, J. Eng. Mater. Technol. 129(1), 130–142 (2007).
K. C. Kesser, D. E. Geller, New aerosol delivery devices for cystic fibrosis, Respir. Care 54(6), 754–768 (2009).
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer US
About this chapter
Cite this chapter
Eslamian, M., Ashgriz, N. (2011). Swirl, T-Jet and Vibrating-Mesh Atomizers. In: Ashgriz, N. (eds) Handbook of Atomization and Sprays. Springer, Boston, MA. https://doi.org/10.1007/978-1-4419-7264-4_33
Download citation
DOI: https://doi.org/10.1007/978-1-4419-7264-4_33
Published:
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4419-7263-7
Online ISBN: 978-1-4419-7264-4
eBook Packages: EngineeringEngineering (R0)