Definition
Machine condition monitoring is the general topic of health monitoring of machines, which includes fault detection and diagnosis as well as fault progress tracking.
Lubricant monitoring is also commonly known as oil analysis, as it most generally involves the analysis of lubricating oil. Analysis of grease is also performed on grease-lubricated bearings and gearboxes.
Wear debris analysis involves the inspection of wear particles contained in a sample of lubricant from the gearbox (oil or grease).
Scientific Fundamentals
Gearboxes used in industry commonly feature enclosed gears to reduce foreign particle contamination and wear, and are oil lubricated. Faults developing inside these types of gearboxes can generally be diagnosed using several methods. The effectiveness of fault detection and diagnosis of each method depends on the defect and the cause of the defect. The monitoring methods typically used for gearboxes are lubricant monitoring, wear debris monitoring, and...
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
W. Bartelmus, Mathematical modelling and computer simulations as an aid to gearbox diagnostics. Mech. Syst. Signal Process. 15(5), 855–871 (2001)
J. Bijwe, A. Garg, O. Gandhi, Reassessment of engine oil periodicity in commercial vehicles. Tribol. Lubr. Technol. 56(1), 23–39 (2000)
E.R. Bowen, V.C. Westcott, Wear Particle Atlas, vol. 1 (Foxboro Analytical, Burlington, 1980)
R. Dalley, Oil/Wear Particle Analysis – A Predictive Maintenance Tool, Predict, Ohio, Techincal Report, 2002
S. Ebersbach, Z. Peng, Expert system development for vibration analysis in machine condition monitoring. Expert Syst. Appl. 34, 291–299 (2008)
S.K. Gebrin, J.C. Fitch, Determining proper oil and filter change intervals: can onboard automotive sensors help. Practicing Oil Analysis Magazine, Jan 2004
ISO, Mechanical vibration – evaluation of machine vibration by measurements on non-rotating parts, part 3. International Standards Organisation, Standard ISO 10816-3:1998, 1998
Y. Liu, Z. Liu, Y. Xie, Z. Yao, Research on an on-line wear condition monitoring system for marine diesel engine. Tribol. Int. 33, 829–835 (2000)
S.A. McInerny, Y. Dai, Basic vibration signal processing for bearing fault detection. IEEE Trans. Educ. 46(1), 149–156 (2003)
G.E. Newell, Oil analysis cost-effective machine condition monitoring technique. Ind. Lubr. Tribol. 51(3), 119–124 (1999)
Z. Peng, T.B. Kirk, Computer image analysis of wear particles in 3 dimensions for machine condition monitoring. Wear 223, 157–166 (1998)
G.W. Stachowiak, Numerical characterization of wear particle morphology and angularity of particles and surfaces. Tribol. Lett. 8–12, 371–389 (1997)
J.I. Taylor, The Vibration Analysis Handbook (Vibration Consultants, Florida, 1994)
L.A. Toms (ed.), Machinery Oil Analysis – Methods, Automation and Benefits, 2nd edn. (Coastal Skills Training, Virginia, 1998)
B.-S. Yang, D.-S. Lim, A.C.C. Tan, Vibex: an expert system for vibration fault diagnosis of rotating machinery using decision tree and decision table. Expert Syst. Appl. 28, 735–742 (2005)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer Science+Business Media New York
About this entry
Cite this entry
Ebersbach, S., Peng, Z. (2013). Fault Diagnosis of Gearbox Based on Monitoring of Lubricants, Wear Debris, and Vibration. In: Wang, Q.J., Chung, YW. (eds) Encyclopedia of Tribology. Springer, Boston, MA. https://doi.org/10.1007/978-0-387-92897-5_1154
Download citation
DOI: https://doi.org/10.1007/978-0-387-92897-5_1154
Publisher Name: Springer, Boston, MA
Print ISBN: 978-0-387-92896-8
Online ISBN: 978-0-387-92897-5
eBook Packages: EngineeringReference Module Computer Science and Engineering