Skip to main content
Log in

Enhancing the efficiency of electrochemical desalination of stones: a proton pump approach

  • Original Article
  • Published:
Materials and Structures Aims and scope Submit manuscript

Abstract

Soluble salts are among the most harmful alteration agents affecting the building materials. In recent years, several researches have been devoted to counteract alterations induced by soluble salts using electrokinetic techniques. However, the applicability of these techniques for conservation purposes remains limited due to adverse side effects, such as the extreme pH values occurring near the electrodes, which can affect the stone to be treated. The decrease in efficiency of the treatment caused by the dominant transport of H+ and OH groups is also an undesired effect. The reduced duration of these treatments due to the drying of the material in contact with the anode also limits their practical use. To overcome these problems, a new electrokinetic design that includes a so called proton pump is presented in this report. This design is based on placing two electrodes in the anodic compartment in order to modulate the net amount of H+ produced. The design was applied to desalinate sandstone samples contaminated with several soluble salts. The application of this new approach allowed us to establish an additional electroosmotic process at the anode, which was able to increase the duration of the treatment. Moreover, the new setup provided improved pH buffer ability due to the generation of OH in the anodic compartment, which increased the effectiveness of the treatment by hindering the entrance of H+ in the porous structure.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  1. Ottosen LM, Rörig-Dalgaard I (2007) Electrokinetic removal of Ca(NO3)2 from bricks to avoid salt-induced decay. Electrochim Acta 52:3454–3463

    Article  Google Scholar 

  2. Ottosen LM, Rörig-Dalgaard I (2009) Desalination of a brick by application of an electric DC field. Mater Struct 42(7):961–971

    Article  Google Scholar 

  3. Ottosen LM, Christensen IV (2012) Electrokinetic desalination of sandstones for NaCl removal—test of different clay poultices at the electrodes. Electrochim Acta 86:192–202. https://doi.org/10.1016/j.electacta.2012.06.005

    Article  Google Scholar 

  4. Ottosen LM, Ferreira CMD, Christensen IV (2010) Electrokinetic desalination of glazed ceramic tiles. J Appl Electrochem 40:1161–1171

    Article  Google Scholar 

  5. Feijoo J, Ottosen LM, Pozo-Antonio I (2015) Influence of the properties of granite and sandstone in the desalination process by electrokinetic technique. Electrochim Acta 181:280–287

    Article  Google Scholar 

  6. Feijoo J, Nóvoa XR, Rivas T, Mosquera MJ, Taboada J, Montojo C, Carrera F (2012) Granite desalination using electromigration. Influence of type of granite and saline contaminant. J Cult Herit 14(5):365–376

    Article  Google Scholar 

  7. Feijoo J, Matyscak O, Ottosen LM, Rivas T, Nóvoa XR (2017) Electrokinetic desalination of protruded areas of stone avoiding the direct contact with electrodes. Mater Struct 50:82. https://doi.org/10.1617/s11527-016-0946-x

    Article  Google Scholar 

  8. Matyščák O, Ottosen LM, Rörig-Dalgaard I (2014) Desalination of salt damaged Obernkirchen sandstone by an applied DC field. Constr Build Mater 71:561–569

    Article  Google Scholar 

  9. Ottosen LM, Christensen IV, Rörig-Dalgaard I (2012) Electrochemical desalination of salt infected limestone masonry of a historic warehouse. In: Proceedings structural faults and repair, Edinburgh 2012

  10. Ottosen LM, Rörig-Dalgaard I, Villumsen A (2008) Electrochemical removal of salts from masonry—experiences from pilot scale. Salt weathering on buildings and stone sculptures. In: Proceedings from the international conference 22–24 Oct 2008, Technical University of Denmark, The National Museum Copenhagen, Denmark

  11. Ottosen LM, Pedersen AJ, Rörig-Dalgaard I (2007) Salt-related problems in brick masonry and electrokinetic removal of salts. J Build Apprais 3(3):181–194

    Article  Google Scholar 

  12. Feijoo J, Rivas T, Nóvoa XR, de Rosario I, Otero J (2017) In situ desalination of a granitic column by the electrokinetic method. Int J Archit Herit. https://doi.org/10.1080/15583058.2017.1370509

    Article  Google Scholar 

  13. Auras M (2008) Poultices and mortars for salt contaminated masonry and stone objects. In: Proceedings of international conference salt weathering on buildings and stone sculptures, 22–24 Oct 2008, The National Museum Copenhagen, Denmark, Technical University of Denmark

  14. Kamran K, van Soestbergen M, Huinink HP, Pel L (2012) Inhibition of electrokinetic ion transport in porous materials due to potential drops induced by electrolysis. Electrochim Acta 78:229–235

    Article  Google Scholar 

  15. Rörig-Dalgaard I (2012) Development of a poultice for electrochemical desalination of porous buildings materials: desalination effect and pH changes. Mater Struct. https://doi.org/10.1617/s11527-012-9946-7

    Article  Google Scholar 

  16. Ottosen LM, Rörig-Dalgaard I (2006) Drying brick masonry by electroosmosis. In: Proceedings from 7th international Masonry conference, London, UK, 2006, pp 31–41

  17. Liu Y, Shi X (2012) Ionic transport in cementations materials under an externally applied electric field: finite element modeling. Constr Build Mater 27:450–460

    Google Scholar 

  18. Li C, Man H, Song C, Gao W (2013) Fracture analysis of piezoelectric materials using the scaled boundary finite element method. Eng Fract Mech 97:52–71

    Article  Google Scholar 

  19. Zhang TY, Gao CF (2004) Fracture behaviors of piezoelectric materials. Theor Appl Fract Mech 41:339–379

    Article  Google Scholar 

  20. Xie T, Fan CY, Liu HT, Zhang TY (2014) Effect of electrostatic tractions on the fracture behavior of a piezoelectric material under mechanical and/or electric loading. Theor Appl Fract Mech 69:6–16

    Article  Google Scholar 

  21. Bertolini L, Bolzoni F, Elsener B, Pedeferri P, Andrade C (1996) La realcalinización y la extracción electroquímica de los cloruros en las construcciones de hormigón armado. Materiales de Construcción. Vol 46 nº 244, octubre/noviembre/diciembre 1996

  22. Castellote M, Andrade C, Alonso C (2000) Electrochemical removal of chlorides Modelling of the extraction, resulting profiles and determination of the efficient time of treatment. Cem Concr Res 30:615–621

    Article  Google Scholar 

  23. Kamran K, Pel L, Sawdy A, Huinink H, Kopinga K (2012) Desalination of porous building materials by electrokinetics: an NMR study. Mater Struct 45:297–308

    Article  Google Scholar 

  24. Tritthart J (2000) Electrochemical chloride removal. A case study and laboratoty tests. In: Page CL, Bamforth PB, Figg JW (eds) Proceedings of the fourth international symposium on corrosion of reinforcement in concrete construction. Society of Chemical Industry, Cambridge, pp 433–447

  25. Bertolini L, Coppola L, Gastaldi M, Redaelli E (2009) Electroosmotic transport in porous construction materials and dehumidification of masonry. Constr Build Mater 23:254–263

    Article  Google Scholar 

  26. Franzoni E (2014) Rising damp removal from historical masonries: a still open challenge. Constr Build Mater 54(2014):123–136

    Article  Google Scholar 

  27. Franzoni E, Bandini S, Graziani G (2014) Rising moisture, salts and electrokinetic effects in ancient masonries: from laboratory testing to on-site monitoring. J Cult Herit 15:112–120

    Article  Google Scholar 

  28. RILEM (Réunion Internationale des Laboratoires d’Essais et de Recherche sur les Matériaux et les Constructions) (1980) Commission 25 PEM. Protection et Erosion des Monuments. Recommandations provisoires. Essais recommandés pour mesurer l’altération des pierres et évaluer l’efficacité des méthodes de traitement. Test No. II. 1: Open porosity and Test II. 2: Bulk and real densities

  29. Benavente D (2002) Modelización y estimación de la durabilidad de materiales pétreos porosos frente a la cristalización de sales. Tesis doctoral 2002 Universidad de Alicante

  30. ICR-CNR- Instituto Centrale do restauro- Commisione Normal (1985) Doc. NORMAL 11/85. Assorbimento d’acqua per capilaritá. Coefficiente di assorbimento capillare

  31. Unhruh J (2001) A revised endpoint for ceramics desalination at the archaeological site of Gordon-Turkey. Stud Conserv 46:81–92

    Article  Google Scholar 

  32. Bourgès A, Vergès-Belmin V (2008) Comparison and optimization of five desalination systems on inner walls of Saint Philibert church in Dijon, France, Salt Weathering on Buildings and Stone Sculptures. In: Proceedings from the international conference 22–24 Oct 2008, Technical University of Denmark, The National Museum Copenhagen, Denmark, pp 29–41

  33. Lubelli B, van Hees RPJ (2010) Desalination of masonry structures: fine tuning of pore size distribution of poultices to substrate properties. J Cult Herit 11:10–18

    Article  Google Scholar 

  34. Golder AK, Samanta AN, Ray S (2007) Removal of Cr3+ by electrocoagulation with multiple electrodes: bipolar and monopolar configurations. J Hazard Mater 141:653–661

    Article  Google Scholar 

  35. Lubelli B, van Hees RPJ, De Clercq H (2011) Fine tuning of desalination poultices: try-outs in practice SWBSS. Limassol, Cyprus

    Google Scholar 

  36. Winkler EM (1997) Stone in architecture: properties, durability, 3rd edn. Springer, Berlin

    Book  Google Scholar 

  37. Feijoo J, Ottosen LM, Nóvoa XR, Rivas T, de Rosario I (2017) An improved electrokinetic method to consolidate porous materials. Mater Struct 50:186

    Article  Google Scholar 

  38. Grundl T, Michalski P (1996) Electrosmotically driven water flow in sediments. Water Res 30(4):811–818

    Article  Google Scholar 

  39. Paz-García JM, Johannesson B, Ottosen LM, Ribeiro AB, Rodríguez-Maroto JM (2013) Simulation-based analysis of the differences in the removal rate of chlorides nitrates and sulfates by electrokinetic desalination treatments. Electrochim Acta 89:436–444

    Article  Google Scholar 

  40. Pel L, Sawdy A, Voronina V (2010) Physical principles and efficiency of salt extraction by poulticing. J Cult Herit 11(2010):59–67

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Jorge Feijoo.

Ethics declarations

Conflict of interest

The authors declare that they have no conflicts of interest.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Feijoo, J., Nóvoa, X.R., Rivas, T. et al. Enhancing the efficiency of electrochemical desalination of stones: a proton pump approach. Mater Struct 51, 100 (2018). https://doi.org/10.1617/s11527-018-1224-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1617/s11527-018-1224-x

Keywords

Navigation