Abstract
A uranium-22.5 atomic% zirconium (U-22.5at.%Zr) alloy was characterized using transmission electron microscopy (TEM) following hot/cold-rolling, and again following a post-roll anneal as part of a novel fabrication process for the alloy. The TEM characterization included selected area electron diffraction, energy-dispersive X-ray spectroscopy (EDS), and bright field imaging. The δ-UZr2 phase fraction was 53.47% ± 0.09% in the rolled foil, substantially larger than the near-equilibrium value, 21.93% ± 0.03% in the annealed foil. Phase fractions and EDS analysis suggest a defect-driven U supersaturation in the δ-UZr2 phase. The lamellae mean random spacing was 0.21 μm ± 0.03 μm in the rolled foil and 0.70 μm ± 0.10 μm in the annealed foil. The δ-UZr2 L3 values were 0.11 μm ± 0.02 μm in the rolled foil and 0.16 μm ± 0.03 μm in the annealed foil. Zirconium inclusions in all foils were face-centered cubic (space group Fm-3 m), reinforcing that further investigations into the formation mechanism(s) and evolution of Zr inclusions are needed.
Graphical abstract
Similar content being viewed by others
Data availability
The datasets generated during and/or analyzed during the current study are not publicly available beyond what is included in this publication due to being included in an ongoing PhD program. However, the data may be made available from the corresponding author on reasonable request.
References
W.J. Carmack, H.M. Chichester, D.L. Porter, D.W. Wootan, Metallography and fuel cladding chemical interaction in fast flux test facility irradiated metallic U-10Zr MFF-3 and MFF-5 fuel pins. J. Nucl. Mater. 473, 167–177 (2016). https://doi.org/10.1016/j.jnucmat.2016.02.019
J.M. Harp, D.L. Porter, B.D. Miller, T.L. Trowbridge, W.J. Carmack, Scanning electron microscopy examination of a Fast Flux Test Facility irradiated U-10Zr fuel cross section clad with HT-9. J. Nucl. Mater. 494, 227–239 (2017). https://doi.org/10.1016/j.jnucmat.2017.07.040
W.J. Williams, D.M. Wachs, M.A. Okuniewski, S. van den Berghe, Assessment of swelling and constituent redistribution in uranium-zirconium fuel using phenomena identification and ranking tables (PIRT). Ann. Nucl. Energy. 136, 107016 (2020). https://doi.org/10.1016/j.anucene.2019.107016
C. Matthews, C. Unal, J. Galloway, D.D. Keiser, S.L. Hayes, Fuel-cladding chemical interaction in U-Pu-Zr metallic fuels: a critical review. Nucl. Technol. 198, 231–259 (2017). https://doi.org/10.1080/00295450.2017.1323535
Y.H. Sohn, M.A. Dayananda, G.L. Hofman, R.V. Strain, S.L. Hayes, Analysis of constituent redistribution in the γ (bcc) U-Pu–Zr alloys under gradients of temperature and concentrations. J. Nucl. Mater. 279, 317–329 (2000). https://doi.org/10.1016/S0022-3115(99)00290-1
G.L. Hofman, S.L. Hayes, M.C. Petri, Temperature gradient driven constituent redistribution in U-Zr alloys. J. Nucl. Mater. 227, 277–286 (1996). https://doi.org/10.1016/0022-3115(95)00129-8
G.L. Hofman, R.G. Pahl, C.E. Lahm, D.L. Porter, Swelling behavior of U-Pu-Zr fuel. Metall. Trans. A 21, 517–528 (1990). https://doi.org/10.1007/BF02671924
R.G. Pahl, D.L. Porter, C.E. Lahm, G.L. Hofman, Experimental studies of U-Pu-Zr fast reactor fuel pins in the experimental breeder reactor-ll. Metall. Trans. A 21, 1863–1870 (1990). https://doi.org/10.1007/BF02647233
N.N. Carlson, C. Unal, J.D. Galloway, Formulation of the Constituent Distribution Model Implemented into the BISON Framework for the Analysis of Performance of Metallic Fuels with Some Initial Simulations Results, Los Alamos Natl. Lab. Rep. LAUR 13-26 (2013)
J.D. Hales, R.L. Williamson, S.R. Novascone, G. Pastore, B.W. Spencer, D.S. Stafford, K.A. Gamble, D.M. Perez, R.J. Gardner, W. Liu, J. Galloway, C. Matthews, C. Unal, N. Carlson, BISON Theory Manual The Equations Behind Nuclear Fuel Analysis, INL/EXT-13-29930 Rev. 3 (2016)
J. Galloway, C. Unal, N. Carlson, D. Porter, S. Hayes, Modeling constituent redistribution in U-Pu-Zr metallic fuel using the advanced fuel performance code BISON. Nucl. Eng. Des. 286, 1–17 (2015). https://doi.org/10.1016/j.nucengdes.2015.01.014
R.R. Mohanty, J. Bush, M.A. Okuniewski, Y.H. Sohn, Thermotransport in γ(bcc) U-Zr alloys: a phase-field model study. J. Nucl. Mater. 414, 211–216 (2011). https://doi.org/10.1016/j.jnucmat.2011.03.028
A.A. Bauer, G.H. Beatty, F.A. Rough, R.F. Dickerson, Constitution of Zirconium-Uranium Alloys Containing Oxygen or Nitrogen, Battelle Meml. Inst. BMI-1187 (1957)
F.A. Rough, A.A. Bauer, Constitution of uranium and thorium alloys, Battelle Meml. Inst. BMI-1300 (1958)
W.J. Williams, M.A. Okuniewski, S.C. Vogel, J. Zhang, An in-situ neutron diffraction study of crystallographic evolution and thermal expansion coefficients in U-22.5at.%Zr during annealing. JOM 72, 2042–2050 (2020). https://doi.org/10.1007/s11837-020-04086-8
Y. Xie, S.C. Vogel, J.M. Harp, M.T. Benson, L. Capriotti, Microstructure evolution of U-Zr system in A thermal cycling neutron diffraction experiment: extruded U–10Zr (wt.%). J. Nucl. Mater. 544, 152665 (2021). https://doi.org/10.1016/j.jnucmat.2020.152665
S. Ahn, S. Irukuvarghula, S.M. McDeavitt, Thermophysical investigations of the uranium–zirconium alloy system. J. Alloys Compd. 611, 355–362 (2014). https://doi.org/10.1016/j.jallcom.2014.05.126
S.T. Zegler, The uranium-rich end of the uranium-zirconium system, Argonne Natl. Lab Metall. Progr. 3.1.3. ANL-6055 (1962)
H. Okamoto, U-zr (uranium-zirconium). J. Phase Equilibria 28, 499 (1992). https://doi.org/10.1007/BF02645399
K.H. Kim, S.J. Oh, S.K. Kim, C.T. Lee, C.B. Lee, Microstructural characterization of U-Zr alloy fuel slugs for sodium-cooled fast reactor. Surf. Interface Anal. (2012). https://doi.org/10.1002/sia.4989
A.C. Lawson, C.E. Olsen, J.W. Richardson, M.H. Mueller, G.H. Lander, Structure of β-uranium. Acta Crystallogr. Sect. B 44, 89–96 (1988). https://doi.org/10.1107/S0108768187009406
M. Akabori, T. Ogawa, A. Itoh, Y. Morii, The lattice stability and structure of delta -UZr2 at elevated temperatures. J. Phys. Condens. Matter. 7, 8249–8257 (1995). https://doi.org/10.1088/0953-8984/7/43/005
S. Irukuvarghula, S. Ahn, S.M. McDeavitt, Decomposition of the γ phase in as-cast and quenched U-Zr alloys. J. Nucl. Mater. 473, 206–217 (2016). https://doi.org/10.1016/j.jnucmat.2016.02.028
A.P. Moore, C. Deo, M.I. Baskes, M.A. Okuniewski, Atomistic mechanisms of morphological evolution and segregation in U-Zr alloys. Acta Mater. 115, 178–188 (2016). https://doi.org/10.1016/j.actamat.2016.05.052
W.J. Williams, M.A. Okuniewski, L. Sudderth, D. Wachs, S. Van Den Berghe, Fabrication and characterization of U-Zr foils for the DISECT project. Trans. Am. Nucl. Soc. 118, 348–351 (2018)
W.J. Williams, C. Hale, E. Sikik, M. Sprenger, G. Borghmans, D.M. Wachs, S. van den Berghe, M.A. Okuniewski, T. Maddock, B. Boer, Thermal-hydraulics and neutronics overview of the DISECT experiment. Trans. Am. Nucl. Soc. 120, 348 (2019)
J.L. McDuffee, G.L. Bell, R.J. Ellis, R.W. Hobbs, M.A. Okuniewski, L.L. Snead, Design, Fabrication, and Testing of Gadolinium-Shielded Metal Fuel Samples in the Hydraulic Tube of the High Flux Isotope Reactor, in: Water React. Fuel Perform. Meet. Fuel/LWR Fuel Perform. Meet., Sendai, Japan (2014), p. 100084
M. Klinge, More features, more tools, more CrysTBox. J. Appl. Crystallogr. (2017). https://doi.org/10.1107/S1600576717006793
E.E. Underwood, Quantitative Stereology for Microstructural Analysis (Springer, Boston, 1970)
G.F. Vander Voort, A. Roósz, Measurement of the interlamellar spacing of pearlite. Metallography 17, 1–17 (1984). https://doi.org/10.1016/0026-0800(84)90002-8
E.R. Boyko, The structure of the δ phase in the uranium–zirconium system. Acta Crystallogr. 10, 712–713 (1957). https://doi.org/10.1107/s0365110x57002492
H. Blank, Fractional packing densities and fast diffusion in uranium and other light actinides. J. Alloys Compd. 268, 180–187 (1998). https://doi.org/10.1016/S0925-8388(97)00604-X
C. Basak, G.J. Prasad, H.S. Kamath, N. Prabhu, An evaluation of the properties of As-cast U-rich U-Zr alloys. J. Alloys Compd. 480, 857–862 (2009). https://doi.org/10.1016/j.jallcom.2009.02.077
M. Kato, K. Morimoto, H. Sugata, K. Konashi, M. Kashimura, T. Abe, Solidus and liquidus temperatures in the UO2-PuO2 system. J. Nucl. Mater. 373, 237–245 (2008). https://doi.org/10.1016/j.jnucmat.2007.06.002
A. Aitkaliyeva, J.W. Madden, C.A. Papesch, J.I. Cole, TEM identification of subsurface phases in ternary U-Pu–Zr fuel. J. Nucl. Mater. 473, 75–82 (2016). https://doi.org/10.1016/j.jnucmat.2016.02.022
Y. Xie, M.T. Benson, J.A. King, R.D. Mariani, J. Zhang, Characterization of U-Zr fuel with alloying additive Sb for immobilizing fission product lanthanides. J. Nucl. Mater. 498, 332–340 (2018). https://doi.org/10.1016/j.jnucmat.2017.10.039
D.E. Janney, T.P. O’Holleran, Zr inclusions in actinide-Zr alloys: New data and ideas about how they form. J. Nucl. Mater. 460, 13–15 (2015). https://doi.org/10.1016/j.jnucmat.2015.01.065
D.E. Janney, J.R. Kennedy, J.W. Madden, T.P. O’Holleran, Crystal structure of high-Zr inclusions in an alloy containing U, Pu, Np, Am, Zr and rare-earth elements. J. Nucl. Mater. 448, 109–112 (2014). https://doi.org/10.1016/j.jnucmat.2014.01.044
I. Manna, P.P. Chattopadhyay, F. Banhart, H.J. Fecht, Formation of face-centered-cubic zirconium, by mechanical attrition. Appl. Phys. Lett. 81, 4136–4138 (2002). https://doi.org/10.1063/1.1519942
H. Zhao, X. Hu, M. Song, S. Ni, Mechanisms for deformation induced hexagonal close-packed structure to face-centered cubic structure transformation in zirconium. Scr. Mater. 132, 63–67 (2017). https://doi.org/10.1016/j.scriptamat.2017.01.034
Acknowledgements
This research was partially supported by the US Department of Energy, Office of Nuclear Energy (NE), under DOE Idaho Operations Office Contract DE-AC07-05ID14517 through a Nuclear Science User Facilities experimental project and the Advanced Fuel Campaign. TEM Characterization took place in the Irradiated Material Characterization Laboratory at Idaho National Laboratory.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
On behalf of all authors, the corresponding author states that there is no conflict of interest.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Williams, W.J., Yao, T., Sudderth, L. et al. Phase identification and morphology in rolled and annealed U-22.5at.%Zr foils. MRS Advances 6, 1037–1042 (2021). https://doi.org/10.1557/s43580-021-00162-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/s43580-021-00162-6