Matter Accretion onto a Conformal Gravity Black Hole

The accretion of test fluids flowing onto a black hole is investigated. Particularly, by adopting a dynamical Hamiltonian approach, we are capable to find the critical points for various cases of black hole in conformal gravity. In these cases, we have analyzed the general solutions of accretion employing the isothermal equations of state. The steady state and spherically symmetric accretion of different test fluids onto the conformal gravity black hole has been considered. Further, we have classified these flows in the context of equations of state and the cases of conformal gravity black hole. The new behavior of polytropic fluid accretion is also discussed in all three cases of black hole. Black hole mass accretion rate is the most important part of this research in which we have investigated that the Schwarzschild black hole produce a typical signature than the conformal gravity black hole and Schwarzschild de-Sitter black hole. The critical fluid flow and the mass accretion rate have been presented graphically by the impact parameters $\beta$, $\gamma$, $k$ and these parameters have great significance. Additionally, the maximum mass rate of accretion fall near the universal and Killing horizons and minimum rate of accretion occurs in between these regions. Finally, the results are compared with the different cases of black hole available in the literature.


Introduction
Einstein's theory of gravity was suggested at the end of 1915 and is still the standard framework for the account of the chrono-geometrical structure and the gravitational fields of spacetime. Despite its certain success to account for a comprehensive observational data [1], the theory is troubled by some important issues that surely point out the entity of new physics. One of these issues is the existence of spacetime singularities in the physically applicable solutions of the Einstein equations.
At a singularity, capability of prediction is lost and the standard physics breaks down. It has been suggested that the issue of spacetime singularities in the Einstein theory of gravity can be resolved by the familiar theory of quantum gravity. Since, the present understanding of physical laws cannot assume a singularity and there are various efforts to solve the singularity issue [2]- [13]. One of the effort to solve the singularity issue has been proposed in [10], where, singularity free black hole (BH) solutions have been proposed in conformally invariant theories of gravity.
Latter on, conformal (Weyl) gravity characterized by a pure Weyl squared action has taken a large amount of curiosity as an alternate theory to Einstein gravity. Every conformal class of the Einstein solution occurs genuinely as a solution to the conformal gravity by the equation of motion and the correspondence of conformal gravity. Mainly, in case of the Neumann boundary condition, conformal gravity can single out an Einstein solution [14,15]. Further, it has been investigated that unlike Einstein gravity, conformal gravity is perturbatively renormalizable in four dimensions [16], on basis of this aspect conformal gravity is more attractive alternative to quantum gravity [17].
Another interesting aspect of conformal gravity appears from cosmology. It is an admitted fact that Einstein5 gravity can explain the physics within the scale of the Solar system satisfactorily, but there are still several unsolved puzzles when tested to a larger scale, such as the disparity with the observations of accelerating universe and galactic rotation curves. Accordingly, anonymous entities, namely dark matter and dark energy, have been proposed to remove the inconsistency issues. However, one may wonder certainly wether it is feasible to modify the nature of gravity to illustrate the physics at a larger scale, while maintaining the appropriate behaviors at the scale of the Solar system. Subsequently conformal gravity permit more general solutions than Einstein gravity. It can yield the effective potential compatible with the observed phenomenon, which designate it as a fascinating modified theory of gravity [18]- [21].
Furthermore, conformal theory and Einstein gravity may share similar metric solutions, while thermodynamic quantities of the BH, such as the mass and entropy depends on the action of the theory rather than the metric. The thermodynamical feature of the conformal theory BH has been investigated in the four-dimensional spacetime in Refs. [22]- [25]. In four-dimensions, there is an important feature that any conformal Einstein metric is automatically a solution of conformal gravity. In this respect, the light rays and test particle orbits can promote the understanding of the physical properties of conformal field equations. Likewise, the motion of light and fluid can be used to classify the conformal spacetime and to highlight its features. The study of geodesic motion provides some information about the spacetime characteristics of the BHs [26]. The solutions of the geodesic equation of motion with the same mathematical structure but different spacetime has been discussed in [27,28]. The Jacobi inversion issues have been solved [29,30] with Schwarzschild anti de-Sitter spacetime and next studied in [31,32]. Some authors investigated the physical meaningful study of conformal gravity theory [33]- [35]. The work for on the geodesics study in this theory have been discussed in [36]. Sultana et al. [37] have studied the applications of geodesic solutions in the theory of conformal gravity.
The effects of electromagnetic fields around compact stars in conformal gravity have been explored by Toshmatov et al. [38]. The observational test of conformal gravity has been done by using X-ray observations of supermassive BHs Ref. [39]. Also, Toshmatov et al. [40,41] have discussed explicitly, the energy conditions and scalar perturbations around BHs in conformal gravity.
Recently, Haydarov et al. [42] have studied the motion of magnetized particle around BHs in conformal gravity near the external magnetic fields. In view of the above advancements in conformal theory of gravity, there is a blank space in the literature that no work has been done for the accretion onto BH in this theory and we are capable to honestly fill this gap in the present paper. For this, we plan to investigate spherically symmetric accretion onto BH in conformal theory of gravity.
In astronomical observations, accretion causes to increase the mass of gravitating bodies and also the angular momentum as well. The accretion is used to explain the inflow matter towards the central gravitating bodies. It has the significant status and a very special importance in the astronomy and the cosmology. The most of the astrophysical bodies increase substantially in mass due to accretion. The determination of mass accretion rate for astrophysical bodies can provide a strong evidence for the presence of compact objects. In general, the mass of gravitating bodies increases due to accretion onto it, but when phantom fluid accretes onto a gravitating object then its mass decreased [43,44].
The accretion onto celestial objects was started by Hoyle and Lyttleton [45]. Later on, the study of Hoyle and Lyttleton was extended by Bondi and Hoyle [46] for gaseous dust cloud falling onto a compact object. The transonic-hydrodynamics accretion for adiabatic fluid onto gravitating object was investigated by Bondi [47] in Newtonian gravity, he found the existence of only one saddletype sonic point in an adiabatic flow . The general relativistic model of spherically symmetrically accretion onto Schwarzschild BH was investigated by Michel [48] that has been further extended by many authors [49]- [54].
It has been observed [56], that the theory of GR is facing a large number of challenges that has led to the introduction of the dark matter and dark energy with ordinary matter [57]. Accretion of BHs in the presence of dark energy studied has been studied by Babichev et al [58]. They have examined the behavior of different types of dark energy in the locality of Schwarzschild and electrically charged BHs. Debnath [59] has studied the Babichev et al. [58] and proposed a study of spherically symmetrically accretion onto some generalized BHs. Moreover, accretion of phantom fluid onto BHs has been formulated in [60]- [62].
The BHs, planets and stars are formed due to accretion during the evolutionary phases of dusty plasma clouds. The existence of supermassive BHs in the center of galaxies intimate that these BHs could have been developed through the accretion. The accretion onto higher dimensional BHs [63] and string cloud model [64] has been investigated in detail and it has been predicted that the matter accretion rate decreases with the increase of dimension of spacetime. It has been shown [64] that accretion rate increases by the increase of the string cloud parameter. Furthermore, many authors [65]- [68] have analyzed the radial flows of perfect fluids and dark energy onto some BHs in modified theories of gravity. Sharif and his collaborators [69]- [75] have studied the phantom accretion onto charge de-Sitter and string BHs.
Another approach to the BH accretion comes from the modified theories of gravities where, several authors have investigated the radial flows on static BHs [76], quantum gravity corrections to accretion onto BH [77], accretion onto a non-commutative BH [78] and accretion onto BH in scalar-tensor-vector gravity [79]. The accretion of cyclic and heteroclinic fluid flows near f (R) and f (T ) theories BHs have been explored in [80,81]. The Hamiltonian approach, has been used by several authors [82]- [87] to determine the maximum accretion flows of perfect fluid.
The purpose of the present research is to study the spherically symmetrically fluid accretion onto conformal gravity BH. We have analyzed the accretion process by applying the Hamiltonian approach (as developed in [86,87]). The accretion of various forms of fluids (such as ultra-relativistic fluid, radiation fluid, ultra-stiff fluid and sub-relativistic fluid) onto conformal gravity BH would provide the possibility of testing the conformal theory in strong gravity regimes. From the effects of conformal gravity BH parameters γ, k and β, we have investigated that the consequences of fluid accretion in case of conformal gravity BH are more significant and metric of the conformal gravity BH is more generalized as compared to BH metrics available in literature in the context of accretion flows.
The setting of this research is as follows: The conformal gravity BH solution with different values of parameters is presented in section 2. In section 3, we have formulated the horizon structure of conformal gravity BH. Section 4 is dedicated to calculate the conservation laws and general formulism for accretion onto conformal gravity BH. The sound speed at the critical points is formulated in section 5. Further, in the subsequent sections, we have applied the Hamiltonian approach for the accretion with isothermal equation of state. In section 6, we have analyzed the nature of flow around conformal gravity BH for various cases of fluids such as ultra-stiff fluid, ultra-relativistic fluid, radiation fluid and sub-relativistic fluid. The polytropic fluid accretion has been discussed explicitly in section 7. The mass accretion rate for various BHs is formulated in section 8. Finally, we concluded the results of the paper in section 8. Here, we have used the signature of metric as (−, +, +, +) and the geometric units G = c = 1.

Conformal Gravity Black Hole
According to conformally invariant theory of gravity, the action is invariant with respect to general conformal transformations and coordinate transformations. Let a regular quantity be singular in a reference frame but not in alternative one due to a conformal transformation, the singularity is not physical but exact an artefact of the reference frame. Here, we have a conformal singularity, which is related to the preference of the conformal factor but not an intrinsic singularity of spacetime. It is noted that one cannot apply the same mathematical mechanism for studying spacetime singularities in conformal gravity and Einstein gravity. For instance, the Kretschmann scalar and the scalar curvature are not invariant with respect to conformal transformations, so they are not linked with any intrinsic property in conformal gravity spacetime. Therefore, the general action of conformal theory can be developed by on the basis of following four points.
• It is a completely covariant advancement theory of General Relativity.
• It is an additional symmetry principle or local conformal invariance and the existence of the symmetry principle prevents the Einstein Hilbert action and cosmological term in the action.
• The conformal transformation of the theory is g µν → Ω 2 (x)g µν .
• The conformal gravity action is defined in terms of Weyl tensor C ηλµν and a coupling constant α g , which is a dimensionless constant and this allows the conformal gravity theory is a quantum theory of gravity. The action of conformal gravity contributes to fourth order of equation of motion in the presence of ghosts. The fourth order equations of motion involve more constants of integration and also solutions contain more parameters.
The action and the field equations of metric are given by where α g is the pure dimensionless constant and C ηλµν represents the Weyl tensor. The following gravitational field equations are achieved by varying the action (1) in the presence of W µν and the energy momentum tensor T µν given by Therefore, the exact vacuum solution is given by the metric The above metric can be written as Here A(r) > 0, while β, γ and k are constants of integration. The choice γ = 0 yields the Schwarzschild-de Sitter solution and γ = k = 0 the Schwarzschild solution.
If all three parameters of BH γ, β and k are not equal to zero, the BH can be termed as case 1, which is a general case. If we impose γ = 0, A(r) = 1 − 2β r − kr 2 (Schwarzschild-de Sitter solution), which is the case 2. We obtained the Schwarzschild solution A(r) = 1 − 2β r for γ = k = 0, which is the case 3. In all cases β is considered as mass of BH and k behaves as cosmological constant [18,19].

Horizon structure
In this section, we study the horizon structure of the conformal gravity theory BH. For the metric function A(r) given in Eq. (8), the effect of the parameters β, γ and k is significent. It is well known that the conformal gravity BH appears to describe a massive body fixed in a conformally flat space. The conformally flatness of the spherically symmetric space is characterized by the absolute influence of the massive body. As aforementioned by the analysis of Weyl tensor, the shattering of conformally flatness is evident at infinity. In view of the above arguments, the conformal theory BH has the following structure: • When one take the mass function β = 0, the conformally flat solution is obtained [18].
• When β = 0, the coefficient of the 1 r term disappear as r approaches to infinity. The nonvanishing contribution exists due to the constant term −3βγ.
• For the line element, the influence of the Newtonian term 1 r , which should reign at small lengths with γr term entity the further dominant one at larger lengths [18]. In the radial distance g rr = 0 or A(r) = 0, one would have an event horizon. Figure 1 (left panel) has the following key points:

No Horizon Event Horizon
• We have two horizons (green curve) for γ = 0.70.
• We have no horizons (black curve) for γ = 0.95. Figure 1 (right panel) has the following key points: • We have two horizons (green curve) for β = 0.73.
• We have no horizons (black curve) for β = 0.96. Figure 1 (bottom panel) has the following key points: • We have two horizons (green curve) for k = −0.0001.
• We have one horizon (red curve) for k = −0.17.
• We have no horizons (black curve) for k = −1. Figure 2 left panel presents the Schwarzschild-de Sitter BH horizon structure for γ = 0, there exists only one event horizon with the variations of β. According to the right panel of Fig. 2, one gets Schwarzschild solution for γ = 0 and k = 0, there is only one event horizon. When we take β = 0, the Schwarzschild solution is flat (see black curve). It is noted that when all parameters appearing from conformal gravity are set equal to zero then the solution is conformally flat [18].

Spherically Symmetrically Accretion
The study of spherical accretion onto BHs describes the movement of fluid near the event horizon. We assume two important laws that fully characterized the spherically accretion of perfect isotropic fluid. One is the law of conservation of mass and the other is the law of conservation of energy. We begin by the equation of continuity defined by Rezzolla and Zanotti [88] in the following form where J µ = nu µ and n is the proper baryon number density and u µ = dx µ dτ is the velocity-fluid. Now, we introduce the matter the energy-momentum tensor as T µν = (̺ + p)u µ u ν + pg µν , with ̺ as the energy density, p is the pressure and u µ = dx µ dτ = (u 0 , u 1 , 0, 0) is 4-velocity of the particle. The conservation of energy momentum for perfect fluid is given by The fluid follows the normalization condition u µ u µ = −1, which leads to Using the equatorial plane (θ = π/2), the mass conservation Eq.(9) can be written as after integrating, it gives where, c 1 is an integration constant. For accretion, the fluid velocity is u r < 0 and therefore c 1 < 0 in above equation. We define the enthalpy as h(̺, p, n) = ̺+p n . For smooth flow, Eq. (10) can be written as Moreover, if the entropy of a moving fluid along a streamline is constant, then the fluid flow should be an isentropic [80]. So, above equation reduces to The zeroth component of above equation yields after integrating above equation gives where c 2 is constant of integration. Thus, Eqs. (14) and (18) are important for the critical flow of fluid onto the considered BH.

Sound Speed at Sonic Points
The sonic point (critical point) is a point, where the velocity of the moving gas must be equal to the local sound speed. In view of this definition, the maximum accretion rate occurs, when fluid passes through the critical point. Here, we are interested to calculate the critical points of the flow and the sound speed at these points, for this, we assume the barotropic fluid with constant enthalpy that is h = h(n). Therefore, the equation of state for this flow becomes [89] dh h = a 2 dn n , where a represents the local sound speed. Also, above equation gives ln h = a 2 ln n. Using Eqs. (11), (18) and (19), we get Now, for critical points, both sides of the above equation must be equal to zero. So, the sound speed at the critical point becomes where the quantities, a c , r c and u c designate the sound speed, distance and velocity of the fluid at the critical point, respectively. Therefore, another result of Eq. (20) at the critical point is given by From Eqs. (21) and (22), one can get the radial velocity at the critical points, which is given by Using Eqs. (12), (22) and (23), we obtain Thus, the sound speed is given by Thus, one can obtain the critical points as (r c , ±u c ) using Eqs. (23) and (25), if one has the value of sound speed.

Isothermal Test Fluids
At very high speed, the fluid does not transfer its the heat to the surrounding, so it is the the adiabatic situation , we introduce a 2 = dp d̺ to solve analytically the equations of motion of the fluid. For the analytical solutions, we define an important equation of state p = ω̺ with the energy density ̺ and equation of the state parameter ω. Here, 0 < ω ≤ 1 as constrained in [66]. After combining p = ω̺ with a 2 = dp d̺ , one gets, a 2 = ω. Applying the first law of thermodynamics Integrating the above equation from the critical point to any point inside the fluid, we get With the help of p = ω̺, the above Eq. (27) gives Using enthalpy h(̺, p, n) = ̺+p n in the above relation, we obtain The following relation with constant of integration By using Eqs. (29) and (18), we get where c 3 = C 2 n 1−ω c (ω+1)̺c . Combining Eqs. (26) and (11), we get The Hamiltonian can be defined as [80,81] where v ≡ dr f dt , is the three-dimensional speed for the radial motion of particle in the equatorial plane. Thus, we have Further, by using (23) and (24) the critical points can be obtained as follows Consequently, for the classification of fluid flow, the generalized expression (32) can be solved numerically by choosing the any value of ω satisfying 0 < ω ≤ 1. In the coming subsections, we have assumed the four kinds of fluid such as, ultra-stiff fluid, ultra-relativistic fluid, radiation fluid and sub-relativistic fluid.
6 Analysis of Various Cases of Black Holes 6.1 Case 1.
The first and general case of the line element is a conformal BH, which is given by Eq. (8). There are four subcases of case 1: 6.1.1 Hamiltonian for ultra-stiff fluid (ω = 1): In this case, we have p = ̺, from the equation of state and critical point and event horizon are equal, that is r h = r c , with the condition A c = 0, which can be easily obtained by using Eqs. (34) and (35). The Hamiltonian (32) for this type of fluid takes the form 6.1.2 Hamiltonian for ultra-relativistic fluid (ω = 1/2): In ultra-relativistic fluids, the relation between energy density (̺) and pressure (p) is p = ̺/2, with ω = 1/2 in the equation of state, it means that the energy density is grater than the pressure in this case. From Eqs. (34) and (35), we get r c A ′ c − 4A c = 0, which gives The real solution of above equation is where Using r c from the above expression, we get v c from Eq. (34) and have two critical points as (r c , ±v c ). The Hamiltonian (32) reduces into the form: The graphical behavior can be seen between v and r c with particular choice of H = H c .

Hamiltonian for radiation fluid (ω = 1/3):
For radiation fluids, the equation of state takes the form p = ̺/3). Using Eqs. (34) and (35), The critical solutions are The Hamiltonian (32) in this case is given by 6.1.4 Hamiltonian for sub-relativistic fluid (ω = 1/4): For such fluids, the equation of state obeys the form p = ̺/4. This form shows the energy density exceeds than the isotropic pressure. Using Eqs. (34) and (35), After determining the critical points, the Hamiltonian is given by

Case 2
The second case of the line element is known as Schwarzschild-de Sitter BH, the Hamiltonian and critical points for such BH can be obtained by taking γ = 0 in Case 1.

Case 3
The third and final case of the line element is called Schwarzschild solution, the Hamiltonian and critical points for such BH can be obtained by taking γ = k = 0 in Case 1.
1. Ultra-stiff fluids (ω = 1): Figure 3 signifies the velocity v of moving fluid versus the radius r corresponding to various cases of BH. The fluid motion occurs in the two regions, upper curves show the region v > 0 whereas the lower curves for the region v < 0 for the three cases of BH. It is noted here that the critical point is always equal to the critical horizon for ultra-stiff fluid. Moreover, the critical points are closer in conformal gravity BH and Schwarzschild de-Sitter BH as compare to the Schwarzschild BH. It is observed that the critical points are close to the singularity in conformal gravity BH and Schwarzschild de-Sitter BH than the Schwarzschild BH. , the behavior of curves is seen through the CPs (r c , ±v c ). It is shown that the fluid outflow starts from the horizon and induces by the high pressure. The curves behaviors shown in Fig. 4 are not all physical. For increasing radius r, the region must be v > 0 (positive), while for decreasing radius the region must be v < 0 (negative). The flow in the yellow, magenta, orange and purple curves is unphysical. The fluid flow increases as v > 0 and decreases the radius, so there is neither fluid outflow nor an accretion. Only the red curves display the supersonic accretion in the region v > v c and subsonic accretion in the region v < v c . It is also noted here that the fluid elements are closer to Case 1 and Case 2 instead of Case 3, respectively. Consequently, it is viewed that the CPs are closer for Case 1 and Case 2 as compare to Case 3, respectively. It is revealed here that the fluid experiences the particle emission or fluid outflow for v > 0 while fluid accretes for v < 0. Specially, in Case 3 (Schwarzschild case), only the orange curve represents the unphysical while the other four color curves show the physical behavior which is clear as compare to Case 1 and Case 2.
Further, Fig. 4 shows the following four key points.
• We notice, the subsonic/supersonic accretion occurs in the ranges −v c < v < 0 and −1 < v < −v c , whereas supersonic/subsonic fluid outflows for v c < v < 1 and 0 < v < v c , respectively.
• The emission of particles for v > v c and thus purely supersonic accretion for v < −v c .
• The subsonic outflow followed by the subsonic accretion with v c > v > −v c .
• The upper plot shows the supersonic outflow followed by subsonic motion, while the lower plot shows the subsonic accretion followed by supersonic accretion. Consequently, we observe that the starting point of the fluid outflow is at horizon due to its very high pressure which influences to divergence and as a result, the fluid with its own pressure flows back to spatial infinity [91]. We also observe from Fig. 4, the supersonic accretion (fluid outflow) followed by subsonic accretion (fluid inflow) stops inside the horizon and it does not give support for the claim that "the flow must be supersonic at the horizon" [92]. It means that for conformal gravity BH, Schwarzschild de-Sitter BH and Schwarzschild BH the flow of the fluid is neither supersonic nor transonic near the horizon [93,94]. These results agree with fine tunning and instability issues in dynamical systems. The stability issue is connected to the nature of the saddle points (CPs (r c , v c ) and (r c , −v c )) of the Hamiltonian system. The analysis of stability could be done by using Lyapunov's theorem or linearization of dynamical system [95,96,97] and their variations [98]. Another stability issue is the outflow of the fluid starts in the surrounding of horizon under the effect of pressure divergent. This outflow is unstable because it follows a subsonic path passing through the saddle point (r c , v c ) and becomes supersonic with speed approaches the speed of the light. The point (r = r h , v = 0) can be observed as attractor as well as repeller where solution curves converge and diverge in the cosmological point of view [92,98].
3. Radiation fluids (ω = 1 3 ): The rule played by the different parameters for the velocity profile v versus radius r is important in Fig. 5. The settlement of curves corresponding to H = H c is colored Orange. The Magenta and Yellow curves relate to H < H c and the Purple and Red plots to H > H c . In Fig. 5, we see the supersonic outflows of the fluid in the range v c < v < 1. In this flow, we observe that the orange curve exactly passes through the critical point (r c = 3.0) as compared to other curves. The critical points are very close in Case 1 and Case 2 than Case 3. So, the orange, magenta and yellow curves are purely supersonic outflows for (v > v c ) and these curves pass through the critical speed Fig. 6 in Schwarzschild BH. One can see the similar behavior for conformal gravity BH and Schwarzschild de-Sitter BH. The vertical lines which are closer to the horizon are unphysical for H > H c . 4. Sub-relativistic fluids (ω = 1 4 ): We have analyzed the accretion of the sub-relativistic fluid ω = 1 4 for the conformal gravity BH. We have plotted the sub-relativistic fluid motion versus the radius in Fig. 6. This figure shows that all the solution curves are not passing through the critical velocity, which confirms to the new solution in Schwarzschild BH. Since, the critical velocity is located at v c ≈ 0.5 but the maximum speed in case of Schwarzschild BH approaches to v = 0.06. So, there is no accretion flow around Schwarzschild BH for sub-relativistic fluid. We have observed the supersonic accretion at v > v c followed by subsonic accretion at 0 < v < v c which stop at the horizon for conformal gravity BH and Schwarzschild de-Sitter BH. Furthermore, we have the supersonic accretion with v < −v c followed by the subsonic accretion at 0 < ν < −ν c .

Polytropic Fluids Accretion
The polytropic equation of state [80,81,82] is where Γ and α are constants. One can consider the general constraint α > 1 for an ordinary matter. The specific enthalpy can be define [82] as Three dimensional sound speed with the help of enthalpy is given by where U = γαn α−1 . Another useful result can be obtained with the help of speed of sound, which is given by and therefore where and X > 0 is a constant. From the above result, it is clear that the constant X depends on the BH parameters and also on the test fluids. The final form of Hamiltonian system can be obtained by putting Eq. (50) into (32), which is given by

Hamiltonian for Schwarzschild BH
It is analyzed from the Hamiltonian results that dA(r) dr > 0 for all r. Adopting the technique in [80,81,82], one can get the following relation that the critical flow for conformal BH, Schwarzschild de-Sitter BH and Schwarzschild BH starts from subsonic accretion and then follows the supersonic accretion escaping the saddle point (sonic point) and ends at the Killing horizon. The supersonic accretion begins from the region of Killing horizon and ends at the subsonic accretion as r approaches to infinity. It has been observed that the accretion behavior of various BHs is different at critical points of polytropic test fluids case. Also, it has been observed that at the trajectory of conformal BH, the critical points are closer (see red curve), for Schwarzschild de-Sitter BH, the critical points are also distant (see red curve) and for Schwarzschild BH, the critical points are also distant (see red curve). In all these cases, the trajectories do not pass through the saddle point (sonic point).

Black Hole's Mass Accretion Rate
The mass accretion rate of BH is an important aspect in the study of accretion, for this purpose, we have calculated the accretion rate corresponding to A(r). Specially, we have observed the effects of radius on the accretion rate. Generally, mass accretion rate is the area times flux at the boundary of BH and is denoted byṀ , it evaluates the BH mass per unit time. Here, we consider the general expression for the mass accretion rate asṀ | rh = 4πr 2 T r t | rh [90], the energy momentum tensor for perfect fluid can be as used. Since, the dynamical system is conserved ∆ µ J µ = 0 and ∇ ν T µν = 0. Thus, due to this conserved system, Eqs. (14) and (18) give where L 0 is the constant. Now, by taking the continuity equation (relativistic energy flux) and the equation of state p = p(̺), we get After integrating, we obtain where L 1 is the constant of integration and ̺ ∞ represents the fluid density at infinity. Here, the minus is taken due to u < 0. Dividing Eq. (58) with (60), we get where L 3 is a constant. At infinity, ). The problem is spherically symmetrically static at equatorial plane, so, the mass flux equation ∇ µ J µ = 0 takes the form Where L 2 is an integration constant. Dividing the Eq. (58) with (62), we get where L 4 = (̺∞+p∞) n∞ . Using Eq. (58), the mass of BH takes the following forṁ Further, it takes the formṀ = 4πL 1 (̺ ∞ + p(̺ ∞ )).
Above equation gives the valid result for any nature of fluids. Thus, we havė Assuming the isothermal equation of state (p = ω̺), which implies that (̺ + p) = ̺(1 + ω). Then, using the Eq. (60), it leads us to By the expression of ̺ in Eq. (58) one can obtain the following general equation It can be solved for fluid velocity u with any value of ω. One can calculate the energy density ̺ by using u with ω. Exact solution for ultra-stiff fluids ω = 1: By assuming ω = 1 in Eq. (63) and (67), one can calculate the radial velocity and energy-density of ultra-stiff fluids, that is also the energy density is given by From Eqs. (66) and (70), the mass accretion rate of conformal gravity BH can obtained in the following formṀ Similarly, following the same method, we can find the mass accretion rate for Schwarzschild de-Sitter and Schwarzschild BHṡ In Fig. 8, we plot the mass accretion-rateṀ versus the radius r for aforemention BHs in ultra-stiff fluid, other parameters γ, k and β are taken as fixed. In the left panel (conformal gravity BH) the accretion rate is increased by decreasing the parameter γ. It has been noted that the maximum accretion rate occurs for overlapping the critical radius in the presence of different values of γ. • β = 0.9, corresponding to r ≈ 3.156 • β = 1.0, corresponding to r ≈ 3.956 The mass accretion rate of Schwarzschild BH is increased by increasing the mass function (β). Hence, we conclude that the mass of Schwarzschild BH is larger as compare to conformal gravity BH and Schwarzschild de-Sitter BH. Also, it is concluded that the conformal parameters are critically important for the maximum accretion rate in ultra-stiff fluids.
Exact solution for ultra-relativistic fluids ω = 1/2: By assuming ω = 1/2 in Eqs. (63) and (67), we calculate the radial velocity and the energy-density of the radiation fluids, that is 1. The mass accretion rate of conformal gravity BH iṡ

The mass accretion rate of Schwarzschild de-Sitter BH iṡ
3. The mass accretion rate of Schwarzschild BH iṡ In Fig. 9, we plot the mass accretion-rate (Ṁ ) versus the radius (r) for aforemention BHs in ultra-relativistic fluid. The left panel (conformal gravity BH) shows that the accretion rate is decreasing for larger value of r, that isṀ = 7000 for r = 0.8 and Killing horizon is at r KH ≈ 0.8 whereas the universal horizon is at r U H ≈ 0.1. The accretion rate is increasing for smaller values of the radius, that isṀ > 8000 for r ≃ 0.65 and the Killing horizon is at r KH ≈ 0.65 whereas the universal horizon is at r U H ≈ 0.2. We can say that the mass of the conformal gravity BH decreases whereas the radius increases, on the other hand the accretion rate is an increasing function of radius. In this case, the critical points are overlapping at the universal horizon. This implies that the mass of Schwarzschild de-Sitter BH decreases whereas the radius increases, on the other hand the accretion rate is an increasing function of radius in the presence of cosmological constant k. Now, the mass of Schwarzschild BH occurs in the bottom panel where we observe the maximum accretion rate acquire for smaller radius. The critical points are overlapping at the universal horizon but these points are away from the killing horizon in the presence of mass function β. Four key points are observed for the Schwarzschild BH: • β = 0.7, corresponding to r U H ≈ 0.135, r KH ≈ 0.65.
The accretion rate of Schwarzschild BH is increasing with the decreasing values of radius. So, it is a decreasing function of r. Hence, we conclude that the mass of Schwarzschild BH is larger as compare to conformal gravity BH and Schwarzschild de-Sitter BH.
Exact solution for radiation fluid ω = 1/3: By assuming ω = 1 in Eqs. (63) and (67), we calculate the radial velocity and the energy-density The energy density of the fluid is given by The general form of the mass of BH is given bẏ 1. The mass accretion rate of conformal gravity BH iṡ M = 8πL 2. The mass accretion rate of Schwarzschild de-Sitter BH iṡ M = 8πL In Fig. 10, we plot mass accretion-rateṀ versus the radius r for aforemention BHs for radiation fluid with the parameters γ, k and β. The left panel (conformal gravity BH) shows that the accretion rate is decreasing for smaller values of r, that is the red curve shows the minimum accretion rate between the universal and Killing horizon. It is noted that the maximum accretion rate occurs at the universal, but far from the Killing horizon. It is the increasing function of the radius in the presence of γ. The red curve in the right panel depicts the minimum accretion rate at the universal and the Killing horizon for Schwarzschild de-Sitter BH in the presence of cosmological constant k. It is noted here that the accretion rate increases for smaller values of k and we can see the maximum accretion rate near r ≈ 1.08, 0.82, 0.75, 0.69 for k = −1.0, −1.5, −2.0, −2.5, respectively. It is the decreasing function of radius that is mass increases when radius decreases.
We note that for Schwarzschild BH, the range of the maximum accretion rate is between the radius 0.5 to 0.6, for larger value of β = 4. It is also the decreasing function of the radius that is accretion rate increases whereas the radius decreases. So, four key points are observed for the Schwarzschild BH: • β = 1.0, corresponding to r U H ≈ 0.4, r KH ≈ 1.0.
The mass accretion rate of Schwarzschild BH is increasing and the radius decreases for increasing values of the mass function. Hence, we conclude that the mass of Schwarzschild BH is larger as compared to conformal gravity BH and Schwarzschild de-Sitter BH.
We plot mass accretion-rate (Ṁ ) versus the radius (r) for aforemention BHs in the case of sub-relativistic fluid with particular values of conformal parameters γ, k and β, as shown in Fig.  11. The left panel (conformal gravity BH) shows that the accretion rate is decreasing for larger values of γ. One can see the maximum accretion rate at r ≈ 0.87 for γ = 0.4, r ≈ 0.82 for γ = 0.3, r ≈ 0.76 for γ = 0.2, r ≈ 0.69 for γ = 0.1. While, the mass decreases but the radius increases in this case between the universal and Killing horizon. The red curve in the right panel depicts the maximum accretion rate between the universal and Killing horizon for Schwarzschild de-Sitter BH in the presence of cosmological constant k. It is noted here that the accretion rate decreases for smaller values of k and we can see the maximum accretion rate near r ≈ 0.69, 0.82, 0.92, 1.0 for k = −1.0, −1.5, −2.0, −2.5, respectively. Now, the mass of Schwarzschild BH is given in the bottom panel where we observe the maximum accretion rate for smaller radius between the universal and Killing horizons (see red curve). The maximum accretion rate occurs between r ≈ 0.2 to r ≈ 0.4. While, the minimum accretion rate occurs at the Killing horizon in the bottom panel. We have noted that the minimum accretion rate is between r ≈ 0.2 to r ≈ 1.0 for the larger value of β = 4.0.
Four key points are observed for the Schwarzschild BH: • β = 1.0, corresponding to r U H ≈ 0.22, r KH ≈ 0.40.
The mass accretion rate of Schwarzschild BH decreases with the increases of radius for the various values of the mass function.

Conclusion
In this paper, we have investigated the spherically symmetric accretion around the conformal gravity BH, with four kinds of fluid as ultra-stiff fluid, ultra-relativistic fluid, radiation-fluid and sub-relativistic fluid by using the Hamiltonian approach. It is demonstrated that the energy density is always equal to pressure in ultra-stiff fluids. In this case, it has been observed that supersonic as well as subsonic accretion flow would exist for the particular values of the parameters. The critical radius in Schwarzschild BH is larger than the conformal gravity BH and Schwarzschild de-Sitter BH. The energy density is double of the pressure for ultra-relativistic fluid and there exists a supersonic flow, which is followed by subsonic flow. The fluid flow around Schwarzschild BH for ultra-relativistic fluid is entirely different as compared to conformal gravity BH and Schwarzschild de-Sitter BH. The 3D-speed v is very small but the radial distance is larger for Schwarzschild BH as compare to conformal gravity BH and Schwarzschild de-Sitter BH. It is also noted that the critical radius is very close to the horizon for Schwarzschild BH as compare to conformal gravity BH and Schwarzschild de-Sitter BH for ultra-relativistic fluid (see Fig.(4)). The nature of radiation-fluid and sub-relativistic fluid in which the energy density is greater than the pressure is similar for v > v c . A very simple behavior has been observed for the radiation-fluid that is only supersonic flow exists for Schwarzschild BH while subsonic accretion exists for conformal gravity BH and Schwarzschild de-Sitter BH. Further, for sub-relativistic fluid, the flow around Schwarzschild BH is absolutely closer to ultra-relativistic fluid that is the critical radius is closer to the horizon as compared to conformal gravity BH and Schwarzschild de-Sitter BH. The 3D speed for radial motion is very small in Schwarzschild BH as compared to conformal gravity BH and Schwarzschild de-Sitter BH.
In addition, we have explored the results of mass accretion rateṀ , radial velocity u and the energy density ̺ corresponding Schwarzschild BH, conformal gravity BH and Schwarzschild de-Sitter BH. We have investigated the mass accretion rate with four types of fluid around conformal gravity BH, Schwarzschild de-Sitter BH and Schwarzschild BH which is shown in Figs. (8)(9)(10)(11). The Schwarzschild BH acquires the higher accretion rate as compare to conformal gravity BH and Schwarzschild de-Sitter BH for ultra-stiff fluids. The mass accretion rate is smaller in Schwarzschild de-Sitter BH than the conformal gravity BH and Schwarzschild BH for the ultra-relativistic fluid, radiation-fluid and sub-relativistic fluid. It is concluded that the maximum mass accretion rate occur for conformal gravity BH atṀ > 8000 versus (r ≤ 0.8) for ultra-relativistic fluid. The maximum mass accretion rate for Schwarzschild de-Sitter BH mass occurs atṀ > 2500 versus (r ≤ 1.0) for ultra-relativistic fluid. Similarly, the maximum mass accretion rate for Schwarzschild BH occurs atṀ > 8000 versus (r ≤ 0.8) for ultra-relativistic fluid.
Further, we have discussed the ultra-stiff, ultra-relativistic, radiation and the sub-relativistic fluids with the equation of state which helps to identify that what kind of fluids is accreting onto the BH. Moreover, critical points and conserved quantities have been found for these fluids. The behavior of accreting fluid has been discussed as subsonic and supersonic according to equation of state. We have compared the fluid flow for all models and observed that the fluid flow and CPs are closer to Case 3 instead of Case 2 and 1, respectively.
It has been analyzed that the subsonic accretion is followed by the supersonic accretion inside the BH horizon and it does not support to the claim that "the flow must be supersonic at the horizon" [91]. So, for conformal gravity BH the fluid flow is neither supersonic nor transonic near the horizon [93,94] . This outflow is unsteady because it follows a subsonic path after passing through the saddle point (r c , v c ) and becomes supersonic with speed approaches to the speed of the light. In the cosmological point of view, the point (v = 0, r = r h ) can be observed as repeller as well as attractor where the solution curves diverge and converge, respectively, [92,98]. These results open a new window correspond to fine-tuning and variability problems in dynamical systems.