Relativistic dust accretion onto a scale-dependent polytropic black hole

In this work we study steady and spherical relativistic dust accretion onto a static and spherically symmetric scale-dependent black hole. In particular we consider a polytropic scale-dependent black hole as a central object and obtain that the radial velocity profile and the energy density are affected when scale-dependence of the central object is taken into account and such a deviation is controlled by the so called running parameters of the scale-dependence models.


Introduction
Accretion of matter is one of the most important phenomena in the astrophysical realm. In fact studies on X-ray binaries, active galactic nuclei (AGNs), tidal disruption events, and gamma-ray bursts are based on accretion processes. The first studies on accretion of matter were considered in the context of Newtonian gravity [1][2][3] and then generalized to curved space-times in [4]. Recently analytical work on isothermal Bondi-like accretion including radiation pressure and the gravitational potential of the host galaxy has risen enthusiasm on the galatic evolution theory community [5][6][7]. Moreover, detailed numerical computations on Bondi accretion [8] using novel consistent smoothed particle hydrodynamics (SPH) techniques [9,10] promises to push even further studies at sub-parsec scales in AGNs, even including radiation pressure due to lines [11,12]. Besides, accretion process have been consider in the context of General Relativity and models beyond the classical Einstein field equations with different interests . More recently, quantum correction E. Contreras: On leave from Universidad Central de Venezuela. a e-mail: econtreras@yachaytech.edu.ec b e-mail: arrincon@uc.cl c e-mail: jmramirez@yachaytech.edu.ec to general relativistic accretion have been considered in Ref. [36].
In this work we study accretion to test scale-dependent models which are inspired in the well known asymptotic safety program [41][42][43][44][45][46][47][48]. Scale-dependent gravitational theories have been extensively used to obtain modified solution of the Einstein field equations in three dimensional spacetimes [49][50][51][52][53], four dimensional black holes [54][55][56][57][58][59][60][61][62], cosmological models [63][64][65] and traversable wormhole solutions [66]. One of the most interesting aspects of scaledependent models is the apparition of some running parameter which controls the deviations form the classical Einstein General Relativity. Among the most interesting results obtained with scale-dependent gravity are modifications in the horizon radius, asymptotic behaviour and black hole thermodynamics. The above mentioned deviations are thought to be important in situations where the classical General Relativity is not longer valid. The study of accretion onto scaledependent black holes could serve as an useful tool in to confirm the validity of those models. In this sense, we are interesting in knowing how the accretion process is modified when the central object is slightly deviated from the classical one. In this paper, as a continuation of a previous work [60], we consider a scale-dependent polytropic black hole but this time as a central object responsible of the accretion of dust. As it is well known, the classical (non-scale-dependent) polytropic black hole [67] is a novelty solution obtained after mapping the negative cosmological coupling with an effective pressure and demanding that it obeys a polytropic equation of state. After that, the matter content degrees of freedom are eliminated from the Einstein field equations and, finally, solutions matching polytropic thermodynamics with that of black holes are obtained. The matter sector arising from this protocol results in an anisotropic matter with the attractive classical feature that it fulfil all the energy conditions. To be more precise, the polytropic black hole solution corresponds to a hairy black hole with a hair satisfying all the energy con-ditions. More recently, we obtained that the introduction of scale-dependence in the classical polytropic solution leads to modifications in the black hole thermodynamics and changes in the topology of the space-time [59]. It is worth mentioning that, as we shall see later, the weak running parameter approximation of the polytropic black hole coincides with the Schwarzschild black hole in a string cloud background solution studied in Ref. [37] as a background metric in the accretion process of different perfect fluids (dust, quintessence, phantom dark energy and stiff matter). In this sense, the polytropic black hole solution and its scale-dependent counterpart represent an interesting system to be taken into account. Even more, as the scale-dependence geometry contains the classical case, the main goal of this paper is to study accretion onto the classical polytropic solution and to compare it with its scale-dependent case.
This work is organized as follows. Section 2 is devoted to summarize the main aspects of spherically symmetric accretion. In Sect. 3 we review some aspects related to scaledependent gravity. In Sect. 4 we show our results and final comments are left to the concluding remarks on Sect. 5

Accretion process of general static spherically symmetric black hole
We consider the following metric ansatz for the general static spherically symmetric space-time where A(r ) > 0 is a functions of r only. The energy-momentum tensor for the fluid is given by where ρ, p u μ are the energy density, the pressure and the four velocity of the fluid. The basic equations for the fluid are, the conservation of mass flux and the energy flux The above equations can be simplified in the case of steady state conditions and spherical symmetry giving and Integration of Eqs. (5) and (6) leads to where C 1 and C 2 are integration constants and u 0 and u = u 1 are non-zero components of the velocity vector satisfying g 00 u 0 u 0 + g 11 u 1 u 1 = −1. Combining (7) and (8) we obtain, Note that given an equation of state that relates p and ρ, we have two equations and two unknowns ρ and u.
The above equations are characterized by a critical point, as is usual for hydrodynamic flow systems. Differentiation of (7) and (9) and elimination of dρ lead to (10) where we have defined It is evident that if one or the other of the bracketed factors in (10) vanishes one has turn-around point, and the solutions are double-valued in either r or u. Only solutions that pass through a critical point correspond to material falling into (or flowing out of) the object with monotonically increasing velocity along the particle trajectory. The critical point is located where both bracketed factors in Eq. (10) vanish, thus

Scale-dependent polytropic black hole
In this section we shall explore the main results obtained in the context of scale-dependent gravity following references [49][50][51][52][53][54][55][56][57][58][59][60]. The effective Einstein-Hilbert action considered here reads with κ k ≡ 8π G k being the Einstein coupling, G k standing for the scale-dependent gravitational coupling, and L M is the Lagrangian density which correspond to the matter sector.
The scale-dependent action provides: (i) the effective Einstein field equation (when we vary respect the metric field), and (ii) a self-consistent equation (when we vary respect the scalar field k). What is more, k is usually connected which a energy scale and encoded any possible quantum effect, if it is present. Then, the effective Einstein equations are where T e f f μν is the effective energy momentum tensor defined according to T μν corresponds to the matter energy-momentum tensor and Δt μν , given by is the so-called non-matter energy-momentum tensor. Thus, the above tensor parametrize the inclusion of any quantum effect via the running of the gravitational coupling. Notice that the running gravitational coupling does not have dynamics which is a important difference between our approach and the Brans-Dicke scenario [68]. The corresponding variation of the effective action, with respect to the scale-field k(x), provides an auxiliary equation In principle, if we combine Eq. (15) with the obtained from Eq. (18), the fields involved might be determined. In particular, the scale setting Eq. (18) allows us to determine the scalar function k(x). However, at least some functional form of G k is given by certain beta function for example, the problem remains unsolved. In order to elude the aforementioned difficulty, we can reasoning as follow: we know that G k inherit some dependence of the coordinates from k(x) and therefore one might treat this as an independent field G(x). Thus, in what follow, we will treat directly the couplings as functions of the radial coordinate, (· · · )(r ), instead of the energy, (· · · ) k .
For the purpose of the present work, we consider a static and spherically symmetric space-time with a line element parametrized as It is worth to noticing that after replacing Eq. (19) in Eq. (15), three independent differential equations for the four independent fields f (r ), G(r ), T 0 0 and T 2 2 are obtained. An alternative way to decrease the number of degrees of freedom consists in demanding some energy condition on T e f f μν . In this work we adopt the same strategy as in [50][51][52][53][54][55][56][57][58][59][60] and we demand the null energy condition (NEC) for being the least restrictive condition we can employ to obtain suitable solutions. More precisely, for the effective energy momentum tensor, the NEC reads κ(r )T e f f μν n μ n ν := κ(r )T μν n μ n ν − Δt μν n μ n ν , where n μ is a null vector. With the parametrization of Eq. (19), both G μν and T μν saturate the NEC and, therefore, for consistency. The above condition leads to a differential equation for G(r ) given by from where with ≥ 0 is a parameter with dimensions of inverse of length. It is worth mentioning that, in the limit → 0, G(r ) = G 0 , Δt μν = 0 and the classical Einstein's field equations are recovered. For this reason, is called the running parameter, which controls the strength of the scaledependency. The solution for the scale-dependent polytropic black [60] hole is given by where M 0 corresponds to the classical black hole mass and stands for the classical polytropic black hole solution (without running) where Note that for 1 Eq. (24) takes the simply form or, in term of the classical parameters we can write down the lapse function as where the auxiliary function a ≡ 1−(3/2) r . The aforementioned relation means that the scale-dependent effect only alter a concrete sector of the solution and, of course, (28) converge to (25) when is taken to be zero. It is worth noticing that the above metric function (see Eq. (27)) corresponds to a 4-dimensional Schwarzschild-Anti de Sitter black hole in the presence of an external string cloud [69] with the string cloud parameter given by α = 3M 0 G 0 −1. In this work, we are interested in to obtain small deviations in the accretion process respect to the expected classical results. Therefore, despite the exact solution of the scale-dependent polytropic black hole is known, we will focus our attention on the case where the running parameter is considered small, compared with the other relevant scales in the problem. The reason is that the scale-dependent philosophy assume that any quantum correction should be small and, as controls the strength of the gravitational coupling, we finally assume small values of that parameter. We then take advantage of this fact to make progress. For the aforementioned reason, we will study the accretion onto the scale-background described by the approximated metric in Eq. (27). Before concluding this section we would like to emphasize that the polytropic black hole will be treated as background whereas the dust is used to investigate the effect that the scale-dependent solution has. Thus, both the black hole and dust are treated separately and just suffer mixing when the dust surround the aforementioned background.

Relativistic dust accretion
In order to describe the accretion process we must be able to obtain the radial velocity profile u(r ) and the density ρ from Eqs. (7) and (9). Of course, depending on the nature of the matter content, the pressure can be obtained as a function of ρ from the equation of the state of the accreted matter. In the case of dust we set p = 0 so that Eq. (9) can be trivially decoupled 1 and can be written as For the particular metric in Eq. (27), the velocity profile reads Replacing (30) in (7) the density profile is given by Note that in order to obtain ingoing fluid and a positive energy density we demand C 1 < 0 and C 2 > 0. In Fig. 1 it is shown the velocity profile for different values of the running parameter . The dots denote the critical velocity of the fluid at a certain critical radius. Note that when  increase the critical point shift to the left. It is worth noticing that this shift in the critical point appears in other contexts. For example, in Ref. [37] the critical point undergoes a shift but in this case it is due to the nature of the accreted matter, i.e, for variations in the parameter ω of the equation of state p = ωρ in Eq. (9). In this case it was obtained that as ω increase the critical point moves towards decreasing radius. In this sense, the behavior of the radial velocity if either the central object change (scale-dependent model) or if the accreted content varies (fixed central object in Ref. [37]) is formally the same. It is worth mentioning that, as a consequence of the scale-dependence of the solution, the horizon radius r H , decrease as grows. In the Table 1, we show the numerical values of the critical and horizon radius for distinct values of the running parameter (with the other values taken as unity). Note that for = {0.0, 0.1} we obtain r critic < r H so that the critical point lies behind the horizon but = {0.2, 0.3} entails r critic > r H and the critical radius occurs before r H . In this sense, the scale-dependence leads to a decreasing in the black hole horizon which is faster than that of the critical radius of the accreted matter.
In Fig. 2 we show the energy density profile. Note that, on one hand the energy density increases as the fluid moves towards the black hole. On the other hand, the effect of the scale can be appreciated far from the black hole because in its vicinity the behaviour is indistinguishable. It is worth noticing that the behaviour depicted in Fig. 2 coincide with that reported in Ref. [37] for a Schwarzschild Black Hole in a string cloud. Indeed, this is an expected result because, as  27)) leads to a Schwarzschild-Anti de Sitter black hole in the presence of external string cloud. Before conclude this paper we discuss the consequences of the running parameter in observables like the black hole mass accretion rate,Ṁ acc [35,37] which, after integrating the flux of the fluid over the surface of a spherically symmetric black hole, can be written aṡ where M is the black hole mass. Of course, in the case of dust accretion we have p = 0 and the above equation reduce tȯ M acc ∝ M 2 ρ. It is worth mentioning that the mass M must be considered as a constant. However, in realistic situations, mass of black hole cannot remain fixed because accretion leads to increase in mass while Hawking radiation leads to the decrease in mass [37]. It should be noted that in the scaledependent scenario we only can estimateṀ acc because we have two obstacles: i) the total mass of the scale-dependent black hole is unknown and ii) the density profile is obtained when the running parameter is taken to be close to zero. Thus, asṀ acc is proportional to M 2 ρ, we can take the leading term in M which allow us to obtaiṅ It is worth noticing that the black hole mass accretion rate becomes an -dependent quantity in the scale-dependent scenario.
To be more precise, the classical black holeṀ acc undergo modifications when scale-dependence is taken into account.

Concluding remarks
In this work, we have considered for the first time the accretion process onto a scale-dependent space-time. It is remarkable the formal similarity between the results obtained here and those obtained in other contexts (see Ref. [37], for example). Should be notice that the scale-dependent framework introduce certain deviations respect the classical counterpart and, indeed, the velocity profile as well as the energy density profile are now lower than the standard solution. In fact, the main difference of our findings respect to other approaches is that in this work we studied the effects of scale-dependence considering a fixed matter content instead of fixing the background and varying the accreted matter.
To be more precise, we modified the central object through the running parameter instead of tuning the parameter of the equation of state that, on the contrary, modify the nature of the accreted fluid. It is worth noticing that the simple model consider here could shed some lights about how the scale-dependence modify the accretion process. It might be interesting to test the scaledependent effects in an observational scenario however this subject goes far beyond the scope of this manuscript and will be worked out in a future work.

Data Availability Statement
This manuscript has no associated data or the data will not be deposited. [Authors' comment: This is a theoretical work, so we have not use any data.] Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecomm ons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. Funded by SCOAP 3 .