The minimum mass of a charged spherically symmetric object in D dimensions, its implications for fundamental particles, and holography

We obtain bounds for the minimum and maximum mass/radius ratio of a stable, charged, spherically symmetric compact object in a D-dimensional space-time in the framework of general relativity, and in the presence of dark energy. The total energy, including the gravitational component, and the stability of objects with minimum mass/radius ratio is also investigated. The minimum energy condition leads to a representation of the mass and radius of the charged objects with minimum mass/radius ratio in terms of the charge and vacuum energy only. As applied to the electron in the four-dimensional case, this procedure allows one to re-obtain the classical electron radius from purely general relativistic considerations. By combining the lower mass bound, in four space-time dimensions, with minimum length uncertainty relations (MLUR) motivated by quantum gravity, we obtain an alternative bound for the maximum charge/mass ratio of a stable, gravitating, charged quantum mechanical object, expressed in terms of fundamental constants. Evaluating this limit numerically, we obtain again the correct order of magnitude value for the charge/mass ratio of the electron, as required by the stability conditions. This suggests that, if the electron were either less massive (with the same charge) or if its charge were any higher (for fixed mass), a combination of electrostatic and dark energy repulsion would destabilize the Compton radius. In other words, the electron would blow itself apart. Our results suggest the existence of a deep connection between gravity, the presence of the cosmological constant, and the stability of fundamental particles.


Introduction
The existence of a minimum length is an important prediction of phenomenological quantum gravity. A fundamental bound yielding the smallest resolvable length scale could help solve several outstanding problems in theoretical physics, for example, by providing a natural cut off to regularize divergent integrals in the renormalization of quantum field theories, or by preventing matter from collapsing to form a singularity at the center of a black hole. Furthermore, the existence of both minimum and maximum length scales in nature or, at least, at a given epoch (for example, R U ≈ 1.3×10 28 cm is the current size of the horizon and acts as a de facto maximum length scale for physical phenomena in the universe today), is naturally linked to the existence of upper and lower bounds on the mass-energy scales of physical processes. In this paper, we determine bounds on the mass/radius ratio of stable charged objects, both classically and quantum mechanically, and investigate their implications for fundamental particles.
One way to introduce a minimum length is via a Generalized Uncertainty Principle (GUP) that extends the usual Heisenberg Uncertainty Principle (HUP) to include nonlinear terms, which may then be interpreted as quantum gravity effects. A GUP of the form where A and B are positive constants, was proposed in [1] , and many different modifications of the HUP have since been considered in the literature. The GUP in Eq. (1) gives rise to an effective minimum length, in the form of a minimum positional uncertainty, which is proportional to √ A, but the existence of a minimum bound is a general feature of these models. Collectively, such modified relations are referred to either as GUPs, or as minimum length uncertainty relations (MLURs) (for general reviews of GUP phenomenology see [2,3], and see [4,5] for reviews of minimum length scenarios in quantum gravity). The existence of an absolute bound of the form x ≥ x min implies that x cannot be made arbitrarily small, irrespective of the uncertainties in any other physical observables.
It is interesting to note that the idea of a minimum length induced by quantum gravitational effects was first proposed long ago [6]. By investigating the quantum mechanical measurement of the 0 01 component of the Christoffel symbols, Bronstein obtained a fundamental limit for the temporal uncertainty inherent in the measurement process, where ρ and V denote the density and the volume of a massive body, respectively. This, in turn, may be related to the spatial uncertainty via x ≤ c t. By taking into account that M = ρV is the particle mass, we obtain an equivalent mass-timedensity uncertainty relation of the form Since the existence of lower bounds for physical quantities is a natural characteristic of quantum processes, the presence of similar bounds in the framework of classical physics appears, at first sight, somehow unusual. Nonetheless, lower bounds on the ratios of physical quantities do occur naturally in classical general relativity, as a form of stability condition for compact objects. Two such bounds are of particular interest for both astrophysics/cosmology and for the study of subatomic particles: the minimum mass/radius ratio for a compact object in the presence of dark energy and for a charged compact object.
Classical (3 + 1)-dimensional general relativity, with no dark energy component ( = 0), imposes an upper bound on the mass/radius ratio of any compact object, the Buchdahl limit [7], which requires a sphere of matter with arbitrary equation of state to satisfy the stability constraint If this condition is violated, the object will inevitably collapse under its own gravity to form a black hole. (Typically, this process occurs for stars when the mass of the star exceeds approximately 3.2M [8].) The Buchdahl limit, and its extensions, have been intensively investigated, including the study of the effects of the cosmological constant [9], and of sharp limits on the mass/radius bounds [10][11][12]. D-dimensional extensions of the Buchdahl limits in the presence of a cosmological constant were obtained in [13,14], while the mass/radius ratio for compact objects in five dimensional Gauss-Bonnet gravity and f (R) gravity were considered in [15,16], respectively.
In the presence of dark energy, a minimum bound for the mass/radius ratio of a stable compact object also exists. This result follows rigorously from the generalized Buchdahl inequalities for a compact object in the presence of a nonzero cosmological constant ( = 0) [17]. For > 0, the existence of a lower bound admits an intuitive explanation: If the stability condition is violated, the self gravity of the object is insufficient to overcome the repulsive force due to dark energy. Remarkably, a minimum mass also exists for < 0 [17]. Physically, this is due to the balancing of both gravitational and dark energy attraction with local pressure in the matter distribution, induced by non-gravitational forces.
In [17], it was shown that an uncharged compact object is stable against dark energy repulsion when its density is above a certain minimum value, for > 0. A similar condition follows from the generalized Buchdahl inequality for a charged compact object, even in the absence of dark energy [18]. For = 0, this gives For = 0, this result generalizes to [18] 2G M Hence, for R 2 1, the effect of dark energy is subdominant to electrostatic repulsion. Equation (7) can also be Taylor expanded to give so that, to leading order, we have In this limit, we recover the standard expression for the classical radius of a charged body with mass M and charge Q: that is, the radius at which the electrostatic potential energy associated with the object is equal to its rest mass, Mc 2 . We recall that this is roughly the radius the object would have if its mass were due only to electrostatic potential energy. Several general restrictions on the total charge Q of a stable compact object can also be obtained from the study of the behavior of the Ricci invariants r 0 = R i i = R, r 1 = R i j R i j and r 2 = R i jkl R i jkl . For example, by considering that the surface density must vanish, it may be shown that Q satisfies the condition where ρ c and p c are the central density and pressure of the object, respectively. Though most investigations of stellar structure have been done under the assumption of charge neutrality, there are a number of physical processes that could lead to the formation of charged regions inside compact objects. One of these processes could be mass accretion by a neutron star [19], if it happens that accretion produces luminosities very close to the Eddington limit L E = 4π G Mm p c/σ T [20], where M is the mass of the star, σ T is the Thomson scattering cross section, and m p is the mass of the proton. Let us assume that the star undergoes spherical accretion, and that the accreting material is ionized hydrogen. If the accreting luminosity of the star is L, then infalling electrons, at a distance r from the center of the star, experience a radiative force F rad = σ T L/4π cr 2 [19]. On the other hand, the radiation drag acting on the protons is smaller by a factor m e /m p 2 ≈ 3 × 10 −7 , where m e is the mass of the electron, so that electrons and protons are subject to different accelerations. Therefore, a star can acquire a net positive charge, Q = G Mm p /e (L/L E ), through accretion [19]. Another possibility giving rise to the existence of charged macroscopic objects is related to quark deconfinement inside dense neutron matter [21]. If deconfinement occurs inside a dense neutron star, the strange beta-equilibrated quark matter consists of an approximately equal mixture of three quarks, the up, down and strange quarks, with a slight deficit in the number of strange quarks. This composition of quark matter could lead to a net positive charge inside the neutron star or quark star.
In deriving the results quoted above, it was assumed that the pressure within the object is isotropic. Interestingly, anisotropies in the pressure distribution inside compact objects, in the presence of a cosmological constant, can significantly modify both the upper and the lower bounds for the mass. These bounds are strongly dependent on the anisotropy parameter , which is defined as the difference between the tangential and radial pressure at the surface of the object. Pressure anisotropies modify the lower bound on the minimum density of a stable spherical mass distribution, for > 0, so that [22] Hence, the presence of the anisotropic pressure distribution weakens the lower bound on the mass. Remarkably, even anisotropic objects may still be stable, as long as their mass exceeds an absolute classical minimum value, determined by both and . The existence of a cosmological constant therefore has profound consequences for the stability of matter, even at the classical level. The nature of the cosmological constant or, more generally, dark energy, is one of the most fundamental problems in contemporary physics. In particular, the important question of whether represents a true fundamental constant of nature, or simply an approximation (for example, an approximately constant field configuration that arises as a solution to the, as yet unknown, equations of motion for a dynamical scalar field), remains unanswered. However, even if we take the existence of the cosmological constant, as implied by the Cosmological Concordance, or CDM model (cf. [23][24][25][26][27]), at face value, yet another question remains: Is an independent constant of nature, or can it be expressed in terms of other, known constants of nature?
In [28], it was shown that, if the minimum mass in nature is M W = (h/c) √ /3 ≈ 3.5 × 10 −66 g, as proposed by Wesson [29], then a particle with mass M W and density ρ , given by Eq. (6), has a classical radius given by where R P is the Planck length, and R W = √ 3/ ≈ R U ≈ 10 26 m. This is of the same order of magnitude as the classical electron radius, Based on this observation, it was suggested in [28] that the radius R, given by Eq. (13), should be formally identified with r e and taken as a minimum possible length scale in nature. The cosmological constant may then be formally identified with the 'standard' set of physical constants where α = e 2 /q 2 P is the fine structure constant and q P = √h c is the Planck charge. Evaluating this numerically gives = 1.4 × 10 −56 cm −2 , in good agreement with the value inferred from various cosmological observations [23][24][25][26][27]. In [28], the formal identification R = r e was justified on the basis of a 'small number hypothesis', which represents an extension of the large number hypothesis proposed by Dirac [30], and which proposes that a numerical equality between two very small quantities with a very similar physical meaning cannot be a coincidence. Interestingly, the same identification was also obtained in [31] using information theory, in which a set of axioms for the cosmological constant were formulated by analogy with the Khinchin axioms [32], by formally replacing the dependency of the information measure on probabilities of events by a dependency of on the other fundamental constants of nature. These results raise the interesting questions of whether there is an intrinsic relation between electromagnetic phenomena and dark energy, and of what form the possible interaction/coupling of the electric charge e with the cosmological constant may be.
In this work, we aim to show concretely that, by consistently combining results from general relativity, canonical quantum theory, and MLURs predicted by phenomenological quantum gravity, the identification (15) can be explicitly obtained by saturation of the quantum gravitational stability condition for the electron. Furthermore, our results show this identification to be broadly consistent with the results obtained by various early pioneers of quantum gravity research (see [4,5] for reviews), including those of Bronstein [6] and those obtained by Károlyházy et al. [33][34][35].
However, some assumptions present in the existing quantum gravity literature are shown to be inconsistent with canonical quantum mechanics. Specifically, certain assumptions as regards the nature of MLURs imply quantum gravity effects which manifest on scales larger than the observed Compton wavelengths of elementary particles. (Clearly, this cannot be the case, otherwise quantum gravity would already have been observed in the lab.) Interestingly, when these assumptions are revised in order to ensure the consistency of MLURs with the canonical theory (i.e. by ensuring that quantum gravity effects are subdominant to 'standard' quantum effects), the results obtained are inconsistent with both Bronstein's formulation, Eqs. (3) and (4), and Károlyházy's original results [33,34]. The reasons for these discrepancies are discussed in detail in Sect. 6.
The structure of this paper is as follows. In Sects. 2, 3, we obtain the generalized Buchdahl inequalities, in arbitrary space-time dimensions, for a charged spherically symmetric object embedded in a space-time with general nonvanishing (i.e. positive or negative) dark energy. This extends previous results given in [36], in which the D-dimensional generalized Buchdahl inequalities for uncharged matter were obtained in both the asymptotically de Sitter and the anti-de Sitter cases. Specifically, in Sect. 2, the gravitational field equations and the hydrostatic equilibrium equations, also known as the Tolman-Oppenheimer-Volkov (TOV) equations, are obtained. The general form of the mass limits are given in Sect. 3 and various limiting cases of special physical interest are considered in Sect. 4. In Sect. 4.5, we use our previous results to derive bounds on the minimum and maximum densities of static asymptotically de Sitter and anti-de Sitter space-times. [These results are interesting because, even if the real universe is an expanding (3 + 1)-dimensional spacetime with a positive cosmological constant, these static, asymptotically de Sitter and anti-de Sitter spaces still have essential interpretations from the viewpoint of holographic duality.] The thermodynamic stability of higher-dimensional charged objects is investigated in Sect. 5. By minimizing the gravitational energy of charged objects with minimum mass/radius ratio, we show that the ratio of the square of the charge of the object to its mass, Q 2 /M, is proportional to the radius of the object, R (to leading order). In Sect. 6, we investigate the quantum mechanical implications of the lower mass bound for charged objects, in the standard (3+1)dimensional scenario, leading to the identification of the cosmological constant in terms of other fundamental constants of nature, as in Eq. (15 ). This identification is seen to arise as a consequence of the stability bound for the electron, viewed as a charged, gravitating, quantum mechanical particle, and extends the results obtained in [36], in which the minimum mass of an uncharged, gravitating, quantum mechanical particle was determined. Section 6.3 shows that MLUR leads to holography in arbitrary noncompact dimensions, and discusses its relation to the results previously obtained in Sect. 6. Section 7 contains a summary of our main results and a brief discussion of possibilities for future work.

Geometry, field equations, and the TOV equations for charged objects in D dimensions
In the following, we assume that the line element of a spherically symmetric D-dimensional static space-time can be represented in a generic form as [37] where Here x 0 = ct, x 1 = r , where r is the radial coordinate in D space-time dimensions, with domain 0 ≤ r < ∞, while the angular coordinates are defined according to 0 ≤ θ i ≤ π , i = 1, . . . , D − 3, and 0 ≤ φ ≤ 2π , respectively. The Einstein gravitational field equations are given by where κ = 8π G D /c 4 and the energy-momentum tensor contains three components, corresponding to matter (M), dark energy (DE), and the electromagnetic field (E M). We also assume that the matter and dark energy parts may be expressed in terms of fluid variables, so that with the dark energy obeying the equation of state P DE = wρ DE c 2 , where ρ DE = D c 2 /8π G D , and w = constant. Finally, the electromagnetic energy-momentum tensor is given by where F μν = ∇ ν A μ − ∇ μ A ν and A μ denotes the electromagnetic vector potential. The electromagnetic field tensor F μν satisfies the cyclic identity and the Maxwell equations where j ν denotes the electric current four-vector. We choose the rest frame of the fluid so that the D-velocity is which is then normalized according to u 2 = g tt u t u t = 1. We also introduce the electric charge density ρ e , which is related to the time component of the current four-vector by the relation From the Maxwell equation (22), and with the use of the charge density defined above, we can construct the 'proper charge', Q(r ), defined as where we note that the definition does not contain the angular volume D−2 . By direct substitution, we obtain the nonzero components of the energy-momentum tensor of the electromagnetic field as For later use, we also compute F 2 = F αβ F αβ , which contains only contributions from F rt and F tr , so that . Thus, for the components of the electromagnetic energymomentum tensor, we obtain where i = 1, 2, . . . , D − 2 denote the angular variables of a D-dimensional space-time. Hence, the electric field from the charge density generates a positive energy density and a radial pressure equal to Q 2 /2r 2(D−2) , and a negative transverse pressure with exactly the same magnitude. The conservation of the total energy-momentum tensor gives the equation This can be rewritten in a more compact form as (35) where the effective pressure P eff (r ) is defined as In this formulation, the charge dependent term is manifest, and the conservation equation reduces to the uncharged case when Q = 0.
The Einstein field equations for the G t t , G r r and G θ i θ i components then become respectively.

2.1
The TOV equation for a charged sphere in D-dimensional space-times Equation (37) can be integrated immediately to obtain the 'accumulated' mass M(r ) inside radius the r , which is a function of the cosmological constant, D , and of the charge integral, The charge integral in Eq. (40) can be transformed by integration by parts, giving In the integral no surface term at infinity appears and the result is not valid for all space, but only for r < R, where R is the radius of the sphere. The second term on the right-hand side of Eq. (41) is the electromagnetic mass contribution, to be included in the total mass of the sphere. Thus, e −λ(r ) becomes We now define the total mass M T (r ) as the sum of the matter mass M(r ) and of the electromagnetic mass generated by the charge Q(r ) as The total mass-energy density inside the fluid sphere, including the electromagnetic contribution ρ q (r ), can then be defined as where ρ q (r ) has been defined implicitly.
Using the definition of M T (r ), e −λ(r ) can then be written in the simpler form where By substituting the above expression into Eq. (38), we obtain Thus, with the use of Eqs. (35) and (47) we obtain the TOV equation, describing the structure of a charged sphere in D dimensions, which takes the form where we have introduced the Buchdahl variables, defined as .
We note that the right-hand side of the TOV equation contains an extra term Q Q /r 2(D−2) , vis-á-vis the uncharged case [36], which represents the charge contribution to the hydrostatic equilibrium.

Mass limits in D dimensions for charged spherically symmetric objects in the presence of dark energy
In terms of Buchdahl variables, Eqs. (47) and (35) can be written as and respectively, where (. . .) (x) denotes differentiation with respect to x. More elegantly, Eq. (50) can be formulated in another way as This relation will be important later, in the derivation of the Buchdahl inequality. Furthermore, there exists an additional relation between ρ T , ρ DE and the function w(x) = w(r 2 ), defined as From Eq. (49), we then obtain After differentiating Eq. (54) with respect to x [and with the use of Eq. (51)], we find Since ρ T = ρ + ρ q , we next obtain and, with the use of Eq. (53), we arrive at the result Furthermore, since y(x) is defined in terms of Buchdahl variables as we have where and Using Eqs. (58)-(61) in Eq. (57), we finally obtain This is the generalized Buchdahl equation for spherically symmetric, charged compact objects in D-dimensional space-time. As compared to the uncharged case [36], it contains an additional term on the right-hand side, which is the extra contribution due to the presence of the electric charge.

Buchdahl inequality in D space-time dimensions
In the following, we introduce four new variables z, γ , ψ and η, defined as where η(r ) is defined in terms of the integral The function (r ), introduced in Eq. (63), is explicitly defined by giving In terms of the new variables introduced above, the Buchdahl equation Eq. (62) can be written as For a stable charged object, the assumption that the average total densitȳ does not increase with r implies that M T /r D−1 is a decreasing function. Therefore, we assume that, for all r < r , (r ) satisfies the condition and also that From Eq. (68), we can then obtain the generalized Buchdahl inequalities from the condition that, for any physical density profile of the charged object, the following relations hold: together with the condition that (Q 2 ) > 0 inside the object. The inequality therefore holds, for all r in the range 0 ≤ r ≤ R, where R is the radius of the fluid sphere, for any static charged object. Using the mean value theorem, we get and, since The above relation can be written explicitly as All the integrals in the inequality (76) can be evaluated using the conditions (70) and (71). By using (70), it follows that the denominator of right-hand side of (76) is bounded, such that The second term on the left-hand side of (76) also has an upper bound, where γ 0 ≡ γ (r = 0) is the central value of γ . The term involving γ (r ) also has a lower bound, Consequently, the term in the numerator on the right-hand side of (76) is bounded from below by where we have denoted Plugging integrals (77), (79), and (80) into (76) and using the relation y 2 = 1 − (r )/r D−3 , we next obtain At the surface of the compact object, r = R, and thus, using Eq. (49) together with the value of the dark energy at the surface where we have used the fact that arcsin ( 1 − y 2 ) ≤ 1 − y 2 /y, and have assumed that γ ≥ 0 for 0 ≤ r ≤ R. In the γ 0 term, we also assume that ζ(R) ≥ y(R) as a result of the energy condition ρc 2 + P ≥ 0, which allows us to replace 1/ζ with 1/y. For γ 0 = 0, the inequality (83) properly reduces to the uncharged case discussed in [36]. Even when y is bounded between 0 and 1, the last term on the left-hand side is unbounded, since it is proportional to 1/y. The metric becomes the black hole metric for y = 0, but we expect the Buchdahl limit to set in before this point, at the upper bound /R D−3 = 1 − y 2 .

Dimensionless form of the mass bounds
We now introduce a new set of dimensionless variables and respectively. In terms of these dimensionless quantities, the inequality (83) can be expressed in a simple form as where As a cross-check of our main result, we compare these bounds with the known result for uncharged objects obtained in [36]. When Q = 0, we have = 0, = 0, and In this case, in complete agreement with the previous result [36].
In order to obtain the influence of the charge on the mass bounds, we need to evaluate the value of , which contains the unknown parameter γ 0 and the upper bound u + [through (1/y) upper in (84)]. Since ζ(r = 0) = 1, an estimate value of γ 0 can be obtained from Eq. (64): where λ e =h/m e c is the Compton wavelength of the electron. This is equivalent to the statement that a charge e cannot be compressed to within a radius smaller than λ e . Consequently, we can approximate The dimensionless quantity ∼ R 3 can have values as small as 10 −87 (for M T 2 × 10 3 g, R = 1.5R S , where R S = 2G M/c 2 is the corresponding Schwarzschild radius) to as large as 1600 (for M T M = 2 × 10 33 g, R = 1.5R S ) when D = 4 and for very small . Thus, we cannot take it to be a generically small quantity.
On the other hand, the cosmological constant in four space-time dimensions is extremely small in the real physical world. The quantity b is thus very small, since R is typically much less than, or at most comparable to the size of the universe, R R U ≈ R W = √ 3/ . Therefore, it is interesting to explore the mass bounds for charged spherical objects when , b. Another important limit is when the dark energy becomes a cosmological constant with w = −1. We will explore mass limits in these situations in the following section.

Mass limits for R 2 1 cases
In this section, we assume the dark energy density to be very small, i.e. R 2 1. We first consider the case in which dark energy corresponds to a cosmological constant with w = −1. The general case, with arbitrary w, is then investigated.

Cosmological constant dark energy
If dark energy corresponds to a cosmological constant and b is very small, we can set w = −1 in Eq. (88) so that The upper (lower) mass limit is then given by u +(−) respectively. For B < 0, C > 0, u − is positive and the lower limit exists. It is straightforward to see that B is always negative for D ≥ 2 and C is always positive for D ≥ 0, since , ≥ 0.

Generic dark energy
A more general situation is when we allow a small wdependent term to exist for ω = −1. In this case, we may approximate the quantity 1 − 4 AC/B 2 as where Since C 0 > 0, the second term on the right-hand side of Eq. (95) will determine whether the lower bound u − exists. Thus, for > (<) 0, a nontrivial positive lower bound u − will exist if

Charged sphere with no dark energy
We may also set b = 0 and simply consider the mass limits for a charged sphere in asymptotically flat space. From Eq. (88), it follows that and Hence, for D ≥ 2, both the upper and the lower limits always exist according to Eq. (98).
Due to the electrostatic repulsion between charged fluid elements, the minimum mass/radius power ratio is required in order for gravitational attraction to counteract the repulsive force, which enables the object to maintain a static configuration. The maximum mass/radius power ratio denotes the limit before gravitational collapse. For a charged object, we expect the maximum mass/radius power to be greater than that for an uncharged object, i.e. the Buchdahl limit Eq. (5), due to the repulsive effect of the charge density.

Small objects with , 1
As long as the size R of the object is sub-astronomical (i.e. small compared to the size of a typical star), the numerical value of in (3 + 1) dimensions is generically much smaller than unity. We now consider the condition 1, together with 1, in arbitrary dimensions, and derive explicit expressions for the mass bounds in this limit.
For , 1, we can approximate 1 − 4 AC/B 2 as and the mass limits u ± become The minimum mass/radius power can thus be approximated by where we define the total charge contribution Q tot ≡ D−2 Q. Note again that the total mass M T is the sum of usual matter mass and the electromagnetic mass given by Eq. (43). For zero dark energy, b = 0, and for very small the minimum mass/radius power simplifies to The minimum mass/radius power ratio can also be cast in the form of a minimum average density for a static spherical object, i.e.
Remarkably, with the contribution from the electric charge density, the lower bound (i.e. nontrivial positive values of u − ) exists, for a wide range of values of D , in both the asymptotically de Sitter and the anti-de Sitter cases. For positive (negative) D , as long as w is not much less (more) negative than −(D − 2)/(D − 1), the lower bound always exists.
On the other hand, the maximum mass/radius power ratio is Thus, the maximum mass/radius power becomes larger in the presence of the electric charges, but the presence of dark energy could either enhance or weaken the upper bound, depending on the sign of w. For zero dark energy and very small , the maximum mass/radius power limit reduces to For convenience, we now present some results in (3 + 1) dimensions with positive and w = −1.
where we have assumed small contributions from the dimensionless quantity . At this point, in order to facilitate the comparison between the previous four-dimensional results obtained in [18] and the results of the present paper, we would like to mention that due to the different choice of units and scaling of physical parameters the results of [18] can be re-obtained once the substitutions 4π Q 2 /c 2 → Q 2 and c 2 → 8π G B are performed in all the equations of the present paper.
We end this section with a discussion of the holographic interpretation of the minimum and maximum mass/radius power ratio, focusing on the scenario in which the object is embedded in an asymptotically anti-de Sitter (AdS) spacetime, with D < 0. In this case, the maximum mass bound for a given radius of a charged object corresponds to the Hawking temperature, T H , of a charged (i.e. a Reissner-Nordström) black hole (RNBH), with the same mass. At this radius, any object with larger mass than the maximum mass will inevitably collapse to form a black hole. For a large RNBH with positive heat capacity, T H is an increasing function of the black hole mass and can be determined once the mass is known (see, for example, [38] for explicit formulas). From the viewpoint of holographic duality, the Hawking temperature can be identified with the temperature of the dual gauge plasma in the deconfined phase (for example, the quark-gluon plasma in QCD). Specifically, it can be interpreted as the maximum temperature of the dual gauge matter in the confined phase before it undergoes an inevitable phase transition into a deconfined phase. Or, in other words, as the confinement/deconfinement phase transition temperature.
Generically, a static configuration in the bulk gravity picture of the background AdS space is dual to a thermal phase in the boundary gauge picture. To give a few examples: An empty bulk AdS space is dual to the confined phase of gauge matter on the boundary. A black hole in the bulk is dual to the thermal phase of the gauge matter on the boundary, in which the Hawking temperature of the black hole is identified with the temperature of the thermal gauge phase. The mass of a static AdS star made of fermions is dual to the conformal dimension of the multitrace operator in the dual conformal field theory (CFT) [39,40]. In [41], it was shown that the mass of the bulk AdS star is linearly proportional to the number density of particles on the boundary when the mass is large. This provides a holographic correspondence between the bulk mass in the gravity picture and the particle density on the boundary in the gauge field picture.
With this in mind, we can interpret the minimum mass at a given radius, derived in this section, to be the dual of the minimum density of the gauge matter living on the boundary space. If the density of the gauge matter is too low, it will evaporate into a 'hadron' gas. This gauge picture corresponds to the gravity picture in which the mass of the spherical object scatters into the entire AdS space, since it is lower than the minimum mass required for stability at a given radius. Thus, the minimum mass/radius power ratio gives the critical density of the dual gauge 'nucleus', under which it will evaporate into the 'hadron' gas phase.

Bounds on the static universe
We can apply the condition (87) to the entire universe by setting R → {R U , ∞}. For asymptotically dS space, this is not allowed since r is limited by the cosmic horizon radius R U = √ (D − 1)(D − 2)/2 D . For asymptotically AdS space, R → ∞ is physically viable. Generically, the bounds given by Eq. (87) may yield bounds on the average density of static, asymptotically dS and AdS universes by letting R = R U and R → ∞, respectively.
First, let us consider the AdS case. Since , given by Eq. (92), is proportional to R 3 /y, dividing by R 2 gives an interesting constraint on the average density of a static universe, with D > 3. For R → ∞, the parameters in Eq. (88) become leading to the degeneracy of u + and u − . This implies the uniqueness of the average density of the static asymptotically AdS universe, which is given bȳ where This bound only exists, for D < −κc 2ρAdS , w −1, if the universe is charged. For the uncharged case, Q = 0, the maximum mass/radius power ratio of the entire universe (R → ∞) gives the average density bound for the static AdS universe. For asymptotically dS space, we can set R = R U = √ (D − 1)(D − 2)/2 D to obtain an approximate average densitȳ For a static uncharged dS universe, starting from Eq. (90) and setting R = R U , we obtain These limits exist only for w > −(D − 2) 2 /(D − 1) 2 . Even if, in reality, the universe is an expanding (3+1)-dimensional space-time with positive , the static dS and AdS space still have essential interpretations from the viewpoint of holographic duality (cf. discussion of the AdS case in Sect. 4).

Total energy and gravitational stability of charged objects with minimum mass/radius ratio in arbitrary dimensions
In the present section, we investigate the stability of charged gravitating objects in arbitrary dimensions. As a first step in this study, we derive an explicit expression for the total energy of a compact, charged, general relativistic object, which includes the contribution from the gravitational energy. For the sake of notational convenience, we use a system of units such that c = G = 1 and κ = 8π throughout the remainder of this section. A definition of gravitational field energy E G , with interesting properties, was proposed in [42], and further developed in [43,44]. The derivation of E G proceeds as follows: Let us assume that T μ ν is the energy-momentum tensor of a stationary system with mass M, embedded within a space-time with a time-like Killing vector ξ ν . Then the matter-energy E M of the system is defined as [42,43] where is any space-like surface over which the energy is to be evaluated. If M is the total energy of the system, then the gravitational energy of the system E G is defined as [42].
This definition of the gravitational energy can be reformulated in terms of the theory of surface layers [43,44] as follows: let the surface be a closed surface, which cuts the space-time in such a way that the exterior space-time remains unchanged, while the interior space-time is flat. The internal energies of the matter and of the gravitational field are then replaced by the surface energy of , so that E G = E − E T , where E G is the energy of the gravitational field inside , E is the energy of , and E T is the energy of the matter inside [43]. The matter-energy inside the surface is given by E T = V T μ ν ξ ν u μ dV , where V is the invariant volume inside , and u μ is the four-velocity field of points that are fixed in .
Next, we introduce the unit normal vector field n of . The exterior curvature tensor of is defined by K i j = ∇ j n i , where we have introduced the set of intrinsic coordinates x i , x j on . The surface energy tensor of (the Lanc- where [] denotes the discontinuity at , and K = K i i [43]. The energy of the cut is given by E = S μ ν ξ ν u μ d , where is an invariant surface element. For a vacuum solution of Einstein's field equations, E gives the gravitational field energy inside . If there is a nonvanishing energymomentum density tensor inside , then the gravitational field energy is given by [43] This definition is manifestly coordinate invariant.
In the case of spherical symmetry, and in arbitrary dimensions, S 0

and thus the energy inside the surface is given by
In the exterior of a higher-dimensional charged matter distribution, the vacuum metric functions satisfy the condition ν + λ = 0, and the metric is the generalized D-dimensional Reissner-Nordström-de Sitter metric, with coefficients where the dimensionless parameters u, and b are given by Eq. (85). Therefore, the gravitational energy inside a surface of radius R, where R is the radius of the charged object, is given by where . For an object with minimum mass/radius power ratio, and with small , b and negligible , the condition (102) is satisfied. Thus, eliminating the total mass using Eq. (102), the gravitational energy becomes For a stable configuration, the total gravitational energy should have a minimum, defined by The resulting expression can be rearranged into a cubic equation in D , and thus solved analytically for D in arbitrary dimensions. However, the expression is long and complicated, so we will give only the approximate form, valid to leading order in Q 2 and D . Thus, we have giving as the radius of a stable charged object, with minimum mass/radius power ratio, which also minimizes the gravitational energy of the configuration. Following the method presented in [18], for compact objects in (3 + 1) dimensions, we obtain the minimum mass of a charged object as a function of the D-dimensional cosmological constant D , and of its electric charge, in the form Using Eqs. (122) and (123), we can now eliminate the cosmological constant and obtain the ratio of the square of the charge of the object to its mass, as a function of the radius: For D = 4, this gives From the expression for R in Eq. (122), we see that stability can be achieved only when D > 0 for negative w. Furthermore, if we fix the mass M the of object to the minimum allowed at a given radius R, and consider a change δ R, then any change in the charge contribution Q 2 must be compensated by a corresponding change in the D contribution, in such a way that as to keep the gravitational energy of the system constant.
In the case of the electron, for which Q = e and M = m e , Eq. (126) automatically recovers the classical electron radius, r e = 1.28e 2 /m e (in CGS units). In classical, relativistic, but non-gravitational physics, this is obtained from the requirement that the electrostatic energy e 2 /r e equals the rest massenergy m e . In the present approach, this result is obtained by minimizing the total gravitational energy of a charged system with minimum mass/radius ratio.

A complementary stability analysis
Consider a charged static object with the minimum mass/radius power ratio. One way to obtain a stability condition for this object is by minimizing the quantity M/R D−3 min with respect to the radius R. If the object has the minimum mass/radius power ratio and we make a slight change in R, its mass has to change in such a way that the mass/radius power ratio remains constant. By setting and using condition (102), we obtain the stability condition yielding the radius . (129) Substituting back into Eq. (102) gives the mass at the minimum mass/radius power ratio configuration, The dark energy constant D can be eliminated using Eqs.
(129) and (130) to give For D = 4, this gives Although the stability analysis based on the minimization of gravitational energy allows only positive D , for negative w, the stability analysis presented here allows both D > 0 and D < 0. However, for D < 0, the equation of state parameter w must satisfy the condition w > −(D −1)/(D − 2), which gives w > −3/2 for D = 4.

Quantum implications of a classical minimum mass for charged objects
In this section, we investigate the quantum implications of the existence of a classical minimum mass for charged objects in (3 + 1) dimensions. In Sect. 6.1, we begin by reviewing a series of quantum gravity arguments that give rise to 'cubic' MLURs, in which the minimum positional uncertainty ( x) min is given by the cube root of three phenomenologically significant length scales. In general, such relations may be derived by minimizing the total uncertainty, due to both canonical quantum mechanical and gravitational effects, with respect to the mass M of the system. In Sect. 6.2, we combine the mass minimization condition giving rise to cubic MLURs with phenomenological results from canonical quantum mechanics, namely, the existence of a minimum Compton radius for any object (i.e. 'particle') of mass M, and consider charged objects subject to the bound (10). By combining all three mass bounds, we obtain the condition for quantum gravitational stability of a charged particle. Applying this to the electron, we find that saturation of this condition requires the existence of a 'new' fundamental length scale in nature, R * , of order R W . Furthermore, setting R * = R W = √ 3/ , we recover the expression for , written in terms of the fundamental constants {c, G,h, e, m e }, Eq. (15).
For later convenience, we now define the Planck length R P , mass M P , and charge q P , expressed in terms of the independent constants {c, G,h}, via and For the sake of clarity, all fundamental constants are written explicitly throughout the remainder of this section. Following [29], but adopting the notation and terminology used in [36], we also define two mass scales, M W and M W , associated with the cosmological constant , From here on, we refer to these as the first and second Wesson masses, respectively. The associated lengths are

Cubic MLURs in phenomenological quantum gravity
In addition to those proposed by Bronstein [6], at least three sets of heuristic arguments based on quantum gravitational phenomenology give rise to the cubic MLURs. The first is based on an extension of a gedanken experiment first proposed by Salecker and Wigner [46], which proceeds as follows. Suppose we attempt to measure a length d using a special 'clock', consisting of a mirror and a device that both emits and detects photons. The photons are reflected by the mirror, placed at some unknown length d from the device, which emits a photon and re-absorbs it after a time t = 2d/c. Assuming that the recoil velocity of the device is well below the speed of light, it may be modeled non-relativistically. Then, by the standard HUP, the uncertainty in its velocity v, at the time of emission, is of order where M is its mass and x is the initial uncertainty in its position. We note that the 'device' considered here may still be small enough to behave quantum mechanically. For example, we may consider a two-state system involving a charged particle, embedded within a broader experimental set-up, that emits and re-absorbs photons. In this case, x and p = M v refer to the positional and momentum uncertainty of the charged particle, which, together with the mirror that reflects the photons, measures (or 'probes') the distance d.
During the time required for the photon to travel to the mirror and back, the particle acquires an additional positional uncertainty ( x) = 2d v/c [i.e., in addition to the standard positional uncertainty x h/(2M v)], so that the total positional uncertainty is given by Minimizing this expression with respect to x, and using (neglecting numerical factors of order unity), where λ C = h/(Mc) denotes the Compton wavelength of the particle, so that If we then require d > R S = 2G M/c 2 (i.e. that our measuring device is not inside a black hole), we obtain ( x tot ) min = R P . However, more realistically, we may require d > λ C , so that the measurement process devised by Salecker and Wigner gives rise to a MLUR which is consistent with the standard Compton bound. The original argument presented in [46] may also be modified to explicitly include the classical 'uncertainty' in the position of the measuring device due to gravitational effects. Assuming that this is proportional to the Schwarzschild radius of the device R S , the total uncertainty due to canonical quantum mechanical effects, plus gravity, is where β > 0 [47]. Minimizing this with respect to M yields and, substituting this back into Eq. (141), we obtain where (again) we have neglected numerical factors of order unity in the preceding expressions. One disadvantage of the approach described above is that it appears to apply only to the specific measurement process envisaged in [46]. However, in [48,49], it was shown that the expression for ( x) min given in Eq. (139) may be obtained from general principles in canonical quantum mechanics. For V = 0, the time evolution of the position operatorx(t) given by the Schrödinger equation (in the Heisenberg picture) is This may be solved directly to givê The spectra of any two Hermitian operators,Â andB, must obey the general uncertainty relation [50] and In the Heisenberg picture, we have ( x) 2 = x(0) x(t), so that, again setting t = d/c, ( x) min is given by Eq. (139). As with Salecker and Wigner's gedanken experiment, we have again considered performing two measurements of the position of an object, one at t = 0 and the other at some time t > 0, and can relate this to the uncertainty inherent in the measurement of a length scale d = ct. However, in this case, no assumptions have been made about the details of the measurement procedure, so that Eq. (139) may be considered as a general result in canonical quantum mechanics (i.e. not accounting for the effects of gravity). As such, the arguments presented in [47], and hence the cubic MLUR (143), may be considered to have general validity for gravitating quantum mechanical systems.
Cubic MLURs of the form (143) (with β = 1) were also obtained in [33,34] by considering a gedanken experiment to measure the lengths of geodesics with minimum quantum uncertainty. This derivation relies on the fact that the mass of the measuring device M distorts the background spacetime. Equating the uncertainty in momentum of the device with the uncertainty in its mass then implies an irremovable uncertainty or 'fuzziness' in the space-time in the vicinity of the device itself. This results in an absolute minimum uncertainty in the precision with which a gravitating measuring device can measure the length of any given world-line, d.
As with the results proposed in [47], in this scenario the value β ∼ O(1) arises as a direct result of the assumption that the Schwarzschild radius of body of mass M, R S = 2G M/c 2 , represents the minimum classical 'gravitational uncertainty' in its position. In fact, for cubic MLURs of the form (143), it is usually assumed that β ∼ O(1) in most of the existing quantum gravity literature [5]. For all of the scenarios leading to Eq. (143) considered above, this is directly equivalent to assuming a minimum classical gravitational uncertainty, given by R S .
However, since Eq. (143) holds if and only if Eq. (142) also holds, it is straightforward to check that setting β = 1 is inconsistent with the requirement that quantum gravity effects, stemming from MLURs of the form (143), be subdominant to 'standard' quantum effects. Since quantum gravity has not been observed in the lab, we require ( x) min (β R 2 P d) 1/3 ≤h/(Mc), or, equivalently Substituting the minimization condition for x, Eq. (142), into this inequality then gives Clearly, for β ∼ O(1), this contradicts the weak gravitational limit of the theory, represented by Eq. (139), and which yields d ≥ ( x) min = R P . This implies that the arguments of Károlyházy et al. [33,34], which automatically assume β = 1, are also inconsistent with the weak field limit and the condition that quantum gravity effects from MLURs become subdominant to canonical quantum uncertainty in this regime. In fact, subsequent work has claimed that Károlyházy's quantum space-time MLUR is incompatible with observa-tions in yet another sense, in that it implies a vacuum energy density of the order of the neutron star density [35]. While it would be interesting to repeat the arguments presented in [35] using the more general relation, Eq. (143), and to consider the value of β required to reduce the neutron star density to the observed vacuum density, this task lies outside the scope of the present paper and is left to future work. However, for now, we note that only the more general relation (143), with β 1, is compatible with current observations. Although the arguments presented in this subsection do not allow us to fix the value of β, or even the minimum value of β required for consistency with the weak field limit, we note that they yield two conditions on the mass of the measuring device M in relation to the distance to be measured d, Eqs. (142) and (149), and that these relations involve only a single free constant. In the next subsection, we combine these with the condition relating the mass M and radius R of a gravitationally stable charged body, and explicitly consider an object of charge e and mass m e (i.e. an electron). In so doing, we see that the consistency of all three relations implies the identification of fundamental constants given in Eq. (15).

Quantum gravitational bounds for stable charged objects
One possible definition of the quantum gravity regime is the requirement that the positional uncertainty of an object, due to combined canonical quantum and gravitational effects, be greater than or equal to its classical radius, ( x) min ≥ R.
(This is essentially the inverse of the requirement for classicality: that the macroscopic radius of an object be larger than its quantum uncertainty.) Thus, the conditions correspond to a regime in which the 'particle' behaves quantum mechanically and gravitationally, but in which specific quantum gravitational effects are subdominant the standard Compton uncertainty. In this regime, we may therefore assume that where γ ≤ 1. Likewise, we may set where ξ ≥ 1, if we expect the object to display no classical behavior. Clearly, with equality holding if and only if γ = ξ = 1. For convenience, we now rewrite the three independent expressions we have obtained for M throughout the preceding sections of this work, namely  131), this is also the radius at which both the classical mass/radius ratio and the classical gravitational energy are both minimized.
We now investigate the properties of a charged particle for which the combined uncertainty (due to both canonical quantum and gravitational effects) and the classical mass/radius ratio and gravitational energy are minimized. Thus, we proceed by equating the three expressions for M in Eqs. (155a) and (155c). The physical picture is that we use a 'particle' of mass M and classical radius R as a probe to measure a distance d: the minimum uncertainty in the position of the particle is also the minimum uncertainty in the measurement of d.
Equations (155b) and (155c) immediately imply or, equivalently, This gives a nice (and self-consistent) interpretation of the Planck charge q P as the leading order contribution to a sum of terms that determine the maximum possible charge of a stable, gravitating, quantum mechanical object. The bound (157) may also be obtained in a more direct way by combining a general relativistic result with canonical quantum theory: rewriting Eq. (142) as Q 2 q 2 P R M/(M P R P ) and invoking a Compton-type relation between R and M (i.e. taking R to be the Compton radius of the sphere), yields exactly the same result.
For convenience, we now rewrite where R * is an arbitrary length scale. We note that, if β is independent of d, R * is simply proportional to d, but, if β ∝ d −1 , R * is a constant. (Also note that setting β ∝ d −1 would in no way alter the argument for the minimization of x with respect to M, proposed in Sect. 6.1.) Equations (155a)-(155c) then become and respectively, where M * = M P R P /R * . Equating the two then yields The expression for M, Eq. (160), also implies that the Compton wavelength of the particle is given by The self-consistent solution to Eqs. (155a)-(155c), written in terms of R * = βd (158), is therefore yielding where λ C =h/(Mc) and together with To summarize our results, we have shown that, to probe a distance d, given in terms of some length scale R * by Eq. (166), we can minimize the combined quantum mechanical and gravitational uncertainty inherent in the measurement of d by choosing an appropriate probe 'particle', with mass M, given by Eq. (165). This mass corresponds to a classical radius R given by Eq. (164). In addition, we found that the minimum value of the combined uncertainty, incorporating gravitational effects, is equal to the classical radius, ( x) min = R. [Alternatively, if we take a particle of mass M, given in terms of Q and M * = M P R P /R * by Eq. (165), the value of d obtained in Eq. (166) represents the length scale with is naturally 'probed' by such a particle, with minimum uncertainty ( x) min = R.] Mathematically, the three length scales λ C , ( x) min = R, and d, are related via We also showed that the Planck charge acts as a maximum possible charge for any stable, gravitating, quantum mechanical object, regardless of its mass M and associated Compton radius λ C . Therefore, for Q < q P , the positional uncertainty induced by quantum gravitational effects is strictly less than the Compton scale, for a stable body of any mass M.
Let us now reverse this argument by asking the following question: If we suppose that M represents the mass, not of a composite body, but of a true fundamental particle, what is the inherent length scale that such a particle can probe, with minimal uncertainty? To answer this question, we first note that, in order for M and Q in Eq. (165) to be constants of nature, R * must also be a constant of nature.
As a test case, let us now consider the electron by setting M = m e and Q = e, for which Eq. (167) recovers the well known relation r e = αλ e , were α ≈ 1/137 is the fine structure constant. For convenience, let us also associate R * with another universal constant, which we denote * , via the relation * := From Eq. (165), we then have * = 3 Evaluating this numerically gives * ≈ 1.4 × 10 −56 cm −2 , and we recall that is the value of the cosmological constant implied by various observations [23][24][25][26][27]. This strongly suggests the identification * = , R * = R W . We stress, however, that this identification is not based purely, or even primarily, on a numerical coincidence. Rather, our requirement that the total uncertainty x, incorporating canonical quantum and gravitational effects, be minimized for all stable bodies, including fundamental particles, requires the existence of a fundamental length scale in nature which is many orders of magnitude larger than the Planck length. Specifically, the minimization of the combined canonical quantum and gravitational uncertainty of the electron requires the existence of a fundamental constant, with dimensions L −2 , of the form (169). Formally identifying * = and substituting this back into Eq. (9), we obtain the bound Q 2 M 3h 2 G 2 c 6 1/6 ≈ e 2 m e = 2.52 × 10 8 Fr/g, (172) to leading order. The fulfillment of this condition therefore indicates the stability of a general, charged, gravitating, quantum mechanical object, as claimed. Finally, let us now consider the role of the length scale d, given by Eq. (166), when R * is a universal constant and so is Q. Combining this with the requirement that R * = βd, Eq. (158), we obtain the following expression for β: The preceding arguments, given in Sect. 6.1, then imply that the gravitational uncertainty of the particle is given by rather than ( x) grav ≈ R S = 2G M/c 2 , as assumed in [34,35,47]. This implies that an additional, self-consistent interpretation of the classical radius R of a charged object, is that it represents the minimum value of the classical gravitational 'disturbance' induced by the objects mass M.
As an additional check on the consistency of this result, we note that imposing the general condition β = R * /d on Eq. (141) yields Clearly, minimizing this expression with respect to M (i.e. treating M and d as independent variables), yields However, since the length scale that may be probed with minimum total uncertainty using a particle of canonical quantum width λ C is d = (Q 4 /q 4 P )λ C (Eq. 167), where Q 2 ≤ q 2 P , it is reasonable to ask, what happens in the 'canonical quantum limit', where d → λ C , so that d and M can no longer be considered independent variables? In this case, for a charged particle, Eq. (167) requires Q 2 = q 2 P , and Eq. (175) becomes We also note that, in the limit d → λ C , Eq. (173) implies R * → λ 3 C /R 2 P . Substituting these values into Eq. (175) yields and Since we require λ C R P , in order to avoid black hole formation, all quantities { x, R, d, R * , λ C } remain above the Planck scale in this limit.
Finally, before concluding this section, we note that Bronstein's bound (3) is also a form of cubic MLUR, which may be rewritten as after identifying x ≈ c t, where we have used the fact that ρ = M R −3 denotes the classical density. It is clear that this is compatible with our result, Eq. (167), only when M = M P . Thus, in general, our results are incompatible with those presented in [6]. Although Bronstein did not explicitly consider charged particles, so that our results are not directly comparable to his, the origin of the difference appears to lie the fact that his results imply the gravitational field of an object gives rise to an additional uncertainty in its momentum, of order ( p) grav ≈ Gρ 2 V x t. Though it is beyond the scope of the present work to investigate this discrepancy further, it would be interesting to consider extending Bronstein's original arguments to the case of charged bodies, to see whether they are compatible with those presented here.

MLUR and holography in arbitrary dimensions
In this section, we will demonstrate that the MLUR which represents the minimum possible uncertainty due to combined canonical quantum and gravitational effects, implies holography involving quantum gravity 'bits', in space-times with an arbitrary number of noncompact dimensions.
We have seen, in Sect. 6.1, that the minimum canonical quantum mechanical uncertainty is proportional to M −1/2 , where M is the mass of the object (cf. Eq. (175)). It was also shown in Sect. 4 that, for a given mass of a static object, its classical radius has a minimal possible value before the object collapses to form a black hole. (This because the ratio M/R D−3 has an upper bound; see also [36]). Thus, the minimum classical gravitational uncertainty is given by the minimum radius of the object, which is roughly the same as the horizon radius of the corresponding black hole. This is proportional to M 1/(D−3) in D dimensions. Therefore, the MLUR of the D-dimensional space-time can be expressed in the form where ζ , χ are positive constants. This expression contains the canonical quantum mechanical term and the classical gravitational term. By minimizing x with respect to M, we obtain the minimum length which corresponds to the mass For a measuring apparatus with size , the quantum mechanical uncertainty term and the classical gravitational term have parameters By using the D-dimensional Planck length we can express the maximum number of degrees of freedom in an D−1 volume as Remarkably, the result satisfies a holographic relation. Thus, the maximum number of degrees of freedom in a (D − 1)-dimensional volume is proportional to the (D − 2)dimensional 'area' of the boundary in which the volume is enclosed. Specifically, it is equal to the number of quantum gravity bits, ( /R P(D) ) D−2 , on the (D − 2)-dimensional surface. Hence, we prove that cubic MLURs, combining the minimum possible uncertainties arising from both canonical quantum and gravitational effects, inevitably lead to holography in arbitrary, noncompact, D-dimensional space-time.

Discussions and final remarks
In the present work, we have investigated the possibility of the existence of a minimum mass/radius ratio for charged, stable, compact general relativistic objects in arbitrary dimensions, in the presence of dark energy in the form of a cosmological constant. We have shown that for a static, spherically symmetric mass distribution, such a minimum ratio does indeed exist, and that it arises as a direct consequence of the Ddimensional Buchdahl inequality, which also gives rise to an upper bound for the mass/radius ratio.
In the case of the minimum mass/radius ratio, we obtained an explicit inequality giving the lower bound on M/R in arbitrary dimensions, as an explicit function of the charge Q and the D-dimensional cosmological constant D . In order to obtain both the upper and the lower bounds, we generalized the approach introduced in [36] for uncharged objects to include nonzero charge, Q = 0. For Q = 0, all our results reduce properly to the bounds obtained in [36].
In addition, we have investigated the condition of the thermodynamic stability for objects with minimum mass/radius ratio, which requires that they are in the minimum energy state. To estimate the total energy of these objects, we have used the definition of gravitational energy introduced in [42]. In D = 4 dimensions, imposing the condition of minimum stability, for charged objects with minimum mass/radius ratio, leads to an explicit expression, Eq. (126), in which the ratio of the square of the charge of the object to its mass is proportional to the radius, Q 2 /M ∝ R. The same bound was also obtained as a stability condition for charged bodies in [18].
We have also investigated the quantum implications of the existence of a classical minimum mass for charged objects in four space-time dimensions, by starting from a series of quantum gravity arguments that give rise to cubic MLURs of the form x ≥ ( x) min = (β R 2 P d) 1/3 , Eq. (143), where β is positive numerical constant which is related to the positional uncertainty of the object induced by its gravitational field. In these approaches, x represents not only the uncertainty in the position of the object, but also the irremovable quantum uncertainty inherent in any measurement of the physical length d.
We have combined the mass minimization condition, giving rise to the cubic MLURs, with phenomenological results from canonical quantum mechanics, namely, the existence of a minimum (canonical) quantum radius (the Compton radius), and have considered objects subject to the minimum mass/radius bound for charged bodies (10). By combining all three mass bounds, we have obtained the condition for quantum gravitational stability of a charged particle, Q 2 /M 3h 2 G 2 c 6 / 1/6 ≈ e 2 /m e = 2.52 × 10 8 Fr/g, Eq. (172). Physically, we may interpret this as meaning that, if the electron were any less massive (for fixed charge e), or more highly charged (for fixed mass m e ), a combination of electrostatic and dark energy repulsion would lead to instability. In other words, the electron would blow itself apart, as claimed in the Introduction. In addition, saturation of this condition yields an expression for in terms of the constants {c,h, G, e, m e }, given by Eq. (15).
Specifically, by combining the mass bound obtained from purely classical considerations with the cubic MLURs, moti-vated by quantum gravity, and applying the result to body of charge e and mass m e (i.e. an electron), we obtained a prediction of a 'new' constant of nature, * , which may be expressed in terms of other fundamental constants. Physically, the existence of this constant is required in order to ensure the consistency of MLURs with the weak field limit of canonical quantum theory and with the classical stability bounds for charged, gravitating 'particles'. Evaluating * numerically, we have shown that it has the same order of magnitude value as the observed cosmological constant, which motivates the identification * ≡ ≈ 10 56 cm −2 . Crucially, this implies that, if the cosmological constant can be expressed as a function of the set of the 'standard' constants {c,h, G, e, m e }, it cannot be interpreted as a fundamental constant of nature.
It is also interesting to note that the cubic MLURs used in this work, which, together with the classical stability bounds obtained for charged objects, imply a fundamental relationship between the existence of the cosmological constant and the stability of fundamental particles, also imply the existence of a holographic relationship between the maximum number of degrees of freedom in a bulk space-time and the number of quantum gravity 'bits' on the boundary. This is proved explicitly, for arbitrary D-dimensional space-times (with noncompact dimensions), in Sect. 6.3.
Finally, we note that the formalism developed in this paper can be easily extended to the case of non-electromagnetic interactions. For example, by interpreting the charge Q as a generalized charge, corresponding to a Yang-Mills field, we can apply our results even to the case of strongly interacting particles, based on the fundamental QCD Lagrangian [51] L QCD = 1 4 a F a μν F aμν where the subscript f denotes the various quark flavors u, d, s etc., and the corresponding quark masses m f . The nonlinear gluon field strength is defined as In Eqs. (187) and (188), ψ is the (spinor) wave function of the quarks, γ μ are the Dirac matrices, f abc are the structure constants of the group SU(3), and α s is the strong interaction coupling constant. In the first order perturbation theory, one can neglect the quark masses, so that the equation of state for zero temperature quark matter can be obtained [51,52]: where B is interpreted physically as the difference between the energy density of the perturbative and non-perturbative QCD vacua (the bag constant), while ρ q and p q denote the energy density and thermodynamic pressure of the quark matter, respectively. Equation (189) [51,52]. On the other hand, after a neutron matter-quark matter phase transition, which can take place, for example, in the dense core of neutron stars, the energy density of strange quark matter is of the order of ρ q ≈ 5 × 10 14 g/cm 3 . However, it is important to note that, in the case of the QCD description of strong interactions, the strong coupling constant α s is a function of the particle (i.e. quark) momenta, and of their energy density. For the simplest hadronic models, the quark-gluon coupling constant is of the order of α s ≈ 0.12 [51]. If we define the generalized QCD charge as Q QCD ≈ α 1/2 s , we may obtain an estimate for the mass of a quark, interpreted as an electric and color-charged particle having a minimum mass/radius ratio by applying the formalism developed in this paper and identifying the constant * with B, where B is the bag constant introduced in the simple MIT bag model, Eq. (189). This yields a value of order m q ≈ 67.75 MeV [18], which represents a reasonable approximation to the predicted mass of the s quark [52].