Probing the top-Higgs coupling through the secondary lepton distributions in the associated production of the top-quark pair and Higgs boson at the LHC

We complement the analysis of the anomalous top-Higgs coupling effects on the secondary lepton distributions in the associated production of the top-quark pair and Higgs boson in proton-proton collisions at the LHC of the former work by one of the present authors by taking into account the quark-antiquark production mechanism. We also present simple arguments which explain why the effects of the scalar and pseudoscalar anomalous couplings on the unpolarized cross section of the process are completely insensitive to the sign of either of them.


Introduction
Determination of the coupling of the recently discovered Higgs boson [1] to the top quark currently belongs to one of the most challenging tasks of the high energy experimental physics. Measurement of the associated production of the top quark pair and Higgs boson in the clean experimental environment of e + e − collisions was considered in this context already more than two decades ago [2], [3], but different projects of the high energy e + e − collider [4]- [11], despite some of them being more or less intensively discussed for years, are still at a rather early stage of TDR. However, if the LHC performance in next runs is as excellent as it was in run 1 we may expect that the process the search for which, based on run 1 data, were already reported by both the CMS [12] and ATLAS [13] collaborations, will be measured quite precisely. This is why in the past few years the associated production of the top quark pair and Higgs boson has invoked quite some interest also from a theoretical side, see, e.g., [14]- [21].
It was shown in Ref. [15] that the distributions in rapidity and angles of the secondary lepton that can be produced in the decay oft-quark of process (1) are quite sensitive to modifications of the top-Higgs coupling. Actually, only the gluon fusion mechanism of ttH production, which is dominant at the LHC energies, and one specific decay channel: t → bW + → bud, t →bW − →bµ −ν µ and h → bb, were taken into account in Ref. [15], i.e., the following hard parton scattering processes was considered. There are 67 300 Feynman diagrams of process (2) already in the leading order (LO) of the standard model (SM) in the unitary gauge, if the Cabibbo-Kobayashi-Maskawa mixing and masses smaller than the b-quark mass m b are neglected. At the same time there are only 32 Feynman diagrams which contribute to the signal cross section of ttH production, two of which are shown in Fig. 1. The remaining 30 signal diagrams are obtained from those depicted by attaching the Higgs boson line of Hbb-vertex to the other t-ort-quark line, or interchanging the b andb quarks in Figs. 1(a) and 1(b) and interchanging the two gluons in Fig. 1(b). The diagrams with the Higgs boson line of Hbb-vertex attached to either the b-orb-quark line are not counted here, as their contribution to the ttH production signal is suppressed by the mass ratio m b /m t . The effects caused by modifications of the scalar and pseudoscalar couplings of the Higgs boson to top quark were clearly visible in the ttH production signal cross section, but they were to large degree obscured by the interference of the ttH production signal diagrams with the diagrams of irreducible off resonance background.
In the present work, we complement the analysis of the influence of the anomalous Higgs boson coupling to top quark on the secondary lepton distributions in the process of associated production of the top quark pair and Higgs boson in proton-proton collisions at the LHC of Ref. [15] by taking into account the quark-antiquark annihilation hard scattering processes with the same final state as that of process (2): Figure 1: Feynman diagrams of ttH production in process (2). Blobs indicate the Higgs-top coupling.
with q = u, d. To be more specific, we take into account uū-,ūu-, dd-anddd-scattering processes. Under the same assumptions as those made above for process (2), there are 78 068 Feynman diagrams in the LO of SM for each of the qq-scattering processes considered. However, only 24 of them contribute to the signal of the ttH production. Examples of the signal diagrams of the process of uū-scattering to the final state of process (3) are shown in Fig. 2.
The other signal diagrams can be obtained by attaching the Higgs boson line of the Hbb-vertex ū u gb tν to the other t-ort-quark line or interchanging the b-andb-quark lines in the diagrams of Fig. 2. Let us note that another 24 diagrams which contain the Feynman propagators of the t-, t-quark and the Higgs boson at a time can be obtained from the signal diagrams just described by the exchange of the u-quark lines between the initial and final state. However, they are not treated as the signal diagrams here, because they contain the gluon, Z 0 or photon propagator in the t-or u-channel and their contribution to the signal cross section is negligible anyway, which has been checked by direct computation.
The rest of the article is organized in the following way. The possible effect of the anomalous top-Higgs coupling on the unpolarized cross section of the process of ttH production at the LHC are analyzed in Section 2, our results are presented in Section 3 and, finally, some concluding remarks are contained in Section 4.

Effects of the anomalous top-Higgs coupling
The most general top-Higgs coupling is given by the following Lagrangian [22]: where GeV, is the top-Higgs Yukawa coupling and the real couplings f and f ′ describe, respectively, the scalar and pseudoscalar departures from the purely scalar top-Higgs Yukawa coupling of SM, which is reproduced for f = 1 and f ′ = 0. The allowed regions of the (f, f ′ ) plane, according to the analysis of Ref. [16] performed at the 68 and 95% confidence level, are plotted in Fig. 1 of Ref. [17]. They are derived from the constraints on the Hgg and Hγγ couplings from the Higgs boson production and its decay into γγ, which among others involve assumptions on the Higgs boson couplings to other fermions and bosons, and hence are model dependent. Therefore, we will not stick to them in the next section, where we will illustrate the effects of f ′ on the process of associated production of the top quark pair and Higgs boson from which the direct constraints on f and f ′ can be derived.
where h is a scalar representing a product of the Higgs boson propagator carrying the four momentum q with the Hbb-vertex, u (v) is the Dirac spinor representing the off-shell t-quark (t-quark) of the four momentum p t (pt) that decays into the b-quark (b-quark) and off-shell W + (W − )-boson, ε is a polarization four vector representing the gluon propagator contracted with the uūg-vertex, g s is the strong coupling constant and is a complex mass parameter that replaces the mass m t in the top quark propagator in order to regularize the pole arising if its denominator approaches zero. After some simple algebra Eqs. (5) and (6) can be written in the following form: Now, let us note that, as in the process of ttH production in e + e − collisions that was considered in Ref. [14], the dominant contribution to the cross section comes from the phase space region, where both the t-quark andt-quark are close to their mass shells and hence the off-shell spinors u and v should satisfy the following approximate equations: Using Eqs. (9) in (7) and (10) in (8), and neglecting terms ∼ Γ t in the numerators, we get the following approximate expressions for the amplitudes: and for a sum of the two: In order to calculate the sum over polarizations of the squared module of the matrix element pol. |M a | 2 , we take into account the approximate completeness relations for the spinors u and v: pol.
and note that the off-shell polarization four vectors ε are real, as they are defined in the following way: where the helicity spinors v( p 1 , λ 1 ) and u( p 2 , λ 2 ) of, respectively, theū-and u-quark in initial state, which are calculated according to Eqs. (5) and (6) of Ref. [25], are real if the momenta p 1 and p 2 are antiparallel. Thus pol.
More simplified analytic form of Eq. (16) is irrelevant, as the calculation of the cross section will be performed numerically anyway, but let us note that only the terms on the r.h.s. of Eq. (16) that contain γ 5 may be proportional to the product f f ′ . However, if we use the relation ε /p t / ε / = −ε 2 p t / + 2(p t · ε)ε / in the second and third term and the relation q /p t / q / = −q 2 p t / + 2(p t · q)q / in the second term, and then use the relation in the last term on the r.h.s. of Eq. (16), we see that the dependence on f f ′ , and thus a sensitivity to the sign of either f or f ′ , disappears in the unpolarized cross section of the hard scattering process uū → budbµ −ν µ bb. Let us note, that the same arguments can be easily repeated for the amplitudes of the Feynman diagrams of Fig. 1, which dominate the ttH production through the gluon fusion process (2). We would like to stress here that all the above approximations are used for the sake of the argument in this section only and are not used to obtain the full results presented in Section 3.

Results
The calculation is performed in the framework of the SM, supplemented with the top-Higgs coupling derived from Lagrangian (4), with the use of carlomat [23], a general purpose program for the MC computation of the lowest order cross sections. The differential cross section of the process pp → budbµ −ν µ bb (18) is calculated with the use of the following factorization formula  in the sum. We use MSTW LO parton distribution functions [24] at the factorization scale Q = m 2 t + j p 2 T j , where p T j is the transverse momentum of the final state quark or antiquark of process (18). The calculation is performed separately for the gluon fusion (2) and each of the quark-antiquark hard scattering processes (3). We use the same physical input parameters and cuts (3.2)-(3.7), with m cut bb = 20 GeV in (3.7), as in Ref. [15], and three different combinations of the scalar and pseudoscalar couplings of Lagrangian (4) Let us note, that in order to calculate the total cross section of process (18), a 20-fold phase space integral and a 2-fold integral over parton density functions must be performed, not to mention the additional 9-fold Monte Carlo (MC) integral that replaces the sum over particle helicities, without which the computation would not have been feasible in practice.
The differential cross sections of process (18) at the proton-proton center of mass energy of

Conclusions
We have complemented the analysis of the influence of the anomalous Higgs boson coupling to top quark on the secondary lepton distributions in the process of associated production of the top quark pair and Higgs boson in the proton-proton collisions at the LHC of Ref. [15] by taking into account contributions of the quark-antiquark annihilation hard scattering processes. Although, the gluon fusion mechanism dominates the ttH production through process (18) at √ s = 14 TeV, the contribution of quark-antiquark hard scattering processes (3) is quite substantial and, therefore, should be taken into account in the analyses of data. Moreover, we have explained why the effects of the scalar and pseudoscalar anomalous couplings in the unpolarized cross section of the process are completely insensitive to the sign of either of them.