Skip to main content
SpringerLink
Log in

Optimizing the Performance of Vertically-Mounted Jet Fans in Ventilation Shafts

  • Published:
Mining, Metallurgy & Exploration Aims and scope Submit manuscript

Abstract

By offering savings in space and capital cost compared to fully ducted axial and centrifugal fan systems, horizontally-mounted jet fans are commonly used worldwide to ventilate vehicular tunnels. They discharge high-velocity jets to transfer momentum to the surrounding airstream to induce longitudinal flow in the same direction as the jet. Vertically-mounted jet fans installed in exhaust ventilation shafts have also been successfully used to ventilate a large passenger rail overbuild in New York City. A total of 28 jet fans are installed in 11 shafts constructed above two passenger rail line tracks. Jet fans require a length of downstream shaft in which to transfer momentum to the surrounding air. A comparison of overbuild shaft dimensions, vertical placement of the jet fans, and measured shaft airflows is presented. Measured shaft airflows are compared to airflows predicted by computational fluid dynamics (CFD) simulations of a three-dimensional model of the overbuild.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  1. Bechtel/Parsons Brinckerhoff (1999) Memorial tunnel fire ventilation test program, phase IV report: 198 pp. Bechtel/Parsons Brinckerhoff. New York

  2. Betta V, Cascetta F, Musto M, Rotondo G (2010) Numerical study of the optimization of the pitch angles of an alternative jet fan in a longitudinal tunnel ventilation system. Tunnelling and Underground Space Technology: 164–172

  3. Chen T, Li Y, Xu Z, Kong J, Liang Y, Wang B, Fan C (2019) Study of the optimal pitch angle of jet fans in road tunnels based on turbulent jet theory and numerical simulation. Building and Environment: 165

  4. Chen T, Zhou D, Lu Z, Zhisheng X, Wang B (2021) Study of the applicability and optimal arrangement of alternative jet fans in curved road tunnel complexes. Tunnelling and Underground Space Technology: 108

  5. Jacques E, Wauters P (1999) Improving the ventilation efficiency of jet fans in longitudinally ventilated rectangular ducts. In J. Tien (ed.), Proceedings of the 8th U.S./North American Mine Ventilation Symposium: 503–507. University of Missouri-Rolla

  6. Maevski I, Fay J (2002) Portal jet fan performance for tunnel smoke extraction. In Proceedings of the Fourth International Conference of Tunnel Fires: 125–139. Basel, Switzerland. Kempston, UK: Independent Technical Conferences LTD

  7. National Fire Protection Association (2017) NFPA 130: standard for fixed guideway transit and passenger rail systems: 130–22 - 130–24. Quincy, MA

  8. Pie G, Pan J (2014) Numerical study on different series modes of jet fan in a longitudinal tunnel system. Mathematical Problems in Engineering: 9 pp. Hindawi Publishing Corporation

  9. Ray RE (2019) Incorporating ventilation fan plants in rail and vehicular roadway overbuilds. In A. Madiseh, A. Sasmito, F. Hassani & J. Stachulak (eds), Proceedings of the 17th U.S./North American Mine Ventilation Symposium: 464–473. Montreal: Canadian Institute of Mining, Metallurgy and Petroleum

  10. Ray RE, Fuster E (2019) Use of reversible jet fans in shafts for push-pull emergency ventilation. In A. Madiseh, A. Sasmito, F. Hassani & J. Stachulak (eds), Proceedings of the 17th U.S./North American Mine Ventilation Symposium: 474–484. Montreal: Canadian Institute of Mining, Metallurgy and Petroleum

  11. Ray RE, Fuster E, Lee S (2021) Optimizing vertically-mounted jet fans in ventilation shafts for a rail overbuild. In P. Tukkaraja (ed.), Proceedings of the 18th U.S./North American Mine Ventilation Symposium: 280–288. CRC Press/Balkema: Leidan, The Netherlands

  12. Ray RE, Gilbey MJ, Kumar P (2008) The application of vertically-mounted jet fans in ventilation shafts for a rail overbuild. In K. G. Wallace (ed.), Proceedings of the 12th U.S./North American Mine Ventilation Symposium: 415–423. University of Nevada, Reno

  13. Ray RE, Kang K, Gilbey M (2004) CFD analysis of diesel emissions in a railroad tunnel. In R. Ganguli & S. Bandopadhyay (eds), Proceedings of the 10th U.S./North American Mine Ventilation Symposium: 117–126. A.A. Balkema: Leiden, The Netherlands

  14. Taberra M, Bennett EC, Mathews RD (1995) Optimizing jet fan performance in longitudinally ventilated rectangular tunnels. In Separated and Complex Flows. Vol. 217, 35–42. The American Society of Mechanical Engineers

  15. Witt KC, Schütze J (2008) Effective thrust transformation inside tunnel with jet fans (Banana Jet). In: Sturm P, Minarik S (eds) 4th International Conference - Tunnel Safety and Ventilation – New Developments in Tunnel Safety. Graz University of Technology, Herausgeber, pp 74–81

    Google Scholar 

  16. Woods Air Movement Ltd (1998) Jetfoil & large JM aerfoil fans for tunnel ventilation. Colchester, Woods Air Movement Ltd, pp 305–311

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. WSP USA Inc., New York, NY, USA

    Richard Ray Jr, Ethan Fuster & Stephen Lee

Authors
  1. Richard Ray Jr
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Ethan Fuster
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Stephen Lee
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Richard Ray Jr.

Ethics declarations

Conflict of Interest

The authors declare no competing interests.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Ray, R., Fuster, E. & Lee, S. Optimizing the Performance of Vertically-Mounted Jet Fans in Ventilation Shafts. Mining, Metallurgy & Exploration 39, 927–936 (2022). https://doi.org/10.1007/s42461-022-00568-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s42461-022-00568-2

Search

Navigation