Abstract
Lithium-ion and sodium-ion batteries are widely regarded as green energy storage power devices to support the development of modern electronic and information technology systems. Therefore, the design of advanced cathode and anode materials with higher energy and power densities is crucial to satisfy the increasing demand for next-generation high-performance batteries. To address this, researchers have explored metal–organic frameworks that possess extremely large surface areas, uniform ordered pores and controllable functional groups for application in the fields of energy storage, adsorption, catalysis, separation, etc. In addition, multi-metal–organic frameworks (MMOFs) and their derivatives have also been reported to provide better tunability to allow for the control of size, porosity, structure and composition, resulting in enhanced electronic and ion conductivities and richer redox chemistries at desirable potentials. Moreover, the synergistic effects between two or more metal components in MMOFs and their derivatives can accommodate large volume expansions during stepwise Li-/Na-ion insertion and extraction processes to allow for the improvement of structural stability in electrodes as well as enhanced cyclability. Based on all of this, this review will discuss and summarize the most recent progress in the synthesis, electrochemical performance and design of MMOFs and their derivatives. In addition, future trends and prospects in the development of MMOF-based materials and their application as high-performance Li/Na storage electrode materials are presented.
Graphic Abstract
Recent advances in multi-metal–organic frameworks and their derived materials for applications in lithium-/sodium-ion batteries are summarized and critically discussed.
Similar content being viewed by others
References
Choi, J.W., Aurbach, D.: Promise and reality of post-lithium-ion batteries with high energy densities. Nat. Rev. Mater. 1, 16013 (2016). https://doi.org/10.1038/natrevmats.2016.13
Yu, L., Hu, H., Wu, H.B., et al.: Complex hollow nanostructures: synthesis and energy-related applications. Adv. Mater. 29, 1604563 (2017). https://doi.org/10.1002/adma.201604563
Ungurean, L., Cârstoiu, G., Micea, M.V., et al.: Battery state of health estimation: a structured review of models, methods and commercial devices. Int. J. Energy Res. 41, 151–181 (2017). https://doi.org/10.1002/er.3598
Chen, G., Yan, L.T., Luo, H.M., et al.: Nanoscale engineering of heterostructured anode materials for boosting lithium-ion storage. Adv. Mater. 28, 7580–7602 (2016). https://doi.org/10.1002/adma.201600164
Liu, X., Huang, J.Q., Zhang, Q., et al.: Nanostructured metal oxides and sulfides for lithium–sulfur batteries. Adv. Mater. 29, 1601759 (2017). https://doi.org/10.1002/adma.201601759
Li, Y.S., Shi, J.L.: Hollow-structured mesoporous materials: chemical synthesis, functionalization and applications. Adv. Mater. 26, 3176–3205 (2014). https://doi.org/10.1002/adma.201305319
Jokar, A., Rajabloo, B., Désilets, M., et al.: Review of simplified pseudo-two-dimensional models of lithium-ion batteries. J. Power Sources 327, 44–55 (2016). https://doi.org/10.1016/j.jpowsour.2016.07.036
Zheng, J.X., Lu, J., Amine, K., et al.: Depolarization effect to enhance the performance of lithium ions batteries. Nano Energy 33, 497–507 (2017). https://doi.org/10.1016/j.nanoen.2017.02.011
Hwang, J.Y., Myung, S.T., Sun, Y.K.: Sodium-ion batteries: present and future. Chem. Soc. Rev. 46, 3529–3614 (2017). https://doi.org/10.1039/c6cs00776g
Luo, W., Shen, F., Bommier, C., et al.: Na-ion battery anodes: materials and electrochemistry. Acc. Chem. Res. 49, 231–240 (2016). https://doi.org/10.1021/acs.accounts.5b00482
Liu, Y.C., Liu, X.B., Wang, T.S., et al.: Research and application progress on key materials for sodium-ion batteries. Sustain. Energy Fuels 1, 986–1006 (2017). https://doi.org/10.1039/c7se00120g
Hou, H., Qiu, X., Wei, W., et al.: Carbon anode materials for advanced sodium-ion batteries. Adv. Energy Mater. 7, 1602898 (2017). https://doi.org/10.1002/aenm.201602898
Zhao, C.L., Lu, Y.X., Li, Y.M., et al.: Novel methods for sodium-ion battery materials. Small Methods 1, 1600063 (2017). https://doi.org/10.1002/smtd.201600063
Wang, J., He, X., Paillard, E., et al.: Lithium- and manganese-rich oxide cathode materials for high-energy lithium ion batteries. Adv. Energy Mater. 6, 1600906 (2016). https://doi.org/10.1002/aenm.201600906
Peng, L.L., Zhu, Y., Chen, D.H., et al.: Two-dimensional materials for beyond-lithium-ion batteries. Adv. Energy Mater. 6, 1600025 (2016). https://doi.org/10.1002/aenm.201600025
Sheng, T., Xu, Y.F., Jiang, Y.X., et al.: Structure design and performance tuning of nanomaterials for electrochemical energy conversion and storage. Acc. Chem. Res. 49, 2569–2577 (2016). https://doi.org/10.1021/acs.accounts.6b00485
Hou, P.Y., Zhang, H.Z., Zi, Z.Y., et al.: Core–shell and concentration-gradient cathodes prepared via co-precipitation reaction for advanced lithium-ion batteries. J. Mater. Chem. A 5, 4254–4279 (2017). https://doi.org/10.1039/c6ta10297b
Chen, P., Wu, F.D., Wang, Y.: Four-layer tin-carbon nanotube yolk-shell materials for high-performance lithium-ion batteries. Chemsuschem 7, 1407–1414 (2014). https://doi.org/10.1002/cssc.201301198
Rahman, M.A., Song, G.S., Bhatt, A.I., et al.: Nanostructured silicon anodes for high-performance lithium-ion batteries. Adv. Funct. Mater. 26, 647–678 (2016). https://doi.org/10.1002/adfm.201502959
Xu, J., Lin, F., Doeff, M.M., et al.: A review of Ni-based layered oxides for rechargeable Li-ion batteries. J. Mater. Chem. A 5, 874–901 (2017). https://doi.org/10.1039/c6ta07991a
Yu, S.H., Lee, S.H., Lee, D.J., et al.: Conversion reaction-based oxide nanomaterials for lithium ion battery anodes. Small 12, 2146–2172 (2016). https://doi.org/10.1002/smll.201502299
Yuan, C.Z., Wu, H.B., Xie, Y., et al.: Mixed transition-metal oxides: design, synthesis, and energy-related applications. Angew. Chem. Int. Ed. 53, 1488–1504 (2014). https://doi.org/10.1002/anie.201303971
Guo, L., Wang, Y.: New Cr2Mo3O12-based anodes: morphology tuning and Li-storage properties. J. Mater. Chem. A 3, 15030–15038 (2015). https://doi.org/10.1039/c5ta03256c
Guan, B.Q., Sun, W.W., Wang, Y.: Carbon-coated MnMoO4 nanorod for high-performance lithium-ion batteries. Electrochim. Acta 190, 354–359 (2016). https://doi.org/10.1016/j.electacta.2016.01.008
Guo, L., Wang, Y.: Standing carbon-coated molybdenum dioxide nanosheets on graphene: morphology evolution and lithium ion storage properties. J. Mater. Chem. A 3, 4706–4715 (2015). https://doi.org/10.1039/c4ta05520a
Billaud, J., Clément, R.J., Armstrong, A.R., et al.: β-NaMnO2: a high-performance cathode for sodium-ion batteries. J. Am. Chem. Soc. 136, 17243–17248 (2014). https://doi.org/10.1021/ja509704t
Xu, X.D., Liu, W., Kim, Y., et al.: Nanostructured transition metal sulfides for lithium ion batteries: progress and challenges. Nano Today 9, 604–630 (2014). https://doi.org/10.1016/j.nantod.2014.09.005
Jin, F.Y., Wang, Y.: Topotactical conversion of carbon coated Fe-based electrodes on graphene aerogels for lithium ion storage. J. Mater. Chem. A 3, 14741–14749 (2015). https://doi.org/10.1039/c5ta03605d
Lei, Z.D., Zhan, J., Tang, L., et al.: Recent development of metallic (1T) phase of molybdenum disulfide for energy conversion and storage. Adv. Energy Mater. 8, 1703482 (2018). https://doi.org/10.1002/aenm.201703482
Yu, X.Y., Yu, L., Shen, L.F., et al.: General formation of MS (M = Ni, Cu, Mn) box-in-box hollow structures with enhanced pseudocapacitive properties. Adv. Funct. Mater. 24, 7440–7446 (2014). https://doi.org/10.1002/adfm.201402560
Zielinski, M.S., Choi, J.W., La Grange, T., et al.: Hollow mesoporous plasmonic nanoshells for enhanced solar vapor generation. Nano Lett. 16, 2159–2167 (2016). https://doi.org/10.1021/acs.nanolett.5b03901
Shen, L.F., Yu, L., Wu, H.B., et al.: Formation of nickel cobalt sulfide ball-in-ball hollow spheres with enhanced electrochemical pseudocapacitive properties. Nat. Commun. 6, 6694 (2015). https://doi.org/10.1038/ncomms7694
Qin, J., Zhao, N.Q., Shi, C.S., et al.: Sandwiched C@SnO2@C hollow nanostructures as an ultralong-lifespan high-rate anode material for lithium-ion and sodium-ion batteries. J. Mater. Chem. A 5, 10946–10956 (2017). https://doi.org/10.1039/c7ta01936j
Xiao, S., Liu, S.H., Zhang, J.Q., et al.: Polyurethane-derived N-doped porous carbon with interconnected sheet-like structure as polysulfide reservoir for lithium-sulfur batteries. J. Power Sources 293, 119–126 (2015). https://doi.org/10.1016/j.jpowsour.2015.05.048
Jin, F.Y., Xiao, S., Lu, L.J., et al.: Efficient activation of high-loading sulfur by small CNTs confined inside a large CNT for high-capacity and high-rate lithium–sulfur batteries. Nano Lett. 16, 440–447 (2016). https://doi.org/10.1021/acs.nanolett.5b04105
Zhao, Y., Wang, L.P., Sougrati, M.T., et al.: A review on design strategies for carbon based metal oxides and sulfides nanocomposites for high performance Li and Na ion battery anodes. Adv. Energy Mater. 7, 1601424 (2017). https://doi.org/10.1002/aenm.201601424
Peng, S.J., Li, L.L., Lee, J.K.Y., et al.: Electrospun carbon nanofibers and their hybrid composites as advanced materials for energy conversion and storage. Nano Energy 22, 361–395 (2016). https://doi.org/10.1016/j.nanoen.2016.02.001
He, Y.Z., Han, X.J., Du, Y.C., et al.: Heteroatom-doped carbon nanostructures derived from conjugated polymers for energy applications. Polymers 8, 366 (2016). https://doi.org/10.3390/polym8100366
Sun, W.W., Wang, Y.: Graphene-based nanocomposite anodes for lithium-ion batteries. Nanoscale 6, 11528–11552 (2014). https://doi.org/10.1039/c4nr02999b
Roberts, A.D., Li, X., Zhang, H.F.: Porous carbon spheres and monoliths: morphology control, pore size tuning and their applications as Li-ion battery anode materials. Chem. Soc. Rev. 43, 4341–4356 (2014). https://doi.org/10.1039/c4cs00071d
Keppeler, M., Shen, N., Nageswaran, S., et al.: Synthesis of α-Fe2O3/carbon nanocomposites as high capacity electrodes for next generation lithium ion batteries: a review. J. Mater. Chem. A 4, 18223–18239 (2016). https://doi.org/10.1039/c6ta08456g
Kim, H., Lah, M.S.: Templated and template-free fabrication strategies for zero-dimensional hollow MOF superstructures. Dalton Trans. 46, 6146–6158 (2017). https://doi.org/10.1039/c7dt00389g
Sun, D.R., Ye, L., Sun, F.X., et al.: From mixed-metal MOFs to carbon-coated core-shell metal alloy@metal oxide solid solutions: transformation of Co/Ni-MOF-74 to CoxNi1−x@CoYNi1–YO@C for the oxygen evolution reaction. Inorg. Chem. 56, 5203–5209 (2017). https://doi.org/10.1021/acs.inorgchem.7b00333
Kaneti, Y.V., Tang, J., Salunkhe, R.R., et al.: Nanoarchitectured design of porous materials and nanocomposites from metal–organic frameworks. Adv. Mater. 29, 1604898 (2017). https://doi.org/10.1002/adma.201604898
Yang, X.Y., Chen, L.H., Li, Y., et al.: Hierarchically porous materials: synthesis strategies and structure design. Chem. Soc. Rev. 46, 481–558 (2017). https://doi.org/10.1039/c6cs00829a
Li, B., Wen, H.M., Zhou, W., et al.: Porous metal–organic frameworks: promising materials for methane storage. Chem 1, 557–580 (2016). https://doi.org/10.1016/j.chempr.2016.09.009
Pei, X.K., Chen, Y.F., Li, S.Q., et al.: Metal–organic frameworks derived porous carbons: syntheses, porosity and gas sorption properties. Chin. J. Chem. 34, 157–174 (2016). https://doi.org/10.1002/cjoc.201500760
Yaghi, O.M., Li, H.L.: Hydrothermal synthesis of a metal–organic framework containing large rectangular channels. J. Am. Chem. Soc. 117, 10401–10402 (1995). https://doi.org/10.1021/ja00146a033
Howarth, A.J., Liu, Y.Y., Li, P., et al.: Chemical, thermal and mechanical stabilities of metal-organic frameworks. Nat. Rev. Mater. 1, 15018 (2016). https://doi.org/10.1038/natrevmats.2015.18
Qin, J.S., Yuan, S., Wang, Q., et al.: Mixed-linker strategy for the construction of multifunctional metal-organic frameworks. J. Mater. Chem. A 5, 4280–4291 (2017). https://doi.org/10.1039/c6ta10281f
Nath, I., Chakraborty, J., Verpoort, F.: Metal organic frameworks mimicking natural enzymes: a structural and functional analogy. Chem. Soc. Rev. 45, 4127–4170 (2016). https://doi.org/10.1039/c6cs00047a
Ahmed, I., Jhung, S.H.: Applications of metal-organic frameworks in adsorption/separation processes via hydrogen bonding interactions. Chem. Eng. J. 310, 197–215 (2017). https://doi.org/10.1016/j.cej.2016.10.115
Andirova, D., Cogswell, C.F., Yu, L., et al.: Effect of the structural constituents of metal organic frameworks on carbon dioxide capture. Micropor. Mesopor. Mater. 219, 276–305 (2016). https://doi.org/10.1016/j.micromeso.2015.07.029
Dhakshinamoorthy, A., Asiri, A.M., García, H.: Metal–organic framework (MOF) compounds: photocatalysts for redox reactions and solar fuel production. Angew. Chem. Int. Ed. 55, 5414–5445 (2016). https://doi.org/10.1002/anie.201505581
Kreno, L.E., Leong, K., Farha, O.K., et al.: Metal–organic framework materials as chemical sensors. Chem. Rev. 112, 1105–1125 (2012). https://doi.org/10.1021/cr200324t
Fu, Y.H., Xu, L., Shen, H.M., et al.: Tunable catalytic properties of multi-metal–organic frameworks for aerobic styrene oxidation. Chem. Eng. J. 299, 135–141 (2016). https://doi.org/10.1016/j.cej.2016.04.102
Furukawa, H., Cordova, K.E., O’Keeffe, M., et al.: The chemistry and applications of metal–organic frameworks. Science 341, 1230444 (2013). https://doi.org/10.1126/science.1230444
Kumar, P., Kim, K.H., Kim, Y.H., et al.: A review of metal organic resins for environmental applications. J. Hazard. Mater. 320, 234–240 (2016). https://doi.org/10.1016/j.jhazmat.2016.08.037
Ahmed, I., Jhung, S.H.: Adsorptive desulfurization and denitrogenation using metal–organic frameworks. J. Hazard. Mater. 301, 259–276 (2016). https://doi.org/10.1016/j.jhazmat.2015.08.045
Sumida, K., Rogow, D.L., Mason, J.A., et al.: Carbon dioxide capture in metal–organic frameworks. Chem. Rev. 112, 724–781 (2012). https://doi.org/10.1021/cr2003272
Wales, D.J., Grand, J., Ting, V.P., et al.: Gas sensing using porous materials for automotive applications. Chem. Soc. Rev. 44, 4290–4321 (2015). https://doi.org/10.1039/c5cs00040h
Chen, B.L., Xiang, S.C., Qian, G.D.: Metal–organic frameworks with functional pores for recognition of small molecules. Acc. Chem. Res. 43, 1115–1124 (2010). https://doi.org/10.1021/ar100023y
Barea, E., Montoro, C., Navarro, J.A.R.: Toxic gas removal-metal–organic frameworks for the capture and degradation of toxic gases and vapours. Chem. Soc. Rev. 43, 5419–5430 (2014). https://doi.org/10.1039/c3cs60475f
Lin, Y.C., Kong, C., Zhang, Q.J., et al.: Metal–organic frameworks for carbon dioxide capture and methane storage. Adv. Energy Mater. 7, 1601296 (2017). https://doi.org/10.1002/aenm.201601296
Denny, M.S., Moreton, J.C., Benz, L., et al.: Metal–organic frameworks for membrane-based separations. Nat. Rev. Mater. 1, 16078 (2016). https://doi.org/10.1038/natrevmats.2016.78
Kumar, P., Pournara, A., Kim, K.H., et al.: Metal–organic frameworks: challenges and opportunities for ion-exchange/sorption applications. Prog. Mater. Sci. 86, 25–74 (2017). https://doi.org/10.1016/j.pmatsci.2017.01.002
Song, Z.X., Cheng, N.C., Lushington, A., et al.: Recent progress on MOF-derived nanomaterials as advanced electrocatalysts in fuel cells. Catalysts 6, 116 (2016). https://doi.org/10.3390/catal6080116
Zhao, S.N., Song, X.Z., Song, S.Y., et al.: Highly efficient heterogeneous catalytic materials derived from metal–organic framework supports/precursors. Coord. Chem. Rev. 337, 80–96 (2017). https://doi.org/10.1016/j.ccr.2017.02.010
Liu, X.W., Sun, T.J., Hu, J.L., et al.: Composites of metal–organic frameworks and carbon-based materials: preparations, functionalities and applications. J. Mater. Chem. A 4, 3584–3616 (2016). https://doi.org/10.1039/c5ta09924b
Li, W.J., Tu, M., Cao, R., et al.: Metal–organic framework thin films: electrochemical fabrication techniques and corresponding applications & perspectives. J. Mater. Chem. A 4, 12356–12369 (2016). https://doi.org/10.1039/c6ta02118b
Li, B., Wen, H.M., Cui, Y.J., et al.: Emerging multifunctional metal–organic framework materials. Adv. Mater. 28, 8819–8860 (2016). https://doi.org/10.1002/adma.201601133
Masoomi, M.Y., Morsali, A.: Applications of metal–organic coordination polymers as precursors for preparation of nano-materials. Coord. Chem. Rev. 256, 2921–2943 (2012). https://doi.org/10.1016/j.ccr.2012.05.032
Zhang, X., Chen, A., Zhong, M., et al.: Metal–organic frameworks (MOFs) and MOF-derived materials for energy storage and conversion. Electrochem. Energ. Rev. 2, 29–104 (2019). https://doi.org/10.1007/s41918-018-0024-x
Wang, L., Han, Y.Z., Feng, X., et al.: Metal–organic frameworks for energy storage: batteries and supercapacitors. Coord. Chem. Rev. 307, 361–381 (2016). https://doi.org/10.1016/j.ccr.2015.09.002
Lux, L., Williams, K., Ma, S.Q.: Heat-treatment of metal–organic frameworks for green energy applications. CrystEngComm 17, 10–22 (2015). https://doi.org/10.1039/c4ce01499e
Xia, W., Mahmood, A., Zou, R.Q., et al.: Metal–organic frameworks and their derived nanostructures for electrochemical energy storage and conversion. Energy Environ. Sci. 8, 1837–1866 (2015). https://doi.org/10.1039/c5ee00762c
Wang, H.L., Zhu, Q.L., Zou, R.Q., et al.: Metal–organic frameworks for energy applications. Chem 2, 52–80 (2017). https://doi.org/10.1016/j.chempr.2016.12.002
Wu, H.B., Lou, X.W.: Metal–organic frameworks and their derived materials for electrochemical energy storage and conversion: promises and challenges. Sci. Adv. 3, eaap9252 (2017). https://doi.org/10.1126/sciadv.aap9252
Cheng, X.X., Jiang, Z.Y., Cheng, X.P., et al.: Bimetallic metal–organic frameworks nanocages as multi-functional fillers for water-selective membranes. J. Membr. Sci. 545, 19–28 (2018). https://doi.org/10.1016/j.memsci.2017.09.056
Dhakshinamoorthy, A., Asiri, A.M., Garcia, H.: Mixed-metal or mixed-linker metal organic frameworks as heterogeneous catalysts. Catal. Sci. Technol. 6, 5238–5261 (2016). https://doi.org/10.1039/c6cy00695g
Mai, H.D., Rafiq, K., Yoo, H.: Frontispiece: nano metal–organic framework-derived inorganic hybrid nanomaterials: synthetic strategies and applications. Chem. Eur. J. 23, 5631–5651 (2017). https://doi.org/10.1002/chem.201782461
Yap, M.H., Fow, K.L., Chen, G.Z.: Synthesis and applications of MOF-derived porous nanostructures. Green Energy Environ. 2, 218–245 (2017). https://doi.org/10.1016/j.gee.2017.05.003
Guan, B.Y., Yu, X.Y., Wu, H.B., et al.: Complex nanostructures from materials based on metal–organic frameworks for electrochemical energy storage and conversion. Adv. Mater. 29, 1703614 (2017). https://doi.org/10.1002/adma.201703614
Ma, D.L., Shi, X.M., Hu, A.M.: A facile method to in situ synthesize porous Ni2GeO4 nano-sheets on nickel foam as advanced anode electrodes for Li-ion batteries. Nanomaterials 6, 218 (2016). https://doi.org/10.3390/nano6110218
Pan, X., Ma, J.J., Yuan, R., et al.: Layered double hydroxides for preparing CoMn2O4 nanoparticles as anodes of lithium ion batteries. Mater. Chem. Phys. 194, 137–141 (2017). https://doi.org/10.1016/j.matchemphys.2017.03.038
Bhattacharjya, D., Sinhamahapatra, A., Ko, J.J., et al.: High capacity and exceptional cycling stability of ternary metal sulfide nanorods as Li ion battery anodes. Chem. Commun. 51, 13350–13353 (2015). https://doi.org/10.1039/c5cc04289e
Yuan, D.X., Wang, X.X., Yin, D.M., et al.: Microwave assisted hydrothermal synthesis of Ni1.5Co1.5S4 as high-performance electrode material for lithium storage. Appl. Surf. Sci. 414, 270–276 (2017). https://doi.org/10.1016/j.apsusc.2017.04.112
Wang, J.G., Jin, D.D., Zhou, R., et al.: One-step synthesis of NiCo2S4 ultrathin nanosheets on conductive substrates as advanced electrodes for high-efficient energy storage. J. Power Sources 306, 100–106 (2016). https://doi.org/10.1016/j.jpowsour.2015.12.014
Yu, X.Y., David Lou, X.W.: Mixed metal sulfides for electrochemical energy storage and conversion. Adv. Energy Mater. 8, 1701592 (2018). https://doi.org/10.1002/aenm.201701592
Wang, X.J., Cao, K.Z., Wang, Y.J., et al.: Controllable N-doped CuCo2O4@C film as a self-supported anode for ultrastable sodium-ion batteries. Small 13, 1700873 (2017). https://doi.org/10.1002/smll.201700873
Song, X.K., Chen, S., Guo, L.L., et al.: General dimension-controlled synthesis of hollow carbon embedded with metal singe atoms or core–shell nanoparticles for energy storage applications. Adv. Energy Mater. 8, 1801101 (2018). https://doi.org/10.1002/aenm.201801101
Xiong, P.X., Zeng, G.J., Zeng, L.X., et al.: Prussian blue analogues Mn[Fe(CN)6]0.6667·nH2O cubes as an anode material for lithium-ion batteries. Dalton Trans. 44, 16746–16751 (2015). https://doi.org/10.1039/c5dt03030g
You, Y., Wu, X.L., Yin, Y.X., et al.: High-quality Prussian blue crystals as superior cathode materials for room-temperature sodium-ion batteries. Energy Environ. Sci. 7, 1643–1647 (2014). https://doi.org/10.1039/c3ee44004d
Liu, Y., He, D.D., Han, R.M., et al.: Nanostructured potassium and sodium ion incorporated Prussian blue frameworks as cathode materials for sodium-ion batteries. Chem. Commun. 53, 5569–5572 (2017). https://doi.org/10.1039/c7cc02303k
Wang, L., Lu, Y.H., Liu, J., et al.: A superior low-cost cathode for a Na-ion battery. Angew. Chem. Int. Ed. 52, 1964–1967 (2013). https://doi.org/10.1002/anie.201206854
Long, J., Asakura, D., Okubo, M., et al.: Electrochemical Li-ion intercalation in octacyanotungstate-bridged coordination polymer with evidence of three magnetic regimes. Inorg. Chem. 55, 7637–7646 (2016). https://doi.org/10.1021/acs.inorgchem.6b01086
Li, C., Hu, X.S., Lou, X.B., et al.: Bimetallic coordination polymer as a promising anode material for lithium-ion batteries. Chem. Commun. 52, 2035–2038 (2016). https://doi.org/10.1039/c5cc07151h
Li, T., Li, C., Hu, X.S., et al.: Reversible lithium storage in manganese and cobalt 1,2,4,5-benzenetetracarboxylate metal–organic framework with high capacity. RSC Adv. 6, 61319–61324 (2016). https://doi.org/10.1039/c6ra07727g
Li, M.T., Kong, N., Lan, Y.Q., et al.: Sulfur-containing bimetallic metal organic frameworks with multi-fold helix as anode of lithium ion batteries. Dalton Trans. 47, 4827–4832 (2018). https://doi.org/10.1039/c8dt00095f
Jin, J., Zheng, Y., Huang, S.Z., et al.: Directly anchoring 2D NiCo metal–organic frameworks on few-layer black phosphorus for advanced lithium-ion batteries. J. Mater. Chem. A 7, 783–790 (2019). https://doi.org/10.1039/c8ta09327j
Wang, B.X., Wang, Z.Q., Cui, Y.J., et al.: Electrochemical properties of SnO2 nanoparticles immobilized within a metal–organic framework as an anode material for lithium-ion batteries. RSC Adv. 5, 84662–84665 (2015). https://doi.org/10.1039/c5ra16587c
Sun, X.M., Gao, G., Yan, D.W., et al.: Synthesis and electrochemical properties of Fe3O4@MOF core-shell microspheres as an anode for lithium ion battery application. Appl. Surf. Sci. 405, 52–59 (2017). https://doi.org/10.1016/j.apsusc.2017.01.247
Qiao, Q.Q., Li, G.R., Wang, Y.L., et al.: To enhance the capacity of Li-rich layered oxides by surface modification with metal–organic frameworks (MOFs) as cathodes for advanced lithium-ion batteries. J. Mater. Chem. A 4, 4440–4447 (2016). https://doi.org/10.1039/c6ta00882h
Yang, X., Xue, H.T., Yang, Q.D., et al.: Preparation of porous ZnO/ZnFe2O4 composite from metal organic frameworks and its applications for lithium ion batteries. Chem. Eng. J. 308, 340–346 (2017). https://doi.org/10.1016/j.cej.2016.09.071
Yang, X., Tang, Y.B., Huang, X., et al.: Lithium ion battery application of porous composite oxide microcubes prepared via metal-organic frameworks. J. Power Sources 284, 109–114 (2015). https://doi.org/10.1016/j.jpowsour.2015.02.155
Guo, Y., Qin, G.H., Liang, E.Q., et al.: MOFs-derived MgFe2O4 microboxes as anode material for lithium-ion batteries with superior performance. Ceram. Int. 43, 12519–12525 (2017). https://doi.org/10.1016/j.ceramint.2017.06.124
Guo, Y., Zhu, Y.Y., Yuan, C., et al.: MgFe2O4 hollow microboxes derived from metal–organic-frameworks as anode material for sodium-ion batteries. Mater. Lett. 199, 101–104 (2017). https://doi.org/10.1016/j.matlet.2017.04.069
Hou, L.R., Lian, L., Zhang, L.H., et al.: Self-sacrifice template fabrication of hierarchical mesoporous Bi-component-active ZnO/ZnFe2O4 sub-microcubes as superior anode towards high-performance lithium-ion battery. Adv. Funct. Mater. 25, 238–246 (2015). https://doi.org/10.1002/adfm.201402827
Cao, H., Zhu, S.Q., Yang, C., et al.: Metal–organic-framework-derived two-dimensional ultrathin mesoporous hetero-ZnFe2O4/ZnO nanosheets with enhanced lithium storage properties for Li-ion batteries. Nanotechnology 27, 465402 (2016). https://doi.org/10.1088/0957-4484/27/46/465402
Cai, D.P., Zhan, H.B., Wang, T.H.: MOF-derived porous ZnO/ZnFe2O4 hybrid nanostructures as advanced anode materials for lithium ion batteries. Mater. Lett. 197, 241–244 (2017). https://doi.org/10.1016/j.matlet.2017.02.012
Cai, D.P., Liu, B., Wang, D.D., et al.: Rational synthesis of metal–organic framework composites, hollow structures and their derived porous mixed metal oxide hollow structures. J. Mater. Chem. A 4, 183–192 (2016). https://doi.org/10.1039/c5ta07085f
Guo, H., Li, T.T., Chen, W.W., et al.: Self-assembly formation of hollow Ni–Fe–O nanocage architectures by metal–organic frameworks with high-performance lithium storage. Sci Rep. 5, 13310 (2015). https://doi.org/10.1038/srep13310
Zhang, W.Y., Zhu, X.S., Chen, X.G., et al.: Cyano-bridged coordination polymer hydrogel-derived Sn–Fe binary oxide nanohybrids with structural diversity: from 3D, 2D, to 2D/1D and enhanced lithium-storage performance. Nanoscale 8, 9828–9836 (2016). https://doi.org/10.1039/c6nr01139j
Huang, G., Zhang, L.L., Zhang, F.F., et al.: Metal–organic framework derived Fe2O3@NiCo2O4 porous nanocages as anode materials for Li-ion batteries. Nanoscale 6, 5509–5515 (2014). https://doi.org/10.1039/c3nr06041a
Zhang, W.Y., Yu, Z.H., Zhang, A.P., et al.: Cyanogel-derived nanoporous Sn–Fe–Ni ternary oxide network for high-capacity and long-life lithium storage. J. Alloys Compd. 691, 250–254 (2017). https://doi.org/10.1016/j.jallcom.2016.08.273
Chen, J.F., Ru, Q., Mo, Y.D., et al.: Design and synthesis of hollow NiCo2O4 nanoboxes as anodes for lithium-ion and sodium-ion batteries. Phys. Chem. Chem. Phys. 18, 18949–18957 (2016). https://doi.org/10.1039/c6cp02871c
Chu, X.F., Wang, C., Zhou, L., et al.: Designed formation of Co3O4@NiCo2O4 sheets-in-cage nanostructure as high-performance anode material for lithium-ion batteries. RSC Adv. 8, 39879–39883 (2018). https://doi.org/10.1039/c8ra07396a
Xu, W.W., Cui, X.D., Xie, Z.Q., et al.: Integrated Co3O4/TiO2 composite hollow polyhedrons prepared via cation-exchange metal–organic framework for superior lithium-ion batteries. Electrochim. Acta 222, 1021–1028 (2016). https://doi.org/10.1016/j.electacta.2016.11.071
Sambandam, B., Soundharrajan, V., Song, J.J., et al.: Investigation of Li-ion storage properties of earth abundant β-Mn2V2O7 prepared using facile green strategy. J. Power Sources 350, 80–86 (2017). https://doi.org/10.1016/j.jpowsour.2017.03.054
Soundharrajan, V., Sambandam, B., Song, J.J., et al.: Facile green synthesis of a Co3V2O8 nanoparticle electrode for high energy lithium-ion battery applications. J. Colloid Interface Sci. 501, 133–141 (2017). https://doi.org/10.1016/j.jcis.2017.04.048
Sambandam, B., Soundharrajan, V., Song, J.J., et al.: Ni3V2O8 nanoparticles as an excellent anode material for high-energy lithium-ion batteries. J. Electroanal. Chem. 810, 34–40 (2018). https://doi.org/10.1016/j.jelechem.2017.12.083
Sambandam, B., Soundharrajan, V., Song, J.J., et al.: Zn3V2O8 porous morphology derived through a facile and green approach as an excellent anode for high-energy lithium ion batteries. Chem. Eng. J. 328, 454–463 (2017). https://doi.org/10.1016/j.cej.2017.07.050
Huang, J., Fang, G.Z., Liu, K., et al.: Controllable synthesis of highly uniform cuboid-shape MOFs and their derivatives for lithium-ion battery and photocatalysis applications. Chem. Eng. J. 322, 281–292 (2017). https://doi.org/10.1016/j.cej.2017.03.136
Fang, G.Z., Zhou, J., Cai, Y.S., et al.: Metal–organic framework-templated two-dimensional hybrid bimetallic metal oxides with enhanced lithium/sodium storage capability. J. Mater. Chem. A 5, 13983–13993 (2017). https://doi.org/10.1039/c7ta01961k
Cheong, J.Y., Koo, W.T., Kim, C., et al.: Feasible defect engineering by employing metal organic framework templates into one-dimensional metal oxides for battery applications. ACS Appl. Mater. Interfaces 10, 20540–20549 (2018). https://doi.org/10.1021/acsami.8b04968
Wang, J.P., Zhou, H., Zhu, M.Z., et al.: Metal–organic framework-derived Co3O4 covered by MoS2 nanosheets for high-performance lithium-ion batteries. J. Alloys Compd. 744, 220–227 (2018). https://doi.org/10.1016/j.jallcom.2018.02.086
Xu, X.H., Cao, K.Z., Wang, Y.J., et al.: 3D hierarchical porous ZnO/ZnCo2O4 nanosheets as high-rate anode material for lithium-ion batteries. J. Mater. Chem. A 4, 6042–6047 (2016). https://doi.org/10.1039/c6ta00723f
Xia, Y., Wang, B.B., Wang, G., et al.: MOF-derived porous NixFe3−xO4 nanotubes with excellent performance in lithium-ion batteries. ChemElectroChem 3, 299–308 (2016). https://doi.org/10.1002/celc.201500419
Sambandam, B., Soundharrajan, V., Mathew, V., et al.: Metal–organic framework-combustion: a new, cost-effective and one-pot technique to produce a porous Co3V2O8 microsphere anode for high energy lithium ion batteries. J. Mater. Chem. A 4, 14605–14613 (2016). https://doi.org/10.1039/c6ta05919h
Soundharrajan, V., Sambandam, B., Song, J.J., et al.: Co3V2O8 sponge network morphology derived from metal–organic framework as an excellent lithium storage anode material. ACS Appl. Mater. Interfaces 8, 8546–8553 (2016). https://doi.org/10.1021/acsami.6b01047
Soundharrajan, V., Sambandam, B., Song, J.J., et al.: Bitter gourd-shaped Ni3V2O8 anode developed by a one-pot metal-organic framework-combustion technique for advanced Li-ion batteries. Ceram. Int. 43, 13224–13232 (2017). https://doi.org/10.1016/j.ceramint.2017.07.018
Hong, Z.S., Kang, M.L., Chen, X.H., et al.: Synthesis of mesoporous Co2+-doped TiO2 nanodisks derived from metal organic frameworks with improved sodium storage performance. ACS Appl. Mater. Interfaces 9, 32071–32079 (2017). https://doi.org/10.1021/acsami.7b06290
Wu, L.L., Wang, Z., Long, Y., et al.: Multishelled NixCo3−xO4 hollow microspheres derived from bimetal–organic frameworks as anode materials for high-performance lithium-ion batteries. Small 13, 1604270 (2017). https://doi.org/10.1002/smll.201604270
Wang, L.J., Wang, X.J., Meng, Z.H., et al.: MOF-templated thermolysis for porous CuO/Cu2O@CeO2 anode material of lithium-ion batteries with high rate performance. J. Mater. Sci. 52, 7140–7148 (2017). https://doi.org/10.1007/s10853-017-0949-1
Wang, B., Wang, X.Y., Yu, X.Z.: Metal–organic frameworks derived (Cu0.30Co0.7)Co2O4/CuO composite rectangular pyramid grass as high performance anode materials for lithium ion battery. Electrochim. Acta 250, 35–41 (2017). https://doi.org/10.1016/j.electacta.2017.08.029
Hu, X.S., Li, C., Lou, X.B., et al.: Controlled synthesis of CoxMn3−xO4 nanoparticles with a tunable composition and size for high performance lithium-ion batteries. RSC Adv. 6, 54270–54276 (2016). https://doi.org/10.1039/c6ra08700k
Wang, D.P., Fu, M.S., Ha, Y., et al.: Metal–organic framework-derived mesoporous octahedral copper oxide/titania composites for high-performance lithium-ion batteries. J. Colloids Interface Sci. 529, 265–272 (2018). https://doi.org/10.1016/j.jcis.2018.06.010
Li, H., Liang, M., Sun, W.W., et al.: Lithium-ion batteries: bimetal–organic framework: one-step homogenous formation and its derived mesoporous ternary metal oxide nanorod for high-capacity, high-rate, and long-cycle-life lithium storage (adv. funct. mater. 7/2016). Adv. Funct. Mater. 26, 982 (2016). https://doi.org/10.1002/adfm.201670041
Zhong, M., Yang, D.H., Kong, L.J., et al.: Bimetallic metal–organic framework derived Co3O4–CoFe2O4 composites with different Fe/Co molar ratios as anode materials for lithium ion batteries. Dalton Trans. 46, 15947–15953 (2017). https://doi.org/10.1039/c7dt03047a
Du, M.J., He, D., Lou, Y.B., et al.: Porous nanostructured ZnCo2O4 derived from MOF-74: high-performance anode materials for lithium ion batteries. J. Energy Chem. 26, 673–680 (2017). https://doi.org/10.1016/j.jechem.2017.02.001
Zhang, C.Y., Dai, J., Zhang, P.G., et al.: Porous Fe2O3/ZnO composite derived from MOFs as an anode material for lithium ion batteries. Ceram. Int. 42, 1044–1049 (2016). https://doi.org/10.1016/j.ceramint.2015.09.028
Huang, G.Y., Guo, X.Y., Cao, X., et al.: 3D network single-phase Ni0.9Zn0.1O as anode materials for lithium-ion batteries. Nano Energy 28, 338–345 (2016). https://doi.org/10.1016/j.nanoen.2016.08.050
Lu, Y., Yu, L., Wu, M.H., et al.: Construction of complex Co3O4@Co3V2O8 hollow structures from metal–organic frameworks with enhanced lithium storage properties. Adv. Mater. 30, 1702875 (2018). https://doi.org/10.1002/adma.201702875
Li, J.B., Yan, D., Hou, S.J., et al.: Metal–organic frameworks derived yolk-shell ZnO/NiO microspheres as high-performance anode materials for lithium-ion batteries. Chem. Eng. J. 335, 579–589 (2018). https://doi.org/10.1016/j.cej.2017.10.183
Guo, W.X., Sun, W.W., Wang, Y.: Multilayer CuO@NiO hollow spheres: microwave-assisted metal–organic-framework derivation and highly reversible structure-matched stepwise lithium storage. ACS Nano 9, 11462–11471 (2015). https://doi.org/10.1021/acsnano.5b05610
Geng, H.B., Ang, H.X., Ding, X.G., et al.: Metal coordination polymer derived mesoporous Co3O4 nanorods with uniform TiO2 coating as advanced anodes for lithium ion batteries. Nanoscale 8, 2967–2973 (2016). https://doi.org/10.1039/c5nr08570e
Ye, L.W., Yuan, Y.F., Zhang, D., et al.: Heterogeneous triple-shelled TiO2@NiCo2O4@Co3O4 nanocages as improved performance anodes for lithium-ion batteries. Mater. Lett. 232, 228–231 (2018). https://doi.org/10.1016/j.matlet.2018.08.131
Huang, G., Yin, D.M., Wang, L.M.: A general strategy for coating metal-organic frameworks on diverse components and architectures. J. Mater. Chem. A 4, 15106–15116 (2016). https://doi.org/10.1039/c6ta05389k
Song, Y.H., Chen, Y.Q., Fu, Y.Y., et al.: Hollow multicomponent zeolitic imidazolate frameworks-derived 3NiO·2Ni3/2Co1/2ZnO4 for high rate lithium-ion batteries. J. Alloys Compd. 703, 148–155 (2017). https://doi.org/10.1016/j.jallcom.2017.01.339
Huang, G., Li, Q., Yin, D.M., et al.: Hierarchical porous Te@ZnCo2O4 nanofibers derived from Te@metal–organic frameworks for superior lithium storage capability. Adv. Funct. Mater. 27, 1604941 (2017). https://doi.org/10.1002/adfm.201604941
Gong, F., Xia, D., Zhou, Q., et al.: Novel spherical cobalt/nickel mixed-vanadates as high-capacity anodes in lithium ion batteries. J. Alloys Compd. 766, 442–449 (2018). https://doi.org/10.1016/j.jallcom.2018.06.233
Zhao, Z.W., Wen, T., Liang, K., et al.: Carbon-coated Fe3O4/VOx hollow microboxes derived from metal–organic frameworks as a high-performance anode material for lithium-ion batteries. ACS Appl. Mater. Interfaces 9, 3757–3765 (2017). https://doi.org/10.1021/acsami.6b15110
Xiao, Y., Cao, M.H.: Dual hybrid strategy towards achieving high capacity and long-life lithium storage of ZnO. J. Power Sources 305, 1–9 (2016). https://doi.org/10.1016/j.jpowsour.2015.11.071
Chen, S.H.: Lithium-ion batteries anodic performance of porous Sn/C–ZnO core–shell structures derivedfrom ZIF-8. Int. J. Electrochem. Sci. 11, 10522–10535 (2016). https://doi.org/10.20964/2016.12.62
Liu, T.Q., Wang, W.Q., Yi, M.J., et al.: Metal–organic framework derived porous ternary ZnCo2O4 nanoplate arrays grown on carbon cloth as binder-free electrodes for lithium-ion batteries. Chem. Eng. J. 354, 454–462 (2018). https://doi.org/10.1016/j.cej.2018.08.037
Gan, Q.M., Zhao, K.M., Liu, S.Q., et al.: MOF-derived carbon coating on self-supported ZnCo2O4–ZnO nanorod arrays as high-performance anode for lithium-ion batteries. J. Mater. Sci. 52, 7768–7780 (2017). https://doi.org/10.1007/s10853-017-1043-4
Zhong, M., Yang, D.H., Xie, C.C., et al.: Yolk–shell MnO@ZnMn2O4/N–C nanorods derived from α-MnO2/ZIF-8 as anode materials for lithium ion batteries. Small 12, 5564–5571 (2016). https://doi.org/10.1002/smll.201601959
Ma, Y., Ma, Y.J., Geiger, D., et al.: ZnO/ZnFe2O4/N-doped C micro-polyhedrons with hierarchical hollow structure as high-performance anodes for lithium-ion batteries. Nano Energy 42, 341–352 (2017). https://doi.org/10.1016/j.nanoen.2017.11.030
Niu, J.L., Zeng, C.H., Peng, H.J., et al.: Formation of N-doped carbon-coated ZnO/ZnCo2O4/CuCo2O4 derived from a polymetallic metal-organic framework: toward high-rate and long-cycle-life lithium storage. Small 13, 1702150 (2017). https://doi.org/10.1002/smll.201702150
Zou, F., Hu, X.L., Li, Z., et al.: MOF-derived porous ZnO/ZnFe2O4/C octahedra with hollow interiors for high-rate lithium-ion batteries. Adv. Mater. 26, 6622–6628 (2014). https://doi.org/10.1002/adma.201402322
Chen, Y.Q., Wu, J.F., Yang, W.S., et al.: Zn/Fe-MOFs-derived hierarchical ball-in-ball ZnO/ZnFe2O4@carbon nanospheres with exceptional lithium storage performance. J. Alloys Compd. 688, 211–218 (2016). https://doi.org/10.1016/j.jallcom.2016.07.011
Gao, X.J., Wang, J.W., Zhang, D., et al.: Hollow NiFe2O4 nanospheres on carbon nanorods as a highly efficient anode material for lithium ion batteries. J. Mater. Chem. A 5, 5007–5012 (2017). https://doi.org/10.1039/c6ta11058d
Shi, X., Liu, S.T., Tang, B., et al.: SnO2/TiO2 nanocomposites embedded in porous carbon as a superior anode material for lithium-ion batteries. Chem. Eng. J. 330, 453–461 (2017). https://doi.org/10.1016/j.cej.2017.07.164
Yue, H.Y., Shi, Z.P., Wang, L., et al.: Rapid calcination synthesis of Zn2SnO4@C/Sn composites for high-performance lithium ion battery anodes. J. Alloys Compd. 723, 1018–1025 (2017). https://doi.org/10.1016/j.jallcom.2017.06.318
Wang, Y.Z., Kong, M.G., Liu, Z.W., et al.: Morella-rubra-like metal–organic-framework-derived multilayered Co3O4/NiO/C hybrids as high-performance anodes for lithium storage. J. Mater. Chem. A 5, 24269–24274 (2017). https://doi.org/10.1039/c7ta08264a
Jiang, Z.J., Cheng, S., Rong, H.B., et al.: General synthesis of MFe2O4/carbon (M = Zn, Mn Co, Ni) spindles from mixed metal organic frameworks as high performance anodes for lithium ion batteries. J. Mater. Chem. A 5, 23641–23650 (2017). https://doi.org/10.1039/c7ta07097g
Wu, X., Zeng, M., Wang, L.G., et al.: CTAB-assisted synthesis of ZnCo2O4 nanoparticles embedded in N-doped carbon as superior anode materials for lithium-ion battery. J. Alloys Compd. 780, 897–906 (2019). https://doi.org/10.1016/j.jallcom.2018.12.029
Niu, S.S., Wang, Z.Y., Zhou, T., et al.: A polymetallic metal–organic framework-derived strategy toward synergistically multidoped metal oxide electrodes with ultralong cycle life and high volumetric capacity. Adv. Funct. Mater. 27, 1605332 (2017). https://doi.org/10.1002/adfm.201605332
Yu, L.T., Liu, J., Xu, X.J., et al.: Ilmenite nanotubes for high stability and high rate sodium-ion battery anodes. ACS Nano 11, 5120–5129 (2017). https://doi.org/10.1021/acsnano.7b02136
Park, S.K., Yang, S.H., Kang, Y.C.: Rational design of metal–organic framework-templated hollow NiCo2O4 polyhedrons decorated on macroporous CNT microspheres for improved lithium-ion storage properties. Chem. Eng. J. 349, 214–222 (2018). https://doi.org/10.1016/j.cej.2018.05.091
Joshi, B., Samuel, E., Il Kim, Y., et al.: Hierarchically designed ZIF-8-derived Ni@ZnO/carbon nanofiber freestanding composite for stable Li storage. Chem. Eng. J. 351, 127–134 (2018). https://doi.org/10.1016/j.cej.2018.05.098
Jia, Z.Q., Tan, Y.B., Cui, Z.H., et al.: Construction of NiCo2O4@graphene nanorods by tuning the compositional chemistry of metal–organic frameworks with enhanced lithium storage properties. J. Mater. Chem. A 6, 19604–19610 (2018). https://doi.org/10.1039/c8ta07967f
Zhu, Q., Li, Y.H., Gao, Y., et al.: Reduced graphene-wrapped MnO2 nanowires self-inserted with Co3O4 nanocages: remarkable enhanced performances for lithium-ion anode applications. Chem. Eur. J. 22, 6876–6880 (2016). https://doi.org/10.1002/chem.201600456
Zhang, K.X., Yang, H.X., Lü, M.F., et al.: Porous MoO2–Cu/C/Graphene nano-octahedrons quadruple nanocomposites as an advanced anode for lithium ion batteries with enhanced rate capability. J. Alloys Compd. 731, 646–654 (2018). https://doi.org/10.1016/j.jallcom.2017.10.091
Dai, J.Y., Li, J.J., Zhang, Q.B., et al.: Co3S4@C@MoS2 microstructures fabricated from MOF template as advanced lithium-ion battery anode. Mater. Lett. 236, 483–486 (2019). https://doi.org/10.1016/j.matlet.2018.10.166
Dong, S.H., Li, C.X., Ge, X.L., et al.: ZnS–Sb2S3@C core-double shell polyhedron structure derived from metal–organic framework as anodes for high performance sodium ion batteries. ACS Nano 11, 6474–6482 (2017). https://doi.org/10.1021/acsnano.7b03321
Xu, X.J., Liu, Z.B., Ji, S.M., et al.: Rational synthesis of ternary FeS@TiO2@C nanotubes as anode for superior Na-ion batteries. Chem. Eng. J. 359, 765–774 (2019). https://doi.org/10.1016/j.cej.2018.11.191
Yuan, D.X., Huang, G., Yin, D.M., et al.: Metal–organic framework template synthesis of NiCo2S4@C encapsulated in hollow nitrogen-doped carbon cubes with enhanced electrochemical performance for lithium storage. ACS Appl. Mater. Interfaces. 9, 18178–18186 (2017). https://doi.org/10.1021/acsami.7b02176
Aslam, M.K., Shah, S.S.A., Li, S., et al.: Kinetically controlled synthesis of MOF nanostructures: single-holed hollow core–shell ZnCoS@Co9S8/NC for ultra-high performance lithium-ion batteries. J. Mater. Chem. A 6, 14083–14090 (2018). https://doi.org/10.1039/c8ta04676j
Liu, X.Y., Zou, F., Liu, K.W., et al.: A binary metal organic framework derived hierarchical hollow Ni3S2/Co9S8/N-doped carbon composite with superior sodium storage performance. J. Mater. Chem. A 5, 11781–11787 (2017). https://doi.org/10.1039/c7ta00201g
Li, H., Su, Y., Sun, W.W., et al.: Carbon nanotubes rooted in porous ternary metal sulfide@N/S-doped carbon dodecahedron: bimetal–organic-frameworks derivation and electrochemical application for high-capacity and long-life lithium-ion batteries. Adv. Funct. Mater. 26, 8345–8353 (2016). https://doi.org/10.1002/adfm.201601631
Wang, H., Chen, Z.L., Liu, Y., et al.: Hierarchically porous-structured ZnxCo1–xS@C–CNT nanocomposites with high-rate cycling performance for lithium-ion batteries. J. Mater. Chem. A 5, 23221–23227 (2017). https://doi.org/10.1039/c7ta07993a
Park, S.K., Kim, J.K., Kang, Y.C.: Metal–organic framework-derived CoSe2/(NiCo)Se2 box-in-box hollow nanocubes with enhanced electrochemical properties for sodium-ion storage and hydrogen evolution. J. Mater. Chem. A 5, 18823–18830 (2017). https://doi.org/10.1039/c7ta05571d
Xu, H.B., Wu, R.B.: Porous hollow composites assembled by NixCo1−xSe2 nanosheets rooted on carbon polyhedra for superior lithium storage capability. J. Colloid Interface Sci. 536, 673–680 (2019). https://doi.org/10.1016/j.jcis.2018.10.110
Sun, W.W., Cai, C., Tang, X.X., et al.: Carbon coated mixed-metal selenide microrod: bimetal–organic-framework derivation approach and applications for lithium-ion batteries. Chem. Eng. J. 351, 169–176 (2018). https://doi.org/10.1016/j.cej.2018.06.093
Jin, J., Zheng, Y., Kong, L.B., et al.: Tuning ZnSe/CoSe in MOF-derived N-doped porous carbon/CNTs for high-performance lithium storage. J. Mater. Chem. A 6, 15710–15717 (2018). https://doi.org/10.1039/c8ta04425b
Wang, Y.Y., Fan, H.S., Hou, B.H., et al.: Ni1.5CoSe5 Nanocubes embedded in 3D dual N-doped carbon network as advanced anode material in sodium-ion full cells with superior low-temperature and high-power properties. J. Mater. Chem. A 6, 22966–22975 (2018). https://doi.org/10.1039/c8ta09264h
Wang, X.X., Na, Z.L., Yin, D.M., et al.: Nanosized FexNi2−xP embedded phosphorus-doped carbon nanorods with superior lithium storage performance. Energy Storage Mater. 12, 103–109 (2018). https://doi.org/10.1016/j.ensm.2017.12.004
Li, Z.Q., Zhang, L.Y., Ge, X.L., et al.: Core-shell structured CoP/FeP porous microcubes interconnected by reduced graphene oxide as high performance anodes for sodium ion batteries. Nano Energy 32, 494–502 (2017). https://doi.org/10.1016/j.nanoen.2017.01.009
Chen, T., Cheng, B.R., Chen, R.P., et al.: Hierarchical ternary carbide nanoparticle/carbon nanotube-inserted N-doped carbon concave-polyhedrons for efficient lithium and sodium storage. ACS Appl. Mater. Interfaces 8, 26834–26841 (2016). https://doi.org/10.1021/acsami.6b08911
Ke, F., Li, Y.Z., Zhang, C.Y., et al.: MOG-derived porous FeCo/C nanocomposites as a potential platform for enhanced catalytic activity and lithium-ion batteries performance. J. Colloid Interface Sci. 522, 283–290 (2018). https://doi.org/10.1016/j.jcis.2018.03.081
Dai, R.L., Sun, W.W., Lv, L.P., et al.: Bimetal–organic-framework derivation of ball-cactus-like Ni–Sn–P@C–CNT as long-cycle anode for lithium ion battery. Small 13, 1700521 (2017). https://doi.org/10.1002/smll.201700521
Shi, X., Song, H.H., Li, A., et al.: Sn-Co nanoalloys embedded in porous N-doped carbon microboxes as a stable anode material for lithium-ion batteries. J. Mater. Chem. A 5, 5873–5879 (2017). https://doi.org/10.1039/c7ta00099e
Yu, L.T., Liu, J., Xu, X.J., et al.: Metal–organic framework-derived NiSb alloy embedded in carbon hollow spheres as superior lithium-ion battery anodes. ACS Appl. Mater. Interfaces 9, 2516–2525 (2017). https://doi.org/10.1021/acsami.6b14233
Chen, X.G., Zhang, W.Y., Liu, T.H., et al.: Hydrogel-derived nanoporous Sn-in-Ni ternary alloy network for high-performance lithium-storage. Electrochim. Acta 210, 530–538 (2016). https://doi.org/10.1016/j.electacta.2016.05.184
Huang, M., Mi, K., Zhang, J.H., et al.: MOF-derived bi-metal embedded N-doped carbon polyhedral nanocages with enhanced lithium storage. J. Mater. Chem. A 5, 266–274 (2017). https://doi.org/10.1039/c6ta09030c
Yang, S.F., Ren, W.F., Chen, J.: Facile synthesis of spinel LiNi0.5Mn1.5O4 cathode materials using M2(OH)2(C8H4O4)-class metal–organic frameworks. Ionics 23, 2969–2980 (2017). https://doi.org/10.1007/s11581-017-2102-1
Tang, B., Li, A., Tong, Y., et al.: Carbon-coated Li4Ti5O12 tablets derived from metal–organic frameworks as anode material for lithium-ion batteries. J. Alloys Compd. 708, 6–13 (2017). https://doi.org/10.1016/j.jallcom.2017.02.279
Wang, X.J., Wang, L.J., Chen, B.K., et al.: MOFs as reactant: in situ synthesis of Li2ZnTi3O8@C–N nanocomposites as high performance anodes for lithium-ion batteries. J. Electroanal. Chem. 775, 311–319 (2016). https://doi.org/10.1016/j.jelechem.2016.06.024
Zhao, Y., Song, Z.X., Li, X., et al.: Metal organic frameworks for energy storage and conversion. Energy Storage Mater. 2, 35–62 (2016). https://doi.org/10.1016/j.ensm.2015.11.005
Guo, W.H., Xia, W., Cai, K.T., et al.: Kinetic-controlled formation of bimetallic metal–organic framework hybrid structures. Small 13, 1702049 (2017). https://doi.org/10.1002/smll.201770218
Ke, F.S., Wu, Y.S., Deng, H.X.: Metal–organic frameworks for lithium ion batteries and supercapacitors. J. Solid State Chem. 223, 109–121 (2015). https://doi.org/10.1016/j.jssc.2014.07.008
Chen, Y.M., Li, Z., Lou, X.W.D.: General formation of MxCo3–xS4 (M = Ni, Mn, Zn) hollow tubular structures for hybrid supercapacitors. Angew. Chem. Int. Ed. 54, 10521–10524 (2015). https://doi.org/10.1002/anie.201504349
Liu, X.M., Ai, L.H., Jiang, J.: Interconnected porous hollow CuS microspheres derived from metal-organic frameworks for efficient adsorption and electrochemical biosensing. Powder Technol. 283, 539–548 (2015). https://doi.org/10.1016/j.powtec.2015.06.016
Idota, Y.: Tin-based amorphous oxide: a high-capacity lithium-ion-storage material. Science 276, 1395–1397 (1997). https://doi.org/10.1126/science.276.5317.1395
He, Y., Yu, X.Q., Wang, Y.H., et al.: Alumina-coated patterned amorphous silicon as the anode for a lithium-ion battery with high coulombic efficiency. Adv. Mater. 23, 4938–4941 (2011). https://doi.org/10.1002/adma.201102568
Bennett, T.D., Tan, J.C., Yue, Y.Z., et al.: Hybrid glasses from strong and fragile metal–organic framework liquids. Nat. Commun 6, 8079 (2015). https://doi.org/10.1038/ncomms9079
Hu, Y.C., Wang, Y.Z., Su, R., et al.: A highly efficient and self-stabilizing metallic-glass catalyst for electrochemical hydrogen generation. Adv. Mater. 28, 10293–10297 (2016). https://doi.org/10.1002/adma.201603880
Sekol, R.C., Kumar, G., Carmo, M., et al.: Bulk metallic glass micro fuel cell. Small 9, 2081–2085 (2013). https://doi.org/10.1002/smll.201201647
Bai, L.Y., Gao, Q., Zhao, Y.L.: Two fully conjugated covalent organic frameworks as anode materials for lithium ion batteries. J. Mater. Chem. A 4, 14106–14110 (2016). https://doi.org/10.1039/c6ta06449c
Wang, S., Wang, Q.Y., Shao, P.P., et al.: Exfoliation of covalent organic frameworks into few-layer redox-active nanosheets as cathode materials for lithium-ion batteries. J. Am. Chem. Soc. 139, 4258–4261 (2017). https://doi.org/10.1021/jacs.7b02648
Xu, F., Jin, S.B., Zhong, H., et al.: Electrochemically active, crystalline, mesoporous covalent organic frameworks on carbon nanotubes for synergistic lithium-ion battery energy storage. Sci. Rep. 5, 8225 (2015). https://doi.org/10.1038/srep08225
Yang, X.F., Dong, B., Zhang, H.Z., et al.: Sulfur impregnated in a mesoporous covalent organic framework for high performance lithium–sulfur batteries. RSC Adv. 5, 86137–86143 (2015). https://doi.org/10.1039/c5ra16235a
Mulzer, C.R., Shen, L.X., Bisbey, R.P., et al.: Superior charge storage and power density of a conducting polymer-modified covalent organic framework. ACS Cent. Sci. 2, 667–673 (2016). https://doi.org/10.1021/acscentsci.6b00220
Lei, Z.D., Chen, X.D., Sun, W.W., et al.: Exfoliated triazine-based covalent organic nanosheets with multielectron redox for high-performance lithium organic batteries. Adv. Energy Mater. 9, 1801010 (2019). https://doi.org/10.1002/aenm.201801010
Yoo, J., Cho, S.J., Jung, G.Y., et al.: COF-net on CNT-net as a molecularly designed, hierarchical porous chemical trap for polysulfides in lithium–sulfur batteries. Nano Lett. 16, 3292–3300 (2016). https://doi.org/10.1021/acs.nanolett.6b00870
Liao, H.P., Ding, H.M., Li, B.J., et al.: Covalent–organic frameworks: potential host materials for sulfur impregnation in lithium–sulfur batteries. J. Mater. Chem. A 2, 8854–8858 (2014). https://doi.org/10.1039/c4ta00523f
Guo, B.K., Ben, T., Bi, Z.H., et al.: Highly dispersed sulfur in a porous aromatic framework as a cathode for lithium–sulfur batteries. Chem. Commun. 49, 4905 (2013). https://doi.org/10.1039/c3cc41518j
Liao, H.P., Wang, H.M., Ding, H.M., et al.: A 2D porous porphyrin-based covalent organic framework for sulfur storage in lithium–sulfur batteries. J. Mater. Chem. A 4, 7416–7421 (2016). https://doi.org/10.1039/c6ta00483k
Yang, D.H., Yao, Z.Q., Wu, D.H., et al.: Structure-modulated crystalline covalent organic frameworks as high-rate cathodes for Li-ion batteries. J. Mater. Chem. A 4, 18621–18627 (2016). https://doi.org/10.1039/c6ta07606h
Yang, H., Zhang, S.L., Han, L.H., et al.: High conductive two-dimensional covalent organic framework for lithium storage with large capacity. ACS Appl. Mater. Interfaces. 8, 5366–5375 (2016). https://doi.org/10.1021/acsami.5b12370
Zhang, Q.T., Dai, Q.Q., Li, M., et al.: Incorporation of MnO nanoparticles inside porous carbon nanotubes originated from conjugated microporous polymers for lithium storage. J. Mater. Chem. A 4, 19132–19139 (2016). https://doi.org/10.1039/c6ta08464h
Yang, X.Q., Wei, C., Sun, C.C., et al.: High performance anode of lithium-ion batteries derived from an advanced carbonaceous porous network. J. Alloys Compd. 693, 777–781 (2017). https://doi.org/10.1016/j.jallcom.2016.09.192
Lei, Z.D., Yang, Q.S., Xu, Y., et al.: Boosting lithium storage in covalent organic framework via activation of 14-electron redox chemistry. Nat. Commun. 9, 576 (2018). https://doi.org/10.1038/s41467-018-02889-7
Acknowledgements
Funding was provided by Shanghai Municipal Education Commission (CN) Grant No. (2019-01-07-00-09-E00021) and Science and Technology Commission of Shanghai Municipality Grant No. (17010500300).
Author information
Authors and Affiliations
Corresponding author
Additional information
Weiwei Sun and Xuxu Tang contributed equally to this work.
Appendix
Appendix
See Table 5.
Rights and permissions
About this article
Cite this article
Sun, W., Tang, X. & Wang, Y. Multi-metal–Organic Frameworks and Their Derived Materials for Li/Na-Ion Batteries. Electrochem. Energ. Rev. 3, 127–154 (2020). https://doi.org/10.1007/s41918-019-00056-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s41918-019-00056-0