Geochemistry of Precambrian black shales from Ossa-Morena Zone (Portugal): depositional environment and possible source of metals

The paleodepositional environments related to Ediacaran black shales from the Série Negra succession in Ossa-Morena tectonostratigraphic zone were investigated using their geochemical composition to identify the sedimentary sources and depositional conditions. Their potential for assisting the genesis of metal deposits was also discussed. The sedimentary sources of the black shales are related to the break up of a Cadomian magmatic-arc developed in the North Gondwana realm, where the Ossa-Morena Zone was located during late Ediacaran times, showing acidic to mixed signatures. Some ratios were calculated based on redox sensitive elements, indicating both anoxic and oxic paleoenvironmental conditions. The anoxic conditions were predominant and they were identified on samples with higher organic carbon content, emphasizing that the redox conditions favored organic matter preservation and the accumulation of selected metals. Considering the mode of occurrence, the elements Ag, Cd, Cu, Pb and Se are assumed to be preferentially associated with sulfides, whereas Mo and U are preferentially organically bound. The results reveal that the black shales from the Série Negra succession in Ossa-Morena Zone might represent a source of metals, which were probably remobilized during Variscan events.


Introduction
Black shales are defined as fine-grained rocks with disperse organic matter (OM), where the total organic carbon (TOC) is above 0.5 wt% (Huyck, 1989;Trabucho-Alexandre, 2014); they are the result of the accumulation and preservation of the OM in the sediments mostly from reducing environments (Tourtelot, 1979;Wignall, 1994). Black shales are generally formed in marine anoxic bottom waters, although they can occur in a wide range of depositional environments (e.g. Ai et al., 2020;Gao et al., 2016;Potter et al., 1980;Schieber, 1978).
The use of geochemical proxies allows the characterization of paleodepositional environments at the time of sedimentation and diagenesis (e.g. Gao et al., 2016). The redox variations are mainly controlled by the availability of O 2 and H 2 S, represented essentially by the presence of OM, sulfides and biological activity (e.g. El-Anwar et al., 2018;Ferreira et al., 2020;Jones & Manning, 1994) and can be evaluated based on the relationships between some trace elements, namely As, Cr, Co, Cu, Mo, Ni, U, V (Leventhal, 1993).
Black shales are significant in economic geology since they can be the source rock for hydrocarbons production and are often spatially associated with several types of ore deposits, mostly due to the enrichment of metals within black shales successions (e.g. Cortial et al., 1990;Gao et al., 2016;Kontinen & Hanski, 2015;Potter et al., 1980;Sáez et al., 2011;Sozinov, 1982;Suárez-Ruiz et al., 2012). Black shales, due to the active participation of the OM, provide the necessary redox conditions for an enrichment of metals in the sediments. Therefore, these rock units are a valuable source of metals for later mineralizing processes (Sozinov, 1982;Suárez-Ruiz et al., 2012 and references therein).
The occurrence of black shales is common and widespread in the geological record (Kunzmann et al., 2015;Sozinov, 1982;Tourtelot, 1979;Wang et al., 2019;Wignall, 1994). Several studies on Precambrian black shales have demonstrated their relevance on the recognition of paleogeographic conditions, depositional environments, processes affecting metamorphic complexes, as well as in ore deposits genesis (e.g. Kunzmann et al., 2015;Sozinov, 1982). The main sources of OM in Ediacaran rocks have been interpreted as result from the accumulation of prokaryotic (i.e. bacterial) and eukaryotic (i.e. algal) organisms (Ai et al., 2020).
Precambrian successions with black shales, specifically from the Ediacaran, occur in the southernmost tectonostratigraphic zone of Iberian Terrane, the Ossa-Morena Zone (OMZ), locally named the Série Negra succession (e.g. Carvalhosa, 1965;Gonçalves & Carvalhosa, 1994;Gonçalves & Oliveira, 1986;Oliveira et al., 1991). Previous investigations addressed its paleogeography, based on the petrographic and geochemical characterization of the inorganic fraction of the different lithologies of the Precambrian of OMZ, including the Série Negra succession (e.g. Chichorro et al., 2008;Lopes, 2015;Lopes et al., 2015;López-Guijarro, 2006;López-Guijarro et al., 2008;Oliveira et al., 2003;Pereira et al., 2006). However, the black shales from the Série Negra were never investigated in detail. The first approach to the characterization of the OM present in the black shales from the Série Negra was recently presented in Laranjeira et al. (2023), where the petrographic observation allowed the identification of dispersed organic matter exhibiting graphitic features, disseminated as flakes in association with iron oxides.
Considering the importance of black shales for paleoenvironmental studies and its potential association with the genesis of ore deposits, this work is a contribution to the knowledge of the Ediacaran black shales from Série Negra of OMZ, discussing its geochemical features, establishing the depositional paleoenvironmental conditions and the sedimentary sources based on geochemical proxies. Moreover, the role of these black shales as a possible source of metals is discussed.
The Série Negra succession has a distinct tectono-thermal evolution, depending on its location within the OMZ (Eguíluz et al., 2000;Oliveira et al., 1991;Pereira et al., 2006). Indeed, the Variscan metamorphic conditions are heterogeneous along the OMZ, being conditioned by first order tectonic structures (Moreira et al., 2014a). In the Blastomylonitic Belt and Montemor-o-Novo region, the Mosteiros Formation is highly deformed as a result of tectonometamorphic episodes related to high strain sinistral shear zones during Devonian-Carboniferous times, imposing metamorphism from upper greenschist to amphibolite facies conditions (Chichorro et al., 2008;Pereira et al., 2012b). Otherwise, in the Alter do Chão-Elvas and in the Estremoz Anticline sectors, the metamorphic peak conditions are related to a regional low-grade greenschist facies metamorphism (Moreira et al., 2014bPereira et al., 2012a).
The existing data suggests that the OMZ Ediacaran succession is related to the evolution of the North peri-Gondwana terranes (e.g. Linnemann et al., 2008;Pereira et al., 2006Pereira et al., , 2012a. During the Ediacaran, the sedimentary succession of this tectonostratigraphic zone records the inception of a magmatic arc and a corresponding back-arc basin. Hence, the sediments from the top of the Série Negra succession are interpreted as originating from the dismantling of this magmatic arc (Linnemann et al., 2008;López-Guijarro, 2006;López-Guijarro et al., 2008;Pereira et al., 2006;Sánchez-Lorda et al., 2014).

Sampling and methodology
Representative samples of low to medium-grade black shales from Série Negra succession outcropping in the different sectors from OMZ were collected. For sampling, the topmost layer has been removed to avoid the most weathered material. Visual inspection for mineralogical alteration allowed the removal of more altered parts of the samples. Samples ZOM 5, ZOM 6, ZOM 7, ZOM 16 were collected in the Blastomylonitic Belt (Fig. 1B, C), ZOM 12 was collected in the Alter do Chão-Elvas Sector (Fig. 1D), and sample ZOM 15 was collected in the Estremoz Anticline (Fig. 1E). Sample ZOM 16 (collected close to ZOM 6) was collected in the scope of a research project and the geochemical data was used in the present work.
Our data was complemented with previously published data, from other samples from the Ediacaran Série Negra succession of the OMZ (Lopes, 2015;Lopes et al., 2015;Pereira et al., 2006) namely the ones that were considered similar and, therefore, were used for comparison purposes. Two samples were described as very fine to fine-grained graphite-rich pelites (SN1 collected in Montemor-Ficalho sector and SN2 collected in the Blastomylonitic Belt, Fig. 1; Pereira et al., 2006). Four samples from Lopes (2015) were identified as metasedimentary lithologies containing graphite (LP1 to LP4 collected in Escoural-Montemor-o-Novo sector, Fig. 1). Pereira et al. (2006) reports that graphite-rich pelites are mainly composed of quartz, phyllosilicates and plagioclase with zircon, chlorite and apatite as accessory minerals. Laranjeira et al. (2023) also described the occurrence of iron oxides in addition to the previous mentioned detrital and metamorphic minerals.
Geochemical analyses from the black shales comprised the determination of the concentration of major, minor and trace elements. In the laboratory, the samples were dried, homogenized, and quartered to get representative portions that were milled to the fractions < 1 mm and < 212 μm. The chemical composition was determined using inductively coupled plasma emission spectrometry/ mass spectrometry (ICP-ES/MS) after digestion with an acid solution of H 2 O-HF-HClO 4 -HNO 3 , performed at Bureau Veritas Mineral Laboratories (Canada). Analysis of reference materials, duplicates and blanks was performed for quality assurance. The ICP-MS analysis of sample ZOM 16 was carried out in ALS laboratories (Seville, Spain), using the ME-MS81 and ME-4ACD81 analytical packages. Analytical procedures were: (i) Liborate fusion, acid digestion and ICP-MS analysis in 1 3 ME-MS81, and (ii) four acid digestion and ICP-AES analysis in ME-4ACD81.
Scanning electron microscopy with energy dispersive X-ray spectrometry (SEM-EDX) analyses were performed to determine qualitative chemical compositions and to identify minerals mode of occurrence. The observations using secondary electrons and backscattered electrons detection modes were made on polished blocks. The SEM-EDX analyses were performed with an FEI Quanta 400FEG environmental scanning electron microscope, equipped with a Genesis X4M energy dispersive X-ray analyser in Materials Centre of the University of Porto.

Geochemical composition of black shales
Tables 1 and 2 present the geochemical composition of major, minor and trace elements of the studied samples, together with TOC and total sulfur (TS) (Laranjeira et al., 2023), as well as the composition of BBS, NASC, PAAS, AS and UCC for comparison.
The most abundant major and minor elements in the studied samples are Al, Fe, K and Na, followed by smaller amounts of Ca, Mg, P, S and Ti. The chemical composition is consistent with the mineralogical composition described for black shales derived lithotypes of the Série Negra (Laranjeira et al., 2023;Pereira et al., 2006). Aluminum, Fe, K, and Na are the elements that have greater variability amongst the studied samples (Fig. 2). Generally, the samples show a similar pattern, except: (1) sample ZOM 6 that has distinct patterns for Fe, K and Mg content; and (2) sample ZOM 15 that has a notorious higher K content.
The concentration and distribution pattern of selected trace elements is illustrated in Fig. 3. Generally, the elements As, Ba, Be, Co, Cr, Cu, Ga, Hf, Mn, Nb, Ni, Pb, Rb, Sc, Sr, Th, U, Y, V, W, Zn and Zr are found in concentrations above 1 ppm. Elements with concentrations below 1 ppm are Ag, Bi, Cd, In, Ta, Te and Tl. The elements Cs, Mo, Sb, Se and Sn are found in concentrations above and below 1 ppm.
The distribution pattern of the selected elements is quite similar, except for the samples ZOM 6 and ZOM 15. These differences are particularly evident for ZOM 6 sample with lower concentrations of Ba, Cs, ln, Li, Mn, Nb, Rb, and Tl content; whereas the elements Ag, Cd, Cu, Pb, Se, Te and U display higher concentrations (Fig. 3, Tables 1 and 2). Sample ZOM 15 also stands out due to the higher concentrations of As, Ba, Th and ƩLREE (Fig. 3, Tables 1 and 2).
The ƩREE varies from 115 to 330 ppm, with an average value of 194 ppm ( Table 2). The REE patterns of the studied samples normalized to BBS (maximum), NASC, PAAS and AS are presented in Fig. 4. The normalized patterns are relatively similar, showing flattened profiles, that are successively less smooth and depleted in heavy REE (HREE) (Fig. 4). This depletion is common in black shales, demonstrating that the patterns were not severely affected by the diagenesis, weathering and metamorphism of the rocks (Boyong et al., 2011). Sample ZOM 7 shows evidence for more differentiated and depleted profiles than the other samples, principally for HREE. Sample ZOM 15 exhibits a more differentiated and enriched profile for light REE (LREE).
In order to compare the geochemical composition of samples with reference values, specifically the BBS (Ketris & Yudovich, 2009), NASC (Condie, 1993;Gromet et al., 1984;Taylor & McLennan, 1985), PAAS (Condie, 1993;Taylor & McLennan, 1985), AS (Pipper, 1974;Wedepohl, 1971) and UCC (Rudnick & Gao, 2014), concentration coefficients (CC) were calculated. The ratio between elements concentration in the samples and their concentration in reference data gives information about the enrichment (CC > 1) or depletion (CC < 1) of those elements in the studied black shales comparatively to the reference materials. Considering the range for BBS, the CC were calculated considering the maximum values. For REE, the CC were calculated considering the sum of LREE and HREE. Table 3 displays, for each sample, the group of elements having 1 < CC < 2, 2 < CC < 10, and CC > 10, indicating an increasing degree of enrichment.
The determination of CC reveals that many elements are depleted or have concentration similar to those from the reference materials, being normal (CC < 1) to slightly enriched (1 < CC < 2) ( Table 3). Considering the BBS, only Ba and Th are enriched in sample ZOM 15. For the other reference materials, this is, for NASC, PAAS, AS and UCC, some elements (Ag, As, Cs, Ba, Bi, Cd, Cu, Mo, Pb, Sb, Sn, Se, Th, Tl, U, V, and LREE) generally have CC > 2, although Ag, As, Bi, and Se have CC > 10 in some samples (mostly ZOM 6 and ZOM 15; Table 3). The elements showing CC > 10 are chalcophile elements, with low affinity for oxygen and preferentially bonded with sulfur to form sulfides.

Microscopic analysis
The SEM-EDX analyses of the black shales support and provide new insights about their geochemical composition, elemental distribution, and mineralogical content. The SEM-EDX analysis was performed in selected samples (ZOM 6 and ZOM 15). The analyses allow the identification of aluminosilicates, Fe and Ti oxides, and OM in both samples (Figs. 5 and 6). The identified minerals corroborate the previous petrographic observations (Laranjeira et al., 2023). Selected EDX spectra are presented as supplementary material (Figs. S1 and S2).
In the sample ZOM 6, the SEM analysis shows abundant aluminosilicates (Fig. 5, spectrum Z1 in Fig. S1), including some particles occurring in association with Fe oxides (Fig. 5,spectrum Z3 in Fig. S1) and with Ti oxides (Fig. 5, spectrum Z2 in Fig. S1); the detection of inorganic elements from both the aluminosilicates and Fe and Ti oxides in spectra (Fig. 5, spectra Z2 and Z3 in Fig. S1) evidence their association.
In sample ZOM 15, it was also possible to observe the occurrence of aluminosilicates (Fig. 6A, spectra Z1 and Z3 in Fig. S2) in association with Fe, Mn and Ti oxides (Fig. 6A, spectrum Z2 in Fig. S2) and with sulfides, namely arsenopyrite and pyrite (Fig. 6A, respectively spectra Z4 and Z5 in Fig. S2). The observation of Ti oxides in both samples and the significant positive correlation between Fe, Mn and Ti (Table 4) may indicate the presence of ilmenite.
In Fig. 6B it is possible to observe the occurrence of particles exhibiting the association of Fe oxides (Fig. 6B, spectrum Z7 in Fig. S2) with OM (Fig. 6B, spectrum Z6 in Fig. S2) within aluminosilicates (Fig. 6B, spectrum Z8 in Fig. S2). This is supported by the positive correlation coefficients between TOC and some elements preferentially  associated with sulfides. The detection of inorganic elements besides C in spectrum Z6 is related to its occurrence within mineral matter.

Elemental distribution
The Pearson's correlation coefficients were calculated, and particular attention was given to the enriched elements (CC > 2). Table 4 shows the Pearson's correlation coefficients for selected elements.
The results reveal a significant positive correlation coefficient between TOC and the trace elements Ag, Bi, Cd, Cu, Mo, Ni, Pb, Se, Sr, Te, U, and Y (r > 0.75; Table 4). The association of some of these elements with OM has been already reported in the literature (e.g. El-Anwar et al., 2018;Finkelman et al., 2018;Ribeiro et al., 2019;Ross & Bustin, 2009). However, the preferential affinity of some of them with sulfides is also noticeable. To investigate the sulfides affinity, the correlation coefficients with S was analysed; it was found a weak positive correlation with TOC (r = 0.48) and a strong positive correlation (r > 0.75) with elements normally present in sulfides (Ag, Cd, Cu, Pb, and Se) (El-Anwar et al., 2018;Finkelman et al., 2018). Therefore, Ag, Cd, Cu, Pb and Se are thought to be preferentially associated with sulfides, whereas the elements Mo and U might be preferentially organically bound.
The moderate positive correlation between TOC and S indicates the occurrence of sulfides in association with OM, which corroborates the previous petrographic characterization of these samples (Laranjeira et al., 2023). The petrography revealed the occurrence of OM associated with iron oxides, including oxidized pyrite, and other sulfides. Iron displays positive correlation with Al, Ti and Mn, which indicates its association with aluminosilicates and oxides. In addition, for the referred elements, Ag, Bi, Cd, Cu, Mo, Pb, and Se they present CC > 2 in the studied black shales comparatively to reference materials (except BBS), reinforcing their importance in the studied samples, and the importance of the occurrence of OM in association with sulfides and oxides.
Most of the other elements have a negative correlation with TOC and a positive correlation with Al, pointing out their association with aluminosilicates (El-Anwar et al., 2018;Finkelman et al., 2018). These include, among others, Ba, Sn, Th, Tl, and LREE, which also have CC > 2.

Sedimentary sources and geochemical proxies of paleo-redox environments
The geochemical discriminant diagrams (Bhatia & Crook, 1986;Floyd & Leveridge, 1987) show that the clastic compounds of black shales derived essentially from a Continental Island Arc source ( Fig. 7A and B), with acidic to mixed felsic/basic signatures (Fig. 7C). This data is consistent with the one obtained in previous works for diverse lithotypes including metamorphosed greywackes and shales, as well as para-derived high temperature lithotypes from Série Negra succession (Lopes, 2015;López-Guijarro, 2006;Lopes et al., 2015;Pereira et al., 2006). This data is also in accordance with the main geodynamic model proposed for the evolution of OMZ, which indicates the development of magmatic-arc and related back-arc basin in the North Gondwana realm, where the OMZ was located, during late Ediacaran times (e.g. Chichorro et al., 2008;Linnemann et al., 2008;Pereira et al., 2006;Sánchez-Lorda et al., 2014). The ratio between some trace elements (e.g. Co, Cr, Cu, Mo, Ni, Th, U, V, Zn) has also been used as proxies for evaluation of redox depositional conditions during the sedimentary processes (e.g. Arning et al., 2009;El-Anwar et al., 2018;Ferreira et al., 2020;Jones & Manning, 1994;Pi et al., 2013). The ratios V/Cr, Ni/Co, U/Th and (Cu + Mo)/ Zn, whose values increase under anoxic conditions, were calculated. Complementarily, TOC/Al and U/Mo for the studied samples were also determined and are all presented in Table 5.
The ratio V/Cr in samples ZOM 6 (3.97) and ZOM 12 (2.63) indicate anoxic conditions, while the other values, ranging from 1.17 to 1.56, point to more oxidizing conditions (according to Jones & Manning, 1994, values of the ratio V/Cr above 2 indicate anoxic depositional conditions). Samples ZOM 6 and ZOM 12 present the higher V concentrations (147 ppm and 284 ppm, respectively), which indicate a V enrichment in these samples compared with reference materials (except the maximum for BBS) and supports the fact that V is more concentrated in sediments deposited under reducing conditions (e.g. Emerson & Huested, 1991;Jones & Manning, 1994;Shaw et al., 1990). Similar paleo-redox conditions are also emphasized by the ratio (Cu + Mo)/Zn, indicator of the oxygenation of bottom waters (Hallberg, 1976(Hallberg, , 1982, which show higher ratio values in samples ZOM 6 (3.97) and ZOM 12 (2.07).
The high values of Ni/Co ratio show similar behavior for samples ZOM 6 and ZOM 12, including the sample ZOM 15 (Table 5) on samples that emphasize stronger reducing conditions during depositional processes (e.g. Dill, 1986;Dypvik, 1984;Jones & Manning, 1994). Tribovillard et al. (2006) suggested that the presence of Ni can be used as a proxy for primary paleoproductivity due to its accumulation in organic-rich sediments, which is also in accordance with the CC between TOC and Ni ( Table 4).
The ratio U/Th is also usually used as a redox indicator (e.g. Adams & Weaver, 1958;Roger andAdams, 1969 in Jones &Manning, 1994;Ferreira et al., 2020). The increase of U/Th ratio is expected with the increase of anoxic conditions due to the accumulation of authigenic U in organic sediments,that is enhanced during deposition under progressively greater oxygen depletion (Ferreira et al., 2020). Indeed, the projection of U/Th and V/ Cr ratios (Fig. 8) reveals that sample ZOM 6 is associated with anoxic conditions (similar to BBS) and sample ZOM 12 is associated with a suboxic domain. The other samples and reference materials are projected in the oxic conditions field, as well as organic-rich pelites of Pereira et al. (2006) and metasedimentary lithologies with graphite from Lopes (2015).
The ratio U/Mo has also been used to differentiate between anoxic non-sulfidic and anoxic sulfidic conditions (Arning et al., 2009). The lowest values of U/Mo were  (Z1), titanium oxides and associated aluminosilicates (Z2), and iron oxides and associated mineral matter (Z3) in sample ZOM 6. The spectra of EDX analysis of Z1 to Z3 are presented in Fig. S1   Fig. 6 SEM images of: A aluminosilicates (Z1 and Z3) and associated mineral matter, titanium oxide (Z2), pyrite (Z4) and arsenopyrite (Z5) in sample ZOM 15; B organic matter and associated mineral matter (principally aluminosilicates) (Z6), iron oxides and associated aluminosilicates (Z7) and aluminosilicates (Z8) in sample ZOM 15. The spectra of EDX analysis of Z1 to Z8 are presented in Fig. S2 1 3 obtained for samples ZOM 6 (2.09) and ZOM 12 (0.71), resulting from highest Mo concentration in this samples and, therefore, indicating that were deposited under more anoxic sulfidic conditions Algeo & Maynard, 2004). This is also supported by the higher concentration of elements with affinity with sulfides on sample ZOM 6.
The Eu and Ce anomalies are also important proxies because these elements are sensitive to changes in redox conditions due to their different behaviour when compared to other REE (Leybourne et al., 2000): -The normalized patterns reveal a positive Eu anomaly for almost all samples (Eu/Eu* = 0.96-1.69, average 1.25; Table 2; Fig. 4). The higher Eu positive anomalies in   Bhatia and Crook (1986); B Ternary Th-Sc-Zr/4 diagram adapted from Bhatia and Crook (1986) and C La/Th-Hf diagram from Floyd and Leveridge (1987) (Elderfield & Greaves, 1982) and can also be used as an indicator of intensity of anoxia depending on the depositional setting (e.g. Murray et al., 1990;Wilde et al., 1996). Only the sample ZOM 5 shows a positive Ce anomaly (Ce/ Ce* = 1.30), while the remaining samples have slightly negative anomalies (Ce/Ce* = 0.88-0.96) ( Table 2; Fig. 4), which may reflect less reducing conditions in sample ZOM 5.
Interrelating the Eu and Ce anomalies (Fig. 9), samples ZOM 16 and ZOM 5 seem to be related to more oxidizing environments, while the other samples seem to be deposited in more reducing depositional conditions (Fig. 9).
All the used ratios (Table 5), as well as the Ce and Eu anomalies, revealed that the samples ZOM 6 and ZOM 12, and secondarily the sample ZOM 15, were deposited under anoxic conditions, while the other samples were deposited in more oxidizing conditions, although with dissimilar paleoredox conditions. This is consistent with the TOC values that are higher in ZOM 6 and ZOM 12, in which the redox conditions favored the OM preservation, and the increase of some redox sensitive elements (e.g. Mo, U, V). Samples ZOM 5, ZOM 7 and ZOM 15 behave consistently presenting lower TOC values (< 1%), and redox sensitive proxies pointing to more oxic to suboxic depositional conditions. The same pattern was found for organic-rich pelites and metasedimentary lithologies with graphite from the Série Negra of OMZ (Lopes, 2015;Pereira et al., 2006). Therefore, the Série Negra succession can be interpreted as related to the erosion of the Cadomian magmatic-arc, being deposited in proximal back-arc basin. The geochemical composition of black shales from this succession indicates discrepant anoxic conditions, which can be interpreted as resulting from the variation of paleoredox conditions within the back-arc basin generated during the last episodes of the magmatic-arc inception.

Série Negra as possible source of metals
The diversity of ore deposits and mineral occurrences in OMZ result from a complex tectono-metamorphic evolution derived from the location of the OMZ within Iberian Massif and the existence of several magmatic-hydrothermal events during the Cadomian and Variscan Cycles (Liñán & Quesada, 1990;Tornos et al., 2004).
In Alter do Chão-Elvas and Estremoz Anticline Sectors (Central Belt), several Cu mineralizations are present (Matos & Filipe, 2013), most of these mineralizations are interpreted as late Variscan Cu-Veins (Maia et al., 2020;Mateus et al., 2013) hosted in Paleozoic successions. In the North-Central Belt (Alter do Chão-Elvas sector) most of Cu, Zn and Pb occurrences are hosted in Lower Cambrian Succession (Mateus et al., 2013;Oliveira, 1986), being concurrently described some Au and Ag enrichments in similar occurrences in Spain (Tornos et al., 2004). Figure 10 shows the enrichment of selected elements that may have affinity with Au, Pb, Zn and Cu, namely, Ag, As, Bi, Cd, Co, Cr, Mo, Ni, Sb, Se, U and V (Huyck, 1989;Large et al., 2011). Although the Au content was not analyzed in the studied samples, several elements have a geochemical affinity with Au, and can be used as proxies to discuss the potential presence of Au. All samples present a significant enrichment in As and Se, both with strong affinity with Au (Large et al., 2011). Samples ZOM 6 and ZOM 12, with higher TOC, also shows significant enrichment in Bi and Mo, in addition to Ag and Cu on sample ZOM 6 and Sb on sample ZOM 12. The presence and relative enrichment of these elements in the mentioned samples could be indicative of primary presence of Au. Furthermore, samples ZOM 6 and ZOM 12 are associated with anoxic to suboxic environments, which favor the formation of significant amounts of diagenetic pyrite (Large et al., 2011;Tribovillard et al., 2006), although diagenetic pyrite can form in a wide range of conditions. It is noteworthy that the petrographic and SEM observations (Laranjeira et al., 2023) reveal the presence of pyrite crystals in sample ZOM 6.
Previous studies on OM-rich sediments showed that some Au deposits have a strong positive correlation with As and S contents (Large et al., 2011). In reduced continental margin basin settings, the OM-rich sediments deposited under anoxic to euxinic conditions concentrate Au, As, S, and other trace elements such as Ag, Cu, Mo, Ni, Se, Te, V, U, and Zn in pyrite and arsenopyrite phases (Large et al., 2011;Tribovillard et al., 2006).
It is plausible that successive tectono-metamorphic processes, namely the Variscan shear zones, could remobilize Au, As, S and other elements (e.g. Bi, Cu, Mo, Pb, Sb, Te, Tl and Zn) from these OM-rich sediments to become concentrated by hydrothermal processes (Large et al., 2011).
Indeed, Tornos et al. (2004) suggest that OMZ orogenic Au mineralizations were probably formed by hydrothermal/ metamorphic fluids that leached Au contained in the Série Negra succession, in accordance with recent data from Maia et al. (2022) which suggest that the Neoproterozoic metasediments were the most probable suppliers of S and Au to the system. Therefore, the hydrothermal/metamorphic fluids related to Variscan transpressional shear zones may remobilize the Au content within black shales from Serie Negra succession, thus enabling the genesis of quartz-bearing veins and stockworks with a possible enrichment in Au. However, it must be emphasized that not all Serie Negra succession Fig. 9 Ce/Ce* and Eu/Eu* cross plot considering the studied samples and from samples of Série Negra of OMZ studied by Pereira et al. (2006) and Lopes (2015) containing graphite (SN and LP, respectively). The highlighted field represents a more reducing depositional conditions 1 3 lithotypes have a propensity to be an Au source. Indeed, only the black shales deposited in most anoxic environments (ZOM 6 and ZOM 12) seem to show an increase of content in elements with significant Au geochemical affinity.
If it is considered that the black shales of the Série Negra succession have a primary Au content, the depleted pattern of some samples (e.g. ZOM 7) may be interpreted as related to the remobilization of metals during Tomar-Badajoz-Córdoba shear events (Pereira et al., 2010(Pereira et al., , 2012b. Those remobilized metals may be focused, and the shear zone activity may form extensional structures, that allowed the precipitation of metals and, consequently, the genesis of some Au occurrences in the OMZ high grade domains (e.g. Montemor-o-Novo region and Blastomylonitic Belt).
Near the location where samples ZOM 5, ZOM 6 and ZOM 16 were collected, an occurrence of Pb-Zn is known, possibly related to late hydrothermal processes associated with the emplacement of Santa Eulália Plutonic Complex (Fig. 1A). This fact may explain the enrichment in Pb content in sample ZOM 6 relatively to the remaining samples. However, this increase could also be primary, because the other samples from this location (ZOM 5 and ZOM 16) do not show similar behavior.
Sample ZOM 12 is located near some Cu occurrences (Fig. 1A). According to what was previously demonstrated by the paleoredox ratios, sample ZOM 12 corresponds to suboxic to anoxic paleoenvironmental conditions and has a significant enrichment in Ag, As, Bi, Cu, Mo, Sb, Se, U and V (Table 3; Fig. 10). The positive correlations between TOC and some redox-sensitive elements, and specifically with Cu (r = 0.80) corroborates their formation and Cu enrichment formed under suboxic to anoxic conditions.

Conclusions
Black shales from Série Negra succession of OMZ were studied using a geochemical and mineralogical approach to trace the depositional paleoenvironments and the possible sources based on redox sensitive elements. The results indicate that the metal occurrences on OMZ and the black shales from Série Negra succession seems to be linked.
The clastic sources of the studied black shales are related with the dismantling of the Cadomian Continental Arc developed in the North Gondwana margin, showing acidic to mixed felsic/basic signatures, which is in accordance with previous proposed models.
The CC considering different reference materials reveal an enrichment (CC > 2) in several elements: Ag, As, Cs, Ba, Bi, Cd, Cu, Mo, Pb, Sb, Sn, Se, Th, Tl, U, V, and LREE. Samples ZOM 6, ZOM 12, and ZOM 15 have the high number of enriched elements. Some samples reveal CC > 10 for Ag, As, Bi, and Se. Based on Pearson's correlation coefficient and considering the significant positive correlations between TOC and S, it is demonstrated the association of OM with the occurrence of sulfides, corroborating the petrographic description of the samples. The elements Ag, Cd, Cu, Pb and Se are thought to be preferentially associated with sulfides, while the elements Mo and U must be preferentially organically bound. The Eu positive anomaly, the Ce negative anomaly and the ratios calculated based on redox sensitive elements indicate oxic to anoxic paleoenvironmental conditions, being more noticeable the anoxic conditions in samples ZOM 6 and ZOM 12, which are also the samples with highest TOC values. Those samples are enriched in Ag, As, Bi, Co, Cu, Mo, Sb and Se indicating that the BS deposited  (Condie, 1993;Taylor & McLennan, 1985) in anoxic environment and may represent an important source of metals as proposed by other authors.