Operationalizing the Exposome Using Passive Silicone Samplers

The exposome, which is defined as the cumulative effect of environmental exposures and corresponding biological responses, aims to provide a comprehensive measure for evaluating non-genetic causes of disease. Operationalization of the exposome for environmental health and precision medicine has been limited by the lack of a universal approach for characterizing complex exposures, particularly as they vary temporally and geographically. To overcome these challenges, passive sampling devices (PSDs) provide a key measurement strategy for deep exposome phenotyping, which aims to provide comprehensive chemical assessment using untargeted high-resolution mass spectrometry for exposome-wide association studies. To highlight the advantages of silicone PSDs, we review their use in population studies and evaluate the broad range of applications and chemical classes characterized using these samplers. We assess key aspects of incorporating PSDs within observational studies, including the need to preclean samplers prior to use to remove impurities that interfere with compound detection, analytical considerations, and cost. We close with strategies on how to incorporate measures of the external exposome using PSDs, and their advantages for reducing variability in exposure measures and providing a more thorough accounting of the exposome. Continued development and application of silicone PSDs will facilitate greater understanding of how environmental exposures drive disease risk, while providing a feasible strategy for incorporating untargeted, high-resolution characterization of the external exposome in human studies.

disease [6]. However, unlike genetic sequencing, measuring the cumulative effect of exposure over the lifespan comes with significant complications. Measurements of chemical exposure are compounded by the estimated millions of exposures that vary temporally over a lifetime, including environmental pollutants, chemicals in consumer-facing goods, biologics, and pharmaceuticals [7]. The relationship between many of these exposures and health effects is unknown, and there is a need to perform discovery studies that enable systematic characterization of the exposome and how it relates to health outcomes. These exposome-wide association studies require robust sampling strategies that can be incorporated into population studies and enable detection of a wide range of exposures. In this review, we highlight the advantages of considering measurement of the untargeted external exposome for new insight into the relationship between environmental exposures and disease. We discuss the use of silicone passive sampling devices (PSDs), which show considerable promise for untargeted measurement of external exposures within an exposome-wide association study framework. Analytical considerations, including untargeted analysis using high-resolution mass spectrometry and strategies for exposome data science, are discussed. Lastly, we provide a framework for using untargeted external exposure monitoring within a deep exposome phenotyping framework.

Operationalization of the Human Exposome
The exposome is unique in 'omic sciences because it represents an integrated measure across multiple compartments characterizing how non-genetic factors external and internal to the host influence disease risk. As a result, the exposome in its totality requires attention to impacts from internal, external, and psychosocial factors, many of which require separate approaches and study designs to measure. The internal exposome combines measurement of biological activity with internal dose biomarkers that can include levels of the parent chemical, transformation products, and adducts of reactive compounds. The external exposome includes environmental exposures to toxic chemicals, pollution, and radiation, while also incorporating behavioral variables like diet, exercise, and drug use. Non-specific exposures, such as social and psychological stressors, are the third component of the exposome. While these three compartments tend to be measured and considered separately, they are dependent and interrelated. All exogenous biomarkers (internal exposome) originate from exposures that occurred outside the host (external exposome), and many of these exposures can be both potentiated and varied depending on non-specific factors, such as stress and lack of sleep (psychosocial exposome) [8].

Measuring the Internal Exposome
Most efforts to date have focused on the internal exposome due to the availability of biological specimens collected and stored from well-established population studies. These include approaches that aim to identify chemical biomarkers to estimate exposure burden and its relationship to adverse health outcomes, as well as 'omic approaches that define specific phenotypes of exposure and disease. The most promising approaches for comprehensive measures of the internal exposome include untargeted high-resolution metabolomics, which detects low molecular weight compounds within a biological sample [9][10][11]. While initially developed to characterize disease-related changes in endogenous metabolites, methods that use high-resolution mass spectrometry (HRMS) show sensitivity and dynamic range to detect low-level chemical exposures and drugs, in addition to endogenous metabolites from critical pathways [9,12,13]. Continued advancement in HRMS instrumentation and computational approaches for data extraction has resulted in their widespread adoption for exposome research [14][15][16]. New applications show the strengths of HRMS to understand chemical phenotypes of exposure for environmental stressors, exposures during pregnancy and other life stages, occupational exposures, and environment-disease relationships [17][18][19][20][21][22][23][24][25]. When combined with additional 'omic measures, HRMS provides a systems biology approach to link exposure to internal dose, biological response, and disease [6]. Within this framework, internal dose is assessed by screening for the presence of metabolites that arise from exogenous chemicals, while biological response to exposure is determined by identifying alteration in endogenous processes (e.g., gene, protein, and metabolite expression). Biological alterations associated with exposure or disease can be considered separately using a "meet-in-the-middle" approach, and overlapping associations reinforce a causal relationship between exposure and disease, providing insight into underlying disease mechanisms [26][27][28]. However, interpretation of these results can be challenging due to exposure timing, varied or unknown biological half-lives of exposure biomarkers, and complex exposure-response effects that occur in distal tissues.

Measuring the External Exposome
External exposome monitoring provides a standalone, but complementary, measure of environmental stressors [29]. Unlike measurements for the internal exposome, which tend to be precise to the individual, precision for the external exposome varies depending on measurement strategy. When estimating inhalation and location-driven exposures for populations over large geographical areas, geospatial/ remote sensing and regional stationary sampling approaches are often used [30][31][32]. Air pollution is often assessed with satellite-based surface-point differentiation, and remote sensing methods have also been used to assess distance to green and blue space, temperature, and light pollution [33]. Chemical exposures can be estimated using distance from known pollution sources, such as location relative to contaminated sites, or surface and groundwater pollution [34]. Stationary samplers that incorporate sensors can provide highly accurate measurements at a single location over time, while others that use absorbent sampling material to collection pollutants provide an integrated measure over the observation period. These point-measurements from stationary samplers are then often extrapolated to estimate regional concentrations. Depending on the age of the samplers or satellites, these approaches provide temporally dense measures to estimate exposure histories for large populations, a key advantage when studying how past exposures influence current health outcomes [35][36][37][38][39][40][41][42]. However, many of the techniques used to estimate exposures are limited and lack the precision to assess microenvironment changes. The use of mobile sampling devices, including automobiles or drones that include adjustment for time and activity patterns using smart phones, has improved accuracy; however, these approaches still cannot account for high variability due to activity and changes in microenvironment exposure levels.
Individual exposome monitoring focuses on characterizing interactions between a person and exposure sources. As a result, multiple strategies are possible, including detection of chemical exposures in food or water and characterization of the indoor and outdoor microenvironments [43]. To measure inhalation exposures, mobile samplers are often worn by study participants or can be placed throughout different microenvironments to improve measurement resolution. These samplers can be active, which combines a pump with samplers to quantitatively measure exposure, as well as PSDs, which collect time-integrated concentrations of chemicals through passive diffusion into the sampler matrix. Though various designs for active samplers have been developed, key limitations include the need for an external battery to power sampling pumps, frequent calibration to verify air flow, and expensive equipment. Thus, active samplers can be difficult to operate and uncomfortable to carry, especially for children [44][45][46][47]. Passive samplers, which rely on less invasive technologies such as adsorbent strips and wearables like silicone wristbands, pouches, and badges, provide an alternative strategy to screen for both known and unknown exposures in large populations. PSDs validated for exposures with known uptake rates, such as benzene or trichloroethylene, have been widely used in occupational monitoring studies for industrial chemicals [23,[48][49][50][51][52][53][54]. However, for most PSDs, ongoing research is focused on better understanding the mechanisms for chemical equilibrium with sampler matrices, which can vary by chemical molecular weight, media pore size, and silicone/air partitioning coefficients [55]. Determining these parameters for different PSD materials and designs is necessary for understanding biases when this approach is used for exposure monitoring.
To better incorporate the exposome into the study of human health, there is a critical need to leverage strategies that enable comprehensive characterization across different exposome compartments. To achieve the power necessary to identify how low-level exposures and associated mixture effects contribute to disease outcomes, it is necessary to use approaches that allow low-cost sampling options and can be deployed in large populations. Current studies show how biospecimens, including blood, urine, and saliva, combined with untargeted assays, provide a solution for internal exposome characterization [7,[56][57][58][59]; however, no similar approaches are routinely available for the external exposome. In the following sections, we review the use of innovative silicone PSDs that show considerable promise as sampling devices to screen the external exposome.

Passive Sampling Devices for External Exposome Profiling
PSDs are non-invasive, easy to distribute, and can overcome many of the limitations that complicate interpretation of exposure biomarkers in biological samples [60]. While the configuration and material can vary, resulting in differences in uptake kinetics and exposure sampling, PSDs generally include some type of sorbent material allowing diffusion within the sorbent matrix following air or surface contact. Ideal sampling materials show linear uptake, high capacity, and reproducible sampling behavior under typical deployment conditions. When displaying these properties, PSDs have the ability to collect a time-averaged, personalized measurement of respiratory and/or dermal chemical exposures. Many of these properties are dependent on sampler material, the analyte of interest, and the sampler design, as such, PSD validation for specific analytes may be needed if strict quantitation is required. PSD configurations and placement can also be optimized to detect specific routes of exposure. For example, some are designed to only measure airborne exposures by minimizing contact with media other than air, either by encasing sampling material or by placing as a brooch over clothing [61][62][63]. Others, such as wristbands, show promise as an integrated measure of multiple exposure pathways [64].
Ideal PSDs for exposomic studies should have high partitioning coefficients for compounds with a wide range of physiochemical properties, be cheap to manufacture, and be provided in a form that is easy for the participant to use. While multiple strategies have been proposed, the use of commercially available silicone wristbands has shown to provide a versatile, low-cost PSD that enables screening for a broad range of chemical exposures [65][66][67]. As a result, use of PSDs that are primarily composed of polydimethylsiloxane and other silicone elastomers are one of the more commonly used sampling materials for PSDs. In Table 1, we summarize the human exposure studies completed to date that leveraged commercially available silicone materials as PSDs for human exposure monitoring.
Of these studies, wristbands were the most commonly used PSD device, while a limited number used multiple placement strategies to isolate exposure pathways, including brooch samplers for airborne respiratory exposures, and isolated wristbands to minimize dermal contact [46, 61-65, 68, 69]. Silicone PSDs have been used to measure different classes of environmental pollutants, including polycyclic aromatic hydrocarbons (PAHS), brominated and organophosphate flame retardants (B-or OFR), pesticides and insecticides, phthalates, passive tobacco smoke exposure, and volatile organic chemicals (VOCs), among others. In most cases, PSDs exhibited high affinity for these chemical classes, highlighting the benefit of using this material for exposome monitoring. Most study participants wore wristbands for 7 days, with some studies extending to 30-day continuous wear periods [65,67,70].
Most PSDs (84%) were characterized using targeted approaches, where specific chemical classes were quantified with in-house analytical standards. An additional 18% of the studies included some form of suspect screening. Most exposures included volatile and semi-volatile compounds measured using gas-chromatography (GC), including single-and triple-quadrupole mass spectrometers, with some studies leveraging electron capture detectors for increasing specificity towards halogenated compounds [60,67,71,72]. Only a few studies combined GC with HRMS, including time of flight (TOF) and Orbitrap mass spectrometers [61][62][63][73][74][75][76][77][78][79]. Of the studies using HRMS technologies, only 50% were untargeted, defined as methods that used data-driven approaches for signal detection, filtering, and annotation. The use of liquid chromatography (LC) methods, which enables detection of many contemporaryuse pesticides and emerging chemicals of concern, was also limited. Five studies included LC-MS analysis of wristbands, with one measuring pesticide exposures, one phenol exposure, one SVOCs, and the remaining two focused on passive tobacco smoke exposure [80][81][82][83][84]. None of these studies used LC-HRMS, a key technology for untargeted screening of many environmental exposures [85,86].
Since the use of silicone PSDs is a new approach for passive exposure monitoring, 38 of the 44 reviewed studies combined PSDs with validated approaches for assessing exposures, including comparison to biomarker levels and established sampling devices. These include quantification of known exposure biomarkers in blood and urine [45,68,81,87,88], hand wipes [64,75,87], active air sampling [45,46,89,90], and low-density polyethylene PSDs [67,91], as well as using questionnaires to estimate past exposures [60,61,77,78,81,82,84,87,88,92,93]. Findings include a significant correlation between the PSD chemical concentrations and accepted biomarker measurements in urine [45,87], demonstrating usability of silicone PSDs to evaluate personal exposures. These samplers similarly showed high specificity to detect unique chemical profiles, including detection of exposure profiles based on dietary and behavioral trends, as well as unique chemical signatures within different rooms of the same residence [84,94].
Most of the reviewed studies include questionnaires to associate PSD detected chemical classes with behavioral, lifestyle, and demographic patterns that may influence exposure patterns and potential health outcomes. Although few studies focus on biological endpoints, recent applications have attempted to link PSD measurements to health outcomes, including DNA damage biomarkers [72], thyroid function [95], social behaviors in children [96], and respiratory-related disorders [62]. Interestingly, one study combined wristbands with effect-directed analysis (EDA) to identify wristband-captured exposures contributing to thyroid dysfunction [76]. In this study, extracted wristbands were tested using gene-reporter assays that evaluate thyroid disrupting bioactivity, providing a biological-based prioritization of compounds potentially contributing to adverse effects.
One of the challenges facing large-scale adoption of silicone-based PSDs for monitoring multiple exposures is uncertainty in partitioning and diffusion rates into the sampler matrix for compounds showing a wide range of physical-chemical properties [67,91]. Contact with surfactants and oils, such as soaps and lotions, may also influence uptake of certain compounds. Since chemical uptake into wristbands vary, estimating environmental concentrations can be difficult [72]. To improve quantitative interpretation, recent efforts have focused on identifying partitioning coefficients by chemical class [44]. Silicone PSDs have been shown to outperform traditional sampler materials like lowdensity polyethylene (LDPE), showing improved sequestration of polar compounds and heavier polybrominated flame retardants [91]. However, other chemical classes have shown lower affinity for silicone, including PAHs [97]. While this could limit detection of important air-and smoke-related exposures, silicone showed a higher correlation with urinary PAH metabolites and outperformed polyurethane foam combined with active air sampling [45]. Sorbent bars coated in polydimethylsiloxane showed comparable performance for sampling for higher molecular weight PAHs, with stable uptake for periods greater than 24 h [62]. Additional chemical classes showing good affinity for PSDs include OFRs, compounds in tobacco smoke, and plasticizers [75,87]. Silicone conditioning refers to the precleaning process to remove impurities and free siloxanes from the silicone matrix prior to deployment. Solvent conditioning use solvent-based extraction methods for preparing wristbands. Heat conditioning uses a combination of heat treatment and vacuum to remove free siloxanes PSDs are available commercially in a wide range of colors and sizes and can be modified to include text through embossing/debossing. While price varies depending on vendor, amount purchased, color/text options, and size, most are available at low cost (< $0.50 USD) and provide an economical solution for PSDs. However, wristbands purchased commercially often contain a high degree of impurities that can interfere with measurement sensitivity. Before deployment, thorough conditioning and cleaning are required to remove unbound siloxanes and other impurities [44,65]. Dyes and inks can further contribute to background impurities, and testing should be performed to assess their impact before use. If available, uncolored or clear silicone materials should also be considered [68]. The importance of conditioning prior to wristband deployment is highlighted in Fig. 1. Uncleaned samplers result in a high degree of co-extracted siloxanes (Fig. 1A) that can impact compound detection, foul GC columns, and introduce a high degree of instrument contamination. Wristbands cleaned using solvent washing or heat treatment remove the majority of impurities present in the silicone (Fig. 1B), enhancing detection of exposures following wristband deployment (Fig. 1C). The most common method for silicone conditioning includes a series of washes using organic solvents, including ethyl acetate, methanol, hexanes, and pentane (Table 1). Wristbands are often equilibrated with each solvent for a period ranging from 30 min to multiple days [65,87,98]. Following all washes, wristbands are allowed to dry under an inert gas or in a clean environment prior to packaging for distribution.
While solvent washing can remove a significant number of impurities, this approach is expensive, time consuming, and difficult to adapt to large quantities. Recent attempts to lower time and cost of conditioning have been developed, including re-use of solvents and accelerated methods that reduce solvent-washing [44,84]. Heat conditioning provides a suitable alternative to solvent washing and can result in considerable savings in personnel time and solvent costs [44]. When using heat conditioning, wristbands are heated to 250-300 °C and maintained under vacuum (< 1 Torr) with periodic nitrogen flushing. Heating times can vary, with some studies showing 3 h provides sufficient removal of siloxanes; experience with heat conditioned wristbands for untargeted analysis suggests periods of 20-24 h may be more suitable. Depending on the size of the oven, it is possible to prepare 50-100 wristbands per day. While heat conditioning improves wristband preparation throughput, effects of high temperatures on the silicone material, removal of less volatile siloxanes, and frequent cleaning of vacuum systems must be considered. All new batches of silicone must be tested for suitability with heat conditioning, as even minor changes in manufacturing can influence how silicone elastomers respond to the heating process. Cost-effective and robust conditioning of a large number of silicone PSDs is one of the main barriers for use in large population studies. While current conditioning approaches can increase costs by 50-1000-fold, continued development of heat conditioning and alternative strategies is expected to decrease cost and improve capacity.
Following deployment of silicone PSDs, exposure-related compounds must be removed from the matrix and transferred to a form that is amendable to the chosen analytical method. Since the majority of silicone PSDs have focused on volatile and semi-volatile exposures, most commonly used preparation methods are GC-friendly and include solvent extraction or thermal desorption (TD) ( Table 1). The most common solvents for extraction include ethyl acetate, hexane, and dichloromethane. Extracts can then be processed through additional steps, including solvent evaporation and exchange, cleanup using solid-phase extraction (SPE), or injection as is. Care must be taken when selecting processing steps, as significant analyte loss could occur depending on the physiochemical properties of the analytes. For example, selection of extraction solvents with high octanol-water partitioning coefficients (K ow ) may prevent extraction of more polar compounds, while drying steps can result in loss of volatile compounds.
TD methods have been used extensively for environmental sampling of volatile compounds, as well as analysis of silicone PSDs [44,99]. When using TD to analyze PSDs, silicone samplers are heated so that compounds are volatized and either injected directly onto the GC column or trapped using filters prior to analysis. The advantages of these methods for deployed silicone samplers include improved sample preparation times, reduction in co-extracted matrix and nonvolatiles that can foul GC systems, and the ability to characterize highly volatile organic compounds. Development of the Fresh Air wristband, which uses thermal desorption to analyze polydimethylsiloxane PSDs, shows it is possible to measure many different volatile and semi-volatile environmental exposures, and can be combined with untargeted analysis to identify exposures associated with health outcomes [61][62][63]. Although limited, LC analyses of wristbands have all used solvent extraction sample preparation methods, which is consistent with better detection of non-volatile and polar compounds [80][81][82][83][84].

High-Resolution Mass Spectrometry for Measuring the External Exposome
Although PSDs have received considerable attention for exposure monitoring, their combination with untargeted analysis is limited and most applications have focused on measuring common classes of known exposures. These studies provide important insight into chemical exposures in human populations but do not allow detection of unsuspected or uncharacterized chemical that may be driving health effects [6,100]. Untargeted analyses depend upon methods that use HRMS, as it enables sensitive detection of low-level chemicals while providing sufficient mass accuracy and resolution for prediction of chemical formulas [7]. One of the first studies to combine silicone PSDs with untargeted analysis used GCxGC-TOF to identify personal exposure pattern variation for 27 participants across multiple regions within an urban environment [78]. Wristbands were characterized using a combination of targeted and untargeted methods, with targeted analysis including semivolatile organic compounds (SVOCs). Untargeted results showed variable exposure profiles that included up to 1,000 detected chemical features and identified distinct clusters of compounds that distinguished seasons and regions. Targeted SVOCs showed no difference among these regions, highlighting the importance of expanding beyond known exposures when considering variability in individual exposome profiles.
The Fresh Air wristband, which includes a polydimethylsiloxane coated sampler bar located in an enclosed PTFE chamber, has been used extensively with GC-based HRMS methods that include Orbitrap and QTOF-based analyses for sampling exposures [101]. Using untargeted analysis, Koelmel et al. incorporated stringent filtering and deconvolution strategies to detect and identify exposures, including up to 615 high confidence annotations from the original 6,000 chemical signals detected in samplers worn by participants enrolled in a study designed for identifying biomarkers of air pollution [63]. Due to their flexible sampler design, they have also shown that PSD placement, season, and residence type influence exposure profiles. Their work underscores the high sensitivity of PSDs when combined with untargeted analysis, and how this can be leveraged to characterize the external exposome and routes of exposure [61,62].
Recently, ultra-high-resolution mass spectrometry methods have been applied to stationary silicone PSDs to evaluate microenvironment exposures, as well as silicone wristbands worn by study participants. In the study by Kalia et al., silicone samplers were placed throughout different rooms within a residential location for a period of 7 days and analyzed using untargeted GC-HRMS [94]. Although none of the detected chemical features were identified, 1,347 signals were measured across all samplers located within one residence after correcting for background using field blanks. Comparisons between rooms in the same residence using principal component analysis (PCA) showed detection of room-specific signatures was possible. Untargeted GC-HRMS has also used to characterize silicone wristbands worn by study participants; the results from this study show benefits of untargeted methods to characterize the exposome using PSDs, and demonstrate potential influence of sample and data processing on detected chemicals [74].
Many chemicals of emerging concern (CECs) are only detectable using LC-HRMS methods and are known to be volatilized and transported on aerosols; these include perand polyfluorinated alkyl substances (PFAS). PFAS and many other CECs are ionizable, and partition between the gas and particulate phase depending on interaction with aqueous aerosols and matrices, resulting in unique interactions with PSDs dissimilar from nonpolar SVOCs and persistent organic pollutants [102]. Novel PSD designs have been developed to characterize PFAS and other target CECs in indoor air [103], outdoor air, [104], and aqueous matrices [105,106]. Limited research has paired untargeted LC-HRMS analyses with PSD deployment of any kind [107], though active sampler applications with untargeted analysis show important airborne exposures from both biotic and abiotic sources can be detected using LC-HRMS and combined with biological endpoints, thus predicting disease risk [29,108]. To date, untargeted LC-HRMS has not been used to characterize personal exposome profiles using wearable silicone PSDs, despite well-established instrumental protocols for detection of low abundance, polar environmental chemicals. This data gap highlights an opportunity for optimization of wearable PSDs for semi-polar and polar chemicals suitable for LC-HRMS analysis, potentially leveraging sorbent or material modifications and innovative untargeted analytical workflows.

Analytical Considerations for Untargeted Analysis of Silicone PSDs
While targeted methods provide excellent sensitivity and can generate new insight into ongoing exposures, costs increase with the number of chemicals analyzed [109]. Thus, development of targeted exposome-level assays is cost-prohibitive and does not enable detection of unknown and uncharacterized exposures. Since untargeted analytical methods using HRMS maximize the number of chemicals that can be measured in a single sample, these approaches are optimal for combining the exposome with silicone PSDs. The most commonly used HRMS platforms include QTOFs, which estimate accurate mass based on the time an ion takes to traverse a given flight path, and Orbitraps, where injected ions are introduced into a charged and rotating spindle and the oscillation frequency of orbiting ions is used to estimate accurate mass. While both QTOFs and Orbitrap instruments have excellent mass accuracy for high-abundance peaks, Orbitraps that provide ultra-high-resolution capabilities (> 120,000) display the greatest sensitivity and resolution for low abundance environmental chemicals, making them the preferred platform for exposome research. Combined with adaptive algorithms for processing complex mass spectral data, it is now possible to detect over 100,000 chemical signals in samples, including low-level environmental pollutants [12,[110][111][112].
The number and types of chemicals detected in PSDs can be expanded by combining complementary separation and ionization approaches for HRMS. These include using alternate chromatography strategies, with LC and GC as the most comprehensive platforms for exposome-wide association studies. LC-HRMS platforms are best suited for measurement of polar molecules with ionizable functional groups, or large, non-polar molecules that include lipids, fatty acids, and sterols. However, many exposome chemicals are volatile enough to be introduced into the gas phase when heated and are not detected by LC-HRMS. Thus, GC-HRMS provides the best sensitivity and selectivity for these compounds [12,113]. Most detected chemicals from wearable silicone PSDs will exhibit some degree of volatility and most exposures are best detected using GC-HRMS [78]. When analyzing silicone PSD extracts, care must be taken to ensure the extracted samples are suitable for the analytical method of choice. All analyses should use a rigorous QA/QC plan, including at least 10% of samples as field blanks, which are non-deployed PSDs that were subjected to similar storage and transportation conditions. Often, these blanks are needed to separate the background from true signals and can be used to filter silicone-related chemicals from the final results.
Following analysis of PSDs, chromatograms can be processed using a number of software tools. Key steps include identification of peaks and integration, deconvolution to identify mass spectra, and alignment of peaks across samples. Both commercial and open-source tools are available; however, algorithms optimized for detection of low abundance peaks are best for exposome research [114][115][116][117]. Deconvolution strategies enhance detection and identification of chemicals, with current approaches based upon peak shape similarity, hierarchical clustering, and correlation across samples [118][119][120][121][122]. By incorporating correlation for deconvolution, these methods are optimized for low abundance peaks that are often characterized by poor peak shape, and will include fragments, isotopes, and adducts from the same compound [123].
Identification of mass spectral signals is one of the key challenges in applying untargeted HRMS. Many detected Fig. 1 Sample total ion chromatograms for A unconditioned silicone wristband analyzed as received from the manufacturer; B silicone wristband conditioned for 18 h at 300 °C maintained at < 0.1 Torr with nitrogen venting at 15,30,45,60,90,120,180,240, 300, and 360 min; C heat conditioned silicone wristband after a 7-day deployment period where the wristband was worn continuously by the study participant ions do not match compounds listed in metabolomic or environmental chemical databases and authentic standards are not available. Computational approaches that assign annotation confidence can enhance prediction of chemical identities. These approaches harness multiple lines of evidence to evaluate the quality of annotation and, combined with appropriate databases, improve the number of annotated compounds [124,125]. Multiple databases exist for exposome research, including the Blood-Exposome database [126] and CECScreen, which includes over 70,000 CECs and predicted metabolites [85,126,127]. The US EPA CompTox Dashboard provides a key resource for identifying detected chemicals [128], with information on 765,000 chemicals and includes in silico predicted electron ionization (GC) and MS/ MS (LC) spectra for all entries [129,130]. For annotating unknown peaks that do not match database entries, numerous tools can be used to characterize ion fragmentation patterns and predict possible identities and biotransformation products of parent metabolites [131,132]. Continued efforts focused on developing new chemical databases that house both environmental chemicals and endogenous metabolites are expected to improve annotation capabilities for untargeted mass spectrometry data in exposome research [133]. Molecular networking of GC-HRMS spectra and MS/MS data from LC-HRMS [134,135] provides an additional strategy for classifying and inferring potential chemical identities, thus enabling insight into related substructures and similar compounds based upon similarity networks among spectra.

Exposomic Data Science
For exposome studies designed to evaluate a disease or other adverse outcomes, signals from untargeted profiling must be prioritized to identify which exposures are driving risk [59]. When applying an exposome-wide association study framework to study relationships between exposures and outcomes, uni-or multivariate data analysis approaches are applied to evaluate the relationship of each detected chemical with the outcome. Because identification of all detected signals is often not possible, variable selection enables prioritization of exposures for identification. Due to the large number of signals detected in exposome studies, traditional data analysis methods are challenged by false positives and robust identification of the top signals defining environmentdisease relationships. There are several sources of error that lead to this issue, including insufficient sample size relative to the number of compounds analyzed, excessive false discovery rate from multiple hypothesis tests, and analyzing each part of known or hypothesized networks individually [136]. An alternative approach is to apply multivariate methods that analyze the entire HRMS dataset jointly. These methods represent the samples as points and determine projections of these points into lower dimensional space, hyperplanes, components, or latent variables, such that a measure of information about the data points is maximized.
Multivariate and data reduction analytic strategies solve two major issues with the traditional exposome-wide association studies by (1) increasing power, since corrections for multiple comparisons are performed on the number of latent features (tens) rather than the number of chemicals (hundreds or thousands), and (2) facilitating determination of networks, since the latent variables are constructed based upon statistical or functional similarity and jointly use information across chemicals. Linear versions of these methods, such as PCA, independent component analysis (ICA), canonical correlation analysis (CCA), linear discriminant analysis (LDA), and partial least squares discriminant analysis (PLS-DA), are popular due to their simplicity of interpretation [137][138][139][140][141][142][143]. Nonlinear methods, such as self-organizing maps, support vector machines, and random forests, are less useful for interpretation but can be more powerful than linear methods for regression or classification [144][145][146]. Continued development of multivariate and dimension reduction techniques for application to exposomic studies is an ongoing area of research, with future application of these methods being expected to reduce complexity of the exposome while improving insight into how chemical mixtures influence health. For further information about multivariate methods used in exposome applications, we refer the reader to the following review articles [147][148][149].

Strategies for Operationalizing Deep Exposome Phenotyping
To realize measurement of the exposome, it is critical to consider exposures across multiple compartments. While most studies use HRMS to characterize the internal exposome using biological samples, personal PSDs provide complementary advantages. First, PSDs are much cheaper to produce and distribute compared with the cost for collecting blood or urine samples. Biologics often require special methods and trained personnel for collection, including clinical visits. These materials must be stored at low temperatures to maintain sample integrity, and different handling and storage procedures can increase variability. PSDs can be provided directly to participants and returned by mail, with limited-to-no contact between study participants and coordinators. This capability is especially important when considering the additional restrictions placed on in-person research due to the COVID-19 pandemic. Long-term, secure storage of biologics can also be costly, as storage in −80 °C is common. In contrast, PSDs can be stored in sealed bags at 4 °C or room temperature, since compounds are stable within the silicone matrix.
Although studies to date have only used silicone PSDs with a small number of participants (average 50 participants; max 255; Table 1), this technology has the potential to provide a key exposome measurement within longitudinal cohort studies. Using heat-based conditioning methods, silicone wristband PSDs can be produced for as little as $5-$10, which is significantly lower than the cost for clinical visits to complete blood or other biofluid collection. The low cost and non-invasive nature of the silicone PSDs allows routine distribution to participants in large cohorts at study enrollment, and additional PSDs can be provided to participants during longitudinal follow-up periods. While cost for analysis by untargeted HRMS can be in the $200-$500 range, longitudinal follow-up can prioritize participant selection based upon health outcomes. Finally, silicone PSDs may provide improved detection and reduced variability for exposures with short biological half-lives. Depending on the compound, time for clearance from the human body can vary on the range of days to decades. When measuring compounds with short biological half-lives in blood or urine, the ability to detect a biomarker is dependent on the time of sample collection. Thus, exposome measurements in biological samples often suffer from high variability for rapidly metabolized compounds [150]. Due to compound stability within the silicone matrix, PSDs eliminate biological transformation and enable detection of the parent compounds averaged over longer time scales [83].
Due to their non-invasive nature, price, and ease of distribution, silicone PSDs are a key technology for measuring the exposome. While quantitative exposure measurements using PSDs are challenging if air-silicone partitioning behavior of analytes is not known, PSDs show considerable potential as a sampler to screen for the presence of both known and unexpected exposures that can be prioritized for further follow-up using traditional exposure assessment methods. Thus, rather than replacing collection of blood, urine, or other biological samples, they provide a complementary measure to assess specific compartments of the external exposome in population studies. For example, ingestion (eating and drinking) is one of the primary routes of environmental exposure and must be assessed using other approaches. Biospecimens also allow measurement of alterations across biological levels and long-term maladaptations, an important consideration for evaluating cumulative effects of environmental exposures. Combined with internal chemical and bioeffect monitoring, the use of silicone PSDs provides a strategy for deep exposome phenotyping in human populations (Fig. 2).
The goal of deep exposome phenotyping is to provide a systematic framework that operationalizes exposomewide association studies of human health by combining the key measures necessary to understand the continuum from exposure to disease. Application in longitudinal cohorts can enable in-depth, comprehensive assessment of exposures, and when combined with untargeted HRMS analysis, provides the chemical coverage necessary for characterizing complex mixtures. Integrating external and internal measures of the exposome with multiple "-omic" layers will allow a functional approach to understanding how environment contributes to disease risk laying a foundation for the mechanisms underlying environment-related diseases [26,27].
Because silicone PSDs are available at low cost, they can be easily incorporated into ongoing longitudinal studies and employed as a tool to estimate temporal changes in exposure patterns through repeated follow-up with new samplers. While the focus to date has been environmental health studies, silicone PSDs also provide a strategy for incorporating the exposome into precision medicine. Environmental factors are widely recognized for their potential to alter treatment efficacy and disease progression [151]. Silicone wristbands and other PSDs can provide a non-invasive means of chemical surveillance, helping identify patients for Fig. 2 To better understand the human exposome, there is a need to measure exposures across both the external and internal exposome. Combining silicone PSDs, biological samples, and untargeted HRMS provides a unified strategy for deep exposome phenotyping that enables systematical measures of environmental exposures and corresponding biological exposures. While most efforts to date have focused on the internal exposome, silicone PSDs are low cost, noninvasive, easy to distribute, and allow measurement of compounds with short biological half-lives. Application of silicone PSDs within longitudinal studies will improve measurement of exposures at different life stages and provides the chemical coverage necessary for characterizing complex mixtures. Integrating external and internal measures of the exposome with other omic layers will allow a functional approach to understanding how environment contributes to disease risk, laying a foundation for the mechanisms underlying environmentrelated diseases primary intervention or participants who would benefit from increased follow-up.

Conclusions
While environment is one of the main drivers of disease risk, the ability to measure the complexity of the exposome is limited by its temporal nature, availability of samples, and the technology to detect complex exposures patterns. While considerable advances have been made in analytical strategies for the internal exposome, comparable methods for the external compartment are not well-developed. Silicone wristbands and other PSDs, which can be combined with untargeted HRMS platforms to characterize the exposome, are a natural way to integrate measures of the external exposome into longitudinal studies. These devices are cheap, non-invasive, and can be easily distributed. Previous studies demonstrate their suitability for many environmental chemical exposures, which is critical for success in exposome applications. By using untargeted approaches, it is possible to detect and identify ongoing exposures that may have not been expected or characterized, supporting pollution control and identification of the primary chemical exposures experienced by humans. Thus, continued development and application of silicone PSDs will facilitate greater understanding of how environmental exposures drive disease risk, while providing a feasible strategy for incorporating untargeted, high-resolution characterization of the external exposome in human studies.
Funding This work was supported by funds received from the National Institute of Environmental Health Sciences (award numbers P30 ES023515 and U2C ES030859), National Cancer Institute (award number UG3 CA265846), and award number 874627 from the European Commission. Funding sources did not direct the study.

Compliance with Ethical Standards
Conflict of Interest None to declare.

Human and Animal Rights and Informed Consent
This article does not contain any studies with human or animal subjects performed by any of the authors.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http:// creat iveco mmons. org/ licen ses/ by/4. 0/.