Microbial pectinases: an ecofriendly tool of nature for industries

Pectinases are the growing enzymes of biotechnological sector, showing gradual increase in their market. They hold a leading position among the commercially produced industrial enzymes. These enzymes are ecofriendly tool of nature that are being used extensively in various industries like wine industry; food industry; paper industry for bleaching of pulp and waste paper recycling; in the processing of fruit–vegetables, tea–coffee, animal feed; extraction of vegetable oil and scouring of plant fibres. Moreover, enzymatic catalysis is preferred over other chemical methods, since it is more specific, less aggressive and saves energy. This is the review which covers the information available on the applicability potential of this group of enzymes in various sectors.


Introduction
The primary source of industrial enzymes is microorganisms, out of which, 50 % originate from fungi and yeast, 35 % from bacteria, while the remaining 15 % are either of plant or animal origin (Anisa and Girish 2014). The pectinases are being produced by various kinds of microorganisms (Servili et al. 1992;Kapoor et al. 2001;Angayarkanni et al. 2002;Hoondal et al. 2002;Sharma and Satyanarayana 2012;Sharma et al. 2013b;Mohamadi et al. 2014). They are also reported to be produced in combination with other industrially important enzymes by the same microbial isolate (Kaur et al. 2011;Singh et al. 2015). The pectinase enzyme is broadly classified into three types on the basis of their mode of action: pectin esterase, hydrolases and lyases. Pectin esterase catalyses the de-esterification of the methoxyl group of pectin, forming pectic acid. Hydrolases (Polygalacturonases and Polymethylgalacturonases)-Catalyses the hydrolytic cleavage of a-1,4-glycosidic linkage in pectic acid and pectin, respectively, while Lyases (Polygalacturonate Lyase and Polymethylgalacturonate Lyase)-Catalyses the cleavage of a-1,4-glycosidic linkage in pectic acid and pectin, respectively by trans-elimination reaction and forming unsaturated galacturonates and methyl galacturonates, respectively. The Classification of Pectinases, their mode of action and products formed are shown in Table 1 and Fig. 1, respectively. Pectinases can be produced by both submerged and solid state fermentation (SSF). Optimised conditions for pectinase production by various microorganisms have been shown in Table 2.

Industrial applications
The first commercial application of pectinases was reported in 1930 by Kertesz for the clarification of apple juice. List of companies producing commercial pectinases is given in Table 3. The application aspect of pectinases has been discussed under the following heads (Fig. 2).

Fruits and vegetables processing
A general practice in fruit and vegetable processing is the treatment of pulp with appropriate enzyme preparations (Naidu and Panda 1998;Ramadan et al. 2007;Chaudhri and Suneetha 2012;Khan et al. 2013). Juices with low viscosity, high clarity and high in nutrition are more desirable by consumers.
In citrus juice processing, pectic enzymes contribute in the removal of cloudiness and stabilisation of juice (Braddock 1981). Pectinolytic enzymes have also been applied in association with other cell wall degrading enzymes such as cellulases and hemicellulases (Bhat 2000). Croaka and Corredig (2006) reported the changes occurring to orange juice cloud particles after addition of polygalacturonase and pectin esterase. The addition of polygalacturonase showed no effect on the particle size of juice cloud, while the addition of pectin esterase causes the aggregation of the cloud particles within a few minutes at the natural pH (3.8) of the juice, and the amount of enzyme added, affected the kinetics of the aggregation.
As the banana and papaya are soft fruits and contain high level of soluble pectin, maceration of these fruits resulted in semigelled mass that was very difficult to press (Pilnik and Voragen 1993). Use of pectinase enzyme resulted in pulp with better pressing characteristics and higher juice yield. Crushing and macerating papaya and banana by enzymatic treatment resulted in extraction of 60 to 95 ml juice per 100 g of material, which is about threeto-four fold more as compared to the control. Soares and coworkers (2001) reported that the yield of fruit (pear, guava, banana, papaya) and vegetable (carrot, beet) juice was improved significantly by pectinase treatment and the material was pressed more easily than the control and the residual dry weight of solid residues decreased in the range from 5 to 64 %. The yield obtained from milling carrots treated with enzyme solution from Bacillus Ar1.2, Ega16 and Ega22 strains was 40-50 ml juice per 100 g of material, i.e., two-fold higher than the control (20 ml/100 g).
About 25 % increase in pineapple juice recovery was obtained, when a mixture of two commercial enzymes pectinase and hemicellulase was used at the extraction temperature of 40°C against control (Tochi et al. 2009). The use of pectinase and hemicellulase preparations in Fig. 1 Mode of action and products of pectinases (Lang and Dornenburg 2000). Mode of action of pectinases: a R=H for PG (Polygalacturonases) and CH 3 for PMG (Polymethylgalacturonases), b PE (Pectin esterase), c R=H for PGL (Polygalacturonate lyase) and CH 3 for PL (Pectin lyase). The arrow indicates the mode of action of different forms of pectinases. Products of pectinases: a Saturated galacturonic acid formed by PG and Saturated methoxylated galacturonide by PMG, b Pectic acid formed by PE, c Unsaturated galacturonic acid formed by PGL and unsaturated methoxylated galacturonide by PL pineapple pulp not only increased the juice recovery but also ensured the highest possible quality of the end products (Kilara 1982;Kashyap et al. 2001a). Increased juice yield is mainly due to the ability of enzymes to degrade the cell walls, thus significantly lowers the viscosity of the recovered juices and hence minimises membrane fouling during filtration operations (de Carvalho et al. 2008;Chaudhri and Suneetha 2012).
Pectinase treatment also resulted in about 143 % more transmittance and 35.5 % drop in viscosity as compared to control, in case of apple juice. Enzymatically clarified juices did not show any significant haze development, when stored at room temperature (*25°C) after 2 months of storage. Singh and Gupta (2004) also reported the effect of gelatin on the efficacy of pectinolytic enzyme from Aspergillus niger for clarification of apple juice. Apple juice, when treated with 15 IU/ml of enzyme in presence of 0.01 % gelatin, was about 1.5-2 times more clarified as compared to control containing only enzyme, at 45°C with holding time of 6 h. Extraction by enzymatic maceration can increase the yield by more than 90 % as compared to conventional mechanical juicing, and also improves the organoleptic, nutritional properties and filtration efficiency (Rombouts et al. 1980). The partially purified pectinase from Bacillus VIT sun-2 in combination with commercial cellulase and xylanase has more efficacy in increasing the yield and clarification of apple juice followed by grape, orange and pomegranate juice and its effect increases with increase in incubation time and enzyme concentration (Praveen and Suneetha 2015). Pomace liquefaction may also be used to obtain value-added foods, as it offers the opportunity of releasing apple polyphenols and polysaccharides to a greater extent. When the apple juice is ultrafiltered, the permeate flux of depectinized juice is much higher than pectinized juice. The reduction in apple juice viscosity and total pectin content resulted in increase of permeation rate. The treatment of fruit with pectinase helps in the release of phenolic content from the fruit skin (Sharma et al. 2013a). These phenolic components play a significant contributory role as an antioxidant and this is important in the maintenance of health and protection from coronary heart disease and certain cancers (Miller and Rice-Evans 1997). Phenolics content was higher up to 15 % in the enzyme treated samples which suggest that dragon fruit beverage is rich in antioxidant capacity than the unprocessed beverage (Aliaa et al. 2010).
Some reports are available on the simultaneous use of ultrasound and pectinase (Lieu and Le 2010;Dang et al. 2012). Yield of juice was more in case of acerola and grape mashes, when treated with ultrasound and pectinase simultaneously as compared to either ultrasonic or enzymatic treatments (Lieu and Le 2010;Dang et al. 2012). The maximum extraction yield in acerola mash, when treated with pectinase at the concentration of 0.12 % v/w for 26.3 min in the presence of ultrasound was 87.4 % which is 3.2 and 15.5 % higher than by the ultrasonic and enzymatic treatment, respectively (Dang et al. 2012). It can be explained that, ultrasound generates collapsing cavitational bubbles, the energy of which provides greater penetration of the solvent into the cellular material and enhances mass transfer to and from interfaces; in addition, acoustic cavitation can disrupt the cell walls and release the cellular materials which in turn cause increase in extraction yield (Patist and Bates 2008).

Wine processing
The main functions of pectinolytic enzymes in the wine making process are to support the extraction process, maximise juice yield, facilitate filtration and intensify the flavour and colour (Chaudhri and Suneetha 2012). Enzymatically treated wines showed more stability with reduced filtration time in comparison to control wines (Blunt 2000;Jayani et al. 2005). Treatment of macerated fruits with pectinolytic enzymes, before the addition of inoculum resulted in improved characteristics of wine (Revilla and Ganzalez-san 2003;Praveen and Suneetha 2014). Clarification of must prior to the onset of alcoholic fermentation also improves the sensory characteristics of white wine (Reddy and Reddy 2009). Bosso (1993) reported the higher  Fig. 2 Applications of pectinases in various industries levels of alcohol production in fermented grape must, pretreated with pectolytic enzymes and observed increase in iso-amyl alcohol and 2-phenyl ethanol and a decrease in n-propanol concentrations. Reddy and Reddy (2009) studied the combined effect of pectinase treatment and fermentation by yeast cultures on ethanol production. Pectinase treatment increased the yield of juice, when treated at 0.6 % of enzyme concentration and fermentation was conducted at 30°C and pH 4.5 for a period of 12 h. The increase in ethanol may be due to the clarification of mango must and increased sugar concentration in pectinase treated samples.
Various reports have shown that, the addition of pectinolytic enzymes in the wine making process leads to increased levels of methanol in wine due to the activity of pectin esterase (Servili et al. 1992;Revilla and González-SanJosé 1998). Methanol is toxic and its maximum concentration in wine should be regulated. Therefore, pectin esterase should be at low concentrations in commercial mixtures.

Saccharification of agricultural substrates
Pectinases are also being used in biorefineries for hydrolyzing pectin present in pectin-rich agro-industrial wastes (Biz et al. 2014). These wastes are processed into simple sugars so that they could be converted into bioethanol or used as fermentable sugars (Collares et al. 2012;Hossain et al. 2011). Different enzymes such as pectinase, hemicellulases and cellulases are being used to convert polysaccharides present in the plant cell wall into simple sugars (Beldman et al. 1984). Treatment of Landoltia punctata (duckweed) with a pectinase dose of 26.54 pectin transeliminase unit/g mash at 45°C for 5 h resulted in about 142 % increase in glucose as compared to the untreated mash. This glucose is further used in the production of 30.8 ± 0.8 g/L ethanol concentration using duckweed as the feedstock (Chen et al. 2012).

Extraction of vegetable oil
Vegetable oils of olive, sunflower, coconut, palm or canola are obtained by extraction with organic solvents such as hexane, which is a potential carcinogen (Kashyap et al. 2001a). The use of pectolytic enzymes, in this case preferably alkaline, allows the extraction of vegetable oils in an aqueous process by degradation of cell wall components. Now days, the use of enzyme preparations containing cellulases, hemicellulases and pectinases has begun for maximum extraction of oil. Enzymatic treatment resulted not only in increase of oil yield but also increased the polyphenolic and vitamin E content, thereby also enhanced its organoleptic quality (Kashyap et al. 2001a;Hoondal et al. 2002;Iconomou et al. 2010).

Processing of textile material
The conventional scouring process involves the use of harsh chemicals and is slowly being replaced with the ecofriendly approach by using enzymes. Bio-scouring is an ecofriendly method for removal of non-cellulosic impurities from the fiber with specific enzymes (Praveen and Suneetha 2014). It makes the fibre surface more hydrophilic (Li and Hardin 1998). Bioscouring also avoids high energy consumption and severe pollution problems that are associated with conventional alkaline scouring (Rajendran et al. 2011). Pectinases also prevent fiber damage (Jayani et al. 2005;Klug-Santner et al. 2006). Alkaline pectinase has been considered as the most suitable enzyme for cotton scouring by many researchers, because the degradation and elimination of pectin facilitates the removal of loosened waxes (Tzanov et al. 2001;Wang et al. 2007). Whereas some scientists have also studied the effect of acidic and neutral pectinase on the cotton bioscouring (Pusic et al. 2015). Improved results were achieved, when pectinase have been used in conjunction with amylases, lipases, cellulases and hemicellulases to remove sizing agents from cotton in a safe and ecofriendly manner, replacing toxic caustic soda used for the purpose earlier (Li and Hardin 1998;Wang et al. 2007;Agrawal et al. 2008a). Lipase in combination with pectinase resulted in the significant reduction of the time required for bioscouring and cotton fabrics with superior properties and excellent dyeing performance were obtained (Kalantzi et al. 2010). Karapinar and Sariisik (2004) reported that, during the bioscouring of cotton with different enzyme combinations, adequate wettability and absorbancy was achieved with cellulase ? pectinase and cellulase ? pectinase ? protease than other enzyme combinations. Klug-Santner and coworkers (2006) reported nearly 80 % removal of pectin from the outer layer of cotton using pectate lyase from Bacillus pumilus BK2. While working on bioscouring of cotton fabric with pectinase isolated from Fusarium sp., Rajendran and coworkers (2011) found that, the weight of the fabric was reduced up to 0.89 % in comparison with the 4.9 % reduction in weight of the fabric by conventional alkaline scouring. Water absorbing character and tensile strength of the bioscoured fabric was higher than that of conventionally scoured fabric. Vigneswaran and coworkers (2012) reported that, treatment of cotton with alkaline pectinase resulted in water absorbency of \5 s, 52.5 % wax removal and 3.2 % fabric weight loss under optimised conditions ( Table 4). Addition of chelating (EDTA) and wetting agent along with pectinase from Bacillus subtilis markedly enhanced the weight loss in cotton. Bioscouring of fabric with pectinase resulted in enhancement of various physical properties of fabric viz. whiteness (1.2 %), tensile strength (1.6 %) and tearness (3.0 %) over conventionally alkaline scoured fabrics (Ahlawat et al. 2009). Hartzell and Durrant (2000) studied the effect of agitation on cotton bioscouring by pectinase, and concluded that agitation during scouring improves the fabric wettability. Li and Hardin (1998) studied the effect of surfactants, agitation, and enzyme type, and concluded that, the effect of surfactant and agitation depends on the enzyme structure and the characteristics of cotton fibre. Agrawal and coworkers (2008b) reported the additive effect of F. solani pisi cutinase and pectate lyase in cotton bioscouring. Time required for the removal of wax was reduced, when the cutinase (Cutinase 100 U/g of fabric, 30°C, 50 mM Tris-HCl buffer pH 8, Triton X-100 1 g/L) followed by pectinase (Pectinase 13 U/g of fabric, 50°C, 50 mM Tris-HCl buffer, pH 8) treatment was used. Study showed that cutinase and pectinase can also be applied effectively together in one reactor vessel.
Naturally occurring fibres such as cotton, jute, coir, flax, hemp, ramie and banana are used as raw material for the textile industry (Esfandiari 2007;Kalantzi et al. 2010). The technical feasibility of enzymatic scouring for different fabrics has been recognised by many researchers over the last decade (Tzanov et al. 2001;Lenting et al. 2002;Lu 2005;Moghe and Nabar 2006). The optimised conditions for the treatment of various fibres by pectinolytic enzymes have been represented in Table 4. In addition to pectin, partial removal of the non-fibrous materials like hemicelluloses makes the jute fibre considerably softer. As xylan is a major component of hemicelluloses, so xylanase enzyme is basically used in addition to pectinase. This enzyme allows the selective removal of hemicellulose without affecting the strength of the cellulosic fibre itself. Pectinolytic microorganisms having xylanase activity but devoid of cellulase activity is an additional beneficial aspect to improve the fibre quality of jute (Gomes et al. 1992). Yadav and coworkers (2009) are the first to report the enzymatic retting of hemp and flax using pectin lyase from Aspergillus terricola ( Table 4). Retting of Latvian hemp sort ''Purini'' by using pectinase enzyme has been reported by Bernava, (2015). For the manufacture of textiles from ramie fibres, a gum content of \6 % is desired (Bhattacharya and Paul 1976). Decorticated ramie fibres contain about 20-30 % incrusting material consisting mainly of pectin and hemicellulose. Bruhlmann et al. (1994) reported that, the gum content of fresh fibres can be reduced to 15 % when treated with pectinolytic enzyme isolated from Amycolata sp. for 15 h. Incubation of ramie fibres with the alkalophilic bacteria, Bacillus sp. NT-39, NT-53 and NT-76 resulted in 5.0 % or more loss in the gum content after 48 h, while polysaccharide-degrading enzymes (pectate lyase, polygalacturonase, xylanase and cellulase) from these strains decreased the gum content to 9.4 % after 5 h. Analysis of gum content and enzyme  Amycolata sp. Bruhlmann et al. (1994) activities revealed that, pectate lyase and xylanase played an important role in the degradation of residual gum. Guo and coworkers (2013) are the first to report the combined effect of enzymatic degumming and H 2 O 2 bleaching process on ramie fibre. The gum loss and brightness of fibres could be significantly improved, when H 2 O 2 and pectate lyase from Bacillus sp. Y1 were used in combination for degumming. Treatment of ramie and sunn hemp fibre with combination of polygalacturonase and chemical treatment resulted in release of 9.4 and 7.6 lmol/ml of reducing sugar from ramie and sunn hemp fibre, respectively, whereas reduction in the weight was 37 and 56 %, respectively, after 11 h incubation (Kapoor et al. 2001). Sharma and Satyanarayana (2012) reported that the treatment of ramie fibres with NaOH (0.04 %) followed by the pectinase (300 U/g dry fibre) from B. pumilus dcsr1 resulted in the reduction of brittleness, redness, yellowness, and increase in the tensile strength, Young's Modulus and brightness of the fibre. Combination of chemical and enzymatic process enhances the degumming of bast fibres and decreases the consumption of chemicals and energy (Deshpande and Gurucharanam 1985;Kashyap et al. 2001b). Chemical plus enzymatic process resulted in the release of 575 lmol of galacturonic acid g -1 dry fibres after 18 h of treatment (Kashyap et al. 2001b).

Tea and coffee processing
Pectinase treatment accelerates tea fermentation by breaking down the pectin which is present in the cell walls of tea leaves and also destroys the foam forming property of instant tea powders by destroying the pectins. The change in colour of tea during the fermentation also results in the development of characteristic aroma (Carr 1985;Praveen and Suneetha 2014). Application of cellulase, pectinase and xylanase, isolated from a yeast Pichia sp. NRRL Y-4810 and Zygosaccharomyces sp. NRRL Y-4882 and the bacterium Acetobacter sp. NRRL B-2357, respectively increased the black tea components, theaflavin (TF), thearubigen (TR), caffeine (CAF), high polymerised substances (HPS), total liquor colour (TLC), total soluble solids (TSS) and dry matter content (DMC) over conventional treatment . Marimuthu et al. (1997) reported that use of commercial pectinase and cellulase improves tea quality by increasing 24.77 % TF, 21.52 % TR, 21.54 % HPS and 17.49 % TSS. They have also reported that commercially available pectinase, when used for tea leaf fermentation could increase TF by 5.8 %, TR by 5.72 %, HPS by 4.96 % and TSS by 9.29 % . Crude enzyme from Aspergillus sp. at low concentration (2.5 IU/750 g tea leaf) was more effective in improving the quality of tea than the purified pectinase enzyme at higher concentration (25 IU/750 g tea leaf). This is due to the fact that, the crude enzymes preparation extracted from fungi contains all enzymes, cellulase, hemicellulase, pectinase, proteinase, etc., whereas the purified enzyme preparation contains only pectinase. The crude enzyme from A. indicus, A. falvus and A niveus increase the TF content by 43.81, 62.86 and 59.05 %, respectively, whereas the purified enzyme from these fungi increased the TF content by 38.10,40 and 34.29 %,respectively. The TLC was enhanced to 18.19,14.74 and 14.10 % by the crude enzyme from A. indicus, A. falvus and A. niveus, respectively, whereas the purified enzyme from these fungi resulted in an increase of TLC by 12.18, 11.54 and 11.22 %, respectively (Angayarkanni et al. 2002). Senthilkumar and coworkers (2000) reported that, mixed enzyme extract from A. oryzae, A. wentii, A. tamari, A. japonicus, A. awamori and Trichoderma koningii enhanced the tea quality by increasing TF by 45 %, TR by 48 %, HPS by 33 %, TLC by 19 % and TSS by 3 %.
Pectinolytic microorganisms are also used in the fermentation of coffee to remove the mucilaginous coat from the coffee beans. The robusta coffee mucilage layer is gelatinous and viscous in nature, which is surrounded over the bean. It contains 84 % moisture with 8.9 % protein, 4 % sugars, 2.8 % pectin and 0.9 % ash (Murthy and Naidu 2011). The mucilage constitutes about 17 % by mass of the whole cherries. The composition of the robusta coffee pulp could vary depending upon the variety, geographical conditions, management of the estate, etc. (Murthy and Naidu 2011). Degradation of mucilage to sugars contributes to the quality of coffee bean. Pectinases are added to remove the pulpy bean layer consisting of pectic substances. Pectinolysis enabled reduction in demucilisation time which was evident with reduction in pH value and increased sugar release (Murthy and Naidu 2011). Pectinase was produced using coffee pulp and the application of the same was studied on demucilage of coffee pulp, which indicates waste recycle with value addition, that is also economical for coffee industry (Murthy and Naidu 2011). Murthy and Naidu (2011) reported that, crude pectinase from Aspergillus niger CFR causes about 54 and 71 % degradation of mucilaginous layer of coffee beans after 1 and 2 h of fermentation process, respectively and complete decomposition of pectin was obtained after 3.5 h.

Processing of animal feed
The use of pectinases in production of ruminant feed decreases the feed viscosity and increases the absorption of nutrients by ruminants, liberates nutrients by enzymatic action which also reduces the amount of faeces (Hoondal et al. 2002;Praveen and Suneetha 2014). The specific enzyme preparations have become a valuable tool for economically improving the digestive processes in the ruminants (Gado et al. 2009;Murad et al. 2009). Ruminants diet was supplemented by cocktail of enzymes containing xylanases, pectinases and cellulases. Supplementation of enzymes increases the digestibility of organic matter (Selinger et al. 1996;Petersen 2001). Improvement in animal performance due to the use of enzyme additives can be attributed mainly to improvement in ruminal fibre digestion, which results in increased digestible energy intake (Arambel et al. 1987;Ghorai et al. 2009). The net effect of enzyme usage in feed has increased the animal weight. Treatment of feed by spraying enzymes just before feeding provides increased management flexibility. Feed treatment with enzymes in this manner may improve digestibility of the feed via a number of different mechanisms including direct hydrolysis, improvements in palatability, changes in gut viscosity (Ghorai et al. 2009).

Biobleaching of kraft pulp
With the advancement of biotechnology and increased reliance of paper and pulp industries on the use of enzymes for biobleaching, the use of enzymes like xylanases, ligninases, mannanase and pectinases is increasing in the paper and pulp industries (Kirk and Jefferies 1996;Bajpai 1999). The presence of pectins weakens dewatering during sheet formation due to their high cationic demand and cause yellowness of paper. The pectinases depolymerize polygalacturonic acids and thus decreases the cationic demand in the filtrate from peroxide bleaching of thermo-mechanical pulp (Viikari et al. 2001). Pectinases solely and in combination with other enzymes produced by same or by different microorganisms have been efficiently used for biobleaching of mixed hardwood and bamboo kraft pulps (Ahlawat et al. 2007(Ahlawat et al. , 2008Dhiman et al. 2009;Kaur et al. 2010). The enzyme aided bleaching results in less requirement of bleaching chemicals to attain the same extent of brightness of the pulp as obtained by conventional chemical bleaching and also enhances the physical properties of paper sheet. Reduction in bleaching chemicals would result in reduction of organochlorine compounds in the effluent.
Reduction by 1.2 units in kappa number has been reported by the use of xylanase and pectinase in combination produced from Bacillus pumilus and Bacillus subtilis, respectively (Ahlawat et al. 2007). Ahlawat et al. (2008) reported the reduction in pulp kappa number and permanganate number by 5.85 and 6.1 %, respectively, after enzymatic treatment of the mixed hardwood and bamboo kraft pulp with pectinase from Bacillus subtilis SS. Dhiman et al. (2009) reported 20 % less chlorine consumption after treatment of kraft pulp with xylanase and pectinase in combination produced by different Bacillus species. Kaur et al. (2010) also reported that, use of xylanopectinolytic enzymes extracted from Bacillus pumilus resulted in 25 % less chlorine consumption to obtain the same optical properties of the pulp as obtained by conventional chemical bleaching. The synergistic action of xylanase and pectinase which degrades the xylan and pectin present in the pulp fibre and boost up the access of the bleaching chemicals to the lignin present in the pulp by opening up the pulp structure.

Recycling of wastepaper
Current deinking process depends upon the use of large amount of environment damaging chemicals. Deinking using enzymes is less polluting, energy saving, gives better performance to achieve the desired deinked pulp properties and results in lower disposal problems. Enzymes being used in deinking process are pectinases, hemicellulases, cellulases and lignolytic enzymes. Enzymatic deinking alters bonds near the ink particle and removes the ink from fibre surface. The released ink is then removed by washing or floatation Pathak et al. 2010;Xu et al. 2011). A combination of xylanase and pectinase has been used for deinking of school waste paper ). Use of enzymes in deinking results in lower BOD and COD values, thus reduce the cost of waste water treatment in an environment friendly manner (Bajpai and Bajpai 1998;).

Conclusions
Microbial pectinases are the leading enzyme of the industrial sector. They are being used extensively for various industrial applications and new applications are still coming up. But the main consideration is of enzyme titre and/or stability of the enzyme to make the process cost effective. Production of pectinases has been reported by many workers and cost-effective substrates have also been used but still the production cost is high either due to low activity or instability of enzyme at high temperature for longer duration. So, storage of enzyme at low temperature further increases its cost for industrial application.
The potency of the strain can be increased by enzyme engineering techniques. Enzyme producing companies constantly improve the potency of industrially valuable enzymes producing strains through mutagenesis. Efforts should be made to enhance the activity of enzymes using enzyme engineering approaches. During enzymatic treatment, process is done at particular temperature range and to maintain that range makes the process expensive. Therefore, to reduce the cost of industrial processes, it becomes necessary to use thermostable enzymes. Stability of enzyme over wide range of temperature and pH gives additional advantage to the strain. Further research should be concentrated in increasing the stability of enzyme over wide range of pH and temperature.
So, new microbes with high extracellular pectinase activity, stability over wide range of temperature and pH for a longer period of time, along with their cost-effective production have been the focus of recent research. Immobilisation and reimmobilisation of pectinases onto cost-effective material can have great potential in the clarification of beverages for making the process more cost-effective, so further research should be concentrated in this area also so as to reduce the cost of the enzyme for their efficient use. More research is also needed to discover strains, producing pectinase in combination with other enzymes and the specific combination is required for particular application. This will drastically decrease the production cost for particular application.