Abstract
Weld arc additive remanufacturing technology is a very effective method to repair invalid molds. In this paper, taking crankshaft trimming die as an example, the manufacturing process of hot forging die is studied. Firstly, the path strategy of contour offset is proposed according to the characteristics of the die. Then, based on the reverse reconstruction technology, the three-dimensional model of the failure mold is established. By adjusting the posture of the welding gun, the weld bead cladding without support is realized. In order to improve the performance of the die, two different materials are used to achieve the purpose of gradient change. Finally, through the repair experiment of the crankshaft trimming die and the analysis of the material properties, the feasibility of the process and material is verified.
Similar content being viewed by others
References
Singh S, Sharma S K, and Rathod D W, Mater Today: Proc 47 (2021) 6564. https://doi.org/10.1016/J.MATPR.2021.02.632
Çam G, Mater Today: Proc 62 (2022) 77. https://doi.org/10.1016/J.MATPR.2022.02.137
Buchanan C, and Gardner L, Eng Struct 180 (2019) 332. https://doi.org/10.1016/j.engstruct.2018.11.045
Dirk H, Vanessa S, Eric W, and Claus E, Acta Mater 117 (2016) 371. https://doi.org/10.1016/j.actamat.2016.07.019
Ewald A, and Schlattmann J, J Laser Appl 30 (2018) 032309. https://doi.org/10.2351/1.5040612
Volker S, and Maria R B, Laser Technology in Biomimetics, Springer, Berlin, Heidelberg (2014).
Costanza C, Gerwin S, and Paul B, Addit Manuf 27 (2019) 461. https://doi.org/10.1016/j.addma.2019.03.015
Jörn M, Ding J L, Helen L, and Panos K, Int J Product Dev 19 (2014) 2. https://doi.org/10.1504/IJPD.2014.060028
Zhang Y, Chen Y, Li P, and Alan T M, J Mater Process Tech 135 (2003) 347. https://doi.org/10.1016/S0924-0136(02)00867-1
Ding D H, Pan Z X, Dominic C, and Li H J, Robot Comput Integr Manuf 34 (2015) 8. https://doi.org/10.1016/j.rcim.2015.01.003
Ma Y, Dominic C, Nicholas H, Li H J, and Pan Z X, Mater Sci Eng A 631 (2015) 230. https://doi.org/10.1016/j.msea.2015.02.051
Ding J, Colegrove P, Mehnen J, Williams S, and Almeida P S, Int J Adv Manuf Technol 70 (2014) 227. https://doi.org/10.1007/s00170-013-5261-x
Ding DH, Pan ZX, Dominic C and Li HJ, Process planning for robotic wire and arc additive manufacturing, in 2015 IEEE 10th Conference on Industrial Electronics and Applications (ICIEA), pp 2000–2003, doi.org/https://doi.org/10.1109/ICIEA.2015.7334441 (2015)
Oliveira J P, Gouveia F M, and Santos T G, Addit Manuf Lett (2022). https://doi.org/10.1016/J.ADDLET.2022.100032
Podgrajsek M, Glodez S, and Ren Z, Surf Coat Technol 276 (2015) 521. https://doi.org/10.1016/j.surfcoat.2015.06.021
Zhang J S, Zhou J, Tao Y P, Shen L, and Li M Y, Int J Adv Manuf Technol 80 (2015) 1807. https://doi.org/10.1007/s00170-015-7170-7
Gârleanu D, Borda C, Gârleanu G, Modrogan C, and Dascălu L C, Metals 11 (2021) 1157. https://doi.org/10.3390/MET11081157
Cha S H, Nam J D, Ahn M S, Seo P K, and Kim B M, Adv Mater Process Technol 2 (2016) 401. https://doi.org/10.1080/2374068X.2015.1121034
Chen C R, Wang Y, Ou H G, He Y, and Tang X Z, J Clean Prod 64 (2014) 13. https://doi.org/10.1016/j.jclepro.2013.09.014
Jhavar S, Paul C P, and Jain N K, Eng Fail Anal 34 (2013) 519. https://doi.org/10.1016/j.engfailanal.2013.09.006
Barrau O, Boher C, Gras R, and Rezai A E, Wear 255 (2003) 1444. https://doi.org/10.1016/S0043-1648(03)00280-1
Shi J P, He B L, Yu Y X, and Liu J, Adv Mater Res 1165 (2011) 834. https://doi.org/10.4028/www.scientific.net/AMR.189-193.834
Bennett J L, Garcia D J, Kendrick M, Hartman T, and Cao J, J Manuf Sci Eng 141 (2019) 2. https://doi.org/10.1115/1.4042078
Liu D S, Liu R P, Wei Y H, and Pan P, Mater Manuf Process 28 (2013) 643. https://doi.org/10.1080/10426914.2012.727117
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Liu, S., Wei, Y., Li, Z. et al. Research on Repairing Edge of Trimming Die with Arc Welding Robot. Trans Indian Inst Met 76, 1573–1581 (2023). https://doi.org/10.1007/s12666-022-02832-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12666-022-02832-x