Skip to main content

Advertisement

SpringerLink
Log in

Process and challenges of stainless steel based bipolar plates for proton exchange membrane fuel cells

  • Invited Review
  • Published:
International Journal of Minerals, Metallurgy and Materials Aims and scope Submit manuscript

Abstract

Proton exchange membrane fuel cell (PEMFC) powered automobiles have been recognized to be the ultimate solution to replace traditional fuel automobiles because of their advantages of PEMFCs such as no pollution, low temperature start-up, high energy density, and low noise. As one of the core components, the bipolar plates (BPs) play an important role in the PEMFC stack. Traditional graphite BPs and composite BPs have been criticized for their shortcomings such as low strength, high brittleness, and high processing cost. In contrast, stainless steel BPs (SSBPs) have recently attracted much attention of domestic and foreign researchers because of their excellent comprehensive performance, low cost, and diverse options for automobile applications. However, the SSBPs are prone to corrosion and passivation in the PEMFC working environment, which lead to reduced output power or premature failure. This review is aimed to summarize the corrosion and passivation mechanisms, characterizations and evaluation, and the surface modification technologies in the current SSBPs research. The non-coating and coating technical routes of SSBPs are demonstrated, such as substrate component regulation, thermal nitriding, electroplating, ion plating, chemical vapor deposition, and physical vapor deposition, etc. Alternative coating materials for SSBPs are metal coatings, metal nitride coatings, conductive polymer coatings, and polymer/carbon coatings, etc. Both the surface modification technologies can solve the corrosion resistance problem of stainless steel without affecting the contact resistance, however still facing restraints such as long-time stability, feasibility of low-cost, and mass production process. This paper is believed to enrich the knowledge of high-performance and long-life BPs applied for PEMFC automobiles.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Y. Wang, H. Yuan, A. Martinez, P. Hong, H. Xu, and F.R. Bockmiller, Polymer electrolyte membrane fuel cell and hydrogen station networks for automobiles: Status, technology, and perspectives, Adv. Appl. Energy, 2(2021), art. No. 100011.

  2. J. Rodríguez-Varela, I.L. Alonso-Lemus, O. Savadogo, and K. Palaniswamy, Overview: Current trends in green electrochemical energy conversion and storage, J. Mater. Res., 36(2021), No. 20, p. 4071.

    Article  CAS  Google Scholar 

  3. Y. Luo, Y.H. Wu, B. Li, T.D. Mo, Y. Li, S.P. Feng, J.K. Qu, and P.K. Chu, Development and application of fuel cells in the automobile industry, J. Energy Storage, 42(2021), art. No. 103124.

  4. M.K. Debe, Electrocatalyst approaches and challenges for automotive fuel cells, Nature, 486(2012), No. 7401, p. 43.

    Article  CAS  Google Scholar 

  5. V. Mazumder, Y. Lee, and S.H. Sun, Recent development of active nanoparticle catalysts for fuel cell reactions, Adv. Funct. Mater., 20(2010), No. 8, p. 1224.

    Article  CAS  Google Scholar 

  6. B. Smitha, S. Sridhar, and A.A. Khan, Solid polymer electrolyte membranes for fuel cell applications—A review, J. Membr. Sci., 259(2005), No. 1–2, p. 10.

    Article  CAS  Google Scholar 

  7. S.D. Wu, W.M. Yang, H. Yan, X.H. Zuo, Z.B. Cao, H.Y. Li, M.N. Shi, and H.B. Chen, A review of modified metal bipolar plates for proton exchange membrane fuel cells, Int. J. Hydrogen Energy, 46(2021), No. 12, p. 8672.

    Article  CAS  Google Scholar 

  8. J. Bi, J.M. Yang, X.X. Liu, D.D. Wang, Z.Y. Yang, G.Y. Liu, and X.D. Wang, Development and evaluation of nitride coated titanium bipolar plates for PEM fuel cells, Int. J. Hydrogen Energy, 46(2021), No. 1, p. 1144.

    Article  CAS  Google Scholar 

  9. T. Stein and Y. Ein-Eli, Challenges and perspectives of metal-based proton exchange membrane’s bipolar plates: Exploring durability and longevity, Energy Technol., 8(2020), No. 6, art. No. 2000007.

  10. R. Stroebel, DOE Bipolar Plates Workshop Approach to Provide a Metallic Bipolar Plate Module to the Industry, DOE bipolar plate workshop, Michigan [2017-02-14]. https://www.energy.gov/sites/prod/files/2017/05/f34/fcto_biploar_plates_wkshp_stroebel.pdf

  11. A. Hermann, T. Chaudhuri, and P. Spagnol, Bipolar plates for PEM fuel cells: A review, Int. J. Hydrogen Energy, 30(2005), No. 12, p. 1297.

    Article  CAS  Google Scholar 

  12. P.Y. Yi, L.F. Peng, T. Zhou, J.Q. Huang, and X.M. Lai, Composition optimization of multilayered chromium-nitride-carbon film on 316L stainless steel as bipolar plates for proton exchange membrane fuel cells, J. Power Sources, 236(2013), p. 47.

    Article  CAS  Google Scholar 

  13. C.H. Shen, M. Pan, Q. Yuan, and R.Z. Yuan, Studies on preparation and performance of sodium silicate/graphite conductive composites, J. Compos. Mater., 40(2006), No. 9, p. 839.

    Article  CAS  Google Scholar 

  14. H.C. Kuan, C.C.M. Ma, K.H. Chen, and S.M. Chen, Preparation, electrical, mechanical and thermal properties of composite bipolar plate for a fuel cell, J. Power Sources, 134(2004), No. 1, p. 7.

    Article  CAS  Google Scholar 

  15. J. Wind, R. Späh, W. Kaiser, and G. Böhm, Metallic bipolar plates for PEM fuel cells, J. Power Sources, 105(2002), No. 2, p. 256.

    Article  CAS  Google Scholar 

  16. W. Yoon, X.Y. Huang, P. Fazzino, K.L. Reifsnider, and M.A. Akkaoui, Evaluation of coated metallic bipolar plates for polymer electrolyte membrane fuel cells, J. Power Sources, 179(2008), No. 1, p. 265.

    Article  CAS  Google Scholar 

  17. Y. Fu, M. Hou, G.Q. Lin, J.B. Hou, Z.G. Shao, and B.L. Yi, Coated 316L stainless steel with CrxN film as bipolar plate for PEMFC prepared by pulsed bias arc ion plating, J. Power Sources, 176(2008), No. 1, p. 282.

    Article  CAS  Google Scholar 

  18. Y.M. Xiong, S.L. Zhu, and F.H. Wang, Synergistic corrosion behavior of coated Ti60 alloys with NaCl deposit in moist air at elevated temperature, Corros. Sci., 50(2008), No. 1, p. 15.

    Article  CAS  Google Scholar 

  19. L.J. Yang, H.J. Yu, L.J. Jiang, L. Zhu, X.Y. Jian, and Z. Wang, Graphite-polypyrrole coated 316L stainless steel as bipolar plates for proton exchange membrane fuel cells, Int. J. Miner. Metall. Mater., 18(2011), No. 1, p. 53.

    Article  CAS  Google Scholar 

  20. V. Mehta and J.S. Cooper, Review and analysis of PEM fuel cell design and manufacturing, J. Power Sources, 114(2003), No. 1, p. 32.

    Article  CAS  Google Scholar 

  21. M.P. Brady, H. Wang, B. Yang, J.A. Turner, M. Bordignon, R. Molins, M.A. Elhamid, L. Lipp, and L.R. Walker, Growth of Cr-Nitrides on commercial Ni—Cr and Fe—Cr base alloys to protect PEMFC bipolar plates, Int. J. Hydrogen Energy, 32(2007), No. 16, p. 3778.

    Article  CAS  Google Scholar 

  22. Y. Wang, C.M. Wu, W. Li, H.Y. Li, Y.C. Li, X.Y. Zhang, and L.L. Sun, Effect of bionic hydrophobic structures on the corrosion performance of Fe-based amorphous metallic coatings, Surf. Coat. Technol., 416(2021), art. No. 127176.

  23. R.A. Antunes, M.C.L. Oliveira, G. Ett, and V. Ett, Corrosion of metal bipolar plates for PEM fuel cells: A review, Int. J. Hydrogen Energy, 35(2010), No. 8, p. 3632.

    Article  CAS  Google Scholar 

  24. S.J. Lee, C.H. Huang, J.J. Lai, and Y.P. Chen, Corrosion-resistant component for PEM fuel cells, J. Power Sources, 131(2004), No. 1–2, p. 162.

    Article  CAS  Google Scholar 

  25. Q. Li, X. Lin, Q. Luo, Y.A. Chen, J.F. Wang, B. Jiang, and F.S. Pan, Kinetics of the hydrogen absorption and desorption processes of hydrogen storage alloys: A review, Int. J. Miner. Metall. Mater., 29(2022), No. 1, p. 32.

    Article  CAS  Google Scholar 

  26. Y. Li, W.J. Meng, S. Swathirajan, S.J. Harris, and G.L. Doll, Corrosion Resistant Pem Fuel Cell, United States Patent, Appl. 5624769, 1997.

  27. C. Jirarungsatian and A. Prateepasen, Pitting and uniform corrosion source recognition using acoustic emission parameters, Corros. Sci., 52(2010), No. 1, p. 187.

    Article  CAS  Google Scholar 

  28. Z.G. Chen, G.F. Zhang, and F. Bobaru, The Influence of passive film damage on pitting corrosion, J. Electrochem. Soc., 163(2016), No. 2, p. C19.

    Article  CAS  Google Scholar 

  29. H.Y. Tian, L. Fan, Y.Z. Li, K. Pang, F.Z. Chu, X. Wang, and Z.Y. Cui, Effect of NH +4 on the pitting corrosion behavior of 316 stainless steel in the chloride environment, J. Electroanal. Chem., 894(2021), art. No. 115368.

  30. N.B. Huang, C.H. Liang, and B.L. Yi, Corrosion resistance of PANi-coated steel in simulated PEMFC anodic environment, Mater. Corros., 59(2008), No. 1, p. 21.

    Article  CAS  Google Scholar 

  31. J.C. Jiang, S.J. Liu, Z.Y. Ma, L.Y. Wang, and K. Wu, Butler-Volmer equation-based model and its implementation on state of power prediction of high-power lithium titanate batteries considering temperature effects, Energy, 117(2016), p. 58.

    Article  CAS  Google Scholar 

  32. G. Hinds and E. Brightman, In situ mapping of electrode potential in a PEM fuel cell, Electrochem. Commun., 17(2012), p. 26.

    Article  CAS  Google Scholar 

  33. G. Hinds and E. Brightman, Towards more representative test methods for corrosion resistance of PEMFC metallic bipolar plates, Int. J. Hydrogen Energy, 40(2015), No. 6, p. 2785.

    Article  CAS  Google Scholar 

  34. J. Healy, C. Hayden, T. Xie, K. Olson, R. Waldo, M. Brundage, H. Gasteiger, and J. Abbott, Aspects of the chemical degradation of PFSA ionomers used in PEM fuel cells, Fuel Cells, 5(2005), No. 2, p. 302.

    Article  CAS  Google Scholar 

  35. A.M. Abdullah, A.M. Mohammad, T. Okajima, F. Kitamura, and T. Ohsaka, Effect of load, temperature and humidity on the pH of the water drained out from H2/air polymer electrolyte membrane fuel cells, J. Power Sources, 190(2009), No. 2, p. 264.

    Article  CAS  Google Scholar 

  36. K.H. Hou, C.H. Lin, M.D. Ger, S.W. Shiah, and H.M. Chou, Analysis of the characterization of water produced from proton exchange membrane fuel cell (PEMFC) under different operating thermal conditions, Int. J. Hydrogen Energy, 37(2012), No. 4, p. 3890.

    Article  CAS  Google Scholar 

  37. X.Z. Wang, C.P. Ye, D.D. Shi, H.Q. Fan, and Q. Li, Potential polarization accelerated degradation of interfacial electrical conductivity for Au/TiN coated 316L SS bipolar plates used in polymer electrolyte membrane fuel cells, Corros. Sci., 189(2021), art. No. 109624.

  38. M. Liu, H.F. Xu, J. Fu, and Y. Tian, Conductive and corrosion behaviors of silver-doped carbon-coated stainless steel as PEMFC bipolar plates, Int. J. Miner. Metall. Mater., 23(2016), No. 7, p. 844.

    Article  CAS  Google Scholar 

  39. H.Q. Fan, D.D. Shi, X.Z. Wang, J.L. Luo, J.Y. Zhang, and Q. Li, Enhancing through-plane electrical conductivity by introducing Au microdots onto TiN coated metal bipolar plates of PEMFCs, Int. J. Hydrogen Energy, 45(2020), No. 53, p. 29442.

    Article  CAS  Google Scholar 

  40. D.W. DeBerry, Modification of the electrochemical and corrosion behavior of stainless steels with an electroactive coating, J. Electrochem. Soc., 132(1985), No. 5, p. 1022.

    Article  CAS  Google Scholar 

  41. A.A. Hermas and M.S. Morad, A comparative study on the corrosion behaviour of 304 austenitic stainless steel in sulfamic and sulfuric acid solutions, Corros. Sci., 50(2008), No. 9, p. 2710.

    Article  CAS  Google Scholar 

  42. J.S. Kim, W.H.A. Peelen, K. Hemmes, and R.C. Makkus, Effect of alloying elements on the contact resistance and the passivation behaviour of stainless steels, Corros. Sci., 44(2002), No. 4, p. 635.

    Article  CAS  Google Scholar 

  43. R. Hornung and G. Kappelt, Bipolar plate materials development using Fe-based alloys for solid polymer fuel cells, J. Power Sources, 72(1998), No. 1, p. 20.

    Article  CAS  Google Scholar 

  44. X.W. Yuan, X. Wang, Y. Cao, and H.Y. Yang, Natural passivation behavior and its influence on chloride-induced corrosion resistance of stainless steel in simulated concrete pore solution, J. Mater. Res. Technol., 9(2020), No. 6, p. 12378.

    Article  CAS  Google Scholar 

  45. E. Hamada, K. Yamada, M. Nagoshi, N. Makiishi, K. Sato, T. Ishii, K. Fukuda, S. Ishikawa, and T. Ujiro, Direct imaging of native passive film on stainless steel by aberration corrected STEM, Corros. Sci., 52(2010), No. 12, p. 3851.

    Article  CAS  Google Scholar 

  46. X.Y. Wang, Y.S. Wu, L. Zhang, and B.F. Ding, Passivationm echanism of 316L stainless steel in oxidizing acid solution, J. Univ. Sci. Technol. Beijing, 7(2000), No. 3, p. 204.

    CAS  Google Scholar 

  47. C.Y. Zhang, Y.H. Wei, J. Yang, W. Emori, and J. Li, Effects of nitric acid passivation on the corrosion behavior of ZG06Cr13Ni4Mo stainless steel in simulated marine atmosphere, Mater. Corros., 71(2020), No. 9, p. 1576.

    Article  CAS  Google Scholar 

  48. Z.J. Lu and D.D. Macdonald, Transient growth and thinning of the barrier oxide layer on iron measured by real-time spectroscopic ellipsometry, Electrochim. Acta, 53(2008), No. 26, p. 7696.

    Article  CAS  Google Scholar 

  49. S. Habibzadeh, L. Li, D. Shum-Tim, E.C. Davis, and S. Omanovic, Electrochemical polishing as a 316L stainless steel surface treatment method: Towards the improvement of biocompatibility, Corros. Sci., 87(2014), p. 89.

    Article  CAS  Google Scholar 

  50. W. Han and F.Z. Fang, Fundamental aspects and recent developments in electropolishing, Int. J. Mach. Tools Manuf., 139(2019), p. 1.

    Article  CAS  Google Scholar 

  51. J. Richards, C. Cremers, P. Fischer, and K. Schmidt, Corrosion studies on electro polished stainless steels for the use as metallic bipolar plates in PEMFC applications, Energy Procedia, 20(2012), p. 324.

    Article  CAS  Google Scholar 

  52. S.J. Lee and J.J. Lai, The effects of electropolishing (EP) process parameters on corrosion resistance of 316L stainless steel, J. Mater. Process. Technol., 140(2003), No. 1–3, p. 206.

    Article  CAS  Google Scholar 

  53. W. Han and F.Z. Fang, Two-step electropolishing of 316L stainless steel in a sulfuric acid-free electrolyte, J. Mater. Process. Technol., 279(2020), art. No. 116558.

  54. A. Kumar, M. Ricketts, and S. Hirano, Ex situ evaluation of nanometer range gold coating on stainless steel substrate for automotive polymer electrolyte membrane fuel cell bipolar plate, J. Power Sources, 195(2010), No. 5, p. 1401.

    Article  CAS  Google Scholar 

  55. S.H. Wang, J. Peng, W.B. Lui, and J.S. Zhang, Performance of the gold-plated titanium bipolar plates for the light weight PEM fuel cells, J. Power Sources, 162(2006), No. 1, p. 486.

    Article  CAS  Google Scholar 

  56. X.J. Yan, J.B. Zhuang, N.B. Huang, C.H. Liang, H.T. Wang, and L.S. Xu, Corrosion behavior of SAMs modified silver-coated 316LSS as PEMFC bipolar plates, Key Eng. Mater., 645–646(2015), p. 1233.

    Article  Google Scholar 

  57. H.L. Wang and J.A. Turner, Electrochemical nitridation of a stainless steel for PEMFC bipolar plates, Int. J. Hydrogen Energy, 36(2011), No. 20, p. 13008.

    Article  CAS  Google Scholar 

  58. S. Pugal Mani and N. Rajendran, Corrosion and interfacial contact resistance behavior of electrochemically nitrided 316L SS bipolar plates for proton exchange membrane fuel cells, Energy, 133(2017), p. 1050.

    Article  CAS  Google Scholar 

  59. D.M. Mattox, Physical vapor deposition (PVD) processes, Met. Finish., 99(2001), p. 409.

    Article  Google Scholar 

  60. M. Aliofkhazraei and N. Ali, PVD technology in fabrication of micro- and nanostructured coatings, [in] Comprehensive Materials Processing, Elsevier, Amsterdam, 2014. p.49.

    Chapter  Google Scholar 

  61. N.S. Mansoor, A. Fattah-Alhosseini, H. Elmkhah, and A. Shishehian, Comparison of the mechanical properties and electrochemical behavior of TiN and CrN single-layer and CrN/TiN multi-layer coatings deposited by PVD method on a dental alloy, Mater. Res. Express, 6(2020), No. 12, art. No. 126433.

  62. S.H. Song, B.K. Min, M.H. Hong, and T.Y. Kwon, Application of a novel CVD TiN coating on a biomedical Co—Cr alloy: An evaluation of coating layer and substrate characteristics, Materials, 13(2020), No. 5, art. No. 1145.

  63. J.L. Wang, J.C. Sun, S. Li, Z.S. Wen, and S.J. Ji, Surface diffusion modification AISI 304SS stainless steel as bipolar plate material for proton exchange membrane fuel cell, Int. J. Hydrogen Energy, 37(2012), No. 1, p. 1140.

    Article  CAS  Google Scholar 

  64. D.G. Nam and H.C. Lee, Thermal nitridation of chromium electroplated AISI316L stainless steel for polymer electrolyte membrane fuel cell bipolar plate, J. Power Sources, 170(2007), No. 2, p. 268.

    Article  CAS  Google Scholar 

  65. Y. Hung, H. Tawfik, and D. Mahajan, Durability and characterization studies of polymer electrolyte membrane fuel cell’s coated aluminum bipolar plates and membrane electrode assembly, J. Power Sources, 186(2009), No. 1, p. 123.

    Article  CAS  Google Scholar 

  66. A. Gago, A. Ansar, N. Wagner, J. Arnold, and K. Friedrich, Titanium coatings deposited by thermal spraying for bipolar plates of PEM electrolysers, [in] The 64th Annual Meeting of the International Society of Electrochemistry, Queretaro, 2013, p. 7.

  67. K.M. El-Khatib, M.O. Abou Helal, A.A. El-Moneim, and H. Tawfik, Corrosion stability of SUS316L HVOF sprayed coatings as lightweight bipolar plate materials in PEM fuel cells, Anti-Corros. Methods Mater., 51(2004), No. 2, p. 136.

    Article  CAS  Google Scholar 

  68. H.B. Zhang, G.Q. Lin, M. Hou, L. Hu, Z.Y. Han, Y. Fu, Z.G. Shao, and B.L. Yi, CrN/Cr multilayer coating on 316L stainless steel as bipolar plates for proton exchange membrane fuel cells, J. Power Sources, 198(2012), p. 176.

    Article  CAS  Google Scholar 

  69. Y.J. Ren, C.R. Zhang, G.M. Liu, and C.L. Ceng, A review on corrosion and protection of metallic bipolar plates for proton exchange membrane fuel cell, Corros. Sci. Protetion Technol., 21(2009), p. 388.

    CAS  Google Scholar 

  70. Y. Fu, G.Q. Lin, M. Hou, B. Wu, Z.G. Shao, and B.L. Yi, Carbon-based films coated 316L stainless steel as bipolar plate for proton exchange membrane fuel cells, Int. J. Hydrogen Energy, 34(2009), No. 1, p. 405.

    Article  CAS  Google Scholar 

  71. K. Feng, Y. Shen, H.L. Sun, D.A. Liu, Q.Z. An, X. Cai, and P.K. Chu, Conductive amorphous carbon-coated 316L stainless steel as bipolar plates in polymer electrolyte membrane fuel cells, Int. J. Hydrogen Energy, 34(2009), No. 16, p. 6771.

    Article  CAS  Google Scholar 

  72. S.H. Lee, V.E. Pukha, V.E. Vinogradov, N. Kakati, S.H. Jee, S.B. Cho, and Y.S. Yoon, Nanocomposite-carbon coated at low-temperature: A new coating material for metallic bipolar plates of polymer electrolyte membrane fuel cells, Int. J. Hydrogen Energy, 38(2013), No. 33, p. 14284.

    Article  CAS  Google Scholar 

  73. L.X. Wang, J.C. Sun, P.B. Li, B. Jing, S. Li, Z.S. Wen, and S.J. Ji, Niobized AISI 304 stainless steel bipolar plate for proton exchange membrane fuel cell, J. Power Sources, 208(2012), p. 397.

    Article  CAS  Google Scholar 

  74. K.S. Weil, G. Xia, Z.G. Yang, and J.Y. Kim, Development of a niobium clad PEM fuel cell bipolar plate material, Int. J. Hydrogen Energy, 32(2007), No. 16, p. 3724.

    Article  CAS  Google Scholar 

  75. K. Feng, Z.G. Li, X. Cai, and P.K. Chu, Corrosion behavior and electrical conductivity of niobium implanted 316L stainless steel used as bipolar plates in polymer electrolyte membrane fuel cells, Surf. Coat. Technol., 205(2010), No. 1, p. 85.

    Article  CAS  Google Scholar 

  76. K. Feng, Y. Shen, J.M. Mai, D.A. Liu, and X. Cai, An investigation into nickel implanted 316L stainless steel as a bipolar plate for PEM fuel cell, J. Power Sources, 182(2008), No. 1, p. 145.

    Article  CAS  Google Scholar 

  77. M.C. Li, S.Z. Luo, C.L. Zeng, J.N. Shen, H.C. Lin, and C.N. Cao, Corrosion behavior of TiN coated type 316 stainless steel in simulated PEMFC environments, Corros. Sci., 46(2004), No. 6, p. 1369.

    Article  CAS  Google Scholar 

  78. E.A. Cho, U.S. Jeon, S.A. Hong, I.H. Oh, and S.G. Kang, Performance of a 1 kW-class PEMFC stack using TiN-coated 316 stainless steel bipolar plates, J. Power Sources, 142(2005), No. 1–2, p. 177.

    Article  CAS  Google Scholar 

  79. Y. Wang and D.O. Northwood, An investigation into TiN-coated 316L stainless steel as a bipolar plate material for PEM fuel cells, J. Power Sources, 165(2007), No. 1, p. 293.

    Article  CAS  Google Scholar 

  80. Q.B. You, J. Xiong, T.N. Yang, T. Hua, Y.L. Huo, and J.B. Liu, Effect of cermet substrate characteristics on the microstructure and properties of TiAlN coatings, Int. J. Miner. Metall. Mater., 29(2022), No. 3, p. 547.

    Article  CAS  Google Scholar 

  81. Y. Zhao, L. Wei, P.Y. Yi, and L.F. Peng, Influence of Cr—C film composition on electrical and corrosion properties of 316L stainless steel as bipolar plates for PEMFCs, Int. J. Hydrogen Energy, 41(2016), No. 2, p. 1142.

    Article  CAS  Google Scholar 

  82. T. Zhang and C.L. Zeng, Corrosion protection of 1Cr18Ni9Ti stainless steel by polypyrrole coatings in HCl aqueous solution, Electrochim. Acta, 50(2005), No. 24, p. 4721.

    Article  CAS  Google Scholar 

  83. S. Joseph, J.C. McClure, R. Chianelli, P. Pich, and P.J. Sebastian, Conducting polymer-coated stainless steel bipolar plates for proton exchange membrane fuel cells (PEMFC), Int. J. Hydrogen Energy, 30(2005), No. 12, p. 1339.

    Article  CAS  Google Scholar 

  84. M.A.L. García and M.A. Smit, Study of electrodeposited polypyrrole coatings for the corrosion protection of stainless steel bipolar plates for the PEM fuel cell, J. Power Sources, 158(2006), No. 1, p. 397.

    Article  CAS  Google Scholar 

  85. Y. Wang and D.O. Northwood, An investigation into polypyrrole-coated 316L stainless steel as a bipolar plate material for PEM fuel cells, J. Power Sources, 163(2006), No. 1, p. 500.

    Article  CAS  Google Scholar 

Download references

Acknowledgements

This work was financially supported by the National Natural Science Foundation of China (No. 51704017), the National Key Research and Development plan of China (No. 2018YFB1502403), and the Communication Program for Young Scientist in USTB (No. QNXM20210010).

Author information

Authors and Affiliations

  1. State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing, 100083, China

    Gaoyang Liu, Faguo Hou, Shanlong Peng & Xindong Wang

  2. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing, 100083, China

    Gaoyang Liu, Faguo Hou, Shanlong Peng & Xindong Wang

  3. Department of Chemical and Biological Engineering, University of British Columbia, 2360 East Mall, Vancouver, BC, V6T 1Z3, Canada

    Baizeng Fang

Authors
  1. Gaoyang Liu
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Faguo Hou
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Shanlong Peng
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Xindong Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Baizeng Fang
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding authors

Correspondence to Gaoyang Liu or Baizeng Fang.

Additional information

Conflict of Interest

The authors declare no conflict of interest.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Liu, G., Hou, F., Peng, S. et al. Process and challenges of stainless steel based bipolar plates for proton exchange membrane fuel cells. Int J Miner Metall Mater 29, 1099–1119 (2022). https://doi.org/10.1007/s12613-022-2485-5

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12613-022-2485-5

Keywords

Search

Navigation