Skip to main content
Log in

Evolution of ferronickel particles during the reduction of low-grade saprolitic laterite nickel ore by coal in the temperature range of 900–1250°C with the addition of CaO-CaF2-H3BO3

  • Published:
International Journal of Minerals, Metallurgy and Materials Aims and scope Submit manuscript

Abstract

The method of producing ferronickel at low temperature (1250–1400°C) has been applied since the 1950s at Nippon Yakin Kogyo, Oheyama Works, Japan. Limestone was used as an additive to adjust the slag composition for lowering the slag melting point. The ferronickel product was recovered by means of a magnetic separator from semi-molten slag and metal after water quenching. To increase the efficiency of magnetic separation, a large particle size of ferronickel is desired. Therefore, in this study, the influences of CaO, CaF2, and H3BO3 additives on the evolution of ferronickel particle at ≤1250°C were investigated. The experiments were conducted at 900–1250°C with the addition of CaO, CaF2, and H3BO3. The reduction processes were carried out in a horizontal tube furnace for 2 h under argon atmosphere. At 1250°C, with the CaO addition of 10wt% of the ore weight, ferronickel particles with size of 20 µm were obtained. The ferronickel particle size increased to 165 µm by adding 10wt% CaO and 10wt% CaF2. The addition of boric acid further increased the ferronickel particle size to 376 µm, as shown by the experiments with the addition of 10wt% CaO, 10wt% CaF2, and 10wt% H3BO3.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Team Kalkine, How Is the Nickel Landscape Shaping Up, Kalkine Media, Sydney [2019-11–13]. https://kalkinemedia.com/au/blog/how-is-the-nickel-landscape-shaping-up.

    Google Scholar 

  2. U.S. Geological Survey, Mineral Commodity Summaries 2019, U.S. Geological Survey, Washington [2019-02–28]. https://doi.org/10.3133/70202434.

    Google Scholar 

  3. C.T. Harris, J.G. Peacey, and C.A. Pickles, Thermal upgrading of nickeliferous laterites—A review, [in] J. Liu, J. Peacey, M. Barati, S. Kashani-Nejad, and B. Davis, eds., Pyrometallurgy of Nickel and Cobalt 2009, Proceedings of the 48th Conference on Metallurgists, Ontario, 2009, p. 51.

    Google Scholar 

  4. J.C. Dong, Y.G. Wei, S.W. Zhou, B. Li, Y.D. Yang, and A. McLean, The effect of additives on Ni, Fe and Co from nickel laterite ores, JOM, 70(2018), No. 10, p. 2365.

    Article  CAS  Google Scholar 

  5. G.H. Li, T.M. Shi, M.J. Rao, T. Jiang, and Y.B. Zhang, Beneficiation of nickeliferous laterite by reduction roasting in the presence of sodium sulfate, Miner. Eng., 32(2012), p. 19.

    Article  Google Scholar 

  6. D.Q. Zhu, Y. Cui, K. Vining, S. Hapugoda, J. Douglas, J. Pan, and G.L. Zheng, Upgrading low nickel content laterite ores using selective reduction followed by magnetic separation, Int. J. Miner. Process., 106–109(2012), p. 1.

    Google Scholar 

  7. D.Q. Zhu, L.T. Pan, Z.Q. Guo, J. Pan, and F. Zhang, Utilization of limonitic nickel laterite to produce ferronickel concentrate by the selective reduction-magnetic separation process, Adv. Powder Technol., 30(2019), No. 2, p. 451.

    Article  CAS  Google Scholar 

  8. R. Elliott, C.A. Pickles, and J. Peacey, Ferronickel particle formation during the carbothermic reduction of a limonitic laterite ore, Miner. Eng., 100(2017), p. 166.

    Article  CAS  Google Scholar 

  9. M. Jiang, T.C. Sun, Z.G. Liu, J. Kou, N. Liu, and S.Y. Zhang, Mechanism of sodium sulfate in promoting selective reduction of nickel laterite ore during reduction roasting process, Int. J. Miner. Process., 123(2013), p. 32.

    Article  CAS  Google Scholar 

  10. J. Lu, S.J. Liu, J. Shangguan, W. Du, F. Pan and S. Yang, The effect of sodium sulphate on the hydrogen reduction process of nickel laterite ore, Miner. Eng., 49(2013), p. 154.

    Article  CAS  Google Scholar 

  11. C.T. Harris, J.G. Peacey, and C.A. Pickles, Selective sulphidation and flotation of nickel from a nickeliferous laterite ore, Miner. Eng., 54(2013), p. 21.

    Article  CAS  Google Scholar 

  12. M.J. Rao, G.H. Li, X. Zhang, J. Luo, Z.W. Peng, and T. Jiang, Reductive roasting of nickel laterite ore with sodium sulphate form Fe-Ni production. Part II: Phase transformation and grain growth, Sep. Sci. Technol., 51(2016), No. 10, p. 1727.

    Article  CAS  Google Scholar 

  13. X.P. Wang, T.C. Sun, C. Chen, and J. Kou, Effects of Na2SO4 on iron and nickel reduction in a high-iron and low-nickel laterite ore, Int. J. Miner. Metall. Mater., 25(2018), No. 4, p. 383.

    Article  CAS  Google Scholar 

  14. G.J. Chen, J.S. Shiau, S.H. Liu, and W.S. Hwang, Optimal combination of calcination and reduction conditions as well as Na2SO4 additive for carbothermic reduction of limonite ore, Mater. Trans., 57(2016), No. 9, p. 1560.

    Article  CAS  Google Scholar 

  15. S.W. Zhou, Y.G. Wei, B. Li, H. Wang, B.Z. Ma, and C.Y. Wang, Chloridization and reduction roasting of high-magnesium low-nickel oxide ore followed by magnetic separation to enrich ferronickel concentrate, Metall. Mater. Trans. B, 47(2016), No. 1, p. 145.

    Article  CAS  Google Scholar 

  16. Z.Z. Wang, M.S. Chu, Z.G. Liu, H.T. Wang, W. Zhao, and L.H. Gao, Preparing ferro-nickel alloy from low grade laterite nickel ore based on metallized reduction-magnetic separation, Metals, 7(2017), No. 8, p. 313.

    Article  Google Scholar 

  17. T. Watanabe, S. Ono, H. Arai, and T. Matsumori, Direct reduction of garnierite ore for production of ferro-nickel with a rotary kiln at Nippon Yakin Kogyo Co., Ltd., Oheyama Works, Int. J. Miner. Process., 19(1987), No. 1–4, p. 173.

    Article  CAS  Google Scholar 

  18. Y. Kobayashi, H. Todoroki, and H. Tsuji, Melting behavior of siliceous nickel ore in a rotary kiln to produce ferronickel alloys, ISIJ Int., 51(2011), No. 1, p. 35.

    Article  CAS  Google Scholar 

  19. H. Tsuji, Behavior of reduction and growth of metal in smelting of saprolite Ni-ore in a rotary kiln for production of ferronickel alloy, ISIJ Int., 52(2012), No. 6, p. 1000.

    Article  CAS  Google Scholar 

  20. A.E.M. Warner, C.M. Díaz, A.D. Dalvi, P.J. Mackey, and A.V. Tarasov, JOM world nonferrous smelter survey, Part III: Nickel: Laterite, JOM, 58(2006), No. 4, p. 11.

    Article  Google Scholar 

  21. B. Li, H. Wang, and Y.G. Wei, The reduction of nickel from low-grade nickel laterite ore using a solid-state deoxidisation method, Miner. Eng., 24(2011), No. 14, p. 1556.

    Article  CAS  Google Scholar 

  22. X.M. Lv, L.W. Wang, Z.X. You, J. Dang, X.W. Lv, G.B. Qiu, and C.G. Bai, Preparation of Ferronickel from Nickel Laterite Ore via Semi-Molten Reduction Followed by Magnetic Separation, [in] Extraction 2018, Cham, 2018, p. 913

  23. X.D. Ma, Z.X. Cui, and B.J. Zhao, Efficient utilization of nickel laterite to produce master alloy, JOM, 68(2016), No. 12, p. 3006.

    Article  CAS  Google Scholar 

  24. M.H. Morcali, L.T. Khajavi, and D.B. Dreisinger, Extraction of nickel and cobalt from nickeliferous limonitic laterite ore using borax containing slags, Int. J. Miner. Process., 167(2017), p. 27.

    Article  CAS  Google Scholar 

  25. X. Zhang, F.Q. Gu, Z.W. Peng, L.C. Wang, H.M. Tang, M.J. Rao, Y.B. Zhang, G.H. Li, T. Jiang, and Y. Wang, Recovering magnesium from ferronickel slag by vacuum reduction: Thermodynamic analysis and experimental verification, ACS Omega, 4(2019), No. 14, p. 16062.

    Article  CAS  Google Scholar 

Download references

Acknowledgements

The authors would like to thank the Program of Research, Community Service, and Innovation of the Institut Teknologi Bandung (P3MI-ITB) for funding this research.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Zulfiadi Zulhan.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zulhan, Z., Shalat, W. Evolution of ferronickel particles during the reduction of low-grade saprolitic laterite nickel ore by coal in the temperature range of 900–1250°C with the addition of CaO-CaF2-H3BO3. Int J Miner Metall Mater 28, 612–620 (2021). https://doi.org/10.1007/s12613-020-2025-0

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12613-020-2025-0

Keywords

Navigation