Abstract
Based on the analysis of the preparation of metal rubber (MR) and two pivotal hypotheses, the uniform distribution and the unaltered topological structure of wires in the radial direction of columns in the punch process, a 3D parametrical model was established based on four approaches: helix-making, planar roughcast-weaving, planar roughcast-rolling, and 3D roughcast punching. In the modeling process, 5 lattice types of weave patterns in planar roughcast were put forward, and 10 quantificational modeling parameters were picked up to exclusively define the column MR component structure. The wire distribution was visualized by CAD techniques. The important performance parameter of column MR components (relative density \( \bar \rho \)) can be forecasted by modeling computing, which provides the necessary foundation for the design and optimization of MR materials.
Similar content being viewed by others
References
X.P. Dong, G.Q. Liu, and L. Niu, Fretting wear of stainless steel wires in metal rubber damping components, Tribology (in Chinese), 28(2008), No.3, p.248.
Y.J. Liu, J.C. Yang, and H.B. Bai, Application of metal rubber as cushion device to breechblock baring pole of propelled gun, J. Ordnance Eng. Coll. (in Chinese), 15(2003), No.3, p.56.
S.C. Wang, Z.Q. Deng, and H.B. Gao, Experimental investigation on mechanical property of metal rubber used in lunar lander in high or low temperature, J. Aeronaut. Mater. (in Chinese), 24(2004), No.2, p.271.
Y.H. Xia, H.Y. Jiang, and G.X. Li, Test of gas penetrability of porous metal rubber material made of 0Cr18Ni9Ti, J. Funct. Mater. (in Chinese), 35(2004), No.2, p.267.
H.Y. Jiang and Y.H. Xia, Analysis on infiltrative characteristics of deformable porous metal rubber material and parameters identification, Chin. J. Mech. Eng. (in Chinese), 18(2005), No.4, p.562.
Z.Y. Li and Z.R. Lu, New all-metal damper for spacecraft, Aerosp. Shanghai (in Chinese), 2005, No.5, p.58.
C. Zhao, Y.J. He, and H. Zhang, Application research of metal rubber, Noise Vibr. Control (in Chinese), 2006, No.5, p.45.
Y.Q. Chen, B.T. Guo, and Z.G. Zhu, The investigation of the stiffness characteristics and the stress-strain relation of metal rubber, J. Aerosp. Power (in Chinese), 17(2002), No.4, p.416.
Y.H. Xia, H.Y. Jiang, and H.R. Ao, Research on the effect of wire distribution on the characteristics of metal rubber element, China Mech. Eng. (in Chinese), 13(2002), No.10, p.880.
Y.Y. Li and X.Q. Huang, Nonlinear constitutive relation for metal rubber with different density, J. Aeronaut. Mater. (in Chinese), 28(2008), No.2, p.70.
Y.Y. Li and X.Q. Huang, Effect of shape factor on mechanical characteristics of metal rubber, Noise Vib. Control (in Chinese), 27(2008), No.6, p.45.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Huang, Mj., Dong, Xp. & Liu, Gq. 3D Modeling of the preparation process of metal rubber material. Int J Miner Metall Mater 17, 75–79 (2010). https://doi.org/10.1007/s12613-010-0113-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12613-010-0113-2