Pneumonia Classification Using Deep Learning from Chest X-ray Images During COVID-19

The outbreak of the novel corona virus disease (COVID-19) in December 2019 has led to global crisis around the world. The disease was declared pandemic by World Health Organization (WHO) on 11th of March 2020. Currently, the outbreak has affected more than 200 countries with more than 37 million confirmed cases and more than 1 million death tolls as of 10 October 2020. Reverse-transcription polymerase chain reaction (RT-PCR) is the standard method for detection of COVID-19 disease, but it has many challenges such as false positives, low sensitivity, expensive, and requires experts to conduct the test. As the number of cases continue to grow, there is a high need for developing a rapid screening method that is accurate, fast, and cheap. Chest X-ray (CXR) scan images can be considered as an alternative or a confirmatory approach as they are fast to obtain and easily accessible. Though the literature reports a number of approaches to classify CXR images and detect the COVID-19 infections, the majority of these approaches can only recognize two classes (e.g., COVID-19 vs. normal). However, there is a need for well-developed models that can classify a wider range of CXR images belonging to the COVID-19 class itself such as the bacterial pneumonia, the non-COVID-19 viral pneumonia, and the normal CXR scans. The current work proposes the use of a deep learning approach based on pretrained AlexNet model for the classification of COVID-19, non-COVID-19 viral pneumonia, bacterial pneumonia, and normal CXR scans obtained from different public databases. The model was trained to perform two-way classification (i.e., COVID-19 vs. normal, bacterial pneumonia vs. normal, non-COVID-19 viral pneumonia vs. normal, and COVID-19 vs. bacterial pneumonia), three-way classification (i.e., COVID-19 vs. bacterial pneumonia vs. normal), and four-way classification (i.e., COVID-19 vs. bacterial pneumonia vs. non-COVID-19 viral pneumonia vs. normal). For non-COVID-19 viral pneumonia and normal (healthy) CXR images, the proposed model achieved 94.43% accuracy, 98.19% sensitivity, and 95.78% specificity. For bacterial pneumonia and normal CXR images, the model achieved 91.43% accuracy, 91.94% sensitivity, and 100% specificity. For COVID-19 pneumonia and normal CXR images, the model achieved 99.16% accuracy, 97.44% sensitivity, and 100% specificity. For classification CXR images of COVID-19 pneumonia and non-COVID-19 viral pneumonia, the model achieved 99.62% accuracy, 90.63% sensitivity, and 99.89% specificity. For the three-way classification, the model achieved 94.00% accuracy, 91.30% sensitivity, and 84.78%. Finally, for the four-way classification, the model achieved an accuracy of 93.42%, sensitivity of 89.18%, and specificity of 98.92%.


Introduction
Pneumonia is a common disease caused by different microbial species such as bacteria, virus, and fungi. The word "Pneumonia" comes from the Greek word "Pneumon" which translates to the lungs. Thus, the word pneumonia is associated with lung disease. In medical terms, pneumonia is a disease that causes inflammation of either one or both lung parenchyma [1]. However, other causes of pneumonia include food aspiration and exposure to chemicals. Based on infection, pneumonia occurs as a result of inflammation caused by pathogens which lead the lung's alveoli to fill up with fluid or pus and thereby leading to decrease of carbon dioxide (CO 2 ) and oxygen (O 2 ) exchange between blood and the lungs, making it hard for infected persons to breathe. Some of the symptoms of pneumonia include the shortness of breath, fever, cough, chest pain, etc. Moreover, the people at risk of pneumonia are elderly people (above 65 years), children (below the age of 5 years), and people with other complications such as HIV/AIDS, diabetes, chronic respiratory diseases, cardiovascular diseases, cancer, hepatic disease, etc. [2][3][4][5]. Table 1 presents a classification of pathogens that causes pneumonia.

Diagnosis and Treatment of Pneumonia
There are different approaches for the diagnosis of pneumonia, some of these approaches include chest X-rays and CT scan (which form the basis of our contribution), sputum test, pulse oximetry, thoracentesis, blood gas analysis, bronchoscopy, pleural fluid culture, complete blood count, etc. Mostly, pneumonia infection is treated based on the causative pathogen. For bacterial pneumonia, antibiotics are used; for viral pneumonia such as influenzas, SARS and MERS, antiviral drugs are used while antifungal drugs are used for fungal pneumonia [6][7][8].

COVID-19 and Pneumonia
COVID-19 is an extremely contagious disease caused by severe acute respiratory syndrome coronavirus 2 (SAR-CoV-2) which is the recent disease that is caused by one of the family members of Coronaviridae family. In the past, two members of this family known as SARS-CoV-1 and Middle East Respiratory Syndrome Coronavirus (MERS-CoV) have caused a global epidemic. The first case of COVID-19 was reported in Wuhan, Hubei province of mainland China on the 31st December 2019. The virus spread from city to city and from one country to another leading to a global health crisis. However, it was not until March 11, 2020 that WHO declared it as pandemic [8][9][10]. COVID-19 can be transmitted through respiratory droplets that are exhaled or secreted by infected persons. Coronaviruses invade the lung's alveoli (an organ responsible for exchange of O 2 and CO 2 ), thereby causing pneumonia. The symptoms of COVID-19 include dry cough, fatigue, fever, septic shock, organ failure, anorexia, dyspnea, myalgias, sputum secretion severe pneumonia, acute respiratory distress syndrome (ARDS), etc. [11][12][13][14]. The pandemic caused by SAR-CoV-2 is alarming due to the fact that there is no approved drug or vaccine [15].
In order to curb further spread of the virus, governments of various countries and states impose city lockdowns [56,57], flight cancellations, border restrictions, closure of workplaces, restaurants, postponement of sport, religious, cultural, and entertainment event and activities, wearing of face mask, social distancing of 1-2 m, and creating awareness on hygiene. Many countries are facing challenges regarding the number of reported cases of COVID-19 as a result of the lack of RT-PCR test kit and delay in the test kit. This delay is detrimental as it leads to more cases due to interaction between the infected patients waiting for result with a healthy population [16,17].

SARS-CoV1 and MERS-CoV
The first pandemic of the coronavirus family started in China's South Eastern part and Hong Kong in the year 2002 due to the discovery of pathogenic virus known as SARS-CoV-1. The disease spread globally due to air travel of patients from one country to another leading to SARS pandemic. According to WHO 2004, more than 8000 confirmed cases of SARS-CoV and 774 associated deaths were recorded globally. The outbreak has caused both public and economic burdens with estimated losses of billions of dollars [18]. The second pandemic of coronavirus is caused by β-CoVs in 2012 in Saudi Arabia; unlike SARS-CoV, MERS is caused by MERS-CoV which was firstly identified in a patient sputum sample of a 60-year-old Saudi Arabian man. According to WHO reports, there were more than 1850 confirmed cases of MERS-CoV with 30% mortality rate [19]. And up until November 2019, there are closed to 2500 cases of MERS-CoV resulting in 858 deaths.

Identification of Drugs, Development of Vaccines, and Prediction of COVID-19 using AI-Driven Models
Currently, there is no exact cure for COVID-19 disease. However, scientists are sprinting to develop a vaccine which is the most effective way to contain and prevent the spread of the virus. There are multiple technologies which are under evaluation such as inactivated virus, protein subunit, nucleic acid, and replicating and non-replicating viral vector. To speed up the process, scientist must overcome so many challenges which include developing a viable immunogen, development of successful animal model, clinical trials, viral mutations, time constraints, and funding [20,21]. Recently, Russia has approved a vaccine based on adenovirus vector developed by the Gamaleya National Center of Epidemiology and Microbiology Moscow. However, scientists around the world have criticized the efficiency of the vaccine, the phases it undergoes, and the lack of published results related to the earlier trial stages [22].
Apart from vaccines, there is ongoing research by different companies and laboratories on repurposing existing antiviral drugs such as remdesivir, ritonavir, and lopinavir. To generate potential drugs against COVID-19, scientist turned to artificial intelligence and machine learning approach for efficient identification of potent drugs. A study carried out by Beck et al. [23] using pretrained deep learning model identified "Atazanavir" an antiretroviral drug that is used for the prevention of HIV as the potential potent COVID-19 drug among all the commercially available antiviral drugs. On the other hand, Li et al. [24] identified Nelfinavir, Bictegravir, Tegobuv, and Prulifloxacin as potential drugs for COVID-19 after screening 8000 approved and experimental molecules and compounds obtained from Drugbank.
Medical experts (e.g., epidemiologists) are facing challenges such as the need for accurate data collection, analysis and precise estimation, and forecasting of the number of cases related to pandemics and epidemics. Recently, AI-driven models have proven to be valuable in terms of prediction and classification of medical data. Since the outbreak of COVID-19, data analyst and medical practitioners adopted the use of AI models for prediction and forecasting of COVID-19 cases [25]. The first company to report the use AI for prediction of COVID-19 and sent warning alerts to its customers prior to 2020 is the BlueDot AI-based company. However, other scientists have reported the use of AI models such as the use of model-free methods by Zeng et al. [26] for the prediction of inter-provincial transmissions of COVID-19 in mainland China. Hu et al. [27] utilized AI-driven methods for real-time forecasting of COVID-19 outbreak within China based on lengths, size estimations, and ending time of the outbreak based on data obtained from WHO (collected between 19 January 2020 and 16 February 2020).

Deep Learning and Transfer Learning
Deep learning (DL) is a branch of machine learning (ML), a subset of artificial intelligence (AI) inspired by the makeup of the human brain. It is termed as a sub-field of ML that works similar to the biology of human brains by taking data and processing the data through neural networks. Many biomedical health issues such as cancer (brain tumor and breast cancer) detections are using computer-aided diagnosis based on AI models. Precisely, DL models can detect hidden features in images which are not apparent or cannot be detected by medical experts. In terms of DL, convolutional neural network (CNN) is the leading DL tool that is popularly used in different sub-field of healthcare system due to their ability to extract features and learn to distinguish between different classes (i.e., positive and negative, infected and healthy, cancer and non-cancer, etc.). Transfer learning (TL) has provided easier approach to quickly retrain neural networks on selected datasets with high accuracy [28,29].

AlexNet
AlexNet model is a DL model proposed by Alex Krizhevsky which utilize rectified linear unit (ReLu) in place of Sigmoid function which is used in traditional neural networks [58]. The model achieved 84% accuracy in 2012 ImageNet Large Scale Visual Recognition Challenge (ILSVRC). It contains five convolution (CONV) blocks or layer with convolutional filter size 3 × 3 without padding and 2 × 2 window size of max pooling operation. The last three layers are two fully connected layers (FCL) and the output layer as shown in Fig. 1. Other terms include batch normalization (BN) and feature map (FM). SoftMax activation function is utilized in the output layer for classification [30,31].
The standard input size for AlexNet model is 227 × 227 × 3. The model consists of overall eight layers, five are convolutional layers, and three fully connected layers. The first two convolutional layers are made of three operations, which include convolution, pooling, and normalization. AlexNet uses ReLU as an activation function, unlike Tanh and sigmoid functions that are used in traditional machine learning. ReLU converts negative numbers to zeros and helps models learn non-linear functions [30].
Max pooling is the most common pooling methods in which its main function is to down sample or to reduce image size by pooling most important feature or by pooling out the number with a highest pixel value. The next two layers are mainly convolution layers without pooling and normalization and the final convolution layer consists of only convolution and pooling without normalization. The first two fully connected layers are dropout layers in which its main function is to reduce overfitting by reducing the number of neurons. The final fully connected layer is known as classification layer [32].

Challenges
As the number of COVID-19 patients grows exponentially, there is a high need for massive detection, which is critical for prevention and control. Medical practitioners all over the world require a sophisticated system to accurately diagnose COVID-19 disease. Different approaches are currently in use for detection of different types of pneumonia. However, detection of different strains of pathogens using molecular testing is still not up to standard of point of care diagnostics. Instead, specimens are collected from site of infections and transfer to a fully equipped or specialized laboratories for diagnosis using RT-PCR sequencing approach which is the current gold standard [33]. This method is deemed expensive and often lead to false results. Moreover, underdeveloped countries and remote areas with limited testing kit and unequipped hospitals with few or zero number of ventilators have become the epicenter of the disease. Thus, there is a high need for developing an alternative approach which is fast, cheap, simple, and reliable. The use of X-ray has proven to be an alternative; however, this method is sometimes tedious for qualified radiologist [34]. These challenges can be addressed by computer-aided detection method using the DL approach, which is accurate, fast, and precise.
The majority of research in the literature only classified two classes (such as COVID-19 vs normal). However, few researches addressed multi classes and classified each class from another. Moreover, the current articles in the stateof-the-art only addressed three-way classification. In this article, we present four-way classification (three types of pneumonia and normal CXR images). We also compare each type with another which is also missing in the majority of the literature.

Contribution
Accordingly, our contributions have been summed up as follows. •

Related Work
The last decade has seen an exponential rise in the application of DL in the healthcare system. Different studies have shown that DL models can be used for classification of pathological cancer images, diabetic retinopathy, CT scans of pneumonia, and tuberculosis as well as microbial slide images. In the field of pathology, pathologist, computer scientist, and radiologist have been working together to detect diseases such as cancer, pneumonia, and tuberculosis using computer-aided diagnosis [35][36][37].
In terms of application of DL models for detection of pneumonia using CT scan and X-ray images, we presented a literature review based on studies that: 1. Classified/distinguished between COVID-19, non-COVID-19 viral pneumonia, and healthy CXR images or between COVID-19, bacterial pneumonia, and healthy images (i.e., four-way and three-way classifications).
Chest scans based on chest X-ray or CT scan are an approach radiologist used to distinguish between patient suffering from pneumonia and healthy person. The difference is based on the presence of white hazy patches known as "Ground-glass opacity" in infected patient which is absent in healthy persons. However, as a result of scarcity of test for diagnosing COVID-19 as well as the high cost (120-130 USD), time consuming, low sensitivity, laborious of RT-PCR method, scientist turns to chest scan such as CT scans and X-rays as an alternative approach for diagnosis of severe pneumonia caused by SAR-CoV-2 and bacterial pneumonia [38]. Moreover, this approach has its own challenges such as shortage of expert (i.e., radiologist) that can interpret the result and the tediousness of interpreting thousands of CT scan and CXR images. These challenges are addressed by AI-driven models which have shown high efficiency in assisting medical expert in classification and prediction of disease [39,40].
Many studies have reported the use of CXR and CT scans along with DL models in order to achieve automated detection of COVID-19 pneumonia and other types of pneumonia such as non-COVID-19 viral pneumonia and bacterial pneumonia. Moreover, many studies have shown the viability of using TL models which are deep networks pretrained on the ImageNet database for classification of pneumonia from healthy CT scans [41][42][43].

Classification of Multiclass Pneumonia Using AI-Driven Models
The approach of TL in DL is utilized by Chowdhury et al. [17] to differentiate between COVID-19 and viral pneumonia based on a dataset acquired from a public database. The models were trained using 423 COVID-19, 1458 viral pneumonia, and 1579 normal chest X-ray images based on (i) augmentation and (ii) without augmentation. The models achieved higher accuracies, sensitivities, and specificities. A multi-dilation CNN is utilized by Mahmud et al. [44] to classify COVID-19 and other types of pneumonia. The study utilized a deep CNN as COVXNet with modifications based on varying dilation rates for feature extraction, optimization, stacking algorithms, and gradient-based discriminative localization to train dataset containing 1493 non-COVID- 19  In order to show the difference between COVID-19 and community-acquired pneumonia (CAP), Li et al. [45] utilized a three-dimensional DL framework known as COVID-19 detection neural network (COVNet) using 4352 CT scans (1292 of COVID-19, 1735 of CAP, and 1325 normal CT scans). The models achieved 90% sensitivity and 96% specificity for detection of COVID-19 and 87% sensitivity and 92% specificity for detection of CAP. Apostolopoulos et al. [41] utilized TL approach on datasets that contain 1427 X-ray images (504 normal X-ray images, 700 bacterial pneumonia, and 224 COVID-19 X-ray images). The model was able to achieve 96.78% accuracy, 96.46% specificity, and 98.66% sensitivity.

Classification of COVID-19 and Normal X-ray Images Using AI-Driven Models
Abbas et al. [46] utilized a CNN model know as Decompose, Transfer, and Compose (DeTraC) for the classification of COVID-19 using chest X-ray images. The study utilized multiple datasets acquired from different hospitals around the world. The model achieved 95.12% accuracy, 97.91% sensitivity, and 91.87% specificity. Two deeper models are utilized by Narin et al. [42] for the classification of COVID-19 and normal CXR images obtained from public domain. The study utilized 100 images (50:50) and the models achieved 97% accuracy for InceptionV3 and 87% accuracy for Inception-ResNetV2). Moreover, an inception migration-learning model is used by Wang et al. [47] for the classification  The summary of the application of AI for detection of pneumonia such as COVID-19, bacterial pneumonia, non-COVID-19 viral pneumonia, and normal X-ray images is presented in Tables 2 and 3 based on binary classifications and multiclass, respectively (see Table 4).

Methodology
In this section, we presented the proposed approach procedures and its main assumptions. The workflow of the proposed approach is schematically shown in Fig. 2. CXR images are used to train the network using pretrained AlexNet model for classification of (i) COVID-19 and normal (healthy) CXR scans, (ii) bacterial and normal CXR scans, (iii) viral pneumonia and normal CXR scan, (iv) COVID-19 and bacterial CXR scans, (v) COVID-19, bacterial pneumonia, and normal CXR scans, and (vi) COVID-19, bacterial pneumonia, viral pneumonia, and normal CXR scans. TL on DL models has shown to perform efficiently even with small amount of dataset compared with DL models built from scratch which requires large amounts of dataset to reach optimum performance [53].

Dataset
Even though there are more than 30 million confirmed cases of COVID-19 globally, the amount of CT scan images that are available online are very few and limited. As shown in Fig. 3, we obtained COVID-19 pneumonia, non-COVID-19 viral pneumonia, bacterial pneumonia, and normal CXR images from the following website: 1. 153 images from GitHub (https ://githu b.com/ieee8 023/ covid -chest xray-datas et) 2. 219 images from Kaggle (https ://www.kaggl e.com/ tawsi furra hman/covid 19-radio graph y-datab ase). We removed 1 image due to low contrast, making the total number of images 371. We also obtained 1341 normal X-ray images, 1345 non-COVID-19 viral pneumonia 3. 1341 normal, non-COVID-19 viral pneumonia, 4274 bacterial pneumonia from https ://www.kaggl e.com/ sudal airaj kumar /novel -coron a-virus -2019-datas et 4. We obtained CXR images made available by Kermany et al. [54]. The dataset contains three folders (training, validation, and testing with a total number of 5856 positive and negative cases). In each folder, there is a subfolder with names pneumonia and normal folders. The dataset description is based on X-ray images collected from retrospective pediatric patients between the age of 1 and 5. The number of each CXR images used is presented in Table 4.

Model Training
For training of datasets, we employed Matlab installed on personal computer with 64-bit window, 8 GB Random Access Memory (RAM), with an intel ® Core i7-3537U and Graphical Processing Unit (GPU). Seventy percent of the datasets are used for training and 30% for testing (evaluating the model performance) as shown in Table 5. Pretrained AlexNet model is employed due to its high accuracy in  . 2 The complete workflow of the proposed method carrying out feature extraction and image classification. For default settings based on the stochastic gradient descent with momentum, the epoch count has been set to be 20 at most with an initial learning rate of 0.0001 according to [59].

Evaluation and Confusion Matrix
To evaluate the performance of the trained models, three parameters are considered: accuracy, sensitivity, and specificity. Accuracy is termed as the ratio of correctly classified images over the total number of images; it is also termed as the sum of sensitivity and specificity. For evaluating the accuracy and loss of a model, the following formulas are utilized: (1)  Table 6.
True positive rate (sensitivity) is the proportion of positive image samples that are correctly identified as positive sample (i.e., it shows the percentage of positive samples that are correctly identified as positives).  False positive rate (FPR) also known as specificity is the proportion of positive samples that are incorrectly identified as positive samples (i.e., it shows the percentage of negative samples that are incorrectly identified as positives).

Performance Evaluation
The binary classification of COVID-19 vs healthy CXR images, COVID-19 vs non-COVID-19 viral pneumonia, non-COVID-19 viral pneumonia vs healthy CXR images, bacterial pneumonia vs healthy CXR images, three-way classification (COVID-19 vs bacterial pneumonia and healthy CXR images), and four-way classification (COVID-19 viral pneumonia, bacterial pneumonia, non-COVID-19 viral pneumonia, and healthy CXR) are presented in Table 7 and Fig. 4. Moreover, comparison between some of the state-of-the-art approaches with our models is presented in Tables 8 and 9.

Results
The datasets are divided into two: 70% used in training and 30% used for testing. The performances of the models are evaluated based on testing accuracy, sensitivity, and specificity. Initially, a pilot study was carried out using 371 CXR (3) Sensitivity = − TPs TPs + FNs (4) Specificity = − TNs TNs + FPs images each for COVID-19, non-COVID-19, bacterial pneumonia, and healthy images. We obtained low accuracy, sensitivity, and specificity due to low number of datasets. We carried out this study to analyze the linearity of the dataset by using same amount training and testing dataset due to the fact that we have only 371 COVID-19 CXR images. Before we carried out a multiclass classification, we trained each type of pneumonia with healthy (non-pneumonia or noninfected) CXR images. For non-COVID-19 viral pneumonia and healthy datasets, we achieved 94.43% testing accuracy, 98.19% sensitivity, and 95.78% specificity. In terms of bacterial pneumonia and healthy datasets, we achieved 91.43% testing accuracy, 91.94% sensitivity, and 100% specificity. This shows that the model has learned to classify negative images (non-infected/healthy) accurately compared with positive CXR images (bacterial pneumonia). Moreover, the majority of the recent studies focused on COVID-19 pneumonia and non-infected CXR dataset. Our model trained based on COVID-19 pneumonia and non-infected (healthy) CXR images achieved high performance with 99.16% testing accuracy, 97.44% sensitivity, and 100% specificity. The CXR scan images of different types of viral pneumonia are similar, making it hard for radiologist to distinguish COVID-19 with other viral pneumonia. This limitation can lead to misdiagnosis and at the same time can lead to non-COVID-19 viral pneumonia misdiagnosed as COVID-19 pneumonia [17]. To address this limitation, we trained our model to distinguish between COVID-19 pneumonia and non-COVID-19 viral pneumonia. The model achieved 99.62 testing accuracy, 90.63% sensitivity, and 99.89% specificity.
For multiclass dataset, before we train the whole classes, we examine the performance of the model based on threeway classification (COVID-19, bacterial pneumonia, and healthy) to see how the model will perform before integrating non-COVID-19 viral pneumonia. The model achieved low accuracy compared with models trained to distinguish between binary classifications with 94.00% testing accuracy, 91.30% sensitivity, and 84.78% specificity. Based on this result, we hypothesized to achieve lower performance based on four-way classification (COVID-19, non-COVID-19 viral  pneumonia, bacterial pneumonia, and healthy). However, the model (i.e., trained based on four-way classification) achieved a lower accuracy compared with three-way classification in terms of testing accuracy (93.42%) and sensitivity (89.18%) while it achieved a higher specificity (98.92%) compared with three-way classification as shown in Table 7 and Fig. 4.

Comparison with the State-of-the-Art
As shown in Tables 8 and 9, the performances of pretrained AlexNet models are compared with other proposed models. Compared with our work, the study carried out by Li et al. [45] grouped viral and bacterial pneumonia as communityacquired pneumonia (CAP). However, our study disputes this approach; COVID-19 as a viral disease resembles other viral pneumonia. The result we achieved when comparing COVID-19 and other viral pneumonia has shown lower sensitivity and specificity (90.63% and 99.89%, respectively) in comparison with COVID-19 and healthy which achieved 97.44% sensitivity and 100% specificity. Our claim is also supported by Chowdhury et al. [17] who stated that "models performed extremely well when used for classifying COVID-19 and normal images compared to COVID-19 and other viral pneumonia." Both Bai et al. [55] and Narin et al. [42] have also reported high degree of similarity between COVID-19 and other viral pneumonia when considering physiological and clinical prospective. With regards to the classification of COVID-19 and normal CXR images, it can be observed that our model provides significantly a better performance in comparison with studies that utilized a small number of datasets such as [42,44,46,47] and models developed from scratch such as [29]. However, [46] achieved higher sensitivity (i.e., 97.91%) compared with our model (with sensitivity of 97.44%). The impressive performance of the model is attributed to the use of TL based on pretrained models with higher number of layers which have shown to perform efficiently with less amount of data in comparison with models designed from scratch. In terms of classification between non-COVID-19 viral pneumonia and healthy CXR images, several studies utilized same datasets made available by Kermany et al. [54]. The majority of these studies achieved higher performance of above 90% accuracy such as studies carried out by Stephen et al. [49], Saravia et al. [51], and Rajaraman et al. [48]. However, our model achieved result within the same range with 94.43% accuracy.

Conclusion
This work presents the use of deep neural network based on the TL approach (known as a pretrained AlexNet model) for automatic detection of COVID-19 pneumonia, non-COVID-19 viral pneumonia, and bacterial pneumonia. The models were trained based on two binary classes and multiclass (three and four classes). For two binary classifications, each of COVID-19, non-COVID-19 viral pneumonia, and bacterial pneumonia are classified along with healthy CXR images. For multiclass, the models are trained based on (1)  The higher performance achieved for classification of COVID-19 pneumonia and non-COVID-19 viral pneumonia and COVID-19 pneumonia with healthy CXR images has shown that computer-aided detection approach can be used as an alternative or a confirmatory approach against RT-PCR method which has shown to be less sensitive, time consuming, and laborious. One of the limitations of this research is the fact that we used a small dataset of COVID-19 pneumonia. This challenge makes it difficult to generalize our result. In the future, we hope to acquire more dataset and to train the images using deeper neural networks such as pretrained GoogleNet and ResNet. With the relative amount of dataset, cross validation approach can be carried out to evaluate the performance of the model. Moreover, hybrid models have shown to perform better when compared with single models. Combining CNN models with support vector machine (SVM) and support vector regression (SVR) can also improve performance of the model.

Compliance and Ethical Standards
Ethical Approval This article does not contain any studies with human participants performed by any of the authors.