Abstract
Hybrid electric vehicles (HEVs) utilize multiple power sources to minimize fuel consumption, which, generally, comprises one or two electric motors added to the conventional configuration. Based on the power flows from the sources to the wheels, the powertrain configurations are classified into three different types, such as series, parallel, and power-split. Although the classification is helpful for engineers to understand the layout of the system, it might not be useful for analyzing the operation of the system. This study proposes new classification concept, so that the powertrain configurations can be classified into two categories according to the operating mode, as either a variable type or a fixed type, which can be very practical for building mathematical models and analyzing the systems. The mathematical models are developed based on parameters characterizing the operations, and the modeling technique is tested in four real-world hybrid vehicles in order to see the feasibility. The new classification concept brings significant advantages for engineers who want to study hybrid systems because it is possible to accelerate the development process by reusing the generic models even for different powertrain configurations, which can be used for analyzing, evaluating, and optimizing the hybrid powertrain systems.
Similar content being viewed by others
References
Benford, H. L. and Leising, M. B. (1981). The lever analogy: A new tool in transmission analysis. SAE Trans., 429–437.
Cesiel, D. and Zhu, C. (2016). Next generation “Voltee” charging system. SAE Technical Paper No. 2016-01-1229.
Conlon, B. (2005). Comparative analysis of single and combined hybrid electrically variable transmission operating modes. SAE Trans., 1265–1275.
Conlon, B., Barth, M., Hua, C., Lyons, C., Nguy, D. and Palardy, M. (2016). Development of hybrid-electric propulsion system for 2016 Chevrolet Malibu. SAE Int. J. Alternative Powertrains 5, 2, 259–271.
Conlon, B. M., Blohm, T., Harpster, M., Holmes, A., Palardy, M., Tarnowsky, S. and Zhou, L. (2015). The next generateon “Voltec” extended range EV propulsion system. SAE Int. J. Alternative Powertrains 4, 2, 248–259.
Fushiki, S. (2016). The new generation front wheel drive hybrid system. SAE Int. J. Alternative Powertrains 5, 1, 109–114.
Gao, D. W., Mi, C. and Emadi, A. (2007). Modeling and simulation of electric and hybrid vehicles. Proc. IEEE 95, 4, 729–745.
Grewe, T. M., Conlon, B. M. and Holmes, A. G. (2007). Defining the general motors 2-mode hybrid transmission. SAE Technical Paper No. 2007-01-0273.
Higuchi, N., Sunaga, Y., Tanaka, M. and Shimada, H. (2013). Development of a new two-motor plug-in hybrid system. SAE Int. J. Alternative Powertrains 2, 1, 135–145.
Holmes, A., Liu, J., Ames, D., Neelakantan, V., Rahman, K. and Grewe, T. (2016). General motors electric variable transmission for Cadillac CT6 sedan. SAE Technical Paper No. 2016-01-1150.
Inoue, M., Takamatsu, H., Ogami, M., Ninomiya, K., Ito, K. and Shibata, T. (2016). New-structure motor for full hybrid electric vehicle. SAE Technical Paper No. 2016-01-1225.
Ito, Y., Aoki, T., Naito, T. and Hiranishi, T. (2019). Development of motor with heavy rare earth-free magnet for two-motor hybrid system. SAE Int. J. Advances and Current Practices in Mobility 1, 1169–1176.
Jeon, S., Bae, K., Wi, J., Namkoong, C., Goo, C., Lee, J. S., Hwang, S. H. and Kim, H. (2017). Development of shift map for TMED type DCT PHEV in charge sustaining mode considering transmission and motor losses. Trans. Korean Society of Automotive Engineers 25, 3, 367–373.
Jeoung, H., Lee, K. and Kim, N. (2019). Methodology for finding maximum performance and improvement possibility of rule-based control for parallel type-2 hybrid electric vehicles. Energies 12, 10, 1924.
Jurkovic, S., Rahman, K. M. and Savagian, P. (2016). Electric traction motors for Cadillac CT6 plugin hybrid-electric vehicle. IEEE Energy Conversion Cong. Exposition (ECCE). Milwaukee, WI, USA.
Khan, A., Grewe, T., Liu, J., Anwar, M., Holmes, A. and Balsley, R. (2016). The GM RWD PHEV propulsion system for the cadillac CT6 luxury sedan. SAE Technical Paper No. 2016-01-1159.
Kim, N., Cha, S. and Peng, H. (2010). Optimal control of hybrid electric vehicles based on Pontryagin’s minimum principle. IEEE Trans. Control Systems Technology 19, 5, 1279–1287.
Kim, N., Cha, S. W. and Peng, H. (2012). Optimal equivalent fuel consumption for hybrid electric vehicles. IEEE Trans. Control Systems Technology 20, 3, 817–825.
Kim, N. W., Lee, D. H., Zheng, C., Shin, C., Seo, H. and Cha, S. W. (2014). Realization of PMP-based control for hybrid electric vehicles in a backward-looking simulation. Int. J. Automotive Technology 15, 4, 625–635.
Lee, W., Kim, T., Jeong, J., Chung, J., Kim, D., Lee, B. and Kim, N. (2020). Control analysis of a real-world P2 hybrid electric vehicle based on test data. Energies 13, 16, 4092.
Lee, W., Park, J. and Kim, N. (2019). Analysis of transmission efficiency of a plug-in hybrid vehicle based on operating modes. Int. J. Precision Engineering and Manufacturing-Green Technology, 1–11.
Liu, J., Peng, H. and Filipi, Z. (2005). Modeling and analysis of the Toyota hybrid system. TIc 200, 3.
Sciarretta, A., Back, M. and Guzzella, L. (2004). Optimal control of parallel hybrid electric vehicles. IEEE Trans. Control Systems Technology 12, 3, 352–363.
Sen, B., Noori, M. and Tatari, O. (2017). Will Corporate Average Fuel Economy (CAFE) standard help? modeling CAFE’s impact on market share of electric vehicles. Energy Policy, 109, 279–287.
Taniguchi, M., Yashiro, T., Takizawa, K., Baba, S., Tsuchida, M., Mizutani, T., Endo, H. and Kimura, H. (2016). Development of new hybrid transaxle for compact-class vehicles. SAE Technical Paper No. 2016-01-1163.
Wang, S., Chen, K., Zhao, F. and Hao, H. (2019). Technology pathways for complying with Corporate Average Fuel Consumption regulations up to 2030: A case study of China. Applied Energy, 241, 257–277.
Yamamoto, M. (2010). Development of a Toyota plug-in hybrid vehicle. SAE Technical Paper No. 2010-01-0839.
Yang, H., Cho, S., Kim, N., Lim, W. and Cha, S. (2007). Aanalysis of planetary gear hybrid powertrain system part 1: Input split system. Int. J. Automotive Technology 8, 6, 771–780.
Yang, Y., Hu, X., Pei, H. and Peng, Z. (2016). Comparison of power-split and parallel hybrid powertrain architectures with a single electric machine: Dynamic programming approach. Applied Energy, 168, 683–690.
Zhang, X., Li, S. E., Peng, H. and Sun, J. (2016). Design of multimode power-split hybrid vehicles-A case study on the Voltec powertrain system. IEEE Trans. Vehicular Technology 65, 6, 4790–4801.
Zhuang, W., Li, S., Zhang, X., Kum, D., Song, Z., Yin, G. and Ju, F. (2020). A survey of powertrain configuration studies on hybrid electric vehicles. Applied Energy, 262, 114553.
Zhuang, W., Zhang, X., Peng, H. and Wang, L. (2016). Rapid configuration design of multiple-planetary-gear power-split hybrid powertrain via mode combination. IEEE/ ASME Trans. Mechatronics 21, 6, 2924–2934.
Acknowledgement
This work was supported by the Technology Innovation Program (20011834, Development of application technologies for heavy duty fuel cell electric trucks using multi-input motor based 400kW class multi speed electrified powertrain system) funded by the Ministry of Trade, Industry and Energy (MOTIE, Korea), National Research Foundation of Korea (NRF) grant funded by the Ministry of Science & ICT(MSIT) (NRF-2020R1C1C1013037). This research was also supported by Chinese Academy of Sciences PIFI program (2021VEB0001) and Department of Science and Technology of Guangdong Province (Grant No. 2021A0505050005).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Kim, N., Zheng, C., Jeong, J. et al. Generic Representations for Hybrid Powertrain Configurations. Int.J Automot. Technol. 22, 1683–1693 (2021). https://doi.org/10.1007/s12239-021-0145-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12239-021-0145-9