Abstract
Copper, manganese and essentially tin are used as alloying elements for obtaining cast irons with a fully pearlitic matrix in the as-cast state. Addition of tin, at a level of about 0.10-0.15 mass%, seems to be the only practical way for avoiding growth of ferrite in the stable eutectoid reaction and to fully transform the matrix of the material to pearlite in the metastable eutectoid system. While the role of copper and manganese has been previously rationalized, the way tin affects the eutectoid transformation in cast irons is still a matter of debate. The present work makes use of an assessment of the Fe-Sn system and of experimental data in the Fe-C-Sn system to evaluate the effect of tin on phase equilibria in this latter system. One ternary parameter is estimated and the resulting modification is applied to literature data on Fe-C-Si-Sn equilibria. Finally, solid-state phase transformation temperatures are calculated and used to discuss experimental information dealing with pearlitic cast irons. It is proposed that pearlite formation in Sn-bearing cast irons is associated to the transient formation of a Fe3SnC compound which has an ordered FCC structure.
Similar content being viewed by others
References
L. Guerin and M. Gagné, Effect of Mn, Cu and Sn on the Microstructure and Properties of Ductile Iron Castings, Foundryman, 1987, 80, p 334-336
J. Lacaze, J. Sertucha, P. Larrañaga, and R. Suárez, Combined Effects of Copper and Tin at Intermediate Level of Manganese on the Structure and Properties of as-Cast Spheroidal Graphite Cast Iron, Arch. Metall. Mater., 2017, 62, p 833-839
J. Lacaze and J. Sertucha, Effect of Cu, Mn and Sn on Pearlite Growth Kinetics in as-Cast Ductile Irons, Int. J. Cast Metals Res., 2016, 29, p 74-78
J. Sertucha, P. Larrañaga, J. Lacaze, and M. Insausti, Experimental Investigation on the Effect of Copper Upon Eutectoid Transformation of as-Cast and Austenitized Spheroidal Graphite Cast Iron, Int. J. Metalcasting Winter, 2010, 4, p 51-58
J. Lacaze, The Austenite to Pearlite/Ferrite Transformation, ASM Handbook, Vol 1A, 2017, (to appear).
W.C. Johnson and B.V. Kovacs, The Effect of Additives on the Eutectoid Transformation of Ductile Iron, Metall. Trans. A, 1978, 9, p 219-229
B.V. Kovacs, Pearlite Stabilization in Cast Irons, AFS Trans., 1980, 88, p 79-96
V.K. Grigorovich, Influence of Alloying Elements on Cementite Stability and the Graphitization of Cast Irons, Russ. Cast. Product., 1964, 12, p 557-561
E.N. Pan, M.S. Lou, and C.R. Loper, Effects of Cu, Sn, and Mn on the Eutectoid Transformation of Graphitic Cast Irons, AFS. Trans., 1987, 95, p 819-840
K.C. Hari Kumar, P. Wollants, and L. Delaey, Thermodynamic Evaluation of Fe-Sn Phase Diagram, CALPHAD, 1996, 20, p 139-149
J. Miettinen, Reassessed Thermodynamic Solution Phase Data for Ternary Fe-Si-C System, CALPHAD, 1998, 22, p 231-256
J. Lacaze and B. Sundman, An Assessment of the Fe-C-Si System, Metall. Trans. A, 1991, 22, p 2211-2223
H. Nowotny, Strukturchemie Einiger Verbindungen Der Ubergangsmetalle Mit Den Elementen C, Si, Ge, Sn, Phys. Solid State Chem. 5, 1971, 27–70, (in German) (abstract in English).
H.H. Stadelmaier and L.J. Huetter, Ternary Carbides of the Transition Metals Nickel, Cobalt, Iron, Manganese with Zinc and Tin, Acta Metal., 1959, 7, p 415-419
D. Connetable, J. Lacaze, P. Maugis, and B. Sundman, A Calphad Assessment of Al-C-Fe System with the κ Carbide Modelled as an Ordered Form of the fcc Phase, CALPHAD, 2008, 32, p 361-370
Z. Wang, L. Wang, and T. Du, Study of the Thermodynamic Properties of Fe-C-Sn, Fe-C-Pb, Fe-C-Pb-Ce Liquid Solutions, J. Iron Steel Res. Suppl., 1987, 7, p 99–106, (in Chinese) (abstract in English).
N. Imai, T. Tanaka, T. Yuki, T. Iida, and Z.I. Morita, Equilibrium Distribution of Sn Between Solid and Liquid Phases in Fe-Sn and Fe-C-Sn alloys, ISIJ, 1991, 77, p 38–44, (in Japanese) (abstract in English).
T. Tanaka, Ph.D. thesis, Thermodynamics of the Equilibrium Distribution of Solute Elements Between Solid and Liquid Phases in Iron Alloys, Osaka University Knowledge Archive, 1984.
T. Kanno, T. Kikuchi, and I. Kang, Effect of Alloying Elements on the Eutectic Temperatures in Cast Iron, AFS Trans., 2005, paper 05-203.
J. Lacaze, C. Wilson, and C. Back, Experimental Study of the Eutectoid Transformation in Spheroidal Graphite Cast Iron, Scand. J. Metall., 1994, 23, p 151-163
V. Gerval and J. Lacaze, Critical Temperatures of Spheroidal Graphite Cast Irons: A Review of Literature Data, ISIJ Int., 2000, 40, p 386-392
D. Duc, D. Treheux, P. Guiraldenq, B. Lambert, and P. Poyet, Influence du Carbone sur les Structures d’Equilibre du Diagramme Fer-Etain, Application à l’Etude de l’Influence de l’Etain sur la Transformation Perlitique dans les Fontes, Fonderie, 1973, 321, p 89-97
M.J. Lalich and C.R. Loper, Effects of Pearlite-Promoting Elements on the Kinetics of the Eutectoid Transformation in Ductile Cast Irons, AFS Trans., 1973, 81, p 217-228
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lacaze, J., Sertucha, J. Effect of Tin on the Phase Transformations of Cast Irons. J. Phase Equilib. Diffus. 38, 743–749 (2017). https://doi.org/10.1007/s11669-017-0561-8
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11669-017-0561-8