Abstract
Electron beam welding of pre-aged cast 718 produced a slender Laves phase, while welds from solutionized cast 718 exhibited a blocky Laves phase with an initial stage of δ precipitation and formation of γ′+γ″ strengtheners after post weld heat treatment (PWHT). The presence of primary strengthener and coarse Laves particles in PWHT weld may cause reduction of the micro-plastic zone ahead of a crack, leading to a significant decrease in Charpy impact toughness at 77 K (−196 °C).
Similar content being viewed by others
References
D.D. Krueger: Proc. Conf. Superalloy 718-Metallurgy and Applications, E.A. Loria, ed., TMS, Warrendale, PA, 1989, pp. 279–96.
M. Sundararaman, P. Mukhopadhyay, and S. Banerjee: Metall. Trans. A, 1992, vol. 23A, pp. 2015-28.
A. Ulas and E. Boysan: Aerospace Sci. Technol., 2013, vol. 24, pp. 187-97.
W.A. Baeslack III and D.E. Nelson: Metallography, 1986, vol. 19, pp. 371-79.
W.A. Baeslack III, S.L. West and T.J. Kelly: Scripta Metall., 1988, vol. 22, pp. 729-34.
N.L. Richards, X. Huang, and M.C. Chaturvedi: Mater. Charact., 1992, vol. 28, pp. 179-87.
G.A. Knorovsky, M.J. Cieslak, T.J. Headley, A.D. Romig, Jr., and W.F. Hammetter: Metall. Trans. A, 1989, vol. 20A, pp. 2149-58.
A.K. Abdul Jawwad, M. Strangwood, and C.L. Davis: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1237–47.
M.C. Flemings: Solidification Processing, McGraw-Hill, New York, NY, 1974.
J.N. Dupont, C.V. Robino, J.R. Michael, M.R. Notis, and A.R. Marder: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2785-95.
K. Sivaprasad and S.G.S. Raman: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2115-27.
G.D.J. Ram, A. Venugopal Reddy, K.P. Rao, G.M. Reddy, and J.K. Sarin Sundar: J. Mater. Process. Technol., 2005, vol. 167, pp. 73–82.
J.K. Hong, J.H. Park, N.K. Park, I.S. Eom, M.B. Kim, and C.Y. Kang: J. Mater. Process. Technol., 2008, vol. 201, pp. 515-20.
A. Gregori: A Survey of Welding and Repairing of Nickel Superalloys for Gas Turbines, Report No. 13190.01/03/1164.03, The Welding Institute, U.K., August 2003.
D. Cai, W. Zhang, P. Nie, W. Liu, and M. Yao: Mater. Charact., 2007, vol. 58, pp. 220-25.
S. Li, J. Zhuang, J. Yang, Q. Deng, and J. Du: Proc. Conf. Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1994, pp. 545–55.
W.J. Mills: Welding Research Suppl. to Welding J., 1984, pp. 237–45.
This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korean government (MSIP) (NRF-2012M1A3A3A03033460).
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted August 25, 2013.
Rights and permissions
About this article
Cite this article
Bae, SH., Kwon, SI., Yoon, JG. et al. Effect of Post Weld Heat Treatment on Cryogenic Mechanical Properties of Electron Beam Welded Cast Inconel 718. Metall Mater Trans A 45, 537–542 (2014). https://doi.org/10.1007/s11661-013-2133-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-013-2133-9