Abstract
Masks are face coverings that give protection from infectious agents, airborne pathogens, bacteria, viruses, surgical fog, dust, and other chemical hazards by acting as a barrier between the wearer and the environment. In the COVID-19 pandemic, this major personal protective equipment’s became essential part of our daily life. The aim of this review is to analyze and discuss the different types of masks with their pros and cons, manufacturing procedures, evaluation criteria, and application with some of the sterilization process for reuse and smart mask. The review used a thorough examination of the literature to analyze the preventive effects of surgical, N95, smart mask, and potential environmental damage from those masks. Several studies and evidence were also examined to understand the efficiency of different mask on different environment. N95 respirators are capable of filtering out non-oil-based 95% air-born particles, and surgical masks act as a protective barrier between the wearer and the environment. The application of spoon bond and melt blown techniques in the fabrication process of those masks improves their protective nature and makes them lightweight and comfortable. But the high demand and low supply forced users to reuse and extend their use after sterilizations, even though those masks are recommended to be used once. Universal masking in the SARS-COV-2 pandemic increased the chance of environmental pollution, so the application of smart masks became essential because of their high protection power and self-sterilizing and reusing capabilities.
Graphical abstract
Similar content being viewed by others
Data availability
This submitted article contains all of the data generated or analyzed during this investigation.
Abbreviations
- WHO:
-
World Health Organization
- PPE:
-
Personal protective equipment
- SARS-CoV-2:
-
Severe acute respiratory syndrome coronavirus 2
- FDA:
-
Food and drug administration
- ASTM:
-
American society of testing and materials
- CDS:
-
Center for disease control and prevention
- NIOSH:
-
National institute for occupational safety and health
- OSHA:
-
The occupational safety and health administration
- BFE:
-
Bacterial filtration efficiency
- PFE:
-
Particulate filtration efficiency
- VFE:
-
Viral filtration efficiency
References
Adyel TM (2020) Accumulation of plastic waste during COVID-19. Science 369(6509):1314–1315
Ahmad MDF, Wahab S, Ali Ahmad F, Intakhab Alam M, Ather H, Siddiqua A et al (2021) A novel perspective approach to explore pros and cons of face mask in prevention the spread of SARS-CoV-2 and other pathogens. Saudi Pharm J 29(2):121–133
Anastopoulos I, Pashalidis I (2021) Single-use surgical face masks, as a potential source of microplastics: do they act as pollutant carriers? J Mol Liq 326:115247
ASTM, F2101–19 (2019) Standard test method for evaluating the bacterial filtration efficiency (BFE) of medical face mask materials, using a biological aerosol of Staphylococcus aureus, ASTM International, West Conshohocken, PA, USA
Baker SB, Xiang W, Atkinson I (2017) Int. of things for smart healthcare: technologies, challenges, and opportunities. IEEE Acc 5:26521–26544
Bayersdorfer J, Giboney S, Martin R, Moore A, Bartles R (2020) Novel manufacturing of simple masks in response to international shortages: bacterial and particulate filtration efficiency testing. Am J Infect Control 48:1543–1545
Bergman MS, Viscusi DJ, Zhuang Z, Palmiero AJ, Powell JB, Shaffer RE (2012) Impact of multiple consecutive donnings on filtering facepiece respirator fit. Am J Infect Control 40(4):375–380
Bhardwaj J, Hong S, Jang J, Han C-H, Lee J, Jang J (2021) Recent advancements in the measurement of pathogenic airborne viruses. J Hazard Mater 420:126574
Binka M, Adu PA, Jeong D, Vadlamudi NK, Velásquez García HA, Mahmood B, Buller-Taylor T et al (2023) The impact of mask mandates on face mask use during the COVID-19 pandemic: longitudinal survey study. JMIR Public Health Surveill 9:e42616
Bradford Smith P, Agostini G, Mitchell JC (2020) A scoping review of surgical masks and N95 filtering facepiece respirators: learning from the past to guide the future of dentistry. Saf Sci 131:0925–7535
Brooks JT, Butler JC (2021) Effectiveness of mask wearing to control community spread of SARS-CoV-2. JAMA 325(10):998–999
Cheng Y, Wang C, Zhong J, Lin S, Xiao Y et al (2017) Electrospun polyetherimide electret nonwoven for bi-functional smart face mask”. Nano Ener 34:562–569
Das O, Neisiany RE, Capezza AJ, Hedenqvist MS, Försth M, Xu Q et al (2020) The need for fully bio-based facemasks to counter coronavirus outbreaks: a perspective. Sci Total Environ 736:139611
Das S, Sarkar S, Das A, Das S, Chakraborty P, Sarkar J (2021) A comprehensive review of various categories of face masks resistant to Covid-19. Clin Epidemio Glob Health 12:100835
Dutton K (2008) Overview and analysis of the melt blown process and parameters. J Text Appar Technol Manag 6(1)
Elamin MY, Maslamani YA, Muaddi MA, Alameer AA, Alqassim AY, Doweri AA et al (2023) Real-world effectiveness of COVID-19 vaccines: a retrospective cohort study of vaccinated individuals in Jazan. Saudi Arabia J Infect Public Health 16(9):1512–1517
Farzaneh S, Shirinbayan M (2022) Processing and quality control of masks: a review. Polymers, Polymer Materials in Additive Manufacturing: Modelling and Simulation 14(2):291
Feldmann F, Shupert WL, Haddock E, Twardoski B, Feldmann H (2019) Gamma radiation as an effective method for inactivation of emerging viral pathogen. Am j Trop Med Hyg 10:1275–1277
Fennelly KP (2020) Particle sizes of infectious aerosols: implications for infection control. Lancet Respir Med 8(9):914–924
Ferraro G, Failler P (2020) Governing plastic pollution in the oceans: institutional chal- lenges and areas for action. Environ Sci Policy 112:453–460
Fisher EM, Shaffer RE (2014) Considerations for recommending extended use and limited reuse of filtering facepiece respirators in health care settings. J Occup Environ Hyg 11(8):D115–D128
Glukhikh V, Buryndin P, Artyemov A, Savinovskih A, Krivonogov P, Krivonogova A et al (2020) Plastics: physical-and-mechanical properties and biodegradable potential. Foods Raw Mater. 8:149–154
Grinshpun SA, Haruta H, Eninger RM, Reponen T, McKay RT, Lee SA (2009) Performance of an N95 filtering facepiece particulate respirator and a surgical mask during human breathing: two pathways for particle penetration. J Occup Environ Hyg 6(10):593–603
Gupta M, Gupta K, Gupta S (2020) The use of facemasks by the general population to prevent transmission of Covid 19 infection: a systematic review. MedRxiv. https://doi.org/10.1101/2020.05.01.20087064
Haque MS, Sharif S, Masnoon A, Rashid E (2021) SARS-CoV-2 pandemic-induced PPE and single-use plastic waste generation scenario. Waste Manag Res 39:3–17
Hohlfeld BI, Preissler G, Jauch KW et al (2008) Surgical smoke and ultrafine particles”. J Occup Med Toxicol 3:31
Jarkko H, Dasanayake H, Hannu J, Schuss C, Rajanen M (2022) Smart mask – wearable IoT solution for improved protection and personal health. Intern of Things 18:100511
Jonathan Szalajda MS, Jeffrey O, Stull MS, Lisa M, Brosseau CIH (2021) Overview of The ASTM F3502–21 barrier face covering standard. Centers for disease control and prevention, CDC
Kähler CJ, Hain R (2020) Fundamental protective mechanisms of face masks against droplet infections. J Aerosol Sci 148:105617
Khayan K, Anwar T, Wardoyo S, Puspita WL (2021) Respiratory mask using a combination of spunbond, meltblown, and activated carbon materials for reducing exposure to CO: an in vivo study. Environ Sci Pollut Res 28:18989–18994
Kisielinski K, Giboni P, Prescher A, Klosterhalfen B, Graessel D, Funken S et al (2021) Is a mask that covers the mouth and nose free from undesirable side effects in everyday use and free of potential hazards? Int J Environ Res Public Health 18(8):4344
Konda A, Prakash A, Moss GA, Schmoldt M, Grant GD, Guha S (2020) Aerosol filtration efficiency of common fabrics used in respiratory cloth masks. ACS Nano 14:6339–6347
Kutralam-Muniasamy G, Perez-Guevara F, Shruti VC (2022) A critical synthesis of current peer-reviewed literature on the environmental and human health impacts of COVID-19 PPE litter: new findings and next steps. J Hazard Mater 422:126945
Lee S, Cho AR, Park D, Kim JK, Han KS, Yoon IJ et al (2019) Reusable polybenzimidazole nanofiber membrane filter for highly breathable PM2.5 dust proof mask. ACS Appl Mater Interfaces 11:2750–2757
Li L, Zhao X, Li Z, Song K (2021) COVID-19: performance study of microplastic inhalation risk posed by wearing masks. J Hazard Mater 411:124955
Liang M, Gao L, Cheng C, Zhou Q, Uy JP, Heiner K, Sun C (2020) Efficacy of face mask in preventing respiratory virus transmission: a systematic review and meta-analysis. Travel Med Infect Dis 36:1477–8939
Liao M, Liu H, Wang X, Hu X, Huang Y, Liu X, Lu JR (2021) A technical review of face mask wearing in preventing respiratory COVID-19 transmission. Curr Opin Colloid Interface Sci 52:101417
Lim BH (2010) A review of spun bond process. J Text Appar Techno Manag 6:1–13
Long Y, Hu T, Liu L, Chen R, Guo Q, Yang L, Du L (2020) Effectiveness of N95 respirators versus surgical masks against influenza: a systematic review and meta-analysis. J Evid-Based Med 13(2):93–101
Łowkis B, Motyl E (2001) Electret properties of polypropylene fabrics. J Electrostat 51(52):232–238
Lucia M, Vanja K, Matjaz V, Ciara H, Helena M et al. (2021) Face masks during the COVID-19 pandemic: a simple protection tool with many meanings, Public health 8
Ma Q, Shan H, Zhang H, Li G, Yang R, Chen J (2020) Potential utilities of mask-wearing and instant hand hygiene for fighting SARS-CoV-2. J Medi Virology 92(9):1567–1571
Ma J, Chen F, Xu H, Jiang H, Liu J, Li P et al (2021) Facemasks as a source of nanoplastics and microplastics in the environment: quantification, characterization, and potential for bioaccumulation. Environ Pollut 288:117748
MacIntyre CR, Chughtai AA, Rahman B, Peng Y, Zhang Y, Seale H, Wang Q (2017) The efficacy of medical masks and respirators against respiratory infection in healthcare workers. Influenza Other Respir Viruses 11(6):511–517
Manufacturers of Face Masks (2020) FDA, April 24. To, Manufacturers of Face Masks
Masna NVR, Dizon R, Bhunia S (2021) Smart and connected mask for protection beyond the pandemic: (Invited Paper). IEEE International Midwest Symposium on Circuits and Systems (MWSCAS), 676–679
Matuschek C, Moll F, Fangerau H et al (2020) Face masks: benefits and risks during the COVID-19 crisis. Eur J Med Res 25:32
McEvoy B, Rowan NJ (2019) Terminal sterilization of medical devices using vapourized hydrogen peroxide: a review of current methods and emerging opportunities. J Appl Microbiol 127(5):1403–1420
Midha V, Dakuri A (2017) Spun bonding technology and fabric properties: a review. J Textile Eng Fashion Techno 1(4):126–133
Moyer ES, Bergman MS (2012) Electrostatic N-95 respirator filter media efficiency degradation resulting from intermittent sodium chloride aerosol exposure. App Occup Environ Hyg 15:600–608
Nair LS, Laurencin CT (2007) Biodegradable polymers as biomaterials. Prog Polym Sci 32:762–798
Noti JD, Lindsley WG, Blachere FM, Cao G, Kashon ML, Thewlis RE et al (2012) Detection of infectious influenza virus in cough aerosols generated in a simulated patient examination room. Clin Infect Dis 54(11):1569–1577
Pal K, Kyzas ZG, Kralj S, de Souza FG (2021) Sunlight sterilized, recyclable and super hydrophobic anti-COVID laser-induced graphene mask formulation for indelible usability. J Mol Struct
Pan L, Wang C, Jin H, Li J, Yang L, Zheng Y, Wen Y et al (2020) Lab-on-mask for remote respiratory monitoring. ACS Mater Lett 2(9):1178–1181
Pandit P, Maity S, Singha K, Annu UM, Shekh M, Ahmed S (2021) Potential biodegradable face mask to counter environmental impact of Covid-19. Clean Eng Technol 4:100218
Pourdeyhimi B (2020) Surgical mask particle filtration efficiency (PFE). J Sci Med 2:1–11
Rafique Q, Rehman A, Afghan MS, Ahmad HM, Zafar I, Fayyaz K, Ain Q et al (2023) Reviewing methods of deep learning for diagnosing COVID-19, its variants and synergistic medicine combinations. Comput Biol Med 163:107191
Rana R, Kant R, Huirem RS, Bohra D, Ganguly NK (2022) Omicron variant: current insights and future directions. Microbiol Res 265(2022):127204
Rohit A, Rajasekaran S, Shenoy S, Rai S, Iddya K, Dorairajan SK (2021) Processing of N95 mask: experience from a resource-limited setting in India. Int J Infect Dis 104:41–44
Saberian M, Li J, Kilmartin-Lynch S, Boroujeni M (2021) Repurposing of COVID-19 single use face masks for pavements base/subbase. Sic Total Env 769:145527
Sangkham S (2020) Face mask and medical waste disposal during the covid-19 pandemic in Asia, case Stud. Chem Env Eng 2:100052
Selvaranjan K, Navaratnam S, Rajeev P, Ravintherakumaran N (2021) Environmental challenges induced by extensive use of face masks during COVID-19: a review and potential solutions. Environ Challenges 3:100039
Shakya KM, Noyes A, Kallin R, Peltier RE (2017) Evaluating the efficacy of cloth facemasks in reducing particulate matter exposure. J Expo Sci Environ Epidemiol 27(3):352–357
Shi W, Dustdar S (2016) The promise of edge computing. Computer 49:78–81
Silva ALP, Prata JC, Walker TR, Campos D, Duarte AC, Soares AMVM et al (2020) Rethinking and optimising plastic waste management under COVID-19 pandemic: policy solutions based on redesign and reduction of single-use plastics and personal protective equipment. Sci Total Environ 742:140565
Tcharkhtchi A, Abbasnezhad N, Zarbini Seydani M, Zirak N, Farzaneh S, Shirinbayan M (2021) An overview of filtration efficiency through the masks: mechanisms of the aerosols penetration. Bioact Mate 6(1):106–122
Thomas S, McCubbin P (2003) A comparison of the antimicrobial effects of four silver-containing dressings on three organisms. J Wound Care 12(3):101–107
Tian S, Yang W, Grange J M L, Wang P, Huang W, Ye Z (2019) Smart healthcare: making medical care more intelligent. Glob Health J 3(3)
Tian Y, Tu X, Zhou X, Yu J, Luo S, Ma L et al (2020) Wearing a N95 mask increases rescuer’s fatigue and decreases chest compression quality in simulated cardiopulmonary resuscitation. Amer J Emer Med 44:434–438
Ueki H, Furusawa Y, Iwatsuki-Horimoto K, Imai M, Kabata H, Nishimura H et al (2020) Effectiveness of face masks in preventing airborne transmission of SARS-CoV-2. mSphere 5(5):e00637-20
Ulmer BC (2008) The hazards of surgical smoke. AORN J 87(4):721–734
Valdiglesias V, Laffon B (2020) The impact of nanotechnology in the current universal COVID-19 crisis. Let’s not forget nanosafety! Nanotoxicology 14:1013–1016
Van Doremalen N, Bushmaker T, Morris DH, Holbrook MG, Gamble A, Williamson BN et al (2020) Aerosol and surface stability of SARS-CoV-2 as compared with SARS-CoV-1. N Engl J Med 382(16):1564–1567
Vanapalli KR, Sharma HB, Ranjan VP, Samal B, Bhattacharya J, Dubey BK et al (2021) Challenges and strategies for effective plastic waste management dur- ing and post COVID-19 pandemic. Sci Total Environ 750:141514
Wang QY, Sun JY, Yu HW, Yang XT, Yue J, Hu NW (2021) Laboratory versus field soil aging: impacts on cadmium distribution, release, and bioavailability. Sci Total Environ 779:146442
Wang Z, An C, Chen X, Lee K, Zhang B, Feng Q (2021) Disposable masks release microplastics to the aqueous environment with exacerbation by natural weathering. J Hazard Mater 417:126036
Wu PF, Lia JP, Lua XC, Tang YY, Cai ZW (2022) Release of tens of thousands of microfibers from discarded face masks under simulated environmental conditions. Sci Total Environ 806:150458
Yang Q, Li H, Shen S, Zhang G, Huang R, Feng Y et al (2018) Study of the micro-climate and bacterial distribution in the dead space of n95 filtering face respirators. Sci Rep 8(1):17382
Yang Y, Liu W, Zhang Z, Grossart H-P, Gadd GM (2020) Microplastics provide new microbial niches in aquatic environments. Appl Microbiol Biotechnol 104:6501–6511
Zeng B, Gao L, Zhou Q et al (2022) Effectiveness of COVID-19 vaccines against SARS-CoV-2 variants of concern: a systematic review and meta-analysis. BMC Med 20:200
Acknowledgements
The authors are highly obliged to the Department of Pharmacy, Central University of South Bihar and Department of Bioscience and Biotechnology, Banasthali Vidyapith for boosting authors to upgrading their knowledge of the present work.
Author information
Authors and Affiliations
Contributions
Shovan Ghosh and Akash Patel did the review of literature and wrote the whole manuscript. Vivek Dave, Prashansa Sharma, and Arindam Kuila planned the work and revised the manuscript.
Corresponding author
Ethics declarations
Ethical approval
Not applicable.
Consent to participate
Not applicable.
Consent for publication
Not applicable.
Competing interests
The authors declare no competing interests.
Additional information
Responsible Editor: Lotfi Aleya
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Highlights
• To get information about face mask and their potential to minimize the entry of airborne pathogen.
• Knowledge about significant mask kinds, and their components and manufacturing and filtration processes.
• Global influence of different masks in COVID-19 pandemic along with others airborne disease.
• Highlights of smart mask having high protection power and self-sterilizing.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Ghosh, S., Dave, V., Sharma, P. et al. Protective face mask: an effective weapon against SARS-CoV-2 with controlled environmental pollution. Environ Sci Pollut Res (2023). https://doi.org/10.1007/s11356-023-30460-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11356-023-30460-5