China’s Monetary Policy and the Loan Market: How Strong is the Credit Channel in China?

We study the macroeconomic relevance of credit supply effects in the transmission of Chinese monetary policy. Using combinations of zero and sign restrictions in a structural vector autoregressive framework, we simultaneously identify monetary policy shocks and supply dynamics in the loan market. Our results show that policy shocks which coincide with loan supply effects account for roughly 60% of the overall effects of policy induced output dynamics. Moreover, we find that it takes roughly one year that banks adjust their lending strategies and loan supply effects unfold completely. Overall, our results provide robust empirical evidence that the credit channel constitutes an important and economically relevant transmission channel for monetary policy in China.


Introduction
Over the last twenty years China's economy has experienced a steady transition to become more market-orientated. In this process, China's monetary policymakers have moved away from reliance on direct controls of credit markets to more marketbased monetary policy measures (Fernald et al. 2014). According to the credit channel literature, changes in these newer policy measures (e.g. benchmark rates and 1 3 reserve requirements) influence the supply of bank loans and thereby amplify the effects on the economy (Bernanke and Blinder 1988;Bernanke and Gertler 1995;Disyatat 2011;Kishan and Opiela 2012). In this paper we evaluate how marketbased monetary policy shocks propagate through the loan market and quantify to what extent loan supply ultimately affects the Chinese economy.
In the analysis we propose a novel identification strategy which allows us to simultaneously identify monetary policy and loan supply at the aggregate level. Specifically, we fit structural vector autoregressive models with monthly Chinese data and combine block-recursive zero restrictions with sign restrictions. The zero restrictions identify a block of policy shocks, which is consistent with the standard recursive assumption that monetary policy responds immediately to macroeconomic aggregates, such as prices and output, but affects the relevant variables with a lag (Christiano et al. 1999;Ramey 2016). 1 Within this policy-block, however, we only impose sign restrictions and thus are able to distinguish between policy shocks linked to supply or demand dynamics in the loan market. Consider, for instance, a contractionary monetary policy shock. When loan supply effects dominate the transmission of monetary policy shocks, the supply curve of loans shifts inwards. In such a case, we should observe that prices of loans increase while volumes decline. In contrast, when a monetary tightening primarily coincides with a decline in loan demand, we should observe that both prices and volumes of loans decline. Hence, by imposing sign restrictions on the responses of the loan rate and loan volumes, we are able to disentangle policy shocks linked to either supply or demand dynamics in the loan market. 2 We find that the overall effects of market-based monetary policy shocks account for up to 20% of the forecast variance of Chinese output after two years. The magnitude of these effects is in line with existing empirical evidence and supports the view that market-based policy measures have become effective instruments in the efforts of the People's Bank of China to influence the economy (Chen et al. 2017;Fernald et al. 2014;Kamber and Mohanty 2018). Monetary policy shocks that coincide with loan supply dynamics account for at least 60% of the overall effects on output, after two years. Moreover, we find that the transmission effects via loan supply increase during the first year, suggesting that it takes some time for banks to re-negotiate exiting loan contracts and adjust their lending strategies. Overall, our results provide empirical evidence for an economically relevant credit channel of monetary policy in China.
This paper contributes to the literature by providing an aggregate perspective of the credit channel in China. Thus, our results complement studies that evaluate Chinese monetary policy at the aggregate level (Chen et al. 2017;Fernald et al. 2014;Kamber and Mohanty 2018) by explicitly identifying loan supply dynamics. Furthermore, our analysis relates to a small group of studies that evaluate loan supply responses using 1 3 China's Monetary Policy and the Loan Market: How Strong is the… micro-level data. This alternative approach, originally proposed by Kashyap and Stein (1995) for the U.S., builds on the idea that loan supply responds asymmetrically across banks to a shift in monetary policy, depending on the ability of banks to absorb the policy shock, while loan demand responds independently from these characteristics. Gunji and Yuan (2010) study whether loan growth responds asymmetrically across banks depending on their solvency. Their findings are mixed, providing no clear support for loan supply responses. Fungáčová et al. (2016) show that in response to policy changes the growth rate of loans depends on bank ownership structure rather than bank creditworthiness. Their results suggest that loan supply effects might be present through a China specific ownership channel. Hou and Wang (2013) conclude that increased financial deregulation in China generally decreases the transmission of Chinese monetary policy through the supply of loans. In contrast to these studies, we evaluate loan supply effects using a macroeconomic framework. In this way, we are able to identify loan supply independently from any specific bank characteristics and quantify the transmission effects at the aggregate level.
The remainder of the paper is structured as follows. In Section 2 we provide a short overview of Chinese monetary policy. Section 3 describes the empirical model, the identification approach and the data. Section 4 presents our main findings, and robustness exercises are summarized in Section 5. Section 6 concludes.

Chinese Monetary Policy
Monetary policy in China is unlike that of developed economies. The People's Bank of China (PBoC) uses a large monetary policy toolbox in pursuit of its overarching monetary policy objective of maintaining "the stability of the value of the currency and thereby promote economic growth" (Law of the People's Republic of China on the People's Bank of China I:3 §). 3 Currency stability is interpreted to cover both domestic price stability and external exchange rate stability. In addition to the target stated in the law, the PBoC's other policy objectives include full employment, financial market stability, support of certain sectors or geographical areas, and stability in the balance of payments.
The policy instruments used to achieve these multiple policy objectives include both quantity-and price-based instruments, as well as non-market-based moral suasion policies. China's monetary policy transition into a more market-oriented framework started in 1998 with the abolition of direct credit controls. The PBoC today retains some control over commercial bank lending through window guidance policies, whereby the central bank advises banks directly on the quantity and structure of their lending. 4 The composition of the PBoC's monetary toolbox during our estimation period includes benchmark interest rates, bank reserve requirements, open market operations, central bank lending, and window guidance policies. Changes in PBoC policy stance are often implemented with several policy tools at the same time.
Given the range of available policy instruments, we narrow our analysis to the most important market-based policy measures that potentially relate to loan supply effects (see Bernanke and Blinder 1988;Disyatat 2011;Kishan and Opiela 2012) and study the reserve requirement ratio (RRR), the benchmark deposit rate, and the benchmark lending rate. During our October 2004-June 2016 estimation period, reserve requirements and benchmark interest rates were the most prominent and frequently adjusted policy instruments. Notably, the PBoC uses the RRR as an active policy instrument for macroeconomic stabilization. The sophistication of the RRR framework has increased over time to become the central bank's preferred policy instrument. The reserve requirement ratio was adjusted 44 times between October 2004 and June 2016. In comparison, the benchmark lending rate was changed 27 times and deposit rate adjusted 25 times (see Fig. 1). After 2016, and with the abolishment of the requirement that commercial banks need to follow the benchmark rates, the PBoC has relied more on targeted policy measures such as various lending programs and targeted reserve requirement changes.
To make the RRR a more targeted tool, RRRs were differentiated for various types of banks in 2008. In 2011, the PBoC adopted a "dynamically differentiated RRR" scheme in which the RRRs for individual banks considered, e.g. the credit portfolio, soundness, and systemic importance of the bank (PBC 2012). 5 Our analysis uses the average of the three RRRs as shown in Fig. 1.
Incremental interest-rate deregulation in China started in 1996 (see Table A.5 in Appendix 1). Prior to 2004, banks were allowed to add only small surcharge to the corresponding benchmark lending rate. In October 2004, the lending rate ceiling and deposit rate floor were removed, allowing banks to freely charge higher rates on loans to their customers and offer lower deposit rates compared to the benchmarks. Commercial bank lending rates were liberalized in 2013. In October 2015, the PBoC removed the final ceiling of banks deposit rates. 6 Despite being liberalized on paper, up until 2020 commercial banks still used the benchmark rates as reference in their loan pricing. The PBoC still publishes the benchmark rates, even though the levels have been unaltered since 2015. 7 As we describe in detail below, we exploit the lending rate of banks to distinguish between supply and demand dynamics in the loan market. Hence, the interest-rate deregulation provides insight into whether banks adjust the supply of bank loans in response to changes in monetary policy.
Finally, while the PBoC still operates in less developed financial environment than other major central banks, the loan market is the major source of funding for firms and households in China. Thus, the credit channel is likely to play a relevant role for the transmission of Chinese monetary policy. In 2016, almost 70% of new financing provided to non-bank corporate sector and households was provided in the form of bank loans. 8

Estimation
We evaluate the transmission effects of Chinese monetary policy using a structural vector autoregressive approach. As the reliability of Chinese aggregates on economic activity and prices are difficult to verify, we follow the literature and use a broad set of economic activity and price indicators to measure Chinese output and inflation (see Fernald et al. 2015Fernald et al. , 2014He et al. 2013). We estimate a factor-augmented vector autoregression (FAVAR) in the spirit of Bernanke et al. (2005), treating the latent output and inflation factors as observable variables. 9 The model is specified as follows: where F t captures the output and inflation factor, and X t consists of the observable variables including a policy measure, the growth rate of loans, and an average  Bernanke et al. (2005) show that treating estimated factors as data provides results consistent with estimates from Bayesian methods that consider the uncertainty involved with the estimated factors.
lending rate. The variables appear in the same ordering in the estimation. A j are matrices containing the reduced-form coefficients, and e t is a vector of white noise reduced-form residuals with E(e t ) = 0 and Σ e = E(e t e � t ). Following Fernald et al. (2014), we extract the output and price factors using a principal component analysis on a broad set of economic activity and price indicators, respectively. The algorithm follows Stock and Watson (1998) and imputes missing data observations iteratively.
In line with the standard approach in the sign-restriction literature, we estimate the reduced-form model in Eq. 1 with Bayesian methods using an uninformative Normal-Inverse-Wishart prior for the coefficients and the variance-covariance matrix. The reduced-form posterior distribution (also a Normal-Wishart density) is derived analytically using the estimates of A j and Σ e as location parameters (see Uhlig 1994). However, as we impose sign restrictions, our system is set-identified and thus, we are not necessarily uninformative over the structural coefficients (Baumeister and Hamilton 2015;Moon and Schorfheide 2012). Applying the Bayesian (or Schwarz) information criterion, we use p = 2 lags in our baseline estimation.

Identification
To identify monetary policy shocks associated with loan supply or loan demand responses, we combine a block-recursive identification approach with sign restrictions. With the contemporaneous zero restriction, we impose the notion (consistent with a standard Taylor rule) that monetary policy (MP) responds simultaneously to changes in economic activity (EA) and prices (PR), but influences such variables only with a lag (Christiano et al. 1999;Ramey 2016). 10 While this recursive assumption is frequently imposed to study Chinese monetary policy (see e.g. He et al. 2013;Fernald et al. 2014) it may not cover the entire variety of different monetary policy tools in China.
To distinguish among the various dynamics of the loan market in response to policy shocks, we allow for contemporaneous effects between the policy variable and loan market variables. Thus, the monetary policy shock is not exactly identified and sign restrictions can be imposed to identify policy shocks with specific dynamics on the loan market. Specifically, we identify a contractionary monetary policy shock that coincides with a decrease in the supply of loans (MP Loan Supply) and another policy shock that is linked to a decline in the demand for loans (MP Loan Demand). 11 Table 1 summarizes the identification restrictions. We normalize both policy shocks to be contractionary by imposing a positive response on the policy variable. The restrictions on the average loan rate and loan growth rate in case of policy shocks linked to loan supply responses are consistent with the idea that an inward shift of the supply curve of loans implies a decline of loan volumes and an increase in the price of loans. When monetary policy shocks coincide with loan demand effects, we require that volumes and prices of loans decline simultaneously. This is consistent with an inward shift of the demand curve of loans. 12 All remaining loanmarket dynamics that coincide with an increase in the policy rate are captured by the third residual shock.
Having allowed for the contemporaneous effects between the loan market variables and the policy measure, how do we distinguish between monetary policy shocks and loan market shocks? According to the empirical literature, which evaluates exogenous loan supply shocks (see e.g. Bijsterbosch and Falagiarda 2015;Gambetti and Musso 2017;Hristov et al. 2012), an expansionary monetary policy response is expected in the event of a contractionary loan supply shock. While loan demand shocks are typically not separately identified, they are interpreted as aggregate demand shocks. Thus, monetary policy is expected to show an expansionary response to contractionary loan demand shocks. As the policy rate increases in our identification, we can rule out that the identified monetary policy shocks are driven by exogenous loan-market dynamics. Put differently, the imposed sign restrictions imply that the identified dynamics on the loan market represent endogenous responses to policy shocks.
To implement our identification approach, we loosely follow the model selection algorithm proposed by Arias et al. (2018). The reduced form model is transformed with a random matrix Q obtained recursively such that the zero restrictions hold by construction and QQ� = I . To obtain a distribution of accepted draws, we draw 3,000 models from the reduced-form posterior distribution and check a maximum of 1,000 Q-transformations for each draw. 13 Table 1 Zero and sign restrictions on impulse response functions Notes: Sign restrictions hold on impact and the subsequent period; zero restrictions hold contemporaneously. 'EA' stands for economic activity, 'PR' for prices, and 'MP' for monetary policy. For the economic activity (EA) and price (PR) factors we use the first principal components of a broad set of economic activity and price indicators, respectively. All variables are described in detail in Section 3.  Hristov et al. 2012), and distinguish between supply and demand effects in the oil market (Kilian and Murphy 2014;Cashin et al. 2014) and the broad money market (Chadha et al. 2010). Unlike these studies, we do not identify exogenous supply or demand shocks. Instead, we identify policy shocks that coincide with endogenous changes in the demand or supply of bank loans. 13 Please refer to Arias et al. (2018) for technical details.

Data
We use monthly data ranging from October 2004 to June 2016 for the estimation. The observation period is determined by data availability. Specifically, the average lending rate cannot be constructed before our starting date, as restrictions on lending rate ceiling were still at place (see Table A.5). 14 All data are taken from the CEIC China Premium Database.
To extract the economic activity (EA) and the price (PR) factors use a broad set of Chinese economic indicators. 15 Figure 2 shows the estimated factors and Table A.6 in Appendix 1 lists all variables. The wide EA factor is constructed with all economic activity measures, while the narrow EA factor is constructed with a small subset of economic activity measures. EA factors are correlated with industrial production, but not to the same extent. In the baseline, we follow the data transformation suggested in Fernald et al. (2014), i.e. we seasonally adjust the level variables, take monthly growth rates (first-log differences times 100), and remove local trends from each time-series by applying a biweight filter (see also Stock and Watson 2012) . In the robustness analysis, we consider different biweight parameters and unfiltered data.
As policy instruments, we consider a quantity-based measurement, the average reserve requirement ratio (RRR), and two price-based measurements: the one-year lending benchmark rate (LBR) and the one-year deposit benchmark rate (DBR). As there is little variation between the two benchmark rates (see Fig. 1), we only present the results for the one-year deposit benchmark rate. The results for the lending benchmark rate are quite similar and provided in Appendix 2.
The loan volume variable is the total banking sector loan stock in domestic currency available from the PBoC monthly financial statistics. Loan growth (LNGR) is the month-on-month change in the total loan stock. As with the factor variables, we remove in our baseline local means by applying a biweight filter.
As the PBoC only began to report the average banking sector lending rate in late 2008 and only in quarterly frequency (see PBoC AVLR in Fig. 3), we exploit monthly statistics of the share of loans priced above or below the benchmark lending rate. Specifically, we construct the average lending rate (AVLR t ) as follows: where LNR t captures the short-term benchmark lending rate (see LBR in Fig. 4), CHANGE i represents the surcharge or discount that is classified in K categories, with i = 1, 2, … , K , and SHARE i,t captures the share of banks setting their lending rate according to one of the respective categories. 16 To construct the average lending rate from October 2004 onwards we accept that until 2008 the shares of loans After 2016 the PBoC has relied on more targeted monetary policy measures, including targeted cuts in RRR, for which data is not available as they are not reflected in the headline rate. 15 The selection of variables follows Fernald et al. (2014). 16 For the category with the largest surcharge, we assume a markup of 100% in the baseline estimation. priced above/below its benchmark rate are only reported on a quarterly frequency. 17 In Fig. 3, we compare our constructed lending rate with the benchmark lending rate and the average lending rate reported by the PBoC. We also have the data on the monthly average lending rate from one of China's Big Five banks for 2014-2016 (BIG5 AVLR in Fig. 3). Our average lending rate is broadly in line with the two other measures of the average lending rate in China.  For policy shocks linked to loan supply effects, we see that the increase of the reserve requirement ratio coincides with an increase of the average lending rate and a decrease in the loan growth rate. For policy shocks linked to loan demand responses, both the average lending rate and loan growth decline.

Impulse Responses
In the bottom panel, we see that the responses of economic activity generally reveal a similar pattern when monetary policy is captured with the deposit benchmark rate as compared to the reserve requirement ratio. However, we only observe a systematic negative response when monetary policy is transmitted through loan supply responses. The response of the price factor is generally weaker when monetary policy is conducted through changes in the deposit rate than through adjustments in the reserve requirement ratio.
Overall, our findings support the findings of Fernald et al. (2014) and Chen et al. (2017) that market-based policy instruments affect output and prices in China (see also Kamber and Mohanty 2018). While He et al. (2013) do not find that changes in benchmark interest rates matter for output dynamics in China, our results suggest they could matter when the policy shock is primarily transmitted through To assess the economic and relative importance of loan demand and loan supply effects in the transmission of Chinese monetary policy, we now turn to the forecast error variance decomposition of the economic activity measure.

The Transmission of Chinese Monetary Policy
How important are loan supply and loan demand responses for the transmission of monetary policy? To answer this, we quantify the contributions of monetary policy shocks to the forecast error variance of economic activity according to whether they are associated with loan supply or loan demand effects. Table 2 shows the effects of monetary policy shocks on the dynamics of the economic activity factor linked to loan supply and loan demand responses. 18 Table 2 presents the results for the  Table A.7 in Appendix 1 shows the complete FEVD of the economic activity factor including the residual shocks. estimation with the reserve requirement ratio as policy measure. Table 3 reports our findings related to the deposit benchmark rate. These tables further present the sum of both transmission channels, indicating the overall effect of monetary policy and the relative contribution of each channel.
Starting with the reserve requirement ratio as policy instrument, we see in Table 2 that the effects of monetary policy increase steadily over time. After two years, they account for roughly 20% of the forecast variance in the economic activity factor. 19 While these shares are exceptionally high compared to results for Western economies over similar observation periods (see e.g. Ramey 2016), the results support existing findings in the literature that market-based monetary policy instruments are effective policy tools of the PBoC (Fernald et al. 2014;Chen et al. 2017).
Turning to policy shocks associated with loan supply effects (first column of Table 2), we see that it takes roughly a year for substantial output effects to materialize. Policy shocks linked to loan demand dynamics affect economic activity faster than supply effects. In other words, the results suggest that firms and households adjust their demand for bank loans faster than banks' supply of credit changes. After two years, however, we see higher output effects for policy shocks that correspond to loan supply responses. Specifically, monetary policy shocks associated with loan supply effects account for roughly 11% of output dynamics after two years, while policy shocks linked to loan demand effects account for 7%. The relative contributions show that the transmission effects are initially dominated by loan demand effects, but loan supply effects become more important after a year.
With the deposit benchmark rate as policy measure, Table 3 reveals generally similar patterns to the results with the reserve requirement ratio. Again, the overall effects of monetary policy increase over time and policy shocks linked to loan supply dynamics eventually display larger effects on economic activity than loan demand effects. The absolute effects on output are weaker, however. After two Table 2 Forecast error variance decomposition of the economic activity factor (using the reserve requirement ratio as policy measure) Notes: Total contributions correspond to the sum of the effects of the two monetary policy shocks in the FEVD. The relative contributions correspond to policy induced output dynamics associated with either loan supply or loan demand effects. All values are reported in percent and correspond to the point-wise median values of the FEVD distribution of the accepted draws. Values in parentheses represent 68% of the distribution years, exogenous adjustments in the deposit benchmark rate account for roughly 11% of output fluctuations, compared to 17% for changes in the reserve requirement ratio. Interestingly, the decline in the absolute share is mainly due to the relative weak policy effects connected to loan demand responses. The values of policy shocks associated with loan supply effects are similar to the values reported in Table 2. Thus, loan supply responses represent the dominant transmission channel when monetary policy is conducted through benchmark rate adjustments. Table A.9 in Appendix 2 also reports results for an estimation with the lending benchmark rate as policy instrument. The relative share varies between 66% and 86% across various forecast horizons.
To sum up, we find that loan supply dynamics represent an economically relevant transmission mechanism for both policy instruments -the reserve requirement ratio and deposit benchmark rate. Furthermore, loan supply dynamics account for at least 60% of policy-induced output dynamics after two years. We therefore conclude that the credit channel represents an important transmission channel for market-based policy instruments in China.

Robustness Analysis
As we provide the first quantification of the credit channel at the aggregate level in China, we perform extensive robustness checks to validate our FEVD analysis findings. Our sensitivity checks focus on the identification restrictions, construction of the average lending rate, the model specification, data transformations, and sample selection. All robustness checks are summarized in Table 4. 20 Identification First, we control for a possible pass-through of interest rates. We reestimate the baseline model using a spread between the average lending rate and the lending benchmark rate. With our baseline, we require that the average lending rate increases or decreases in the event of a policy contraction, depending on the Table 3 Forecast error variance decomposition of the economic activity factor (using the deposit benchmark rate as policy measure) Notes: Please refer to notes of Table 2 Horizon transmission of the shock. With the spread, we require a stronger change in the lending rate than the benchmark lending rate. We also check estimations in which we apply a shorter sign-restriction horizon, imposing restrictions only on impact and the subsequent month.
Average Lending Rate As we have to construct an average lending rate, we check various definitions. In the baseline estimation, we include an average lending rate that is calculated using the mean values of each surcharge or discount category. We take the upper bound of each price category instead of the mean value (for the category with the largest surcharge, we assume a markup of 150%). Second, as we are primarily interested in the dynamics of an average lending rate, we use principal 1 3 China's Monetary Policy and the Loan Market: How Strong is the… component analysis to summarize the dynamics in the shares of loans priced above or below the benchmark rate in a single average lending factor.

Data Transformation
In the baseline, we follow Fernald et al. (2014) and filter the data with a biweight filter parameter of 36. We also consider estimations with unfiltered data and a parameter of 120. While we follow the literature in our baseline and improve data reliability by approximate economic activity with a broad set of observable indicators, we also check for similar results with a small set of economic activity indicators (see also Fernald et al. 2014).

Specification
The Bayesian information criteria suggest only two lags of the endogenous variables in the FAVAR. However, due to the monthly frequency of our dataset, we further check whether our results change when twelve lags are used. Additionally, because China's economy is an open economy strongly depending on world output and commodity prices, we re-estimate the baseline model first including US output and oil prices in US dollars (see also Fernald et al. 2014) and second including the global output index constructed by Kilian (2009Kilian ( , 2019. 21 Sample After the global financial crisis hit China in 2008, the Chinese government supported the domestic economy with a huge stimulus package. Most of the stimulus funding was channeled through the banking sector. China's monetary authorities encouraged banks to provide bank loans, mainly to state-owned firms. It is likely that bank's supply of loans also responded relatively stronger to policy shocks during this period. We re-estimate the baseline models and exclude the period from July 2008 to March 2010 to test whether indeed strong loan supply effects are present during this period. Finally, we also re-estimate our models using only the observation period for which we have monthly data to calculate the average lending rate (2008M1 to 2016M6). Overall, the results of the various robustness checks confirm our main findings from the baseline specifications. The relative shares of policy induced output dynamics after two years (reported in the fourth column of Table 4) show that loan supply effects generally account for over half of the transmission effects on economic activity. The only reasonable exception is the estimation in which we exclude the recovery period after the global financial crisis. The drop in policy effects associated with loan supply responses supports the hypothesis that loan supply played an important role during this period. However, we also see that loan supply dynamics still matter for the remaining period, albeit to a smaller extent. Analogously, when we reestimate the model with the shorter sample starting in January 2008, in which the global financial crisis takes on more weight in the sample, the effects of monetary policy on economic activity appears more pronounced and the transmission of monetary policy is stronger through loan supply responses. While we find considerably lower effects of overall monetary policy when economic activity is measured with the narrow set of indicators, we still find the same relative importance of loan supply and loan demand effects. 22 Thus, loan supply effects in this estimation also represent an important transmission channel for Chinese monetary policy.

Conclusion
How important is the credit channel for the transmission of Chinese monetary policy? We apply a novel identification scheme that allows us to evaluate monetary policy shocks linked to loan supply effects using aggregated time-series data.
We find robust empirical evidence that market-based policy measures induce output effects linked to loan supply dynamics. After two years, loan supply effects account for roughly 60% of the overall effects of monetary policy shocks on output dynamics. Additionally, we find that it takes roughly one year that loan supply effects unfold completely. Thus, we conclude that the credit channel represents an economically relevant transmission channel for market-based monetary policy measures in China.
Our findings have important policy implications for monetary policy in China. The results suggest that changes in loan supply propagate Chinese monetary policy to a larger extent as compared to changes in loan demand. Consequently, Chinese monetary authorities should first consider the impact on loan markets before conducting new policy actions.
Finally, interesting avenues for future research could be to consider decompositions of alternatively identified monetary policy shocks-e.g. using the a Qual VAR approach by Chen et al. (2017)-or to consider the implications of negative interest rates for the credit channel.   Notes: Please refer to notes of Table 2 Funding Open access funding provided by University of Innsbruck and Medical University of Innsbruck.

Conflicts of Interest None.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http:// creat iveco mmons. org/ licen ses/ by/4. 0/.

Fig. A.7
Impulse responses to to contractionary monetary policy shocks with different loan dynamics (using the lending benchmark rate as monetary policy instrument)