Abstract
The studied slope is located in the middle reach of the Yalong River in the eastern margin of Qinghai-Tibet Plateau in Southwest China. A large hydropower station is planning to be built near the slope. Understanding the stability mechanism of the slope is important for dam site design. Under a combination of tectonic activity, unloading and weathering, the bedrock mass was fractured. On the basis of field investigation, the GSI classification system and Barton criterion were introduced to determine the strength of the rock mass. The kinematic, limit equilibrium and discontinuum modeling methods were carried out to comprehensively understand the stability of the slope. The kinematic analyses show that only wedge mode is possible for large rock mass failure. However, limit equilibrium analyses show that both wedge failure and circular slip are not expected for rock mass. The slope rock mass is now in the surface rebalance stage. The potentially unstable part is the covering deposit. The 40 million m3 surface deposit is now nearly in a limit equilibrium state. The possibility of failure reaches 41%. Mitigation measures must be put into effect on the deposit to assure the stability of the slope. The results indicated that the failure mechanism of the slope was not controlled by the discontinuities in the rock mass at present but depended on the stability of the surface deposit.
Similar content being viewed by others
References
ASTM D2487–11. Standard practice for classification of soils for engineering purposes (Unified Soil Classification System), ASTM International, West Conshohocken, PA, 2011, www.astm.org
Barton N (2002) Some new Q-value correlations to assist in site characterization and tunnel design. Int J Rock Mech Min Sci 39:185–216
Chen Q, Cheng H, Yang Y et al (2014) Quantification of mass wasting volume associated with the giant landslide Daguangbao induced by the 2008 Wenchuan earthquake from persistent scatterer InSAR. Remote Sens Environ 152:125–135
Chen Y, Zhou F, Feng Y, Xia Y (1992) Breach of a naturally embanked dam on Yalong River. Can J Civ Eng 19:811–818
Fan X, Xu Q, Scaringi G et al (2017) Failure mechanism and kinematics of the deadly June 24th 2017 Xinmo landslide, Maoxian, Sichuan, China. Landslides 14:2129–2146
Gong M, Qi S, Liu J (2010) Engineering geological problems related to high geo-stresses at the Jinping I Hydropower Station, Southwest China. Bull Eng Geol Env 69:373–380
Goodman R (1989) Introduction to rock mechanics. Wiley, New York
Guo S, Qi S, Yang G et al (2017) An analytical solution for block toppling failure of rock slopes during an earthquake. Appl Sci 7(10):1008
Gurocak Z, Alemdag S, Zaman M (2008) Rock slope stability and excavatability assessment of rocks at the Kapikaya dam site, Turkey. Eng Geol 96:17–27
Hoek E (1994) Strength of rock and rock masses. ISRM News J 2(2):4–16
Hoek E, Bray J (1981) Rock slope engineering: the institute of mining and metallurgy. Scientific Research Publishing, England, London
Hoek E, Brown ET (2019) The Hoek-Brown failure criterion and GSI-2018 edition. J Rock Mech Geotech Eng 11(3):445–463
Hoek E, Carranza-Torres C, Corkum B (2002) Hoek-Brown, failure criterion – 2002 Edition. In: Proceedings of NARMS-TAC Conference, Toronto, 267-273
Hoek E, Carter TG, Diederichs MS (2013) Quantification of the geological strength index chart. 47th US Rock Mechanics/Geomechanics Symposium, Francisco, CA, USA, 1757–1764
Huang R, Zhao S, Song X (2005) The formation and mechanism analyses of Tiantai landslide, Xuanhan County, Sichuan Province. Hydrogeol Eng Geol 32(1):13–15
Huang R (2009) Some catastrophic landslides since the twentieth century in the southwest of China. Landslides 6:69–81
Huang R, Fan X (2013) Landslide Story Nat Geosci 6:325–326
ISRM (2015) The complete ISRM suggested methods for rock characterization, testing and monitoring: 2007–2014. R. Ulusay (Ed.). Springer International Publishing: Cham, Switzerland
Itasca (2011) Universal Distinct Element Code User’s Guide. Itasca Consulting Group Inc: Minneapolis, Minnesota
Kliche C (1999) Rock slope stability. SME, Littleton
Marinos, P.; Hoek, E. GSI: A geologically friendly tool for rock mass strength estimation. In: Proceedings of GeoEng2000 Conference, Melbourne, 1422–1442
Medley, E (1994) The engineering characterization of melanges and similar block-in- matrix rocks (Bimrocks). Doctoral thesis. University of California at Berkeley
Ning Y, Zhang G, Tang H et al (2019) Process analyses of toppling failure on anti-dip rock slopes under seismic load in Southwest China. Rock Mech Rock Eng 52(4):4439–4455
Shang Y, Yang Z, Li L et al (2003) A super-large landslide in Tibet in 2000: background, occurrence, disaster, and origin. Geomorphology 54:225–243
Sowers GF, Royster DL, (1978) Field investigation. In: Schuster RL, Krizek RJ (Eds.), Landslides: analyses and control. Transportation research board, Special Report, 176. National Academy of Science, Washington, DC
Stead D, Eberhardt E, Coggan J (2006) Developments in the characterization of complex rock slope deformation and failure using numerical modeling techniques. Eng Geol 83:217–235
Tang C, Zhu J, Qi X, Ding J (2011) Landslides induced by the Wenchuan earthquake and the subsequent strong rainfall event: a case study in the Beichuan area of China. Eng Geol 122:22–33
Wang X, Liu G, Yu B et al (2014) 3D coseismic deformations and source parameters of the 2010 Yushu earthquake (China) inferred from DInSAR and multiple-aperture InSAR measurements. Remote Sens Environ 152:174–189
Yin Y, Wang F, Sun P (2009) Landslide hazards triggered by the 2008 Wenchuan earthquake, Sichuan China. Landslides 6:139–152
Acknowledgements
The authors greatly appreciate the supports provided by the National Natural Science Foundation of China (No. 41877212) and the Fundamental Research Funds for the Central Universities (No. 2019B17314)
Author information
Authors and Affiliations
Contributions
CQ performed the simulations and prepared the manuscript with contributions from all co-authors. LL, RL, FG, WZ and HH carried out the field survey and data analyses.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Qi, C., Li, L., Li, R. et al. Stability mechanism recognition and failure risk assessment on a high slope by synthesizing different analysis methods. Nat Hazards 108, 1569–1584 (2021). https://doi.org/10.1007/s11069-021-04745-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11069-021-04745-2