Skip to main content

Advertisement

SpringerLink
Log in

Formation Pressure Estimation Method for High Temperature and High Pressure Wells in Ledong Area of South China Sea

  • Original Paper
  • Published:
Natural Resources Research Aims and scope Submit manuscript

Abstract

The Ledong area is a typical high temperature and high pressure area in the South China Sea's Yinggehai Basin. The geological structure of this basin is complex, with high formation temperature gradient and multiple formation pressure steps. Therefore, accurate evaluation of formation pressure is facing great difficulties. Based on geological and logging data, the genetic mechanism of abnormal high pressure in the Ledong area is as follows. Abnormal high pressure in the Yinggehai Formation and upper strata is caused primarily by under compaction, whereas abnormal high pressure in the Huangliu Formation and lower strata is caused primarily by hydrothermal pressurization and hydrocarbon generation. At the same time, according to the rock strength, mineral composition and rock physical parameters of the unloading mechanism layers in the Ledong area, the influence of effective stress, porosity and shale content on acoustic velocity was obtained by collecting field cores from the Ledong area and conducting rock acoustic testing experiments in laboratory. The acoustic velocity decreased exponentially with decreasing effective stress, and it had a linear relationship with porosity and the square root of shale content, according to the experimental results. Based on the principle of linear superposition, an improved Bowers unloading model for formation pressure evaluation was established. The original model was modified to overcome the shortcomings of the traditional Bowers unloading model, and the effects of effective stress, porosity and shale content on acoustic velocity were considered comprehensively. The improved Bowers unloading model was applied to evaluate the formation pressure of high temperature and high pressure wells in the Ledong area. The results showed that the improved Bowers unloading model had good applicability in the Ledong area, with average error less than 3% in formation pressure. This model will serve as a technical reference for determining formation pressure in the Yinggehai Basin's high temperature and high pressure region.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
Figure 12
Figure 13
Figure 14
Figure 15
Figure 16

Similar content being viewed by others

References

  • Azadpour, M., Shad Manaman, N., Kadkhodaie-Ilkhchi, A., & Sedghipour, M.-R. (2015). Pore pressure prediction and modeling using well-logging data in one of the gas fields in south of Iran. Journal of Petroleum Science and Engineering, 128, 15–23.

    Article  Google Scholar 

  • Booncharoen, P., Rinsiri, T., Paiboon, P., Karnbanjob, S., Ackagosol, S., Chaiwan, P., et al. (2021). Pore pressure estimation by using machine learning model. In International petroleum technology conference, March 23–April 1. https://doi.org/10.2523/IPTC-21490-MS.

  • Bowers, G. L. (1995). Pore Pressure Estimation from Velocity Data: Accounting for Overpressure Mechanisms besides Undercompaction. SPE Drilling & Completion, 10(02), 89–95.

    Article  Google Scholar 

  • Bryant, T. M. (1989). A Dual Shale Pore Pressure Detection Technique. In SPE/IADC Drilling Conference, February 28–March 3, New Orleans, Louisiana, USA. https://doi.org/10.2118/18714-MS.

  • Chen, P. P. H., Chen, Z. Y., & Zhang, Q. M. (1993). Sequence stratigraphy and continental margin development of the Northwestern Shelf of the South China Sea. AAPG Bulletin, 77(5), 842–862.

    Google Scholar 

  • Chen, X. (2019). Overpressure identification and pressure prediction in Yinggehai basin. International Journal of Geosciences, 10, 454–462.

    Article  Google Scholar 

  • Consuegra, J. F. (2021). Pore Pressure Prediction in Sandstone Using a Lateral Transfer Approach. In SPE/IADC Middle East drilling technology conference and exhibition, May 25–27, Abu Dhabi, UAE. https://doi.org/10.2118/202096-MS.

  • Deng, S., Fan, H., Zhou, Y., Zhang, M., Liu, J., & Niu, J. (2015). Pore Pressure Calculation Method for Deepwater Shallow Layers with Log Data. In Offshore technology conference, May 4–7, Houston, Texas, USA. https://doi.org/10.4043/26028-MS.

  • Dutta, N. C., & Khazanehdari, J. (2006). Estimation of formation fluid pressure using high-resolution velocity from inversion of seismic data and a rock physics model based on compaction and burial diagenesis of shales. The Leading Edge, 25(12), 1528–1539.

    Article  Google Scholar 

  • Eaton, B. A. (1972). The effect of overburden stress on geopressure prediction from well logs. Journal of Petroleum Technology, 24(08), 929–934.

    Article  Google Scholar 

  • Fan, C. (2018). Tectonic deformation features and petroleum geological significance in Yinggehai large strike-slip basin, South China Sea. Petroleum Exploration and Development, 45(2), 204–214.

    Article  Google Scholar 

  • Feng, R., Chen, S., & Bryant, S. (2020). Investigation of anisotropic deformation and stress-dependent directional permeability of coalbed methane reservoirs. Rock Mechanics and Rock Engineering, 53, 625–639.

    Article  Google Scholar 

  • Fillippone, W. R. (1979). On The Prediction of Abnormally Pressured Sedimentary Rocks from Seismic Data. In Offshore technology conference, April 30–May 3, Houston, Texas, USA. https://doi.org/10.4043/3662-MS.

  • Ham, H. H. (1966). A method of estimating formation pressures from gulf coast well logs: ABSTRACT. AAPG Bulletin, 50(10), 2322–2322.

    Google Scholar 

  • Hao, F., Li, S. T., Sun, Y. C., & Zhang, Q. M. (1998). Geology, compositional heterogeneities, and geochemical origin of the Yacheng Gas Field, Qiongdongnan Basin, South China Sea. AAPG Bulletin, 82(7), 1372–1384.

    Google Scholar 

  • Harrison, T. M., Wenji, C., Leloup, P. H., Ryerson, F. J., & Tapponnier, P. (1992). An Early Miocene Transition in deformation regime within the Red River Fault Zone, Yunnan, and its significance for Indo-Asian tectonics. Journal of Geophysical Research: Solid Earth, 97(B5), 7159–7182.

    Article  Google Scholar 

  • Holbrook, P. W., & Hauck, M. L. (1987). A petrophysical-mechanical math model for real-time wellsite pore pressure/fracture gradient prediction. In SPE annual technical conference and exhibition, September 27–30, Dallas, Texas, USA. https://doi.org/10.2118/16666-MS.

  • Hottmann, C. E., & Johnson, R. K. (1965). Estimation of formation pressures from log-derived shale properties. Journal of Petroleum Technology, 17(06), 717–722.

    Article  Google Scholar 

  • Ji, R. Y., & Fan, H. H. (2010). Improvement and application of bowers’ velocity effective-stress method in pore pressure estimation. In International Oil and Gas Conference and Exhibition in China, June 8–10, Beijing, China. https://doi.org/10.2118/131199-MS.

  • Jorden, J. R., & Shirley, O. J. (1966). Application of drilling performance data to overpressure detection. Journal of Petroleum Technology, 18(11), 1387–1394.

    Article  Google Scholar 

  • Karimi, M., Adelzadeh, M. R., & Mohammadypour, M. (2014). Formula of definite point overburden pressure of reservoir layers. Egyptian Journal of Petroleum, 23(2), 175–182.

    Article  Google Scholar 

  • Khaksar, A., & Griffiths, C. (2000). Effects of porosity and clay content on P- and S-wave velocities in cooper basin sandstones. Exploration Geophysics, 31(1–2), 433–440.

    Article  Google Scholar 

  • Lee, K., Lim, J., Yoon, D., & Jung, H. (2019). Prediction of shale-gas production at Duvernay formation using deep-learning algorithm. SPE Journal, 24(06), 2423–2437.

    Article  Google Scholar 

  • Liu, A., Zhou, J., Chen, D., Ou, B., Fan, C., & Li, W. (2015). High temperature overpressure basin reservoir and pressure prediction model. Open Journal of Marine Science, 05, 265–272.

    Article  Google Scholar 

  • Liu, L. B., Shen, G. Q., Wang, Z. T., Yang, H. W., Han, H. W., & Cheng, Y. F. (2018a). Abnormal formation velocities and applications to pore pressure prediction. Journal of Applied Geophysics, 153, 1–6.

    Article  Google Scholar 

  • Liu, R., Hao, F., Zhu, W. L., Liu, J. Z., Xie, Y. H., Wang, Z. F., et al. (2018b). Variation of system openness and geochemical features in overpressured sandstones of the Yinggehai Basin, offshore South China Sea. Marine and Petroleum Geology, 92, 179–192.

    Article  Google Scholar 

  • Liu, Z., Sun, D., Li, W., Liu, M., Xia, L., & Liu, J. (2017). Research advances in the formation poredynamics of sedimentary basins. Petroleum Research, 2(2), 107–130.

    Article  Google Scholar 

  • Luo, X., & Vasseur, G. (2016). Overpressure dissipation mechanisms in sedimentary sections consisting of alternating mud-sand layers. Marine and Petroleum Geology, 78, 883–894.

    Article  Google Scholar 

  • Mann, D. M., & Mackenzie, A. S. (1990). Prediction of pore fluid pressures in sedimentary basins. Marine and Petroleum Geology, 7(1), 55–65.

    Article  Google Scholar 

  • Markovic, M., Brankovic, J. M., Stosovic, M. A., Zivkovic, S., & Brankovic, B. (2021). A new method for pore pressure prediction on malfunctioning cells using artificial neural networks. Water Resources Management, 35(3), 979–992.

    Article  Google Scholar 

  • Morales-Salazar, J. P., Samaniego-Verduzco, F., & García-Herrera, M. G. (2020). A pore-pressure equation for carbonates. SPE Drilling & Completion, 35(02), 191–200.

    Article  Google Scholar 

  • Osarogiagbon, A. U., Oloruntobi, O., Khan, F., Venkatesan, R., & Gillard, P. (2021). Combining porosity and resistivity logs for pore pressure prediction. Journal of Petroleum Science and Engineering, 205, 108819.

  • Rasmus, J. C., & Gray-Stephens, D. M. R. (1991). Real-time pore-pressure evaluation from MWD/LWD measurements and drilling-derived formation strength. SPE Drilling Engineering, 6(04), 264–272.

    Article  Google Scholar 

  • Rehm, B., & McClendon, R. (1971). Measurement of formation pressure from drilling data. In Fall meeting of the Society of Petroleum Engineers of AIME, October 3–6, New Orleans, Louisiana, USA. https://doi.org/10.2118/3601-MS.

  • Satti, I. A., Ghosh, D. P., Yusoff, W. I. W., & Hoesni, M. J. (2015). Origin of overpressure in a field in the Southwestern Malay Basin. SPE Drilling & Completion, 30(03), 198–211.

    Article  Google Scholar 

  • Sayers, C. M. (2006). An introduction to velocity-based pore-pressure estimation. The Leading Edge, 25(12), 1496–1500.

    Article  Google Scholar 

  • Scott, D., & Thomsen, L. A. (1993). A global algorithm for pore pressure prediction. In Middle east oil show, April 3–6, Bahrain. https://doi.org/10.2118/25674-MS.

  • Sibson, R. H. (2000). Tectonic controls on maximum sustainable overpressure: Fluid redistribution from stress transitions. Journal of Geochemical Exploration, 69–70, 471–475.

    Article  Google Scholar 

  • Sun, Z., Zhou, D., Zhong, Z. H., Zeng, Z. X., & Wu, S. M. (2003). Experimental evidence for the dynamics of the formation of the Yinggehai basin, NW South China Sea. Tectonophysics, 372(1–2), 41–58.

    Article  Google Scholar 

  • Wan, Z., Xia, B., Lü, B., Cai, Z., & Liu, W. (2012). Yinggehai basin gas exploration: Comparison with Jiyang depression. Journal of Earth Science, 23(3), 359–372.

    Article  Google Scholar 

  • Wang, Z., & Wang, R. (2015). Pore pressure prediction using geophysical methods in carbonate reservoirs: Current status, challenges and way ahead. Journal of Natural Gas Science and Engineering, 27, 986–993.

    Article  Google Scholar 

  • Wang, Z. F., & Huang, B. J. (2008). Dongfang 1–1 gas field in the mud diapir belt of the Yinggehai Basin, South China Sea. Marine and Petroleum Geology, 25(4–5), 445–455.

    Google Scholar 

  • Weakley, R. R. (1991). Use of surface seismic data to predict formation pore pressure worldwide. In SPE Western regional meeting, March 20–22, Long Beach, California, USA. https://doi.org/10.2118/21752-MS.

  • Xia, K., Zhou, D., Su, D., Flueh, E. R., Ye, S., He, H., et al. (1998). The velocity structure of the Yinggehai Basin and its hydrocarbon implication. Chinese Science Bulletin, 43(24), 2047–2054.

    Article  Google Scholar 

  • Xie, X., Muller, R. D., Ren, J., Jiang, T., & Zhang, C. (2008). Stratigraphic architecture and evolution of the continental slope system in offshore Hainan, northern South China Sea. Marine Geology, 247(3–4), 129–144.

    Article  Google Scholar 

  • Yang, J., Liu, S., Wang, H., Zhou, X., Song, Y., Xie, R., Zhang, Z., Yin, Q., & Xu, F. (2021). A novel method for fracture pressure prediction in shallow formation during deep-water drilling. Journal of Energy Resources Technology, 144(3), 033005. https://doi.org/10.1115/1.4051394

    Article  Google Scholar 

  • Yu, H., Chen, G., & Gu, H. (2020). A machine learning methodology for multivariate pore-pressure prediction. Computers & Geosciences, 143, 104548.

    Article  Google Scholar 

  • Zhang, J. (2011). Pore pressure prediction from well logs: Methods, modifications, and new approaches. Earth-Science Reviews, 108(1), 50–63.

    Article  Google Scholar 

  • Zhang, J. (2013). Effective stress, porosity, velocity and abnormal pore pressure prediction accounting for compaction disequilibrium and unloading. Marine and Petroleum Geology, 45, 2–11.

    Article  Google Scholar 

  • Zhang, J., & Wieseneck, J. (2011). Challenges and surprises of abnormal pore pressures in shale gas formations. In SPE annual technical conference and exhibition, March 23- April 1. https://doi.org/10.2118/145964-MS.

  • Zhao, Z., Sun, Z., Huang, H., & Sun, L. (2020). The Red River sediment budget in the Yinggehai and Qiongdongnan basins, northwestern South China Sea, and its tectonic implications. International Geology Review, 62(7–8), 1019–1035.

    Article  Google Scholar 

Download references

Acknowledgments

This work has been supported by the Natural Science Foundation of China (No.51434009 and No.51774301), the major projects of National Science and Technology (2016ZX05024005) and China Scholarship Council (CSC).

Author information

Authors and Affiliations

  1. College of Safety and Ocean Engineering, China University of Petroleum-Beijing, Beijing, 102249, China

    Zhenxiang Zhang, Jin Yang, Qibin Ou, Yichi Zhang & Ximo Qu

  2. SINOPEC Yanshan Company, Beijing, 102500, China

    Yafei Guo

Authors
  1. Zhenxiang Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Jin Yang
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Qibin Ou
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Yichi Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Ximo Qu
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Yafei Guo
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Jin Yang.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhang, Z., Yang, J., Ou, Q. et al. Formation Pressure Estimation Method for High Temperature and High Pressure Wells in Ledong Area of South China Sea. Nat Resour Res 30, 4807–4824 (2021). https://doi.org/10.1007/s11053-021-09931-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11053-021-09931-4

Keywords

Search

Navigation