Abstract
We present a goal-oriented a posteriori error estimator for finite element approximations of a class of homogenization problems. As a rule, homogenization problems are defined through the coupling of a macroscopic solution and the solution of auxiliary problems. In this work we assume that the homogenized problem is known and that it depends on a finite number of auxiliary problems. The accuracy in the goal functional depends therefore on the discretization error of the macroscopic and the auxiliary solutions. We show that it is possible to compute the error contributions of all solution components separately and use this information to balance the different discretization errors. Additionally, we steer a local mesh refinement for both the macroscopic problem and the auxiliary problems. The high efficiency of this approach is shown by numerical examples. These include the upscaling of a periodic diffusion tensor, the case of a Stokes flow over a porous bed, and the homogenization of a fuel cell model which includes the flow in a gas channel over a porous substrate coupled with a multispecies nonlinear transport equation.
Similar content being viewed by others
References
Abdulle, A., Nonnenmacher, A.: A posteriori error analysis of the heterogeneous multiscale method for homogenization problems. Comptes Rendus Mathematique 347(17–18), 1081–1086 (2009)
Abdulle, A., Nonnenmacher, A.: Adaptive finite element heterogeneous multiscale method for homogenization problems. Comput. Methods Appl. Mech. Eng. 200(37–40), 2710 – 2726 (2011). Special issue on modeling error estimation and adaptive modeling
Abdulle, A., Nonnenmacher, A.: A posteriori error estimates in quantities of interest for the finite element heterogeneous multiscale method. Numer. Methods Partial Differ. Equ. 29(5), 1629–1656 (2013)
Alexanderian, A., Rathinam, M., Rostamian, R.: Homogenization, symmetry, and periodization in diffusive random media. Acta Math. Sci. 32(1), 129–154 (2012)
Allaire, G.: Homogenization and two-scale convergence. SIAM J. Math. Anal. 23(6), 1482–1518 (1992)
Allaire, G., Piatnitski, A.: Homogenization of the schrödinger equation and effective mass theorems. Commun. Math. Phys. 258(1), 1–22 (2005)
Bangerth, W., Heister, T., Heltai, L., Kanschat, G., Kronbichler, M., Maier, M., Turcksin, B., Young, T.D.: The deal.ii library, version 8.1. arXiv preprint, arXiv:1312.2266 (2013)
Bangerth, W., Rannacher, R.: Adaptive Finite Element Methods for Differential Equations. Birkhäuser Verlag, Basel (2003)
Barth, W.L., Carey, G.F.: On a boundary condition for pressure-driven laminar flow of incompressible fluids. Int. J. Numer. Methods Fluids 54(11), 1313–1325 (2007)
Beavers, G.S., Joseph, D.D.: Boundary conditions at a naturally permeable wall. J. Fluid Mech. 30(1), 197–207 (1967)
Becker, R., Braack, M., Meidner, D., Rannacher, R., Vexler, B.: Adaptive finite element methods for PDE-constrained optimal control problems. In: Jäger, W., Rannacher, R., Warnatz, J. (eds.) Reactive Flows, Diffusion and Transport, pp. 177–205. Springer, Berlin (2007)
Becker, R., Rannacher, R.: An optimal control approach to a posteriori error estimation in finite element methods. Acta Numer. 10, 1–102 (2001)
Bensoussan, A., Lions, J.L., Papanicolaou, G.: Asymptotic Analysis for Periodic Structures. Studies in Mathematics and Its Applications. North-Holland Pub. Co., New York (1978)
Bourgeat, A., Piatnitski, A.: Approximations of effective coefficients in stochastic homogenization. Annales de l’Institut Henri Poincare (B) Probability and Statistics 40(2), 153–165 (2004)
Bove, R., Ubertini, S.: Modeling solid oxide fuel cell operation: approaches, techniques and results. J. Power Sources 159(1), 543–559 (2006)
Brenner, S.C., Scott, L.: The Mathematical Theory of Finite Element Methods. Texts in Applied Mathematics, 2nd edn. Springer, Berlin (2002)
Carraro, T., Goll, C., Marciniak-Czochra, A.: Mikelic̀ A.: Pressure jump interface law for the Stokes-Darcy coupling: confirmation by direct numerical simulations. J. Fluid Mech. 732, 510–536 (2013)
Carraro, T., Heuveline, V., Rannacher, R.: Determination of kinetic parameters in laminar flow reactors. I. Theoretical aspects. In: Rannacher, W.J.R., Warnatz, J. (eds.) Reactive Flows. Diffusion and Transport. Springer, Berlin (2007)
Carraro, T., Joos, J., Rüger, B., Weber, A., Ivers-Tiffée, E.: 3D finite element model reconstructed mixed-conducting cathodes: I. Performance quantication. Electrochim. Acta 77, 315–323 (2012)
Carstensen, C., Verfurth, R.: Edge residuals dominate a posteriori error estimates for low order finite element methods. SIAM J. Numer. Anal. 36(5), 1571–1587 (1999)
Ciarlet, P.G.: Finite Element Method for Elliptic Problems. Society for Industrial and Applied Mathematics, Philadelphia (2002)
Cioranescu, D., Donato, P.: An introduction to Homogenization. No. 17 in Oxford Lecture Series in Mathematics and Its Applications ; 17 ; Oxford Lecture Series in Mathematics and Its Applications. Oxford University Press, Oxford [u.a.] (1999)
Cioranescu, D., Donato, P., Zaki, R.: The periodic unfolding method in perforated domains. Portugaliae Mathematica 63(4), 467–496 (2006)
Cook, B.: Introduction to fuel cells and hydrogen technology. Eng. Sci. Educ. J. 11, 205–216 (2002)
Ender, M., Joos, J., Carraro, T., Ivers-Tiffée, E.: Quantitative characterization of LiFePO4 cathodes reconstructed by FIB/SEM tomography. J. Electrochem. Soc. 159(7), A972–A980 (2012)
Goll, C.: Design of numerical methods for simulation models of a solid oxide fuel cell. Ph.D. thesis, Heidelberg University (2015)
Hirschfelder, J., Curtiss, C.: Theory of propagation of flames. Part I: General equations. Symp. Combust. Flame Explos. Phenom. 3(1), 121–127 (1948)
Hornung, U. (ed.): Homogenization and Porous Media. Springer-Verlag, New York, NY (1997)
Jäger, W., Mikelić, A.: On the interface boundary condition of Beavers, Joseph, and Saffman. SIAM J. Appl. Math. 60(4), 1111–1127 (2000)
Jäger, W., Mikelić, A., Neuss, N.: Asymptotic analysis of the laminar viscous flow over a porous bed. SIAM J. Sci. Comput. 22(6), 2006–2028 (2000)
Maier, M.: Duality-based adaptivity in heterogeneous multiscale finite element discretization. Ph.D. thesis, Heidelberg University (2015)
Marciniak-Czochra, A., Mikelić, A.: Effective pressure interface law for transport phenomena between an unconfined fluid and a porous medium using homogenization. Multiscale Model. Simul. 10(2), 285–305 (2012)
Oden, J.T., Prudhomme, S., Romkes, A., Bauman, P.T.: Multiscale modeling of physical phenomena: adaptive control of models. SIAM J. Sci. Comput 28, 2359–2389 (2005)
Ohlberger, M.: A posteriori error estimates for the heterogeneous multiscale finite element method for elliptic homogenization problems. Multiscale Model. Simul. 4(1), 88–114 (2005)
Rannacher, R.: Adaptive finite element discretization of flow problems for goal-oriented model reduction. In: Choi, H., Choi, H., Yoo, J. (eds.) Computational Fluid Dynamics 2008, pp. 31–45. Springer, Berlin Heidelberg (2009)
Rannacher, R., Suttmeier, F.T.: A posteriori error estimation and mesh adaptation for finite element models in elasto-plasticity. Comput. Methods Appl. Mech. Eng. 176(1–4), 333–361 (1999). doi:10.1016/S0045-7825(98)00344-2. http://www.sciencedirect.com/science/article/pii/S0045782598003442
Rannacher, R., Vihharev, J.: Adaptive finite element analysis of nonlinear problems: balancing of discretization and iteration errors. J. Numer. Math. 21(1), 23–62 (2013)
Reitz, W.: Handbook of fuel cells: fundamentals, technology, and applications, (volume 2). In: Vielstich, W., Lamm, A., Gasteiger, H.A. (eds.). Mater. Manuf. Process. 22(6), 789–789 (2007)
Rheinboldt, W.C., Mesztenyi, C.K.: On a data structure for adaptive finite element mesh refinements. ACM Trans. Math. Softw. 6(2), 166–187 (1980)
Richter, T.: Parallel multigrid method for adaptive finite elements with application to 3D flow problems. Ph.D. thesis, Mathematisch-Naturwissenschaftliche Gesamtfakultät, Universität Heidelberg (2005)
Richter, T.: A posteriori error estimation and anisotropy detection with the dual-weighted residual method. Int. J. Numer. Methods Fluids 62(1), 90–118 (2010)
Richter, T., Wick, T.: Variational localizations of the dual weighted residual estimator. J. Comput. Appl. Math. 279, 192–208 (2015)
Sab, K., Nedjar, B.: Periodization of random media and representative volume element size for linear composites. Comptes Rendus Mécanique 333(2), 187–195 (2005)
Saffman, P.G.: On the boundary condition at the interface of a porous medium. Stud. Appl. Math. 1, 93–101 (1971)
Schäfer, M., Turek, J.: Benchmark Computations of Laminar Flow Around a Cylinder. Vieweg, Braunschweig (1996)
Tartar, L.: The general theory of homogenization. A personalized introduction. Springer, Berlin (2009)
Tseronis, K., Kookos, I., Theodoropoulos, C.: Modelling mass transport in solid oxide fuel cell anodes: a case for a multidimensional dusty gas-based model. Chem. Eng. Sci. 63, 5626–5638 (2008)
Zhikov, V., Kozlov, S., Oleinik, O.: Homogenization of Differential Operators and Integral Functionals. Springer, Berlin (1994)
Acknowledgements
TC was supported by the German Research Council (DFG) through project “Multiscale modeling and numerical simulations of Lithium ion battery electrodes using real microstructures” (CA 633/2-1).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Carraro, T., Goll, C. A Goal-Oriented Error Estimator for a Class of Homogenization Problems. J Sci Comput 71, 1169–1196 (2017). https://doi.org/10.1007/s10915-016-0338-y
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10915-016-0338-y