Skip to main content

Advertisement

SpringerLink
Log in

Facile synthesis of akermanite powder using microwave-assisted sol–gel method for biomedical applications

  • Materials for life sciences
  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

Akermanite (Ak) has promising prospects as an innovative bio-ceramic for bone regeneration. The most common fabrication methods to produce pure Ak powders are long-lasting synthesis routes followed by calcination at high temperatures. This study focuses on the use of microwave irradiation of a solution to provide initial Ak-based powder product that after subsequent heat treatment changes to pure Ak powder. The novel process named microwave-assisted sol–gel method actually speeds up the initial and final stages of pure Ak powder production when compared to the traditional sol–gel with later heat treatment stage. The viscous solution containing magnesium nitrate hexahydrate, calcium nitrate tetrahydrate, and tetraethyl ortho-silicate was microwave irradiated for three minutes. X-ray diffraction showed that the microwaved products after calcination treatment at 1200 °C for 4 h were mostly made of Ak and a small amount of merwinite. However, by increasing the calcination treatment to 1300 °C, single-phase akermanite powder was achieved. By subjecting same precursor and subsequent heat treatments, the typical sol–gel method did not yield pure Ak powder. Thermal analyses and scanning electron microscopy examinations showed that the Ak crystallization temperature was lower in the case of the microwave irradiated product than in the conventional sol–gel route. The microwave irradiated product after calcination showed a porous structure formed by necking between the powder particles with a mean particle size of 2 µm. The results of the in vitro bioactivity evaluation indicated that synthesized Ak was bioactive through proving the formation of hydroxyapatite (HAp) on the surface of pure Ak disc after 7 days of immersion in simulated body fluid (SBF). The cell adhesion findings showed that MG-63 cells adhered and spread well on the Ak disc, suggesting that Ak discs possess good biocompatibility. The results of the MTT assay demonstrated that the cell proliferation of osteoblast-like MG-63 cells was enhanced with the increase in culture time. Our in vitro bioactivity, cell morphology, and adhesion evaluations and in vitro biocompatibility assessment suggested that Ak powders were bioactive and cytocompatible and have a great potential to be selected as an ideal candidate for bone tissue engineering applications.

Graphical Abstract

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10

Similar content being viewed by others

References

  1. Farag MM (2023) Recent trends on biomaterials for tissue regeneration applications. J Mater Sci 58(2):527–558. https://doi.org/10.1007/s10853-022-08102-x

    Article  CAS  Google Scholar 

  2. Singh P, Yu X, Kumar A, Dubey AK (2022) Recent advances in silicate-based crystalline bioceramics for orthopedic applications: a review. J Mater Sci 57(28):13109–13151. https://doi.org/10.1007/s10853-022-07444-w

    Article  CAS  Google Scholar 

  3. Kheradmandfard M, Mahdavi K, Kharazi AZ, Kashani-Bozorg SF, Kim DE (2020) In vitro study of a novel multi-substituted hydroxyapatite nanopowder synthesized by an ultra-fast, efficient and green microwave-assisted method. Mater Sci Eng C 117:111310

    Article  CAS  Google Scholar 

  4. Carrodeguas RG, De Aza S (2011) α-Tricalcium phosphate: Synthesis, properties and biomedical applications. Acta Biomater 7(10):3536–3546

    Article  CAS  Google Scholar 

  5. Eliaz N, Metoki N (2017) Calcium phosphate bioceramics: a review of their history, structure, properties, coating technologies and biomedical applications. Materials 10(4):334

    Article  Google Scholar 

  6. Xin R, Leng Y, Chen J, Zhang Q (2005) A comparative study of calcium phosphate formation on bioceramics in vitro and in vivo. Biomaterials 26(33):6477–6486

    Article  CAS  Google Scholar 

  7. Bouler JM, Pilet P, Gauthier O, Verron E (2017) Biphasic calcium phosphate ceramics for bone reconstruction: a review of biological response. Acta Biomater 53:1–12

    Article  CAS  Google Scholar 

  8. Askari E, Naghib SM, Seyfoori A, Javidi MA, Ansari AM (2022) Highly bioactive Akermanite-Monticellite nanocomposites for bone tissue engineering: a tunable three-dimensional biological study. J Marter Res Technol 20:4066–4076

    Article  CAS  Google Scholar 

  9. Srinath P, Abdul Azeem P, Venugopal Reddy K (2020) Review on calcium silicate-based bioceramics in bone tissue engineering. Int J Appl Ceram Technol 17(5):2450–2464

    Article  CAS  Google Scholar 

  10. Razavi M, Fathi M, Savabi O, Vashaee D, Tayebi L (2015) In vivo study of nanostructured akermanite/PEO coating on biodegradable magnesium alloy for biomedical applications. J Biomed Mater Res Part A 103(5):1798–1808

    Article  Google Scholar 

  11. Zadehnajar P, Mirmusavi MH, Soleymani Eil Bakhtiari S, Bakhsheshi-Rad HR, Karbasi S, RamaKrishna S, Berto F (2021) Recent advances on akermanite calcium-silicate ceramic for biomedical applications. Int J Appl Ceram Technol 18(6):1901–1920

    Article  CAS  Google Scholar 

  12. Deng Y, Zhang M, Chen X, Pu X, Liao X, Huang Z, Yin G (2017) A novel akermanite/poly (lactic-co-glycolic acid) porous composite scaffold fabricated via a solvent casting-particulate leaching method improved by solvent self-proliferating process. Regen Biomater 4(4):233–242

    Article  CAS  Google Scholar 

  13. Arastouei M, Khodaei M, Atyabi SM, Nodoushan MJ (2020) Poly lactic acid-akermanite composite scaffolds prepared by fused filament fabrication for bone tissue engineering. J Mater Res Technol 9(6):14540–14548

    Article  CAS  Google Scholar 

  14. Gómez-Cerezo MN, Patel R, Vaquette C, Grøndahl L, Lu M (2022) In vitro evaluation of porous poly (hydroxybutyrate-co-hydroxyvalerate)/akermanite composite scaffolds manufactured using selective laser sintering. Biomater Adv 212748

  15. Cui J, Xia L, Lin K, Wang X (2021) In situ construction of a nano-structured akermanite coating for promoting bone formation and osseointegration of Ti–6Al–4V implants in a rabbit osteoporosis model. J Mater Chem B 9(46):9505–9513

    Article  CAS  Google Scholar 

  16. Wu C, Chang J (2004) Synthesis and apatite-formation ability of akermanite. Mater Lett 58(19):2415–2417

    Article  CAS  Google Scholar 

  17. Choudhary R, Koppala S, Swamiappan S (2015) Bioactivity studies of calcium magnesium silicate prepared from eggshell waste by sol–gel combustion synthesis. J Asian Ceram Soc 3(2):173–177

    Article  Google Scholar 

  18. Collin MS, Venkatraman SK, Sriramulu M, Shanmugam S, Drweesh EA, Elnagar MM, Mosa ES, Sasikumar S (2021) Solution combustion synthesis of functional diopside, akermanite, and merwinite bioceramics: excellent biomineralization, mechanical strength, and antibacterial ability. Mater Today Commun 27:102365

    Article  CAS  Google Scholar 

  19. Tavangarian F, Zolko CA, Davami K (2021) Synthesis, characterization and formation mechanisms of nanocrystalline akermanite powder. J Mater Res Technol 11:792–800

    Article  CAS  Google Scholar 

  20. Sharafabadi AK, Abdellahi M, Kazemi A, Khandan A, Ozada N (2017) A novel and economical route for synthesizing akermanite (Ca2MgSi2O7) nano-bioceramic. Mater Sci Eng C 71:1072–1078

    Article  CAS  Google Scholar 

  21. Alecu AE, Costea CC, Surdu VA, Voicu G, Jinga SI, Busuioc C (2022) Processing of calcium magnesium silicates by the sol–gel route. Gels 8(9):574

    Article  CAS  Google Scholar 

  22. Minouei H, Jalaly M, Kheradmandfard M, Rizi MS, Kim DE, Hong SI (2023) Rapid microwave-assisted synthesis and magnetic properties of high-entropy spinel (Cr0.2Mn0.2Fe0.2Co0.2-xNi0.2Znx)3O4 nanoparticles. Ceram Int 49(8):11885–11892

  23. Kheradmandfard M, Minouei H, Tsvetkov N, Vayghan AK, Kashani-Bozorg SF, Kim G, Hong SI, Kim DE (2021) Ultrafast green microwave-assisted synthesis of high-entropy oxide nanoparticles for Li-ion battery applications. Mater Chem Phys 262:124265

    Article  CAS  Google Scholar 

  24. Kheradmandfard M, Kashani-Bozorg SF, Noori-Alfesharaki AH, Kharazi AZ, Kheradmandfard M, Abutalebi N (2018) Ultra-fast, highly efficient and green synthesis of bioactive forsterite nanopowder via microwave irradiation. Mater Sci Eng C 92:236–244

    Article  CAS  Google Scholar 

  25. Romeiro FDC, Martins AS, Perini JAL, Silva BCE, Zanoni MVB, Orlandi MO (2023) Microwave-assisted hydrothermal synthesis of Sn3O4 and SnO for electrocatalytic reduction of CO2 to high-added-value compounds. J Mater Sci 58(8):3508–3519. https://doi.org/10.1007/s10853-023-08230-y

    Article  CAS  Google Scholar 

  26. Kheradmandfard M, Kashani-Bozorg SF, Barati MR, Sarfarazijami S (2023) A novel strategy for fast and facile synthesis of bioactive bredigite nanoparticles using microwave-assisted method. J Mater Res Technol 25:1735–1747

    Article  CAS  Google Scholar 

  27. Kheradmandfard M, Noori-Alfesharaki AH, Zargar-Kharazi A, Kheradmandfard M, Kashani-Bozorg SF (2018) Ultra-fast microwave-assisted synthesis of diopside nanopowder for biomedical applications. Ceram Int 44(15):18752–18758

    Article  CAS  Google Scholar 

  28. Minouei H, Tsvetkov N, Kheradmandfard M, Han J, Kim DE, Hong SI (2022) Tuning the electrochemical performance of high-entropy oxide nanopowder for anode Li-ion storage via structural tailoring. J Power Sources 549:232041

    Article  CAS  Google Scholar 

  29. Wojnarowicz J, Chudoba T, Lojkowski W (2020) A review of microwave synthesis of zinc oxide nanomaterials: Reactants, process parameters and morphologies. Nanomaterials 10(6):1086

    Article  CAS  Google Scholar 

  30. Wu C, Chang J (2006) A novel akermanite bioceramic: preparation and characteristics. J Biomater Appl 21(2):119–129

    Article  Google Scholar 

  31. Hou X, Yin G, Chen X, Liao X, Yao Y, Huang Z (2011) Effect of akermanite morphology on precipitation of bone-like apatite. Appl Surf Sci 257(8):3417–3422

    Article  CAS  Google Scholar 

  32. Rahmati M, Fathi M, Ahmadian M (2018) Preparation and structural characterization of bioactive bredigite (Ca7MgSi4O16) nanopowder. J Alloy Compd 732:9–15

    Article  CAS  Google Scholar 

  33. Hafezi-Ardakani M, Moztarzadeh F, Rabiee M, Talebi AR (2011) Synthesis and characterization of nanocrystalline merwinite (Ca3Mg (SiO4) 2) via sol–gel method. Ceram Int 37(1):175–180

    Article  CAS  Google Scholar 

  34. Jinga SI, Constantinoiu I, Surdu VA, Iordache F, Busuioc C (2019) Sol–gel-derived mineral scaffolds within SiO2–P2O5–CaO–MgO–ZnO–CaF2 system. J Sol-Gel Sci Technol 90(2):411–421

    Article  CAS  Google Scholar 

  35. Negrea R, Busuioc C, Constantinoiu I, Miu D, Enache C, Iordache F, Jinga SI (2019) Akermanite-based coatings grown by pulsed laser deposition for metallic implants employed in orthopaedics. Surf Coat Technol 357:1015–1026

    Article  CAS  Google Scholar 

  36. Najafinezhad A, Abdellahi M, Ghayour H, Soheily A, Chami A, Khandan A (2017) A comparative study on the synthesis mechanism, bioactivity and mechanical properties of three silicate bioceramics. Mater Sci Eng C 72:259–267

    Article  CAS  Google Scholar 

  37. Han Z, Feng P, Gao C, Shen Y, Shuai C, Peng S (2014) Microstructure, mechanical properties and in vitro bioactivity of akermanite scaffolds fabricated by laser sintering. Bio-Med Mater Eng 24(6):2073–2080

    Article  CAS  Google Scholar 

  38. Huang Y, Wu C, Zhang X, Chang J, Dai K (2018) Regulation of immune response by bioactive ions released from silicate bioceramics for bone regeneration. Acta Biomater 66:81–92

    Article  CAS  Google Scholar 

  39. Gu H, Guo F, Zhou X, Gong L, Zhang Y, Zhai W, Chen L, Cen L, Yin S, Chang J, Cui L (2011) The stimulation of osteogenic differentiation of human adipose-derived stem cells by ionic products from akermanite dissolution via activation of the ERK pathway. Biomaterials 32(29):7023–7033

    Article  CAS  Google Scholar 

  40. Xynos ID, Edgar AJ, Buttery LD, Hench LL, Polak JM (2001) Gene-expression profiling of human osteoblasts following treatment with the ionic products of Bioglass® 45S5 dissolution. J Biomed Mater Res 55(2):151–157

    Article  CAS  Google Scholar 

  41. Valerio P, Pereira MM, Goes AM, Leite MF (2004) The effect of ionic products from bioactive glass dissolution on osteoblast proliferation and collagen production. Biomaterials 25(15):2941–2948

    Article  CAS  Google Scholar 

  42. Kheradmandfard M, Penkov OV, Kashani-Bozorg SF, Lee JS, Kim CL, Khadem M, Cho SW, Hanzaki AZ, Kim DE (2022) Exceptional improvement in the wear resistance of biomedical β-type titanium alloy with the use of a biocompatible multilayer Si/DLC nanocomposite coating. Ceram Int 48(12):17376–17384

    Article  CAS  Google Scholar 

  43. Kim SR, Lee JH, Kim YT, Riu DH, Jung SJ, Lee YJ, Chung SC, Kim YH (2003) Synthesis of Si, Mg substituted hydroxyapatites and their sintering behaviors. Biomaterials 24(8):1389–1398

    Article  Google Scholar 

Download references

Acknowledgements

The authors express their gratitude to the Iran National Science Foundation (under project No. 99029117), the Center of Excellence for Surface Engineering and Corrosion Protection of Industries, University of Tehran, and Iran Nanotechnology Initiative Council.

Author information

Authors and Affiliations

  1. Center of Excellence for Surface Engineering and Corrosion Protection of Industries, School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran

    Nilufar Balighieh, Seyed Farshid Kashani-Bozorg, Mehdi Kheradmandfard & Mohammad Reza Barati

Authors
  1. Nilufar Balighieh
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Seyed Farshid Kashani-Bozorg
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Mehdi Kheradmandfard
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Mohammad Reza Barati
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding authors

Correspondence to Seyed Farshid Kashani-Bozorg or Mehdi Kheradmandfard.

Ethics declarations

Conflict of interest

The authors declare no conflicts of interest.

Additional information

Handling Editor: Annela M. Seddon.

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Balighieh, N., Kashani-Bozorg, S.F., Kheradmandfard, M. et al. Facile synthesis of akermanite powder using microwave-assisted sol–gel method for biomedical applications. J Mater Sci 58, 17066–17079 (2023). https://doi.org/10.1007/s10853-023-09099-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10853-023-09099-7

Search

Navigation